Problem - add in plugin PowerShell PowerShell host

Similar Questions

• VSphere Orchestrator (vco) - problem to add a Powershell host

  Hello world

  I am currently set up a VSphere Orchestrator server and I have a few problems to add a new host via WinRM with Add a PowerShell host model.

  I followed this tutorial:

  http://blogs.technet.com/b/meamcs/archive/2012/02/25/how-to-force-WinRM-to-listen-interfaces-over-HTTPS.aspx

  I can connect with Powershell to a second server HTTPS but not with the vco...

  This is my setup:

  PS WSMan:\localhost\Client> winrm get winrm/config
  Config
      MaxEnvelopeSizekb = 500
      MaxTimeoutms = 60000
      MaxBatchItems = 32000
      MaxProviderRequests = 4294967295
      Client
          NetworkDelayms = 5000
          URLPrefix = wsman
          AllowUnencrypted = true
          Auth
              Basic = true
              Digest = true
              Kerberos = true
              Negotiate = true
              Certificate = true
              CredSSP = false
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          TrustedHosts
      Service
          RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
          MaxConcurrentOperations = 4294967295
          MaxConcurrentOperationsPerUser = 1500
          EnumerationTimeoutms = 240000
          MaxConnections = 300
          MaxPacketRetrievalTimeSeconds = 120
          AllowUnencrypted = true
          Auth
              Basic = true
              Kerberos = true
              Negotiate = true
              Certificate = false
              CredSSP = false
              CbtHardeningLevel = Relaxed
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          IPv4Filter = *
          IPv6Filter = *
          EnableCompatibilityHttpListener = false
          EnableCompatibilityHttpsListener = false
          CertificateThumbprint
          AllowRemoteAccess = true
      Winrs
          AllowRemoteShellAccess = true
          IdleTimeout = 7200000
          MaxConcurrentUsers = 10
          MaxShellRunTime = 2147483647
          MaxProcessesPerShell = 25
          MaxMemoryPerShellMB = 1024
          MaxShellsPerUser = 30
  
  

  PS WSMan:\localhost\Client> winrm enumerate winrm/config/listener
  Listener
      Address = *
      Transport = HTTP
      Port = 5985
      Hostname
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  
  Listener
      Address = *
      Transport = HTTPS
      Port = 5986
      Hostname = host-vsphere.urbanvirtu.local
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint = 4f00d909810f619876bf5712a22e0fb21382d628
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  

  If I try to connect from a second server via Kerberos with HTTPS it works:

  PS C:\Users\Administrator> winrm identify -r:https://host-vsphere.urbanvirtu.local:5986 -a:Kerberos -u:administrator -p:password
  IdentifyResponse
      ProtocolVersion = http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
      ProductVendor = Microsoft Corporation
      ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
      SecurityProfiles
          SecurityProfileName = http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/basic, http://schemas.dmtf.org/
  wbem/wsman/1/wsman/secprofile/https/basic, http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos, h
  ttp://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/https/spnego-kerberos
  

  But with the vco I:

  Name: test

  The Host/IP: Home - vsphere.urbanvirtu.local

  Port: 5986

  Type remote PowerShell: WinRM

  Transport protocol: HTTPS

  Authentication: Kerberos

  Session mode: A shared Session

  User name: administrator

  Password: password

  

  

  Someone has had this problem before? What I did wrong?

  Thanks in advance for your help.

  Best regards

  Jean

  Based on the log, I see that "Connection refused:" error was connected to the kdc parameter in the krb5.conf file and you have already defeated it.

  Now, if I understand 'Add a PowerShell host' the workflow remains in working condition and does not end.

  This behavior I observed in the case of PowerShell plugin 1.0.3 is trying to connect to PowerShell host running PowerShell 4.0.

  Would you please provide version of

  the PowerShell vCO plugin version

  PowerShell host - Windows Version

  PowerShell host - PowerShell version

• Add a PowerShell host workflow question

  Hello people,

  I ran into a problem when I tried to run the add a workflow host Powershell.

  Here's what I've done so now...

  Installed PowerShell plugin in the system of the vCO.

  WinRM service that is configured according to the doc in my vCO server... I want to use the same vCO as a powershell host server too...

  I created the krb5.conf file in the installation of vCO location mentioned in the doc.

  Ran the workflow manage SSL certificates which was a success.

  Now I have to add this as a host of powershell to see in the inventory which fails with the error below.

  Connection timed out: connect (name of the dynamic Script Module: addPowerShellHost #16)

  Your help is very appreciated!

  Kind regards

  VMSavvy

  1. I suggest to add "-a: option of the Kerberos test to connect to the winrm service" This will ensure that the mechanisym of Kerberos authentication is used.

  > winrm identity-r:https:// host_name : port_number -was: Kerberos-sup: user_name Pei:password

  2. try to connect vCO PowerShell plugin using shared session and providing user specifiv credentials (but be sure first that this user has enough privileges to connect to the WinRm service using winrm client)

  > winrm identity-r:https:// host_name : port_number -was: Kerberos-sup: user_name Pei:password

  3. could you give the error reported in vCO?

• Get the stock vCO Powershell hosts

  Hello

  Does anyone know how to get Powershell hosts of the vCO stock of the script?

  I would like to run a script on several hosts of Powershell without specifying each (this list of construction and provision of a table would be a good solution).

  Thanks for your help

  var psHosts = Server.findAllForType ("PowerShell:PowerShellHost", null);

• vCenter 6 in a WAN configuration - cannot add 6.0.0 ESXi host, is stuck at 80%

  All,

  I tried a day now to find a solution to this. We have 6 break-in LAN1 vcenter, connect a host ESXi LAN1 and ESXi another I LAN2. LAN1 and LAN2 are connected with IPsec. Resolution of DNS works both ways, as far as I can tell and all ports are open between the hosts. We had everything up and running but due to hardware failure, needed to replace the ESXi I LAN2.

  With the new host in place, I am not able to add to vcenter. I tried to use the name and IP address. I even downgraded to a previous version of ESXi, but all does not work, stuck at 80% progress bar. Then the message "Failed to contact the host specified." Checking the logs I see that vcenter is actually connected to ESXi in LAN2 and creating the account vpxuser to communication works in one way at least.

  I remember I had the problems of implementation of the previous host in LAN2, but all of a sudden it worked simply.

  Someone at - he had no idea where to start looking?

  / Mattias

  Make sure you have the MTU settings assign identical values everywhere.

• Add the plugin of the instrument

  Help!  I can't understand how to add a plugin instrument Mainstage.  I have SampleTank3 and the plugin appears in the appropriate folder.  Plugin Manager show the plugin and 'Use' is checked. Everything I read says to click on the slot 'instrument' but I can't find it either.  Any help would be appreciated.

  B

  In the instrument Channel Strip, click on the right side of the box (on the up/down arrows). The list is displayed. Choose your instrument to THE.

  

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Is it possible to add a plugin to the core module to iptables to VCS?

  Hello

  Is it possible for a third party to add a plugin to the core module to iptables to VCS to protect H.264 video with redundant packets? Can I use the same version of CentOS or Redhat header files?

  Thank you

  Yue Hong Quan-

  https://www.Facebook.com/groups/videoconferencing/
  http://SCOPIA.H323Meeting.com

  His multiple point of view, the part of the technology, the SCV is founded at least not red and I could imagine

  If you have very likely different headers and libs will not work.

  If you find the good ones, don't know if there is any hardening is preventing it from loading in any case.

  Then there's the next part, if what you are trying to archive makes sense and if there would be other ways.

  For GENERAL installation, it would be same negative as the remote endpoint could be confused it you

  Double all RTP packets. If you want to use between two VCS, you could also manage that by

  a box of linux from the start which is just double the packages you need.

  In any case the matching look not so hard, but on the receptor site to the device that

  package is the right one, for example, you want to just take the first or do some

  test of corruption as well.

  Not to mention that I would check what can do your end points, look at clearpath, who is a redundancy

  already in the endpoint RTP stream.

• Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'

  all the details here

  Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'

  Resolved in the thread on the GS.

• This is the message I get when I try to print from my pro 1 when I go to plug in extras, I tried to import and add another plugin, but no success/Library/Caches/Canon/PrintStudioPro/PrintStudioPro_LR_TEMP

  This is the message I get when I try to print from my pro 1 when I go to plug in extras, I tried to import and add another plugin, but no success/Library/Caches/Canon/PrintStudioPro/PrintStudioPro_LR_TEMP

  Hi Nathalie-B,

  Greetings!

  Go to the/Library/Caches/Canon, and remove the inner content.

  Also, be sure to empty the trash after that.

  Then try again.

  Concerning

  Jitendra

• How to add additional plugins in VCAC 6.0?

  Hello

  I want to add SNMP plugin in VCAC 6.0, and I'm not weather of course that we can do this or not?
  So help me if it is possible...

  Thank you!!

  You need to add to vCO in vCAC. vCAC comes with default integrated vCO. To use it, you will need to connect to the vCAC base unit and start the service using

  command start service vco-Configurator

  Once this is done, go to https://vCAC-Appliance-FQDN:8283 and you will arrive at the Orchestrator configuration page where you can install the snmp plufin by going to the page of the plugin.

  Refer to this link

  http://www.vmtocloud.com/how-to-start-VCO-configuration-service-on-Vcac-6-appliance/

• Problem with the plugin ActiveDirectory

  I have a problem with the plugin active directory that it does not show the OUs under a spesific UO (I guess that's because there are too many objects in this spesific UO and for some reason any, limit the amount of objects, it can show).

  To work around the problem I wanted to use the Active Directory script class and use the search method, but I can just find a way to create this object to use the reproductives I guess that I do not understand something in the API.

  Read this it looks like it could be typo...

  Please share your script, or search for mistyped as ActiveDirectory.Search ().

  For example - to throw the object system: TypeError: cannot find the default value for the object

  This code online

  System.Iog ("Test");

  because this isn't a lowercase L, it is a shift that i and this method does'nt exist on the object of the system...

  Other objects throw correcting errors as this method does not exist in the wrapper dyn...

  Depends on the implementation and management inside of it I guess than errors

  Kind regards

  Andreas

• Hello. I have Lightroom 3. The only addition I've ever done is to add a plugin of double Finder several years ago. No, all of a sudden I can no longer download photos as usual. I need to deceive Lightroom by downloading by adding new files into folders an

  Hello. I have Lightroom 3. The only addition I've ever done is to add a plugin of double Finder several years ago. No, all of a sudden I can no longer download photos as usual. I need to deceive Lightroom by downloading by adding new files into folders and then synchronize these folders. But lately this work around is not no longer works. Is the program, forcing me to upgrade? Can I continue to use this version. I need to reset something. Please help because it is very frustrating.
  Thank you!
  Emily

  PDF, GIF and BMP are not the types of files supported for Lightroom.

  See here: help Lightroom | Supported file formats

  However, there is a plugin available that will allow you at least these files from the catalog, it is called Anyfile: any Lightroom Plugin file

  Bruce

• Add-ons/Plugins without recovery?

  Hello

  I would like to know: what is the best way to create an additional, small add-on or plugin package (for use with AppLink) for an existing, large, thinstalled software without needing a recovery complete?

  I wonder if everybody keeps an instant huge tree in their packaging vms in the case where an add-on/additional plugin is required for xy software package to be used through AppLink.

  I don't want to use sbmerge to inject the add-it/plugin, but the AppLink method allows to load (for different reasons). I do not have a snapshot of initial installation, but I its project folder, is there way to "re-inject" this OS vm packaging having the zero point original that matches the thinstalled software (you have warranty on picking up, no matter how 'clean' of the virtual machine is)? I also took a look at sbmerge and thought "Hey, sbmerge has every unique information about the software, the add-it/plugin newly installed and the original project folder - it displays even exactly what has changed, why is there a switch to create a new package out of it?

  Miss me some sort of feature to create separate additional packages for existing devices without needing the snapshot of the virtual machine original capture of the existing software.

  Is there a way to do this?

  Any help on this is appreciated.

  Hello

  What I propose is a sneaky, but work thing:

  Create a new folder and copy the file build.bat and package.ini from your original project. Don't change anything yet.

  Then run the sbmerge against this (empty) project. All the settings will be imported and the folders and files of containers registry will be created.

  Finally able to shape the package.ini on the 'module', so it gets (at least) a new name of the inventory and sandbox (together the isolation mode of the project to "Merged" didn't prevent presenting conflicts isolation mode). I guess you must also update (exe created) entry points. Favorite: just create a .dat referring to a placeholder / 'cmd.exe '.

  (edit :) Also clean up the project and delete all is not aimed to capture files...

  Build it now (cross your fingers you he patched correctly) and put it in your initial application as a plugin (optional).

  TADA, updated functionality in your application: P

  Kind regards

  Michael Baars

• Problem connecting vSphere client to a host ESX or ESXi to

  I have tried with an ESXi host so an ESX host.  I spent the installation on a square between hypervisors, as well as to try on another box.  I have redownloaded the two hypervisors and check that they match checksums, I reinstalled the customer charge downloads of both vSphere host as well as the www.vmware.com/downloads.

  Whenever I try to connect to a host, I get the same error.  First of all, I get:

  Error analysis of the file "clients.xml" Server "192.168.2.195".  Logon will continue, contact your system administrator.

  After clicking on OK, I get this error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception.

  I would appreciate a suggestion or an explanation of what is the question.

  Thank you!

  edited for spelling.

  This is not a problem with the server on the host, there more IE7 problem. Check the 1011329 of Vmware KB

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1011329&sliceId=1&docTypeID=DT_KB_1_1&dialogID=27182245&StateID=1%200%2027180582

  AM,

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

  The latest articles and articles about Virtualization:

  http://communities.VMware.com/blogs/amodi

  http://vsolutions.compare2shop.com