Problem in sending HTTP request on the server.

Similar Questions

• Can BBM sends the HTTP request to the server

  
  

  You can make your application HTTP connections.  The BBM API are not involved with it.  Guide to networking found here: https://bdsc.webapps.blackberry.com/java/documentation/ww_java_networking/Intro_networking_1984362_1...

• Problem in sending the request to the server, MDS started after expired connection error

  Hello

  I have a problem when sending request to the server. I need to manage the time of connection error. When I send a request from my device to serve and connection time-out error, I need to send the request back to the server.  To test this error, before sending the request, the MDS quit and then I try sends the request to the server. After 2 minutes, the appliance up Connection Timed out Error.

  Now when I start the MDS and refer the request to the server, the request sent when the connection has expired also reached the server. (Totally 2 request are sent to the server).

  What is the behaviouir of MDS? If so how should I handle this.

  or have I missed something on my side?

  I use BlackBerry 4.2.1 JDE with SDM (4.5.0)

  Thanks in advance.

  (Note: see this link for the behavior of MDS.)

  Hi all,

  I finally found the solution.

  Everytime I go to start the net, I check that the connection is available or not by using below codes...

  HttpConnection conn=null;try    {    conn = (HttpConnection) getConnection(myURL);      if(conn == null)     {           Inform the user the process is in offline       }     catch(Exception e)      {      }      finally      {                try                {                    conn.close();                    conn = null;                }                catch (Exception e)                {                    conn = null;                }            }
  

  When this function is execute the connection is not closed properly.

  After that I got the connection error, start the MDS, meanwhile runs unclosed connection.

  Now, I removed the check above, its works very well.

  I made a mistake. Finally, I saw that and correct it.

  Once again thanks for all your opinions and answer.

  Sorry for my English.

• I get this when I try to send e-mail with an attachment that Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Hotmail as well as all the problems of Windows Live are Windows Live Solution Center. It's their jurisdiction.

  Please post on forum discussions for Hotmail:
  http://windowslivehelp.com/forums.aspx?ProductID=1

• How to send a file in the server of the University Complutense of MADRID using the Code?

  Hello

  I tried several times to upload a file to the server of the University Complutense of Madrid from the adf page, but I can't do it.

  First: I have used this method to do, but it feel that the file downloaded successfully and when I open the server I haven't found this...

  	public String addNewContent() {}
  	InputStream fileStream = null;

  	try {}
  	createConnection();
  	String filePath = "C:\\Users\\Administrator\\Desktop\\ucm classes\\Class1.java";
  	String autherName = "weblogic";
  	fileStream = new FileInputStream (filePath);
  	= New File (filePath);
  	String [] fileTitle = filePath.split("/");
  	long fileLength = new File (filePath) .length ();
  	param.getBinder (.putLocal (CMConstants.CM_SERVICE_NAME),
  	CMConstants.CM_CHECKIN);
  	param.getBinder () .putLocal ("dDocType", "Application");
  	Title of the downloaded file
  	param.getBinder () .putLocal ("dDocTitle", fileTitle [fileTitle.length - 1]);
  	Name of the author
  	param.getBinder () .putLocal ("dDocAuthor", autherName);
  	Content security for (Group and account)
  	param.getBinder () .putLocal ("dSecurityGroup", "Public");
  	param.getBinder () .putLocal ("dDocAccount", "");
  	param.getBinder () .putLocal ("dFormat", "text/html");
  	param.getBinder () .putLocal ("xCollectionID",
  	(getFolderIdFromPath ("/ Contribution dossiers/22 /"))) ;
  	param.getBinder () .addFile ("primaryFile", file);
  	param.setServiceResponse (param.getIdcClient (.sendRequest (param.getIdcContext ()),
  	(param.getBinder ()));

  	InputStream myInputStream = param.getServiceResponse () .getResponseStream ();
  	String myResponseString = param.getServiceResponse () .getResponseAsString ();
  	System.out.println ("downloaded file Details: \n" +)
  	myResponseString);

  	DataBinder myResponseDataBinder =
  	param.getServiceResponse () .getResponseAsBinder ();

  	System.out.println ("file uploaded successfully");
  	} catch {(IdcClientException idcce)
  	System.out.println ("IDC customer Exception occurred. Cannot download the file. Message: «+»
  	idcce.getMessage () + ", the stack trace:");
  	idcce.printStackTrace ();
  	} catch (IOException ioe) {}
  	System.out.println ("IO Exception has occurred. Cannot download the file. Message: «+»
  	ioe.getMessage () + ", the stack trace:");
  	ioe.printStackTrace ();
  	} catch (Exception e) {}
  	System.out.println ("Exception occurred. Cannot download the file. Message: «+»
  	e.getMessage () + ", the stack trace:");
  	e.printStackTrace ();
  	} {Finally
  	If (param.getServiceResponse ()! = null) {}
  	param.getServiceResponse (m:System.NET.Sockets.Socket.close ());
  	}
  	If (fileStream

  ! = null) {}try {}fileStream.close ();} catch (Exception e) {}e.printStackTrace ();}}}

  Returns a null value.

  }

  ----------------------------------------------------------------------

  Second: I used this method, but it did not work also

  	public String uploadFile() {}
  	try {}
  	String inputFile1 ="";
  	UF UploadedFile = (UploadedFile) inputFile1.getValue ();
  	String filePath="C:\\Setup\\mmm.txt; »
  	InputStream fileStream = null;
  	try {fileStream = new FileInputStream (filePath) ;} catch (FileNotFoundException e) {}}
  	String [] fileTitle = filePath.split("/");
  	long fileLength = new File (filePath) .length ();

  	//	DataBinder Binder = IdcClient.crea
  	param.getBinder (.putLocal (CMConstants.CM_SERVICE_NAME),
  	CMConstants.CM_CHECKIN);
  	param.getBinder () .putLocal ("dDocAuthor",
  	"weblogic"); If the user is admin, can specify any user
  	param.getBinder () .putLocal ("dDocTitle", "titleee");
  	param.getBinder () .putLocal ("dDocName", "nameee");
  	param.getBinder () .putLocal ("dDocType", "DigitalMedia");
  	param.getBinder () .putLocal ("xCollectionID",
  	getFolderIdFromPath ("/ files/11 Contribution")); parent folder
  	param.getBinder () .putLocal ("dSecurityGroup", "Public");
  	param.getBinder () .putLocal ("dDocAccount:", "");
  	param.getBinder () .putLocal ("xComments", "Review of Montreal");
  	param.getBinder () .putLocal ("xWCTags", "Montréal");

  	param.getBinder () .addFile ("primaryFile",
  	new TransferFile (fileStream, 'child',
  	fileLength,
  	"text/html"));
  	ServiceResponse response =
  	param.getIdcClient (.sendRequest (param.getIdcContext ()),
  	param.getBinder ());

  	} catch (Exception e) {}
  	System.out.Print("");
  	}

  	Returns a null value.
  	}

  -------------------------------

  Can someone tell me what's wrong? !

  Thank you

  This will definitely work

  package demo;
  
  import java.io.*;
  import oracle.stellent.ridc.*;
  import oracle.stellent.ridc.model.*;
  import oracle.stellent.ridc.protocol.*;
  import oracle.stellent.ridc.protocol.intradoc.*;
  import oracle.stellent.ridc.common.log.*;
  import oracle.stellent.ridc.model.serialize.*;
  import oracle.stellent.ridc.protocol.http.*;
  import java.util.List;
  
  /*
   * This is a class used to test the basic functionality
   * of submitting a checkin to Content Server using RIDC.
   */
  
  public class TestRIDCCheckin {
  
      public static void main(String[] args) {
          // Create a new IdcClientManager
          IdcClientManager manager = new IdcClientManager();
          try {
              // Create a new IdcClient Connection using idc protocol (i.e. socket connection to Content Server)
              IdcClient idcClient = manager.createClient("idc://localhost:4444");
              // Create new context using the 'sysadmin' user
              IdcContext userContext = new IdcContext("sysadmin");
              // Create an HdaBinderSerializer; this is not necessary, but it allows us to serialize the request and response data binders
              HdaBinderSerializer serializer = new HdaBinderSerializer("UTF-8", idcClient.getDataFactory());
  
              // Databinder for checkin request
              DataBinder dataBinder = idcClient.createBinder();
              dataBinder.putLocal("IdcService", "CHECKIN_UNIVERSAL");
              //dataBinder.putLocal("dDocName","TestRIDCCheckin");
              dataBinder.putLocal("dDocTitle", "Test RIDC Checkin");
              dataBinder.putLocal("dDocType", "Document");
              dataBinder.putLocal("dDocAccount", "");
              dataBinder.putLocal("dSecurityGroup", "Public");
              dataBinder.addFile("primaryFile", new File("c:/test.txt"));
  
              //dataBinder.putLocal("doFileCopy", "1");
  
              // Write the data binder for the request to stdout
              serializer.serializeBinder(System.out, dataBinder);
              // Send the request to Content Server
              ServiceResponse response = idcClient.sendRequest(userContext, dataBinder);
              // Get the data binder for the response from Content Server
              DataBinder responseData = response.getResponseAsBinder();
              // Write the response data binder to stdout
              serializer.serializeBinder(System.out, responseData);
  
          } catch (IdcClientException ice) {
              ice.printStackTrace();
          } catch (IOException ioe) {
              ioe.printStackTrace();
          }
      }
  
  }
  

• often a note: size of bad request to the server to a large part

  When I click in my emails on a link to a Web site, I often get a note:

  Bad request

  Your browser has requested that this server could not understand.
  Size of a request header field exceeds the limit of the server.

  I asked my provider KPN if they can solve this problem, but they informed me that this problem is related to the browser I use, in this case Firefox.
  To this effect, they cannot support me with this.
  I've already updated Firefox to version 4.0 but they problem resists.

  Can anyone please help me, as I had this problem in the past.

  Thanks in advance.

  This problem may be caused by corrupted cookies.

  Clear the cache and cookies from sites that cause problems.

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".

• Cannot send e-mail to the server... get alerts of demand... except on a local wireless connection

  This had led me batty since I got the phone.  My mail server is on my local network.  If I send an email from the local network without wire of the pre to my mail server quite well.  If I try to send an email via the network of sprint - or actually on the network wireless anyone, he's going through.  I can sit here a my firewall monitor and the see through and I can also see it connect to my email server, so I know not that there is a good connection there.  I don't have any problems with imap works in any situation with the pre, so I'm sure something happens.

  My firewall rules are the same for IMAP/IMAP-SSL/ESMTP/ESMTP-SSL (with just the ports change.)  I am able to send an email from my client of the laptop to my mail... Server and able to send an email from my Treo 755 p using snappermail on the network of sprint very well.

  The firewall is PFSense 1.2

  Mail server is Courier 0.62.1 running on Centos 4.7 (no firewall running ip)

  Really confused!

  Thank you

  Done this, and it still doesn't get me anywhere.

  But I end up finally solve the problem...

  It seems that my server ident checks had to timeout... who was taking too long for the final customer... so needless to say I said to my server does not perform a check ident and email send accelerated time.  good thing is this speeds also send other things too.

  It seems that the timeout for sending electronic mail of the pre is 'short' as< 30="" seconds="" or="" so..="" i'm="" not="" sure="" what="" the="" standard="" timeout="" should="" be..="" but="" my="" issue="" appears="" to="" be="">

  Thanks halula for trying to direct me towards some additional info, but that debug information was not useful... I ended up doing some pre openssl commands and synchronization between local and remote have been, well... huge... once I passed this point... a moment of work helped google in the right direction.

• HTTPS connection to the server using the connection

  Hello! It is a part of my code to connect to a secure server.

  However, it is not show me if the connection has been connected. Is there something wrong with my code?

  ' Public Sub validateUser (String usernamelogin, String passwordlogin) throws IOException {}

  HttpsConnection httpConn = null;
  String url = "https://myserverpage/login?";
  InputStream is = null;
  OutputStream os = null;
      
  Cookie string ="";
  Params string;
  params = 'name =' + usernamelogin;
  params += "& password =" + passwordlogin.replace (' ', '+');

  try {}
  Open an HTTPs connection object
  httpConn = (HttpsConnection) Connector.open (url + params);
  Setup HTTP POST request
  httpConn.setRequestMethod (HttpsConnection.POST);

  httpConn.setRequestProperty ("Cookie", cookie);
  httpConn.setRequestProperty ("Accept_Language", "en-US");
  Content-Type is essential to pass parameters in a POST request
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
        
        
        
  httpConn.setRequestProperty ("name", usernamelogin);
  httpConn.setRequestProperty ("password", passwordlogin);
        
  secure https
  If SecurityInfo = httpConn.getSecurityInfo ();
  Certificate c = si.getServerCertificate ();
  Object String = c.getSubject ();

  This function retrieves this connection information
  getConnectionInformation (httpConn);

  OS = httpConn.openOutputStream ();

  OS. Write (params. GetBytes());

  / * ATTENTION: os.flush () is controversial. It can create unexpected behavior
  on some mobile devices. Try it for your mobile device * /.

  OS. Flush();

  Read the response from the server

  StringBuffer sb = new StringBuffer();
  is = httpConn.openDataInputStream ();
  int chr;
  While ((chr = is.read (())! = - 1).
  SB. Append ((Char) chr);

  Web server returns only
  System.out.println (usernamelogin + "is connected" + sb.toString ());

  } {Finally
  If (is! = null)
  is. Close();
  If (OS! = null)
  OS. Close();
  If (httpConn! = null)
  httpConn.close ();
  }

  }

  The fact of this aid.

  http://supportforums.BlackBerry.com/T5/Java-development/implement-basic-HTTP-authentication/Ta-p/445...

• Sending a file from the server to the client

  Hello
  
  Inside of a table, I have a commandButton control which, by pressing on it, I call a method in a bean. Inside the method, I want to send a file that is located in the server in a path like C:\tmp\myfile.pdf to the customer. How can I do?
  
  Thank you
  Will do

  To do this, you use a fileDownloadActionListener you put on an existing button. Using the properties of the listener, you specify the content type of hat, a file name (not necessarily the actual file name), and a method in a bean that is called when the use clicks the button. In this method, you listen to the file (from your servers path) to the client.
  Check out my blog http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-1/ (especially part 2 BOF a sample).

  Timo

• Flash builder 4.6 - send batch data to the server (php connected)

  Hi, I recently downloaded flashbuilder 4.6 and started developing my first mobile application.

  Just to explain the meaning of my problem/question, I want to manage a local database offline (insert data into a table) and manually sincronize a database server (push a button-> add batch of documents to the Server table).

  Suite of tutorials, I was able to manage a local database sqlite, I had the connection to the database server (mySQL) with php and have populated Data/Services Panel (services test works very well).

  Unfortunately I'm not able to send local data, batch to the server. A few lines of code below (debug I got no error and no results).

  Something wrong in the code?

  Or did I take a wrong way to solve my problem?

  Thanks in advance for your interest

  protected function button_clickHandler(event:MouseEvent):void

  {

  var LocalDatabase:ArrayCollection =... < loaded from the database sqlite >

  var RecordToAdd: MydataTable;    table of server data to fill

  for (var i: int = 0; i < LocalDatabase.length; i ++)

  {

  RecordToAdd = new MydataTable;

  RecordToAdd.Field1 = LocalDatabase [i]. Field1;

  RecordToAdd.Field2 = LocalDatabase [i]. Field2;

  ...

  createMydataTableResult.token = MydataTableService.createMydataTable (RecordToAdd);

  createMydataTableResult.token = MydataTableService.commit ();

  }

  }

  solved...!  .. just had to avoid the null fields in RecordToAdd

• Problem with special characters when retrieving the server information

  Hi all

  I use a HttpConnection to get data from a server, and sometimes there are a few very unusual characters. The data comes from the server in the format UTF-8 and converted into ISO-8859-1 does not work for Cyrillic more obscure.

  I looked into this and I just can't work at what point in this code, I can convert the character set.

  HttpConnection connection = (HttpConnection) Connector.open(url
                      + connSuffix);
  
              connection.setRequestMethod(method);
              if (method.equals("POST") && postData != null) {
                  connection.setRequestProperty("Content-type",
                          "application/x-www-form-urlencoded");
                  OutputStream requestOutput = connection.openOutputStream();
                  requestOutput.write(postData);
                  requestOutput.close();
              }
              int responseCode = connection.getResponseCode();
              if (connection instanceof HttpsConnection) {
                  HttpsConnection secureConnection = (HttpsConnection) connection;
                  String issuer = secureConnection.getSecurityInfo()
                          .getServerCertificate().getIssuer();
                  UiApplication.getUiApplication().invokeLater(new DialogRunner("Secure Connection! Certificate issued by: " + issuer));
  
              }
  
              if (responseCode != HttpConnection.HTTP_OK) {
                  screen.requestFailed("Unexpected response code: "
                          + responseCode);
                  connection.close();
                  return;
              }
  
              String contentType = connection.getHeaderField("Content-type");
              ByteArrayOutputStream baos = new ByteArrayOutputStream();
  
              InputStream responseData = connection.openInputStream();
              byte[] buffer = new byte[10000];
              int bytesRead = responseData.read(buffer);
              while (bytesRead > 0) {
                  baos.write(buffer, 0, bytesRead);
                  bytesRead = responseData.read(buffer);
              }
              baos.close();
              connection.close();
  
              screen.requestSucceeded(baos.toByteArray(), contentType);
          } catch (IOException ex) {
              screen.requestFailed(ex.toString());
          }
  

  Everything works fine, but I really want to convert the output to UTF-8.

  Thanks for any help in advance.

  Does that help?

  InputStream responseData = connection.openInputStream ();
  ubyte [] buffer = IOUtilities.streamToBytes (responseData);

  responseData.close ();

  Connection.Close;

  String redsponseString = null

  try {}

  responseString = new String(buffer,"UTF-8");

  }

  responseString was correctly converted using UTF - 8.

  You might want to empty the bytes received using something like this:

  http://supportforums.BlackBerry.com/T5/Java-development/convert-UTF-8-encofed-text-to-hex-decimal/m-...

• Javafx 2.0 deployment request to the server web and accsess by URL

  Hi all
  
  I built a JavaFx 2.0 using Netbeans 7.1 application. He created an html file, a jar jnlp file a file with the name of the project. Now, I want to deploy my application on a server for example glassfish or tomcat so that any user can access the URL.
  
  Is it possible to deploy the application on the server. If so, how?
  
  I found a link
  http://docs.Oracle.com/JavaFX/2.0/deployment/deploy_overview.htm
  Here he described various mode of executions. In a run mode it say that we can launch the application from a remote server using Web Start. But I'm not able to get the steps how to achieve this.
  
  
  Thank you
  Vikas

  You deploy a client application via a network, you cannot be sure that the computer that is running the client application will have the configuration property file in the location you are trying to access (unless your application he wrote). Even if the file is there that you must sign your application deployed to have access to it, which is usually an unnecessary hassle.

  As an aside, use the code format specifiers (see thread sticky at the top of the forums) to apply inlining code in forum posts because it makes the code more readable.
  -----
  For that to work, you must package configuration properties inside your pot with the rest of your resources, then you can load it via:

  pro.load(LoginPage.class.getResourceAsStream("config/config.properties");
  

  OR, if you can't bundle configuration properties in the pot, for example because you want to vary the configuration regardless of deployment of a new pot, you can host on your Web server configuration to a relative location where host you your application and get it from here:

  HostServices hosting = getHostServices();
  pro.load(new URL(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties")).openStream());
  

  For example, if the application jar is located in the ROOT/webapps of tomcat directory, and you want to access config/config.properties using HostServices, then place config.properties in the webapps/ROOT/config/config.properties

  Now, if you have specific user rather that wide application configuration, you will need to implement a web service for storing specific user configuration and to read and write from that or you need read and write the configuration of the user on the local drive by using the jnlp FileService for unsigned application , or any where on the disk if you have a signed application.

  However, it seems that your configuration is to store only a hostname, the port and service network app path. If you can make the path to the app for your network service in relation to where you deploy your application and save the relative path as a constant in your application, you could get only the information of:

  HostServices hosting = getHostServices();
  URL serviceURL = new URL(hosting.resolveURI(hosting.getDocumentBase(), APP_PATH));
  ServiceCommunicator.HOSTNAME = serviceURL.getHost();
  ServiceCommunicator.PORT = serviceURL.getPort();
  ServiceCommunicator.SERVER_APP_PATH = serviceURL.getPath();
  

  In this way, you wouldn't have to define, maintain and load a separate config.properties file.
  In addition, with the path of the service against your deployment application facilitates application host elsewhere and denies the need to sign the application for network services to work when the application is deployed in embedded mode webstart or browser.

  Published by: jsmith on January 20, 2012 01:11
  I thought that you could load a properties with just a url string, but it must in fact be a stream, so I've updated the call to load the properties in order to take a course of water.
  Has changed

  pro.load(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties");
  

  TO

  pro.load(new URL(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties")).openStream());
  

• HTTPS connection to the server with the host name which has its IP address

  Hi all
  
  I work in a development of the solution where a server application is running in a machine and hosts of Application Service SOAP over HTTPS. The server has the certificates for its IP address. My client application tries to use the SOAP Service; but when I connect to the Application Server using the HOST name in the URL, I get the SSLException indicating that the HOST name does not match name the object.
  
  If I use the IP address in the URL, it works well - but I do not like the server application can move to different IP dynamiccaly - if you are using DNS is our solution to hide this complexcity from client applications.
  
  Help, please.
  
  Kind regards
  Kaja

  the HOST name does not match name the object.

  The host name does not have the name of the topic in the server certificate. He agrees with host.domain name.

• Mac Mail not keeping does not send a message on the server

  Option is selected, but message are keep on "on my Mac".

  http://screencast.com/t/lVspCL78

  How can I view eamil all across all devices in the sent folder? or trash?

  Keep all device in sync IMAP messages?

  If I send emails from the iPhone, I want to see the email on iMac after.

  NOTE: I do not use icloud mail, I use

  ********

  Help, please

  You need to configure mail accounts and on your iPhone at all use the IMAP protocol.

• How to send a file to the server using the flash?.

  How can I send a photo for example to set up a virtual catalog and preview my album?
  I use a simple form with 5 fields of transmission and the small image after submission.

  If you want to download a file to your server using flash, use the Flash filereference class (and its upload() method) and backend scripts.