Problem by disabling the software screen

Similar Questions

• Disable the software updates

  How can I disable software updates for my devices.  After the fiasco of the last with 9.3, I refuse to update to the most.  I was on the phone with Apple customer for 2 hours after 9.3 locked my phone and Apple had no idea to solve the problem.  It was entirely due to verification of 2 point added for security.  He was so sure that I can't use my own phone.  Apparently, I canceled the audit of 2 article, which in turn wiped all my devices - Mac, iPhone, iPad iCloud data.  Now that's security.

  APPARENTLY, cancel checking the 2 story did not work either!  I had to use it to get the boards, and I need to have 2 devices that I can get the code.  The apple code sends disappears when you return to the screen to enter.

  < published by host >

  If I remember correctly (and it was some time ago), to 'disable the software updates' simply tap "not now" or "Remind Me later" (or other) option when the update dialog box software iOS appears.  After doing this 3 or 4 times, you should stop doing the guests.  Then delete the update of iOS in the list:

  Settings > general > storage & use iCloud > manage storage (in STOCK)

  If you wish.  I'm not saying that I recommend doing that, just answer the question.  I think a more prudish approach is to wait a week or two and see (from this forum, for example) If users have problems with a particular software update.  Then make the decision on that basis.

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• Help! Disable the touch screen on Envy Touchsmart Ultrabook 4

  Hi, I have a problem, try to disable the touch screen of the Envy Touchsmart Ultrabook 4 function in Windows 8... I was looking for an answer on how to do it, but I did not find anything. I tried the method of the control panel > hardware and sound > pen and touch and then disable the option "use your finger as input device", but this option is not there for me! If anyone knows how to do this, I would be very grateful.

  Hello

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• Re Bios Update issues: how to disable the touch screen on the x 360 Pavilion

  I applied the recommended bios update yesterday and now the touchscreen active almost continuously when I do not use it.   which makes it pretty useless mouse too.   I know that HP will release a bios that resolves this problem later, but in the meantime how do I disable the touch screen?

  Thank you google for helping me solve my problem

  http://Lifehacker.com/disable-your-laptop-s-touch-screen-in-Windows-8-1-1588333600

  now can someone let me know once an another bios update solves the problems of touchscreen presented the last of them?

• I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen

  I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen randomly with the screen turned on (I mean everything is black and I can't see a thing, but can still see the light of the LCD screen). This often happens when I open/close a window, browsers web example, the records, or even during the boot. I want to know how to solve this problem and if the upgrade to Windows 10 works for her.

  Hi Haolin,

  Thanks for posting your query in Microsoft Community.

  I do not understand that the screen goes black randomly, and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time it worked?

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Step 1: Reinstall your video driver

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click file, and then click new task (run).

  4. In the text box open, type explorer.exe, and then click OK.

  5. Click on the Start button , go into the Device Manager in the start search box, and then, in the search results, click on the peripheral Manager.

  6. Double-click on display the cards, right click the display device, click Update driver software, and then follow the steps in the wizard that appears. You can also visit the website of the manufacturer of the computer support and install the latest available graphics cards for the same model of computer you have.

  Note: After the driver is re-installed, you may need to restart your computer to complete the installation. You may also need to adjust the resolution of the display to its previous value. For more information, see change your screen resolution.

  Step 2: Search for registry problems

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click fileand then click new task (run)

     In the text box open, type explorer.exe, and then click OK.

  4. Click on the Start button , type regedit in the search box, and then, in the search results, click on regedit.exe.

  5. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  6. Click to select the WinLogon key and then in the right pane, click on Shell. The value of shell in the data column must be explorer.exe. If the value of Shell is not explorer.exe, double-click Shell, and then, in the value data text box, type explorer.exe, and then click OK.

  7. Close the registry editor and restart your PC.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  If this procedure resolves the issue, you are finished. If this is not the case, proceed to the next set of steps.

  Step 3: Start the computer in safe mode and run system restore

  1. Click on the Start button , click the arrow next to Shut Down, and then click restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. In the Advanced Boot Options screen, use the arrow keys to select Safe Mode, and then press enter.

  4. Log your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  5. Click on the Start button , type "System Restore" in the search box, click System Restore, and then click Next. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. Choose a restore point when your PC worked as expected, click Next, and then click Finish.

  7. Restart your computer normally.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  If these steps resolve the issue, you are finished. If not, try to repeat the steps and chooses an older restore point (if available). If that does not resolve the problem, contact your computer manufacturer or the technical support for further assistance.

• Disable the touch screen for a laptop Windows 8?

  I have a Dell XPS L702x infamous Ghost by clicking on issues where the touch screen randomly 'clicks' on arbitrary areas of the screen (mine seems to be in the lower right corner, often minimize all my open windows or opening calendar) and through the upgrade to Windows 8, it seems a former N-Trig driver who disappeared I would disable the touch screen. Now, I have no way to disable the touch screen, and while Google suggested release "Use your finger as input device" under the pen and touch, I don't even have this available to UN-click box on!

  So: How can I disable the touch screen on my laptop or y at - it a program that can do for me? I am indifferent in fact using the touchscreen - I'm more concerned with the ability to functionally use my laptop without sporadic clicks on my screen.
  Thank you.

  I had the same problem with XPS 17 my wife.    I needed to restore basic functionality so that disabling the touch screen was acceptable.     However, unlike samie (but like you) I didn't "Use your finger as input" option in the control panel.

  I tried to disable the device N-Trig driver in Device Manager, but the pilot did not appear to have be properly installed (after the upgrade from win7)

  I went on the N-Trig (http://www.n-trig.com/Content.aspx?Page=Downloads_Drivers) driver download site and download the new drivers for windows 8 (I have the feeling that they weren't here last week).

  I then when options "Device Manager" on the "Hardware and Sound" page of the control panel.

  In the Device Manager screen, I saw a node N-trig DuoSense digitizers with several below subnode (before dev driver install it there was only one).

  I right mouse button on the element at the top, with a name that ends by "between the roots" and select "disable."

  This touch screen successfully disabled.

  Pity to lose the touch screen, but my wife does not use it and I was in danger of my life, as it was.

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• Impossible to disable the Welcome screen in Acrobat 2015 or DC

  Hello

  I downloaded Acrobat DC, extract the MSI file and used the wizard of customization to delete the shortcut on the desktop, disable updates and accept the EULA.  I have configured the group policy to set the following registry keys (among others):

  HKLM\Software\Policies\Adobe\Acrobat Reader\DC\FeatureLockDown\cWelcomeScreen

  bShowWelcomeScreen

  REG_DWORD

  0

  as shown: light http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/AVGeneral.html?zoom_high = welcome #idkeyname_1_4934light http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/AVGeneral.html?zoom_high = welcome #idkeyname_1_4934

  and the following Welcome screen keeps appearing:

  

  I have also downloaded Acrobat 2015 and used the same process, but used the registry:

  HKLM\Software\Policies\Adobe\Acrobat Reader\2015\FeatureLockDown\cWelcomeScreen

  bShowWelcomeScreen

  REG_DWORD

  0

  and it still seems.

  is there a way to disable the Welcome screen that is displayed?

  Hello

  If you want to disable the dialog box above, you can set the following key, by means of group policy or the Publisher directly in the Customization Wizard:

  HKLM\Software\Policies\Adobe\Acrobat Reader\2015\FeatureLockDown\

  bUsageMeasurement

  REG_DWORD

  0

  Thank you

  Vinod

• If I use VMWare Migration Assistant to move my PC to my Mac, it will make the useless PC (disable the software, delete files, etc.) or it just creates new usable by my Mac molten files?

  I have a PC with Windows 7, my brother uses, but I would like to use Windows 7 on my Mac. I'm afraid that this program can make the PC unusable by disabling the software or deleting important files. This will happen or it just creates new files that can read my Mac? In addition, the new files will require me to register the software (Windows 7, Microsoft Office, etc.), or he'll accept it?

  Thank you

  Dan

  You can P2V Ubuntu as much as you want and it leaves intact with the exception of any software source P2V you install, which is why with most of the Linux distributions I choose to use Clonezilla Live by creating first and empty VM with a VHD in the same size that the disk source hard and then start the physical Machine and the VM with Clonezilla Live and the disk image source hard to target hard drive via the local network.  Once image of the Virtual Machine will generally start without any problem and you now have a clone of work.  If you can not networked together, you can create an image on a USB key and restore the target of the Virtual Machine from the USB, for example.

  To the extent where Windows 7, you will have problems of WPA that can reach the source as well as to run WPA on either and once WGA is running on both.  Nothing gets deleted however I read messages when some users have ended up losing access to the Source and the machine virtual without having to purchase additional licenses.  So which overturned a legal issues however doing a P2V with Windows 7 could be problematic.

  Bottom line is that you must observe the EULA for the product!

• iOS 10 disable the lock screen camera

  Is it possible to disable the lock screen camera? the people cannot take hundreds of pictures without you knowing? I know that you can disable the camera completely in the restrictions under settings, but surely there is an option to turn off?

  Come on apple. the phone the most expensive on the market should see some support and quality service...

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.

• How to disable the touch screen of the Toshiba LX830 - 11 d

  Hello

  I managed to break the touch screen on a Toshiba LX830 - 11 d.

  The machine runs Win8 and always works with a USB keyboard and a mouse, although he thinks there are plenty of touch of the finger around the damaged area.

  Is it possible to disable the touch screen feature so that I can use it as a 'normal' PC or remove the screen touch himself leaving a simple LCD screen?

  Thanks for any advice.
  Dennis

  You see the touch screen in Device Manager? Maybe you can turn it off in there.

• HP Envy disable the touch screen

  I need help, disabling the touch screen on my HP Envy. I tried to get him here, but I found nothing. I'm not really sure how much more explicit I can get about what type it is. If you have any advice on how to understand this, that might be useful. Thank you.

  For Windows 8 and 8.1 with a newer laptop, open Device Manager. The same procedure is likely to be quite similar for Windows 7.

  

  Right click on the tactile HID-Compliant device and select properties to call the Properties window.

  

• Disable the touch screen

  I have a HP ENVY x 360-m6-w105dx and would like to know if there is anyway to temporarily disable the touch screen?

  Hello.

  I did it via Device Manager in Windows.

  Look under "Human Interface Devices".  There should be a line for HID-compliant touch screen (or something similar).

  Double click on that and then click on "disable the device.

  You can make it work again by clicking on "Activate the device" in the same place.

  Good luck!