Problem creating entries, exits and text in the block of Script Scilab

Similar Questions

• How can we separate "Icons and text" of the browser control buttons (back, forward, etc.) since the icons on the toolbar of the add-on?

  With us, it is not a problem. I don't know why it's different here at work - even editing, same settings (as far as I know).
  Windows Vista
  Firefox 7.0.1
  Status 4 Evar installed to activate the add-on bar in a status bar

  I have a NoScript module icon in the corner, which works very well. If I add a GreaseMonkey icon in the menu customize, "Icon and the text" is displayed for this icon as the icon and text browser controls (home, stop, etc.). Other icons the module show icon and the text (S4E, for example). NoScript is the only one I've found so far that collapses down to just an icon.

  I like this leads to the bar having a higher status (add-on). Basically what I want is for only the icon is displayed in the State (toolbar Add on), while keeping icons and text in the browser controls. My current solution is simply to remove the other icons of the add-on - it from the status bar (add-on), but which removes the ease of turning on/off and setting options.

  Please tell me if I can provide you with another thing and thanks for your help.

  Edit: I have some screenshots to show what I mean.
  desired behavior
  problem when the icon is added

  I tried, and while it does not remove the text, buttons retain their width, collapses don't not down icons. I was able to get exactly the effect I want to by changing the setting in the DOM, as stated in my post above, but which only lasted as long as the session and returned to the way it was before, when I restarted Firefox.

  After a few tries, I finally joined the userChrome following tweaks. This tweak sets the buttons didn't use any text, be limited to 20 pixels of width, and, if a drop-down list arrow is present, to hide that. Greasemonkey uses a drop-down list item separated so it must be hidden specifically.

  #addon-bar .toolbarbutton-text { display:none !important; }
  /*The following work for most of my icons except Greasemonkey*/
  #addon-bar .toolbarbutton-menu-dropmarker { display: none !important; }
  #addon-bar .toolbarbutton-1 { min-width:20px !important; }
  /*The following are specific to greasemonkey*/
  #addon-bar .toolbarbutton-menubutton-button { min-width:20px !important; }
  #greasemonkey-tbb > dropmarker {  display: none !important; }
  

• Problem to extract Rad_error_nocontent and CellLAC in the "BOLD" device - 9000

  Hello

  I am facing problem to extract Rad_error_nocontent and LAC through the BB Bold 9000. any program work fine with BB curve.

  Service Provider ATnT

  When I run the application in the BB Bold, he always returns to LAKE and Rad_error_nocontent = 0, is there a setting to BB "BOLD" that have to configure to pick up the Rad_error_nocontent and the LAKE?

  Paste the code for better understanding...

  CellInfo.java

  /***********************************************************************************************************************

  class CellInfo extends form {}
  private int Rad_error_nocontent;
  private int cellLAC;
  private motor eng;
  CellInfo (engine eng) {}
  This.ENG = eng;
  LabelField title = new LabelField ("CellTower", LabelField.ELLIPSIS |) LabelField.USE_ALL_WIDTH);
  setTitle (title);
  HorizontalFieldManager hfm1 = new HorizontalFieldManager (Field.FIELD_HCENTER);
  ButtonField photoButton = new ButtonField ("RAD_ERROR_NOCONTENT");
  photoButton.setChangeListener (new Showid());
  hfm1. Add (photoButton);
  Add (hfm1);
         
  }
       
  private class Showid implements FieldChangeListener
  {
  /**
  * Back to main camera screen.
  */
  ' Public Sub fieldChanged (field field, int context)
  {
  locateCellInfo();
  eng.showDialog ("Rad_error_nocontent" + Rad_error_nocontent + "cellLAC:" + cellLAC);
  }
  }
     
  public void locateCellInfo() {}
  {Switch (RadioInfo.getNetworkType ())}
  case RadioInfo.NETWORK_GPRS:
  Rad_error_nocontent = GPRSInfo.getCellInfo () .getCellId (); /*************Returning 0**************************/
  cellLAC = GPRSInfo.getCellInfo () .getLAC (); / * fetch 0 * /.
  break;
  case RadioInfo.NETWORK_CDMA:
  Rad_error_nocontent = CDMAInfo.getCellInfo () .getBID ();
  cellLAC = CDMAInfo.getCellInfo () .getNID ();
  break;
  by default:
  Rad_error_nocontent = 0;
  cellLAC = 0;
  }
  }
  }

  This code works fine with BB curve but fails with BB Bold

  Please help me to solve the problem...

  The problem may be that your case statement does not take into account NETWORK_UMTS (3g) to move you to your default.

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• When opening 2014 CC PS I get the message "the program cannot strt because ONCoreFoundation8.dll is missing on your computer. Try reinstalling the program to fix this problem.  I did and still get the same message.

  When opening 2014 CC PS I get message "the program can't start because ONCoreFoundation8.dll is missing on your computer. Try reinstalling the program to fix this problem.  I did and still get the same message.

  I have no errors during the installation process.   I have now gone PS cc, copied all the files with ONCore - and paste in the location of the same file in 2014 CC PS.  There is now no error report when I run CC2014 PS and everything seems to work properly.

  I'm still not sure why Adobe has PSCC2014 rather than an update on PS CC.

• I was watching Hulu (TV and movies) and accidentally pressed the "block", ABP (AdBlock Plus) block now all programming to Hulu. What should I do to get Hulu

  I was watching Hulu site and accidentally hit the "block" tab located at the top right of the window open for Hulu. I am now unable to get access to the programming of Hulu. I'm assuming that ABP (whitelisted) blocks now all programming to Hulu. How can I correct this problem and put the Hulu programming on my computer. I use a MacBook Pro, 10.9.3.

  You should find Hulu in Ad blocking rules or rules hidden element list.

  Can you post a screenshot?

• How to add text on the block diagram

  How can you add plain text to the block diagram for the documentation and if I can change the background color to yelllow or something else that can be useful? See the image below

  

  Just a double click in an empty area and start typing. Use color to color the background of the text.

  (there is also a 'free label' in the range of decorations, but that seems to be a detour )

• My iPhone 6plus calls and texts on the subject of own

  Hello

  Can someone help please, I m in trouble with my iPhone 6 Plus. He continues to call people in my contact list, he types txt, s without me touching the keyboard. Really weird? Thanks for your help

  Hi Susyreed,

  Thank you for using communities Support from Apple. It seems that your iPhone does more 6 calls and texts to your contact list without you engage them. I use my iPhone all the time and I'd be worried as well. I'll be happy to help you with this. The first thing I would recommend is for you to create a backup of the iPhone.

  The backup of your iPhone, iPad and iPod touch

  Import photos and videos from your iPhone, iPad or iPod touch

  After you verify that you have a current upward, then restart the iPhone and see if that solves your problem.

  Restart your iPhone, iPad or iPod touch

  If you are still having the problem with the call unexpected or texts, pleaseuse iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings and set up as a new device. Once set up as new, test again to see if the problem is resolved. Then restore from backup.

  Restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• integrate image and text in the report

  I'm doing a label with a logo at the top left, a chart on the side right (an arrow indicating the direction of flow)

  and the text in the body of the tag, so far without success. I tried to use the generation of report vi s to achieve this, but it seems that just the 'standard' reporting rather than on a word one (no Office product on the computer, has no... Works, yech!) limited considerably, although I do not know how the do with the ability of Word template, although I suspect that would make life much easier. I really don't understand what can do the "standard" report When I set the alignment of the Image to add to the report, there is no effect on the placement of my graphics. In addition, it is an addition, which means that I find myself with the image on a label, the text on the other. I want to do is have them both on the same label, the Logo above and the arrow to the right of the text.

  I tried a lot of things, including using the generation of reports "Append façade image" and make a cluster that has been written to fill all of the panel before visible, but it was printed distorted and small, similarly Append control image.

  The printer is a usb Zebra TLP3842

  LV_Pro,

  As FAS so I understand it, the alignment entries apply only to HTML format, so they do not affect the Standard reports.

  Try to put your logo in the header of the standard report.  Then on your front, create a tab control, where you place your text box and graph of arrow in the direction you want to print on the page.  Make the background of the transparent tab control and add the image of the tab control to the report.  I think that it will be justified to the left little matter what you prefer, so play with the size and spacing of everything until it comes out looking how you want.

• How to customize a column to display an icon and text in the com.vmware.ui.lists.ColumnContainer?

  Hello

  I have a ColumnContainer that looks like the following (from the example of chassis)

  < com.vmware.ui.lists.ColumnContainer >

  < uid > < / uid >

  < dataInfo >

  < com.vmware.ui.lists.ColumnDataSourceInfo >

  <!-table of the properties of the subject of this column, usually one->

  < requestedProperties >

  < string > name < / String >

  < / requestedProperties >

  <!--use sortProperty to allow the column to sort on header click-->

  < Proprietetri > name < / sortProperty >

  <! - exportProperty of use to export data from column - >

  < exportProperty > name < / exportProperty >

  < /com.vmware.ui.lists.ColumnDataSourceInfo >

  < / dataInfo >

  < item >

  < mx.controls.advancedDataGridClasses.AdvancedDataGridColumn >

  < headerText > #{name} < / headerText >

  <!--dataField must match a property requested, its text value will be inserted-->

  < dataField > name < / dataField >

  < /mx.controls.advancedDataGridClasses.AdvancedDataGridColumn >

  < / component >

  < /com.vmware.ui.lists.ColumnContainer >

  The cell needs display an icon and text side by side. How to make an image in the cell? Outside the environment of plugin, I was able to successfully create an AdvancedDataGrid with a custom "itemRenderer"? Unfortunately, I'm not able to do the same thing here and do appear correctly on the screen. I was wondering how I can associate the AdvancedDataGridColumn with an itemRenderer?

  Any help is appreciated.

  Thank you

  Shankar

  There must be something wrong with your code.  The best way to get help for this sort of thing is to modify one of our samples to reproduce the problem so that we can reproduce it and focus on the thing that it does not.

  BTW, in version 5.5 the com.vmware.ui.lists.ColumnSetContainer API is still supported but has been deprecated, we recommend that you set the extensibility of the column directly in plugin.xml such as shown in samples of chassis-app 5.5 (you don't need all component Flex, but cannot display text). This is to ensure compatibility with future major version.

• Detailed form Master in Apex - creating main records and details at the same time

  I m trying to create a master form / retail.
  The master is a simple standard form and below on the same page there is a tabular presentation containing the details.
  
  I am facing a problem when you try to save a new record from the master at the same time with new details.
  If I create a new record of the master and at the same time create detail records for this master (on the same page), when I submit that the foreign key of the details field is not filled in. So only one master record gets inserted into the table and record line is not inserted.
  
  When I have everything first create a master without a detail and edit this master and then add details so everything's allright (since the primary key field is filled out at the time).
  
  I just need to confirm that whether in the APEX form master detail, can save master and line record at the same time or is it as master must be registered the 1 and then line must be enterd and saved?
  
  Please let me know, if this functionality can be achieved in the APEX.

  Hello

  There was an error in the process of pl/sql, you referenced f01 (F01. COUNT) in the loop condition and which should have been f03, also you have assigned the wrong field to what should have been P3_DEPARTMENT_ID

  I fixed that. Also, I'm not 100% sure but I think in order to use the table in the column must be of type text or something (and not hidden), but I can't check now because of lack of time.

  A few mistakes during the presentation, but they are still due to constraints on the other fields.

  FOR I IN 1.APEX_APPLICATION. G_F03. COUNTY

  LOOP

  APEX_APPLICATION. G_F03 (I): =: P3_DEPARTMENT_ID;

  END LOOP;

  Concerning

  Bottom

• objects and text on the screen appear to be "stretched" horizontally.

  all objects and images on the screen seem to be "stretched" horizontally with all applications and web sites.  A good example is a picture of someone... the normal image is large and thin person... on my screen, they appear to be shorter and wider... lol

  find manual for my screen... it is AOC model 2219V1.  As I have explained, I tried to change the resolution.  When I change the resolution on my side of the computer, then my husbands is affected.   There is something that I realized that I can't re-create or find...  You have any other suggestions... Thanks for your help.   What would happen if I reload windows software... do you think all the settings back to the original settings?  If I reload windows, will I lose the documents and files on my computer?

  I do not see where you said you tried to change the resolution.  You have changed the DPI, but it's different than to change the resolution (although can be connected to ALSO change the resolution.)

  The resolution is not independent - that is when you change the resolution of the screen of the user, it is on this size for all users of the computer.  Your original problem was:

  all objects and images on the screen seem to be "stretched" horizontally with all applications and web sites.  A good example is a picture of someone... the normal image is large and thin person... on my screen, they appear to be shorter and wider... lol

  This means that you are using a large non-ecran on a screen resolution and screen is allowing it to fill the entire screen.

  You say you have the AOC 2219V1 monitor)<-- linked="" to="" there)="" and="" according="" to="" the="" specifications="" on="" that="" web="" page,="" the="" resolution="" you="" want="" to="" set="" the="" monitor="" at="" is:="" 1680="" x="" 1050="" @="">

  So, in your case, if you have the correct driver for your video card installed * and * says video card supports widescreen resolutions (what is a new monitor?) then you should...

  1.	Open display in Control Panel.
  2.	On the tab settings in the screen resolution, drag the slider to the right until it shows the parameters of selection to 1680 x 1050, and then click apply.
  3.	When you are prompted to apply the settings, click OK. Your screen becomes black for a moment.
  4.	Once your screen resolution changes, you have 15 seconds to confirm the change. Click Yes to confirm the change. Click No or do nothing to return to your previous configuration.

  Now - if you do not have the choice of 1680 x 1050, it is a new monitor and you have the latest driver for your video - card, then probably your video card was not made to support screen widescreen resolutions.

• How can I create a gallery with text under the pictures?

  Hello. IM new in Muse and im trying to learn. My next challenge is to make the thumbnails with text like this:

  

  And when visitors click a thumbnail, it should appear at the original size image in a lightbox. A pic of big mouseover

  should also work.

  Like this site. Affinity surfaces | Gallery of color here they have text on the pictures and when you click on it, it shows the full pic aize

  Any tips?

  My goal is to create my own page-art where I show and sell my work

  You can use a blank publication

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• CS6: export "range of time markers" without defining in - entry / exit point or set the work area?

  Hello

  in CS6, I've defined several "range of markers of time" to get a better overview of my project. Now I want to export each range in a single video.

  The only way to do it is to create in - entry / exit points or the definition of the work area (which is the English translation of "Arbeitsbereichsleiste" (German),...?)?

  Or is it possible to set this selection through the established range of time markers? That would be the easiest way...

  Thank you, Carlos

  I don't believe it.  The markers are a few guides, really.  They do not control a lot.