Problem building JDE 4.6.0 project with 4.1.0

Similar Questions

• How to build the project with library error in adf adf

  Hello

  IM using jdev 11.1.2.3

  in my project I module 2 so we need to build the project with adf dependency libraries...

  Two copies of the way to build the project with trial and error in adf adf

  Timo

• Client server of executable activex LabVIEW project with excel vba

  Hi all

  I submitted a ticket to support nor on this problem, but my deadline for this project is very close, so I would like to ask the community to see if someone has encountered this problem before (I hope it's ok that I'm doing this!). I did a fair amount of forum-scouring, and I didn't know this even discussed problem.

  I built a labView project which is essentially in the material data and
  preforms various visualizations and transformations on the data. A bit of the
  Screws in this project are available by VBA Excel as a Server ActiveX with LabView and
  Excel as the customer - and it works! I recently discovered I would need to do a
  executable version of my project, so I'm now trying to figure out how to do the same thing
  with my executable file as the server instead of LabView. Here's a simplified version are
  My VBA code:

  Void Button1_Click()
  Dim lvapp As MyServer.Application
  Dim vi MyServer.VirtualInstrument

  Set lvapp = CreateObject ("MyServer.Application")
      
  VI the value is lvapp. GetVIReference ("Main.vi", "", True)
      
  Sheet1.cells (1, 1) = vi. GetControlValue ("Path")
      
  lvapp. Quit smoking
  End Sub

  I replaced LabView here with the name of my server. The code
  failure of the CreateObject method with the following error:

  Run-time error '13':
  Type mismatch

  Things, I'm pretty sure I'm doing it correctly:
  -L'application is configured as an ActiveX server in the build options
  -J' ran the VI once and close/re-open it just after each build before trying the
  worksheet
  -In excel, VBA method is configured to reference the type library of the server.
  -J' have LabView itself closed when I run the .exe

  Thank you

  Alex

  My versions and such:
  Software of NEITHER: LabVIEW version 2012
  OS: Windows 7

  It's interesting - I'll have to look into the issue. In the meantime, I found a solution.

  It's quite mysterious, but it seems that all I had to do was make sure you only the type library of the server executable has been referenced in VBA (no LabView or OLE type library) and declare the variable app as object, rather than MyServerName.Application. Honestly, I have no idea why this works, but it does. Also, I learned that you need to use the executable file paths, which are a little different than the paths of project files.

  Thank you

  Alex

• Cannot print mode quick project with DraftSight CAD software.

  Hello

  DraftSight is a professional 2D CAD free software available at http://www.3ds.com/products/draftsight/download-draftsight/.  I can't print quick mode of project with DraftSight but can using AutoCAD.  I cannot understand this and would appreciate any help.  Is it a question of DraftSight or HP problem?

  Thank you in advance.

  Model and type of printer: HP DESKJET 5440
  Installed printer driver version: 6.1.7600.16385
  DraftSight version installed: V1R3 x 64

  In general, if only a single program has the problem, it is caused by a conflict between the program and the driver.  Generally it is the manufacturer of the program to resolve the conflict.  You can let them know that it stops, in case they don't already know.  There is workaround that you can try in the meantime.  It is not guaranteed to work, but I had a lot of success with it.  Give it a shot and let me know what happens.  The link below will lead you in the instructions.

  How to assign other print in different Versions of Windows drivers.

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• Problem of event reminder of the registry with Linkam ActiveX controls

  Hello

  I have a problem in configuration reference VI to interface with Linkam ActiveX control with an event callback function to register. I created a VI strictly typed with re-entrant execution, with all the correct connectors, as shown in the picture below, but LabView complains of a broken wire. The only difference between the input and the output seems to be that the result stands as an asynchronous function, and the entrance wants (synchronous) normal function? I can't find any option to make my VI reference become synchronous. Does anyone have any suggestions as to what to try next? Thank you very much

  Davide

  

  Hello

  Make a right-click on the terminal 'Ref VI' choose 'create the callback VI '.

  Do not try to build it yourself, it never works. :-)

• A way to save a project with bad settings?

  I use first 14 elements on Windows 10. I got 9 hours in a project when I started having a lot of curious small bugs. My chronology rendered button would do nothing when you click the pan tool and zoom missing overlays of timing and more annoyingly, changes to the effect of movement could not be deleted properly. He would show up on the preview window, but rub he showed the old settings, and this is how she would export.

  That's when I noticed that my project settings has been 1080i30 instead of 3840x2160p/30. The possibility to change all this is greed out, and I spent all day on this video. Is there anyway to change the project settings and maintain my changes? The bugs I see are inactive to have the wrong project settings? If this is not the case, what are the problems can it cause? My video will always correctly export in 4K?

  Thank you guys.

  An option that can help save time is to create a new project with the correct settings and then use ClipMate to copy your edited video of timeline from one project to the other.

  Technically, you can't copy video to one Premiere Elements project to another. But many have been able to do this using ClipMate.

• Build the DNG SDK on Mac with XCode 6.2

  Hi all

  I am trying to build the DNG_SDK Version 1.4 with XCode 6.2. I downloaded all the third party for the xmp and dng sdk libraries. After connecting with the current xmp sdk 201412 errors, I tried to compile DNG_SDK with XMP SDK Version CS6. The subproject XMP is in my DNG_SDK and is built successfully.

  For the DNG SDK, I always get errors from the linker and I have no idea why (without worrying which architecture I select i386 or x 64):

  LD/Users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/targets/mac/release/dng_validate normal i386

  CD/Users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/projects/mac

  export MACOSX_DEPLOYMENT_TARGET appears = 10.9

  /Applications/XCode.app/Contents/developer/toolchains/XcodeDefault.xctoolchain/usr/bin/CL ang ++ - arch i386 - isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOS X10.9.sdk-L/users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/objectives/mac/release - F/users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/objectives/mac/release - list of files/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy udz/Build/Intermediates/dng_validate.build/Default/dng_validate\ release.build/Objects-normal/i386/dng_validate. LinkFileList - mmacosx-version-min = 10.9/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy udz/Build/Products/libXMPFilesStatic.a/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy carbon udz/Build/Products/libXMPCoreStatic.a-cadre-Xlinker dependency_info - Xlinker/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy udz/Build/Intermediates/dng_validate.build/Default/dng_validate\ release.build/Objects-normal/i386/dng_validate_dependency_info.dat o/Users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/targets/mac/release/dng_validate

  Undefined symbols for the i386 architecture:

  "< Std::string > TXMPMeta: Initialize() ', referenced from:

  XMPFiles::Initialize (unsigned int, const char *, const char *) in libXMPFilesStatic.a (XMPFiles.o)

  "TXMPMeta < std::string >: SetProperty (const char *, const char *, const std::string &, unsigned int) ', referenced from:

  P2_MetaHandler::SetAudioInfoFromLegacyXML (bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetVideoFrameInfoFromLegacyXML (XML_Node *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  MP3_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MP3_Handler.o)

  ReadIDXFile (const std::string &, const std::string &, TXMPMeta < std::string > *, bool &, MD5_CTX *, bool) in libXMPFilesStatic.a (SonyHDV_Handler.o)

  XDCAMEX_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (XDCAMEX_Handler.o)

  XDCAM_Support::GetLegacyMetadata (TXMPMeta < std::string > *, XML_Node *, const char *, bool, std::string &) in libXMPFilesStatic.a (XDCAM_Support.o)

  RIFF::importProperties(RIFF_MetaHandler*) in libXMPFilesStatic.a (RIFF_Support.o)

  ...

  "TXMPMeta < std::string >: SetProperty (const char *, const char *, const char *, unsigned int) ', referenced from:

  ID3_Support::ID3v1Tag:read(XMP_IO*,_TXMPMeta<Std::String>*) in libXMPFilesStatic.a (ID3_Support.o)

  P2_MetaHandler::SetXMPPropertyFromLegacyXML (bool, XML_Node *, char const *, char const *, char const *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetGPSPropertyFromLegacyXML (XML_Node *, bool, const char *, const char *) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetAltitudeFromLegacyXML (XML_Node *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  MP3_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MP3_Handler.o)

  MPEG4_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MPEG4_Handler.o)

  ReadIDXFile (const std::string &, const std::string &, TXMPMeta < std::string > *, bool &, MD5_CTX *, bool) in libXMPFilesStatic.a (SonyHDV_Handler.o)

  ...

  "TXMPMeta < std::string >: DeleteProperty (const char *, const char *) ', referenced from:

  P2_MetaHandler::SetRelationsFromLegacyXML (bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetDurationFromLegacyXML (bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetGPSPropertyFromLegacyXML (XML_Node *, bool, const char *, const char *) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetAltitudeFromLegacyXML (XML_Node *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (P2_Handler.o)

  JPEG_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (JPEG_Handler.o)

  MPEG4_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MPEG4_Handler.o)

  ...

  Any hint is appreciated. Thank you

  I found a trick here (Xcode Compile Error Undefined symbols for architecture x86_64: "TXMPMeta < std::string >: Initialize () which lacks an include statement, but which is defined in the sdk dng (dng_xmp_sdk.cpp):")

  #if qMacOS

  #ifndef MAC_ENV

  #define MAC_ENV 1

  #endif

  #endif

  #if qWinOS

  #ifndef WIN_ENV

  #define WIN_ENV 1

  #endif

  #endif

  #include < new >

  #include < String >

  #define std::string TXMP_STRING_TYPE

  #define XMP_INCLUDE_XMPFILES qDNGXMPFiles

  #define XMP_StaticBuild 1

  #include "XMP.incl_cpp".

  This cannot be the reason...

  Hi I came across similar issues. Try changing the X operating system deployment target "OS X 10.8" in the deployment section parameters build for the dng_validate project.

• ActionScript Mobile project with command line

  Hey guys, trying to figure out how to compile a project originally created in Flash Builder 4.7 as ActionScript Mobile project with the command line. I found mxmlc and that seems to be exactly what I need, but it seems that take a .mxml file and with this type of project, no .mxml was generated by Flash Builder.

  Am I supposed to just create it manually? I hope there is an easier way because the long-term goal is to continue to work with Flash Builder for development and then use the command line to actually deploy the final product and I don't want to have to manage a .mxml file.

  Any suggestions? I need the instructions for Windows - thank you!

  The solution was to use the - dump-config inside Flash Builder parameter and then use it to pass as an argument to mxmlc with the - load-config parameter. Thank you guys

• Problem of the aggregator? First project shows no more

  I use 6 Captivate.  I loaded two projects with the aggregator to http://www.writingforresults.net/workshoponline/test_05.htm.  The display begins with the second project, and can't get the first project display.

  I tried to launch the group project again in Google Chrome (before I was using IE).  The first time I did it, it worked fine.  The second time, however, it started with the second project, and I could not return to the first project.

  If anyone can offer a glimpse into what I did wrong, I would be very grateful.

  Kind regards

  Rob Parkinson

  Just checking.

  You uncheck the option "navigate to view slides only" in the files in your project? You must re - publish all your modules separately and build your aggregator from scratch.

• How can I share a GarageBand project with someone else?

  I use the latest version (2.1) of GarageBand for the iPad and I wish I could share my projects with other members of my group, preferably without having to use a PC/Mac, as a kind of audio sketchbook for song ideas.  I would like the guitarist to record a guitar on a drum track and then share it with the singer to record the lyrics and bassist to record a bass line (which use GarageBand for iPad) and then move it for refining.  So far, I have found 2 options, neither of which made the task:

  • I share the song via Dropbox (or Google Drive), but this "flattens" the project and saves it to an audio file that does not contain the tracks of individual instruments.
  • I can export to iCloud as a project .band file (i.e. the individual instrument tracks) but it cannot share with others like iCloud allows no sharing! *

  * I could use a Mac or a PC to copy the file iCloud .band to Dropbox/Google Drive to share, and then other users should copy their iCloud drive (using a Mac or a PC) and import it in GarageBand on their iPad.  But there must be a way more simple that does not involve the use of a computer?

  Any ideas?

  Thank you

  Dave

  http://www.goodquestionderek.co.UK

  * I could use a Mac or a PC to copy the file iCloud .band to Dropbox/Google Drive to share, and then other users should copy their iCloud drive (using a Mac or a PC) and import it in GarageBand on their iPad.  But there must be a way more simple that does not involve the use of a computer?

  No, there is not. Without the detour to a computer you cannot interchange GarageBand projects between iPads, unless you were using all the same AppleID and iCloud.

  You can only send audio files back, so one of you will have to collect separate tracks and mix them.

• I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator, I can't find the project. How can I do?

  I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator during its use, I can't find the project. How can I do? I made in IMOVIE I force see where and how I can save the project

  I have an IMAC

  Hey fradel,.

  Looks like you need to export your movie, so you can burn it to a DVD using the DVD Creator Application.  Back on how to do it.

  Now I'm not sure what version of iMovie you use, but take a look at the links below for the steps to export the videos to your computer. Then you should be able to see those newly created files on your DVD Creator application.

  This first link is for the latest version of iMovie and the following link is for the previous. If you have a different version of let me know.

  iMovie (2013): export a QuickTime file
  https://support.Apple.com/kb/PH14734

  iMovie 11: export your videos in a folder from the Finder
  https://support.Apple.com/kb/PH2285

  Take care

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• Cannot save the project with film about WMM 2.6

  Hi im trying to save my movie in Windows Movie Maker 2.6, but it does not let me save all I need a way to record as soon as possible...

  Please give me answers that will help me as soon as possible!

  How many photos? If it's a big project with many effects and
  transitions, it may be too complex for your system resources.

  Are the photos all JPEG (.jpg)?

  Convert pictures in Windows Bitmap (.bmp) image may be worth a try.

  And... before trying to save... it may be worth trying to go to...
  Tools / Options / compatibility... tab and uncheck the box 'all' filters / OK.

• Replace the charger in the project with sequence Panel

  Hello! I would like to ask a question on the simplification of workflow that is walk around in my mind for years:

  Is it possible to replace an element in the project with a sequence Panel?

  The reason why: I have a music-video with LOTS of cuts between relatively little overall clips. For the adjustment of the colors in the first (or otherwise), I like to keep as much space for easy modifications as possible until rendering and so create a sequence for each clip where I apply these effects at once. In this way, I don't have to go through each occurrence of the sequence in my calendar to change the rating. While this works well if you have done the part of each movie clip before the cut, I have no idea how to achieve this easily once you already have your project cut with clips instead of clip-sequences.

  Is there another way for the effects "on the scale of the clip" that I'm missing? Thanks in advance for the advice and help.
  Best regards!

  If I understand your workflow?

  Can have a look at the ranking of the main element.

  Apply effects Master Clip in Premiere Pro

  For it is possible to replace an element in the project with a sequence Panel? NO.