problem of export FTP?

Similar Questions

• Problems to export a whole book project for an overview in PDF

  I use Photo 1.0.1 to make a book and I have problems to export to PDF.  Books is almost 100 pages but when I try to get a glimpse of a PDF file or export to PDF, it let me only to get a PDF of the first 16 pages. I have not seen a dialog box that allows me to adapt the numbering of pages.

  I tried to print in PDF format, but since the book is made up of a mixture of individual pages, and spreads it "spreads" to adapt to the standard page size clips and gives me margins on all of my pages full of purge.

  I'm working on the book for several members of the family and I wish I could send them a preview before you buy. It worked on the books I've done in the past and I don't know what has changed.

  Try this way preview - Preview of a project to print Photos, iPhoto or Aperture to avoid problems - Apple Support

  Save the PDF file

  LN

• Problem with export OMF of AMC to the hearing

  Hello

  I'm having a problem with my export to OMF of Avid Media Composer in Adobe Audition (CC). The problem occurs when I export two audio tracks that is from a camera (lets say that Canon c100), and they are separated from two mono tracks in Avid. When I open the OMF in hearing, there are always two mono tracks, but all the audio clips that came from the same video file and have the same name, are not copied correctly. One of the tracks is ok, but the second track is just a copy of the first. This means that I lose the audio that was on the second track (because it is replaced by the audio that was on the first track). I think it has something to do with the clips, basically with the same name. So far, I works around this problem by exporting two OMFs, one for each track, but it's uneeficient and stupid.

  Did someone encountered the same problem?

  No solution predictable hearing but if you want to send me a small test session (info at aatranslator dot com dot to the) I'm sure that LAOS would like to convert it properly. I realize that this does not solve your problem, but I'd certainly be interested to test.

• Problems to export to Excel in Acrobat XI

  I have some problems to export a PDF to excel in Acrobat Std or Pro XI, but not in Acrobat Std or Pro X.  When exporting in X all the columns and rows are created as they should be, but in XI everything is slammed to the left in a column.  Someone knows something like that and is there perhaps a setting that miss me in the process of automatic conversion in X but not in XI?

  Thanks in advance for the help.

  I thought about it.  I called the customer service at the back (800) 585-0770 to prove that even if the day 30 trial of Acrobat XI worked well, I bought a new drive does not properly Adobe export. Adobe technology go on my computer to combat it and made a lot of tests.  He then made an update to Acrobat Xi.  If using Mac, open Acrobat, click on HELP at the top left, and then select get the updates.

  Once the update has been installed, everything worked fine.

  I hope this helped... try an update...

• Problems with export and import

  I have a problem with export and import
  
  Here's what I did...
  

  exp "'/ as sysdba'" PARFILE=parfile.txt
  
  PAFILE
  
  TABLES=user1.Table1
  file=Table1_1006.dmp
  LOG=Table1_1006.log
  query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"

  Here is my log export
  

   set and AL16UTF16 NCHAR character set
  
  About to export specified tables via Conventional Path ...
  Current user changed to user1
  . . exporting table               Table1   16019049 rows exported
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  Export terminated successfully with warnings.

  Then I started to import
  

  /database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
  
  Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  Export file created by EXPORT:V10.02.01 via conventional path
  import done in US7ASCII character set and AL16UTF16 NCHAR character set
  . importing user1's objects into user1
  IMP-00015: following statement failed because the object already exists:
   "CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
   "EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
   "ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
   "RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
   "TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
   " "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
   "CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
   "AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
   "EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
   "" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
   "SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
   "ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
   "EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
   "DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
   "(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
   "ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
   "MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
   "VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
   "R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
   "  PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
   "NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)            "
   "                   LOGGING NOCOMPRESS"
  Import terminated successfully with warnings.

  but I have no lines of base2
  

  [server1]database2
  /database2/rdbm15> sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
  
  Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select count(*) from user1.Table1;
  
    COUNT(*)
  ----------
           0
  
  SQL> exit

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
  PL/SQL Release 10.2.0.5.0 - Production
  CORE    10.2.0.5.0      Production
  TNS for HPUX: Version 10.2.0.5.0 - Production
  NLSRTL Version 10.2.0.5.0 - Production

  Published by: user3636719 on October 6, 2011 17:23

  could ignore = y, and then try again. It should work

  Concerning
  Julien

• Problem with export! Help, please

  Hello

  I am currently working on my new project in Redcode 4.5 k shoot and I got in big trouble export my movie.

  I tried to export the movie to the H.264 format / HDTV 1080 p 25f and there was NO noise or a sound terrible when I looked the exported movie!

  Can it be a problem that I copied a number of sequenzes varius in a sequence? I did it because I wanted to have a sequence where I can put the pieces together.

  Maybe that's the problem!

  Please help me!

  M

  Guten Tag,

  Am fantastischen an meinem neuen Projekt und beim Exportieren ist folgendes aufgetreten problem:

  ICH Versuche in first Photo aus einer zu exportieren sequence das mit dem Vorgabe Format H.264: HDTV 1080 p 25f dann erhalte ich einen Film mit entweder Bel your oder mit einem hohen Pfeiffen.

  DAS Filmmateriao das ich wurde auf einer bearbeite redone Redcode Codec quality 4.5 k.

  Kann're breast dass der nicht ist weil ich fertig einzelne possible export sequences kopiert habe und einer neuerstellten sequence zusammengefügt habe, eine quasi sequence as scenes standing habe um sie fertig sleeps aus the other scenes-sequences zusammenzustellen.

  Ware toll wenn someone could help!

  Danke

  M

  Hello! Welcome to the forums here at Adobe!

  As long as you can hear the sound when you play through your final sequence, you should have no problems to export as long as your audio options are correctly set in your export Panel. Nesting of the sequences that you have described is a very common task and will not at all affect your audio files.

  Make sure that your "Export the Audio" checkbox is checked in the window of your export. If this isn't the case, then that would explain your problems. If it is checked, then there may be something more deep as the cause, in which case it would be helpful if you could post us screenshots of your table of sound mixing and the head section of your audio tracks in the timeline panel.

  Also make sure that you're using Adobe PrPro 5.5 and that you have all the updates correct, including the RED importer, as the new RED files do not work in older versions of first. If files were shot on the RED Epic, sound doesn't work at all in native file (known bug) first and so you will have to use program Cine - X RED to export audio files to make separately and synchronize with your video. However, you would never get audio in your timeline at all, and so I think you would have noticed this problem before that you have to export, so I think that's not your problem.

  Good luck and report what you find with your export settings!

• Problem with export history related to the incopy file

  Hi all

  I am facing problems when exporting all stories in a document as an incopy files. I use Edition-> Incopy-> export-> order stories & graphics all. The document contains a lot of out of the page text boxes and a huge related story that flows through a number of textframs linked, this real content related story. The story also contains tables and images of the arrival. When running above the export command, I get files incopy for all charts and out of text boxes box but not to the related main content.

  It is a document provided by one of my clients. I'm actually a plugin developer and have no knowledge of very deep design. I'm trying to understand what could be the possible reasons for this problem.

  I tried the same command with that two executives linked text box. It creates the incopy file. What I could have done wrong in my document. All suggestions will be welcome.

  Thank you

  D

  Again, I have encountered the same problem a few days back and understand what is happening.

  Related tagged frames of related texts that are closely linked with the xml structure could not be exported to InCopy when the xml structure has lack of start and end tags.

  This case occurs when the xml content is paid within the frameworks of related related texts, part of the content (para or image caption) is moved to different textframe unrelated. This action leaves a placeholder to the linked frame tag (used to move content back in place if ever, newly created frame has been removed) causing an inconsistency in the xml structure.

• Strange problem with export to jpg files

  I'm having a strange problem with exporting my vector files to jpg.  When I export the file as a .jpg file, then open it some text or shapes (such as rectangles or squares) have disappeared.  When I go back and open the file .ai the stuff is there, but he just went on the jpg.  If I open the .ai file in Photoshop it's gone too.  I have to save the file in pdf format, then open the PDF in Photoshop and export in a file .jpg away.  It's very strange.  If I go into the Illustrator file and re - type the text disapers, it usually fixes the problem.  I'm not an expert with Illustrator, then I can do something wrong, if anyone can help please let me know, thanks! (I have CS3)

  Things that are disppearing are defined for a recovery? Look in Control Panel attributes with objects selected and see if all the overprints are defined.

• I ve using Muse for quite some time now. I love. But when you use the latest version and a new website I have a problem with the FTP export function.

  I've never had this happen before? I ve used Muse for a long time now and it has always worked well.

  Download Muse ONLY php and css files when I use export to the FTP host. No html? It has never happened before.

  If I export to HTML and use my regular FTP program to transfer to the correct host folder it works fine.

  
  

  In fact, if I try to update the site of work of Muse, to load on the FTP host, Muse removes html files in the folder and the site no longer works...

  Anyone?

  Please try to check if the exported file includes all of the files, try to export again in a new folder, and then check.

  Thank you

  Sanjit

• Problems with "export to HTML".

  Hi, I will try this software with the 30 day trial period, but I have a problem with the function described in the title.

  This problem occurs when I try to export as html from the home page of the site that I am building, in particular with regard to the social widget for Facebook and Google plu (I'm talking about words similar widget took from each site developers page, not on the widget implemented in Muse).

  When I try to look at the preview of the browser (file-overview page on the browser), everything is ok, the social widget is where he should be and he seems fully functional. Now, when I export the page to HTML widgets disappears and I have tried several solutions, but I don't know where is the problem.

  There is someone can help me?

  Some embedded HTML 3 third party sites (such as Facebook and Google +) does not view via the "file" Protocol (which is what you use, if you export to a folder, and then open the html file in your browser).

  These built-in widgets expect to be viewed on the "http" Protocol, which is what your browser uses when you choose "Preview in browser" or to view a site Web online online.

  You can try to publish your site to a temporary site of BusinessCatalyst to check online and make sure that everything appears as expected, or use FTP to transfer files to your 3rd party webhost - when you view the site online at http, you can check if the widgets are working as expected.

• Missing camera problem - cannot export (share options greyed out)

  I'm under El Capitan 10.11.3

  10.2.3 FCPX

  I7 MacBook retina (2012)

  8 GB RAM

  I worked on my calendar, creating several minutes of content.  In the background as well as media files import and transcoding, I noticed that all my stock options were grayed out.  I learned that I stumbled upon import of problems due to the lack of space on my external hard drive as they are for most of the 4K files.  I understand that when you work with 4K you can work, but you must wait until all transcoding of files before exporting a show.

  I also made the mistake to rename some of the clips in the bin case after being placed on the timeline (I think this might be part of my problem).

  This combination of import to a drive with enough space to allow the final transcoding with name change has created a lot of clips of CAMERA MISSING - so NO the ability to share.

  I bought a larger capacity drive and copied all the files in the new storage of 2 TB.

  One - I do an import/reimportation of camera/player.  (in some cases if it does not work - I am again an import - then try to link)

  I am finally able to exit then restart and see FCPX that my changes TAKE so I think I'm on the right track.  Sharing options are grayed out still, but I think that once all are properly reassociated on the timeline, I should be ok - right?

  Here are my questions:

  Why not see problems with my events (no yellow warning sign) everything seems fine - I can change but can not export?  Sharing options are still grayed out?

  Then if I stop/restart FCPX - all yellow and Red warnings lack of cameras back.  I thought I solved the problem, but sometimes getting rid of missing camera is a big chore.  I'm on the right track?

  Thank you very much for your help!

  It is important to allow the import of the whole process independently of the clips - not only 4 K resolution. And part of this process is transcoding if you choose optimize. So I think you're on the right track - you have files with incomplete optimized versions. Suggest that you select your clips in the browser, right-click > transcode media and create optimized media. Open the window of background tasks and monitor if transcoding is started and if it ends.

  Post back and let us know whether or not exporters continues to be a problem.

  Russ

• problem when exporting

  

  So I tried many different video editing apps - iMovie, DaVinci solve 12, Filmora and, finally, Final Cut Pro X I really like FCPx however, as iMove, I'll have trouble exporting. Specifically with FCPx, the error is greater. Anyone know what could be the cause?

  < image edited by host to remove the serial number >

  Different is a problem to a specific image number. Change the FCP general preferences to display images. Go to the chassis number and see if there is a problem. Maybe a little problem on the media. Try to replace the clip.

• Problems with GZip &amp; FTP

  Hello

  in my application, I need to send a file compressed using ftp.

  To do this, I used a class initially write to use with J2SE (SimpleFTP)

  I have change for use with RIM API and it work with file bit compressed (like 4 KB) but when I try to send one just a little big (12Ko) I have a problem to decompress: gzip - me to say end of file unexpected.

  It is a bit of cod used:

  //In a thread i create the connection and change to BIN
  ftp.connect(ip, port, user, psw, true, apn, apnUser, apnPsw);
  ftp.cwd(dir);
  ftp.bin();
  
  //here I obtain a csv representation of my object and store it in a //String var
  String csv = r.toCSV();
  
  //this method ask to ftp object to store a ByteArray in the file named //file and i want to zip it and return true if all is ok
  if (ftp.stor(new ByteArrayInputStream(csv.getBytes("UTF-8")),file,true))
  //...do things
  

  the method of object ftp stor have this code:

  /**
   * Sends a file to be stored on the FTP server. Returns true if the file
   * transfer was successful. The file is sent in passive mode to avoid NAT or
   * firewall problems at the client end.
   */
  public synchronized boolean stor(InputStream inputStream, String filename, boolean zipped) throws IOException {
  
      sendLine("PASV");
      String response = readLine();
      if (!response.startsWith("227 ")) {
          throw new IOException("SimpleFTP could not request passive mode: " + response);
      }
      String ip = null;
      int port = -1;
      int opening = response.indexOf('(');
      int closing = response.indexOf(')', opening + 1);
      if (closing > 0) {
          String dataLink = response.substring(opening + 1, closing);
          String[] tokenizer = Functions.splitString(dataLink, ',', -1);
          try {
              ip = tokenizer[0] + "." + tokenizer[1] + "." + tokenizer[2] + "." + tokenizer[3];
              port = Integer.parseInt(tokenizer[4]) * 256 + Integer.parseInt(tokenizer[5]);
          } catch (Exception e) {
              throw new IOException("SimpleFTP received bad data link information: " + response);
          }
      }
      String url = "socket://" + ip + ":" + port + urlParam;
      Logger.log(this, "Try to open passive connection to "+url);
      SocketConnection dataSocket = (SocketConnection) Connector.open(url);
      dataSocket.setSocketOption(SocketConnection.LINGER, 5);
      dataSocket.setSocketOption(SocketConnection.DELAY, 5);
  
      sendLine("STOR " + filename);
  
      response = readLine();
      if (!response.startsWith("125 ")&&!response.startsWith("150 ")) {
          dataSocket.close();
          dataSocket=null;
          throw new IOException("SimpleFTP was not allowed to send the file: " + response);
      }
      Logger.log(this, "Connected to "+url);
  
      OutputStream output;
      if (zipped)
          output = new GZIPOutputStream(dataSocket.openOutputStream(),GZIPOutputStream.COMPRESSION_BEST);
      else
          output = dataSocket.openOutputStream();
  
      byte[] buffer = new byte[512];
      int bytesRead = 0;
  
      while ((bytesRead = inputStream.read(buffer)) != -1) {
          output.write(buffer, 0, bytesRead);
      }
  
      output.flush();
      output.close();
      output = null;
      dataSocket.close();
      dataSocket=null;
  
      response = readLine();
      return response.startsWith("226 ");
  }
  

  The readline() and sendline("") methods read or write to the ftp decision-making, a line ended with CR and I so need to send FTP commands

  I think that everything is ok, for this problem I find in a forum that the problem will be the use of ASCII in FTP method, but I change to BIN

  Any idea?

  Thank you in advance!

  Hello

  Finally, I solved the problem.

  I find the solution in the documentation GZIPOutputStream

  You must pass OutputStream to GZIPOutputStream, zipping it and then you must close GZIPOutputStream but you must use the original OutputStream.

  So in my SimpleFTP class I have to write about gzip, close it then flush() and close() the original outputstream.

  Knit

  I had the new method of stor() here to see

  /**
       * Sends a file to be stored on the FTP server. Returns true if the file
       * transfer was successful. The file is sent in passive mode to avoid NAT or
       * firewall problems at the client end.
       */
      public synchronized boolean stor(InputStream inputStream, String filename, boolean zipped) throws IOException {
  
          sendLine("PASV");
          String response = readLine();
          if (!response.startsWith("227 ")) {
              throw new IOException("SimpleFTP could not request passive mode: " + response);
          }
  
          String ip = null;
          int port = -1;
          int opening = response.indexOf('(');
          int closing = response.indexOf(')', opening + 1);
          if (closing > 0) {
              String dataLink = response.substring(opening + 1, closing);
              String[] tokenizer = Functions.splitString(dataLink, ',', -1);
              try {
                  ip = tokenizer[0] + "." + tokenizer[1] + "." + tokenizer[2] + "." + tokenizer[3];
                  port = Integer.parseInt(tokenizer[4]) * 256 + Integer.parseInt(tokenizer[5]);
              } catch (Exception e) {
                  throw new IOException("SimpleFTP received bad data link information: " + response);
              }
          }
          String url = "socket://" + ip + ":" + port + urlParam;
          Logger.log(this, "Try to open passive connection to "+url);
          SocketConnection dataSocket = (SocketConnection) Connector.open(url);
          dataSocket.setSocketOption(SocketConnection.LINGER, 5);
          dataSocket.setSocketOption(SocketConnection.DELAY, 5);
  
          sendLine("STOR " + filename);
  
          response = readLine();
          if (!response.startsWith("125 ")&&!response.startsWith("150 ")) {
              dataSocket.close();
              dataSocket=null;
              throw new IOException("SimpleFTP was not allowed to send the file: " + response);
          }
          Logger.log(this, "Connected to "+url);
  
          OutputStream output = dataSocket.openOutputStream();
          byte[] buffer = new byte[512];
          int bytesRead = 0;
  
          if (zipped){
              GZIPOutputStream zipOutput = new GZIPOutputStream(output,6, GZIPOutputStream.MAX_LOG2_WINDOW_LENGTH);;
              while (!isAskForAbort() && (bytesRead = inputStream.read(buffer)) != -1) {
                  zipOutput.write(buffer, 0, bytesRead);
              }
              zipOutput.close();
          } else {
              while (!isAskForAbort() && (bytesRead = inputStream.read(buffer)) != -1) {
                  output.write(buffer, 0, bytesRead);
              }
          }
          if (isAskForAbort()){
              abor();
              output.close();
              output = null;
              dataSocket.close();
              dataSocket=null;
              try {
                  setAskForAbort(false);
              } catch (BbException e) {/*nothing to do. Here ftp is conected*/}
              return false;
          }
          output.flush();
          output.close();
          output = null;
          dataSocket.close();
          dataSocket=null;
  
          response = readLine();
          return response.startsWith("226 ");
      }
  

  Thank you much for the help.

• PIX and problem of virtual FTP hosts

  I have a Cisco PIX (version 6.3 (3)) behind which I have all my ISP customers. I have a web server outside the PIX hosting various web sites on an IP (virtual hosts). People outside the PIX can send via FTP on the web server without any problems. People inside the PIX cannot. We have this problem until I started using virtual servers on the server FTP and assignment of different FTP port numbers for each of the web sites. (We only had a single site on the web server until a few days ago.) I guess it's a problem of PIX because that's the only difference between access to the FTP server for my customers of the ISP with non. So, my question is that I have to open also the new FTP on my PIX port numbers? I already have "fixup protocol ftp 21". I should add similar statements for each of the new higher ports? I'm new to using a PIX; We didn't cover them in my CCNA and CCNP courses. Also, I can FTP virtual hosts located on other servers of Internet service providers, which makes no sense to me. Thank you.

  Hello

  I assume by "higher port numbers" are the new ftp servers listening on ports other than the default port 21. If this is the case, then you are quite correct to say you need to add the correction commands more.

  The active way FTP works is that a control connection is established between the client and the server over tcp 21, and then they negotiate a data port. The * server * then initiates a connection to the customer on this port.

  Normally, this isn't a problem for the pix, because he looked at the control connection on port 21 and understood that it was necessary to open a hole for the connection on the new port, but if you do ftp on ports other than 21, you must specify the pix 'look' that port as a ftp control connection so it can then open the firewall for the data connection.

  You can verify the fix here

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a8.html#wp1067379

  The short but you need an outgoing access list for the new ftp port entry (say it's 2525), then to consult as if it were the ftp, the command "fixup protocol ftp 2525"

  -Jason

  Be sure to note if it helps.

• Problem of export of the slideshow in the 1080 p format

  Hello

  I slot in slide show of the United Nations created Lightroom, latest version.

  When I export it to the format 720 p video, everything works fine.

  On the other hand, when I want to export it to the 1080 p format, the progress bar in the top left appears. But nothing is happening, be it after 5 minutes, 2 h, see all night. The slide show is not exported.

  I could utiiese that others had this same problem.

  Y ' a t it a solution identified this problem? a fix is planned soon?

  Thank you pour your answers.

  Jérôme

  Please see this post about a slide show 1080 p problem when using vertical orientation image files.

  Re: Lightroom 6.5/2015.5 will not export slide show 1080 p

  Try to remove the vertical orientation (portrait) all files from the picture slide show and see if slide show video 1080 p export works.