Problem Inspiron 1564 and 5.1 sound

Similar Questions

• Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

  Hello

  I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

  I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

  Thank you

  Amira.

  2 months old?

  It is under warranty.

  Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 ot Dell Inspiron 1564 bluetooth problem

  My Dell Insiron 1564 cannot detect bluetooth. I tried with the drivers from dell for Dell inspiron 1564, but I can not install them. I also tried some tips with other drivers, but I could not install either. Could you please help me. Thank you!

  Same problem, I got Windows 8 '64-bit' o/s,.
  solution is to use the Bluetooth driver ("R235168")

  Steps to follow:

  ----------
  (1) go to the URL http://dell.to/S3vwvD the 'R235168' download) Bluetooth Driver and remove it.

  (2) open the folder after that extraction is complete.

  3) navigate to the folder until the folder as \r235168\r235168, for me the path is C:\dell\drivers\R235168\R235168.

  (4) open the folder (Win 32 or Win 64) depending on your configuration of file system of windows, for me, Win 64.

  (5) open the file 'Inst.exe', a full install with the wizard.

  Results:

  ------------

  The driver is correctly installed and running (I used and works perfectly)

  Thanks to DELL-Marjoram N & Saturn865

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• His problem, I've disabled all sounds and disabled my sound card. There is always a warning tone. Why?

  Original title: sound problem

  I've disabled all sounds and disabled my sound card. There is always a warning tone. Why?

  Hello

  When does this beep?

  It probably comes from the speaker of your motherboard.

  Listen to the PC (put close your ear) while producing the sound and then compare it with putting your ear near a speaker.

  Tricky

• Problems with Dell Factory Image Restore - Dell Inspiron 1564 - Windows 7 Home Premium

  Hello

  My laptop (Dell Inspiron 1564 - Windows 7 Home Premium) slowed down a few days ago and I decided to restore the system to Dell Factory Image. The process started but stopped at most of halfway and gave the following message: "unable to apply the Image. I rebooted the system, but it would now not start, not even in safe mode! Perhaps, during the process of restoring a few essential Windows files have been erased.

  I want to restore the Image of Dell and can not reinstall Windows because I lost the product key of my Windows 7 original installation DVD provided by Dell at the time of the purchase of the laptop. Your help / advice is solicited and would be much appreciated.

  Thank you.

  P.S. The system recovery Partition is intact and has factory.wim and other related directories / files intact.

  If you use the Windows 7 Home Premium DVD Dell reinstallation it will automatically apply the Dell OEM SLP activation. In short, a product key is entered from the DVD and active if and only if the BIOS is validated by Dell to perform Windows 7. Therefore, you do not have the key 25-digit number on the certificate of authenticity. If you want to know the code then look under the battery.

  See here for more details:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-7/Windows-7-installation/

• Inspiron 1564 video problem

  Hello

  I am running windows 8.1 on my Dell Inspiron 1564 i3. I downloaded the video drivers from the dell product support page and I tried to install the video driver, but installation does not begin with the error "this computer does not have the minimum requirements for installing the software. Is there a fix/way/trick to install the video driver on windows 8.1?

  Thanks in advance,

  Oscar

  Hello

  Thanks for joining us.

  Given that the Inspiron 1564 was never delivered with Windows 8 or 8.1 of the factory, we do not have the compatible drivers for these operating systems.

  However, you try to install the video drivers Intel or AMD Web sites according to the graphics card, have you in your laptop. It should cross fine without any errors.

  Thank you

• Dell Inspiron 1564 plugged in, does not support

  Someone knows something about the Dell Inspiron 1564 which does not load when it's plugged in?

  
  Moved from Hotmail

  Hello

  What operating system is installed on the laptop?

  I suggest you check the connections, connect it correctly or contact Dell also refer to this link.

  If you have a spare power adapter only to login and check.

  I suggest you to refer to the articles and check if it helps:

  Solutions to common battery problems

  http://Windows.Microsoft.com/en-in/Windows7/solutions-to-common-battery-problems

  Taking care of your laptop battery

  http://Windows.Microsoft.com/en-in/Windows7/taking-care-of-your-laptop-battery

  It will be useful.

• My cell phone rings when turned on DELL INSPIRON 1564

  Hello

  My laptop gets a continuous (like beep beep) when beep irritated his turned on very audible sound and is

  This is exactly when the dell logo is turned on and it stops for a few seconds and comes again for 2 to 5 seconds on the windows logo any solution is needed really very irritating sound... the sound started for about 15 days and continues, but before that he came two or three times within a period of 6 months

  Sorry for my bad English, but please give me a solution I tried the Diagnostics and found everything was perfect

  Here are the beep codes for the model Inspiron 1564:

  One, motherboard Possible failure - BIOS ROM checksum
  Two RAM not detected - NOTE: If you installed or replaced the memory card, make sure that the memory is installed correctly.
  Three Possible - Chipset error motherboard failure
  Four RAM read/write failure
  Five, the real time clock failure
  Six, card failure, or video chip
  Seven, processor failure
  Eight, failure of the display

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

• Satellite Pro P100: horrible clicking, jerking and occasional crackling sound

  My machine is a beloved Satellite Pro P100 (with funky orange cover).
  My niggle, becoming a regular pub was the theme of mine, it's that play card Conexant High Definition Sound one clicking horrible, jerky and occasional crackling sound.

  I did the usual updates and the latest driver BIOS and installed equipment.
  No joy, still more trouble for the people of The Black Horse.

  Speakers, something overheating, loose screws and all the wrong cover color were advanced as the other sources of the problem.
  Even more fatigue, mental and even a suggestion I continue this conversation in the company of people who actually care!

  Anyway, here's my last.
  I don't get the problem when playback of .wmv files, for example, the bear fishing video sample that comes when you install Vista.

  MP3s and FLACs and sound just as WAVs scratched vinyl, but the bears fishing, nice and crispy...

  Hello!

  Have you tried external speakers on your laptop?
  It could be a hardware problem, but if you test other speakers you can determine if it s a sound card or a s question House speaker. Check it!

  And have you checked all the sound settings in Windows? Maybe you can find a setting wrong in equalizer or elsewhere.

  Have you tried to reinstall the notebook using the Toshiba Recovery disk? It contains the factory settings and you should try this before contacting an authorized service provider.

  Good bye

• Sound on boot to top... turn crackling, distorted and then no sound

  Hello

  I hope someone could shed some light on my sound problems. My sound started to do. I turn on the computer and the sound seems to work very well, and then after using the computer a bit, the sounds can range from the crackling or distorted and then off. Sometimes, but rarely, the sound will come back from time to time.
  I can restart and the sound is back again... or I can both lose sound, reinstall the driver and I have sound, until the same thing happens.
  I installed the most recent driver, direct x, the windows media player 10. I have a toshiba mobile phone running windows xp. I have install recently more... two ram 512 chips, different brands.

  best buy think my motherboard can go...
  any ideas?

  Hello dawn

  It's very strange question. I've never heard of this. Unfortunately, I have no explanation for it, but I can't imagine that it is caused by the wrong driver or something like that. In any case, you can try and remove the sound card in Device Manager, then restart the device. Operating system detects hardware and install the driver.

  Otherwise, maybe is it some problem with connections and the sound is just sometimes.

  As I have already said, it's very strange question. I am very interested in this topic and if you have a solution please let me know.

• Problem with RUNDLL and sthelp.dll.

  I have windows XP on a small Dell Inspiron.  When I start a dialog box titled 'RUNDLL' appears and has the following message: "error loading: C:\Documents and Settings\...\Application Data\sthelp.dll.» The specified module could not be found. "I downloaded Malware Bytes and run a full scan - it found nothing.  I have been devoted to the application of msconfig, clicked on the Startup tab and tried to disable the checkbox where this dll is called upward, but the operating system seems to want to find when they start the computer.  What can I do to get rid of this nuisance? When I close this dialog (RUNDLL), the computer works fine... it is every time at startup.  Any help would be appreciated.

  There is no XP file called stehelp.dll and Googling, there is nothing reasonable and a bunch of bad ideas.

  Looks like it's a vestige of some malware that has been partially removed from your unspecified brand system and the model with the specified, unspecified XP Service Pack version and not specified where the antivirus/antimalware applications.

  These message types are quite common things to do after that some malware was only partially removed FRO your system, so I suggest the following:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns
  .  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry.  There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html

  Consider making a manual, just System Restore Point in case you have to undo the changes.

  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Do a complete analysis from time to time when you have more time (in hours).

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.