Problem blackBerry Q10 has after the last 10.2 OS update

Similar Questions

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Problems with camera raw after the last update

  Previously, when I dropped a number of CR2 files in photo shop CC. The editor of raw opened with them all together. The last update seems to stop it. They open in individual windows, how do I get their opening in a window?

  Hi peterp,

  Please go into Photoshop preferences< file="" handling="">< file="" compatibility="">< "prefer="" adobe="" camera="" raw="" for="" supported="" raw="" file"="" should="" be="">

  See screenshot below:

  

  If the solution above does not work, you can reset the Photoshop preferences to default.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Images of blackBerry Q10 recovery after the phone was wiped out

  I was on vacation from work and took over 100 pictures of my kids and videos that can never be replaced.  Three days after that I went back to work, somebody had put my Active Sync account for wiping my device.  I've never had a change down photos and videos, is there a way to recover photos after a wipe?  I tried several software and none of them can even see a blackberry, they were designed for other smart phones that I have not found a specific BlackBerry.  I don't mind paying for a solution that works

  Sorry, a wipe of security on the device memory would erase these images and they would be inaccessible.

• After the last set windows to update my computer got caught in a loop, trying to step 3 of 3__ he remains at 0% for a while, then restarts.

  Windows does not run in a reboot loop

  Windows does not run in a reboot loop

  From:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  When you try to install update 937287 from Windows Update on a computer that is running Windows Vista or Windows 7, you may receive the following message: Configuring updates step 3 of 3. 0% complete after you receive this message, the computer restarts, and then you receive the same message again. Windows will not start and the computer continues to restart and display the same message. The update is not installed successfully.

  To resolve this problem, use the following methods in the order in which they are presented. Method 1 is the simplest solution, and method 3 is the most complex.
  * Method 1: Start Windows with the Windows installation media and use the repair feature
  * Method 2: Start the system in safe mode and then use the system restore feature

  Ignore the number KB of the update in the article and start with the method 2 .
  If this does not resolve the reboot loop, then perform the method 1 .
  There is No method 3 listed in the article, and he needs a correction.
  MowGreen MVP Data Center Management - update of safety Consumer Services

• All links that do not open in the same window now open a new window. CTRL + click and Middle click, as well as menu popup 'opens in a new tab' all open link in a new window. It started after the last (9.0.1) update. Thank you!

  The only method I found to open a new tab is to copy the URL, press Ctrl + T, and then paste the URL and go.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also check the preferences of browser.link.open_newwindow on the subject: config page.

  • http://KB.mozillazine.org/browser.link.open_newwindow
  • http://KB.mozillazine.org/browser.link.open_newwindow.restriction

• WiFi connection issue after the last update of Windows

  After that the last Window XP updated, I faced a problem connecting wifi internet.

  I (and others I know) get the question when trying to connect to the wifi. One of my friends has windows 7 and had the same problem. Personally, I have two laptops (Thinkpad T43 and T60), the T43 has only been affected. I did a lot of tests (tests of ipconfig, ping, etc.) and found what could be the problem.

  I found that I was not able to conect to my router. I changed my wifi to no (no wep or wpa key) security configuration. At that time, I was able to connect to the internet. I changed my wireless security to WEP key with special characters again and wasn't able to reach my router connection. However, when I changed my WEP key of only alphanumeric characters that has worked. With the WPA key, I am not able to connect to my wifi.

  My laptop is an old but a friend to me as a new brand.

  I have the feeling that there could be a conflict with some brands of wireless cards. I have an Intel Pro 2200BG in the T43 a different in the T60. In my tests, I used the same configurations as my other laptop which doesn't have any problem. I used the same radio channel and values. I would like to get the thoughts of an expert to properly solve the problem

  Thank you

  Problem fixed

  With 2 other people with the same problem (one called me an hour ago!) after the last window xp SP3 update and glancing again Ipconfig. I found that the tcp/ip seem to have been corrupted by the update. Then, I applied the following command at the command prompt: netsh int ip reset resetlog.txt , and then restart the computer.

  This time, the command ipconfig showed information that makes sense! And three laptops with windows XP pro SP3 were able to successfully connect to any Protocol (wpa, wpa2, wep).

  I conclude this post by saying that, probably one of the last update of security for windows XP corrupted the TCP/IP Protocol and we had to reset correctly to solve the problem.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Shutdown after the last firmware upgrade problems

  After the last firmware update, I have questions turn off my rocket. If I try to turn it off during audio playback, the screen goes all black and turns off, and when turned on, it passes again by updating of media. She does whenever I turn it off if I do not push the button "Play/Pause" first. It's very annoying - anyone else knows this or can help?

  Sansafix said that it will be fixed in the next firmware. So far, just press the Center button until you turn it off!

• After the last update CC visualization and image preview for always (like at dial-up speed placing images in CC apps via site Internet Adobe Stock) - is there a problem?

  After the last update, image display Adobe stock so that it 'charge + connects' Apps take forever (dial-up speed).  Once an image is selected it also takes forever to make it appear in the library of CC in app (i.e. InDesign).  Is there a current glitch.  I already cleaned my cache of the web browser and also used different browsers (Chrome and explore).  Adobe Stock doesn't even work in the error get Chrome and Explorer Adobe Stock pages are broken.

  Have you checked the help Adobe Stock | Adobe Stock learn & support

  Concerning

  Stéphane

• You Tube is not playing video on Firefox with Adobe Flash after the last update

  You Tube and other sites do not play video on Firefox with Adobe Flash after the last update for both. Adobe Flash works on other sites but not You tube and sites that can have embedded videos from You Tube, I'm not sure.

  Adobe Flash not crushed and no error message is visible. All that shows is a black screen for Flash video. Make a right click of the screen shows only a non-interactive 'a film has not loaded' and the clickable link to the home page of Adobe.

  I spent an hour trying things as suggested for past problems similar to this, but none helped.

  I sent sad face, letting you know what I think of the last update for this reason which explains pretty much the same thing, as I have said here.

  I have no other info but if I had a form any entry and queries you I might be able to provide more.

      I think the Flash 12.xx is a phantom. I can't find it on my comp. Only 13.xx shows anywhere but on the Pugins page in Firefox.
  
  

  Weird. I have no idea why it does that. Your list of details of the system shows that 13.0.r0 Flash.

     About the .Js I cannot find a User.JS in the profile folder but ther is a user.bk and other files that have.json. Should I do anything with these? 
  
  

  If you don't, that's okay. Leave all of the files.

  Does disabling HA in Flash and Firefox work better for you now or even not playing it?
  
  Make sure your firewall is not something Firefox blocks.
  
  This happens in other browsers as well?

  The site appears your version of Flash player and your operating system?

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Here is what mine looks like
  
  

• After the last update wmp plugin is missing in Add-ons, but is still correct installed. Reinstall will not work. What can I do?

  I been lissening to online radio. Necessary to update Firefox. After the last update the windows media player plugin has disappeared from the list of Add-ons, while always being correct installation. I reinstalled it, but that has not worked. I have replaced/deleted some files in firefox as suggested, for similar problems, but that no longer works.
  Now, I can not play wmp files on firefox.

  Hope you can help me solve this problem.

  Found a solution:

  Go in Subject: config and change plugins.load_appdir_plugins from false to true. Apparently FF21 assigns the value false by default causing it to not detect plug-ins installed in this way.

• How to activate IPAD 2 after the last update.

  I was not able to activate iPad 2 after the last update.   I tried to restore from Itunes and still get the same message. "the activation server is temporarily unavailable.   Connection, try your ipad to iTunes to activate it. or try again in a few minutes.

  Has anyone found a solution?    I restored via Itunes and everything done is lose my serial number. That appears is no longer...

  Support told me to send my ipad to them for a quote on the cost to repair?    It is obviously a software issue since there are so many people here have the same problem

  any suggestions?

  This problem is at the end of Apple. Wait until they fix.

  (140876)