Problem of invert tool pen

Similar Questions

• Problem of seliction tool pen

  Hello

  PS6

  I'm having a problem making a selection with the pen tool. When I draw a box and right click and select 'select', it will make a selection of the area I've attracted, but also selects the whole photo. In other words, the ants running around the area of the pen tool drawing and also around the whole photo. I use a separate layer to draw with the pen tool. I don't understand what I'm doing wrong. I want only the selected area of drawn pen and not all photo.

  Thank you

  Check and if necessary change the path operations in the Options bar.

  

• Problem with the tool pen creating a fill when I want only the stroke

  Hello

  I'm having a problem. I create a simple spider for a project. Initially, I used the pen tool to make the legs. He worked for a bit, then started suddenly in an area that I has yet to draw with the fill color. I don't know what I did to cause this happens. Any help would be appreciated. Thank you

  

  This form shows a yellow fill, probably from the last shape you drew.  If you select the form and clear the fill, your drawing will return to black lines only.

• strangeness tool pen

  Im having a very strange problem with the tool pen when you use it to hide.  I click on my first point, then the second, but after that it turns into adds a Summit.    He then added my new points to the wrong places.  If I do a new it comp sems to work ok but used to work in the computer that I need. Im working with 3d layers and I noticed this happens when Im right with the camera zoomed really far.  If I Zoom out, it seems to be ok.  Why would it be?  I restarted hold SHIFT comm option, but he did not make a difference.   What should I do?

  If this thread is a year old, I found it all in troubleshooting, adding in case it helps others.

  I met the same problem as Arrakis, and I just thought of it: I had the layer I drew the mask akin to another layer that had been set to scale upward, so the value of effective scale of the layer, I was trying to hide was very small (but the largest scale of parenting). AE is obviously the treatment my layer as if it were 2% of full size, so all clicks past the other feather are passed to the tool adds-one Summit, despite the fact that the image is enlarged on the screen.

  I am sure that the issue was raised in the scenario the OP because 3D only to have the camera zoom before really far, the layer in question should be put on the really small scale.

  This happened to me several times in the past, and I've always been mystified, where this is happening to someone else, that's the problem. For me, the fix was again unparent, draw of the mask, then parent. For 3D, you may wish to hide first, then resize it down.

• Problem with the tool photoshop pen and little

  Hello, I have a problem with the tool feather of Photoshop cs5. I can barely see paths im making. Is it possible to fix it?

  Isee the pen tool paths im how's it's just makes it miserable to use this tool:

  http://ImageShack.us/photo/my-images/18/85169959.jpg/

  You can barely see the paths (I did a few trails to show the photos.)

  Secondly, in the bottom of the file it says "Exhibition in 32-bit only", even though I have windows 7 64-bit and 64-bit photoshop cs5.

  How to solve these problems?

  Thank you.

  The thing that says 32-bit exhibition (has nothing to do with what version of cs5 your use) could be here because you have already opened or created a document in 32-bit/channel mode.

  You can change what appears here by clicking on the little arrow and choose something else.

  

• How do I move the two forms at the same time using the tool pen

  I tried merging groups 1 2 and 3, so they can be handled together. I've grouped them and they merged, but when I try and move with the pen tool they move separately. For my project, I need to be able to change the shape of 12 and 3 using the pen tool, how would I go to do this?

  they set out like a vector Illustrator diagram, I've merged them there and imported, but they always move separately.

  Thanks in advance

  If you work with multiple masters and the tool pen, you use the Ctrl/Cmnd key to change the pen of a selection tool that resembles a small white inverted V. You can drag a selection around multiple points on a path and then hold down the SHIFT key and select more points on a different path. Once selected you release the Ctrl/Cmnd key and when you go near a selected vertex selection tool appears again, but this time it is a small black reverse V. and drag.

  If you want to transform these points then all you have to do is press Ctrl/Cmnd + t when they are selected and you will actually have a better tool paths of transformation you get in Illustrator.

  He is essentially on the functioning of the tool pen in Illustrator if you select the direct selection in artificial intelligence (the key) and then the pen tool (p key) and use the Alt/Option key to switch to the top to convert or Ctrl/Cmnd to direct selection points.

  BASIC Edition of masks stuff covered in the help files and explained in community resources, if you enter editing masks or change forms or the pen tool in the search help field at the top right of the AE.

  If you are using multiple forms on a single shape layer, you can do the same by providing that the forms are curves of Bézier or Rotobezier.

  If the paths of the form or masks are on separate layers, you are out of luck. There is no way to change the multiple paths on different layers at the same time. I don't expect that there is a way to do it. Here's a short demo:

• New path-layers of all lines with the tool pen?

  Hello! I am currently using Illustrator CS6 as a test version, and when I use the tool pen to make a beaver (school work), it all end in a single layer. I want to have a new layer-path of each line with the pen tool, so I can remove rows from the layer panel too. For the moment, it's a layer that has a picture of a beaver, and I can't see the individual lines that I drew. When I used CS5 recently I had no such problem.

  There is a setting that I can change or does have something to do with the news of CS6?

  If you want to see a 'sex' for each object changes the display of the layer panel by choosing Options from the Panel menu in the layer panel. In the lower part of the Panel options window, make sure that groups and objects are both checked. You will then see a 'sex' for each object.

  I quote 'sex' here because technically they aren't the layers. They resemble layers and are in the layer panel, but they do not exactly allow options that allow actual layers. You can select and move objects in the Panel this way however.

• Question of behaviour tool pen

  When I want to draw a line in the vicinity or exactly on a trajectory of filtration the pen tool don't sart a new path access but still the one 'old '.

  Read the help:

  Disable or temporarily replace the automatic pen tool

  You can temporarily replace or disable the automatic change of the addition of anchor or delete Anchor Point tool.

  • To ignore temporarily switching, hold SHIFT as you position the tool pen on the selected path or an anchor point. This is useful when you want to start a new path at the top of an existing path. To prevent the shift to compel the pen tool, release shift before you release the mouse button.
  • To turn off change, choose the command Edition > Preferences > General (Windows) or Illustrator > Preferences > general (Mac OS), and select Disable Auto Add/Remove.

  The pen pointer changes between X and / when I'm at a point nearby, a little further is no problem, but I want to be able to start a new path where I want to start.

  With or without shift etc. filtration continues by clicking on "new". What I am doing wrong?

  Daniel

  Version?

  At least through CS3, the pref to remove auto does not affect auto-join infuriating behavior of the Pen, which is what it looks like you're maybe strugging with.

  There is an incredibly clumsy substitution for that, too:

  Suppose you want to start a new path where a not selected (sheesh! Which is brilliant the idea was that a pen should DESELECTED path editing?) existing path begins or ends. MouseDown beyond a distance of magnetism where you want than to be; Press and hold the SPACEBAR while you drag to the location where you point it to be; then mouseup. The resulting will be the beginning of a new path, instead of auto - join the pre-existing not selected path.

  I don't know if this hellish behavior has finally fixed in CS4, or if a toggle preferably was provided, but I seriously doubt.

  JET

• Dynamic tool pen

  I use an iMac, mid 2011, worm 10.11.6 and PS CC, worm 2015.5.0.  I use the tool pen to make a path.  When I place a point and move them the tool to place another point, there is a line (path) which is connected to the first point of the tool pen, as I have the pen tool.  When I look at a tutorial of the pen tool there no line of the first point of the pen tool until you click to place the second point in position.  What causes this difference in the way the pen tool performs? A preference?  Can I change any setting that will allow my work of the tool pen as the tutorials?

  Thanks for your help?

  Looks like you have elastic checked in the options of the tool to the pen tool.

  If so, uncheck the elastic

  

• Where is the tool pen?

  It is a very simple question that I can't understand, and this may sound stupid. Where is the tool pen? I'm pretty new to sequels, I used CS6 for a long time but now in DC, I can't find the pen tool, it used to be in a bar on the top and now it is not there. I feel very stupid, and there is probably a very simple answer. I want to make a mask. IM on mac using Adobe after effects 2015.

  the first thing I teach my students is "reset workspace. When you start with the software and it has so many shortcuts you'll ruin things. probably, you don't see the tools Panel. Windows-> work-> reset standard space.

  and if you want, you can use the shortcut 'G '.

  see if it's ok now

• size of the line tool pen

  Is it possible to adjust the size or the color of the line that is made by using the tool pen?

  No, other than a hack to use with it to create a shape layer and put a hit on the way.

• Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?

  Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?

  Hi tonyc75479545,

  Greetings.

  Please check this thread - Photoshop CC 2015.1 liquefy lightens the result on the 16-bit per channel images

  Concerning

  Rohit

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• How to make the tool pen show a guide of my line from one point to another

  I need help on how to change my tool pen where it will show an overview of my lines from one point to another. When I draw the line I place two points and then the line appears. How I do to where the line will follow my mouse pointer and then I select the second anchor.

  Maybe check your preferences > selection & anchor display > enable the rubber band for: pen tool

• Help with the tool pen when moving CS5.1 to CC

  I never use PS, but still did not used to the tool pen in CC, especially when compared to CS5.1.

  I would be eternally grateful if someone could tell me what I'm doing wrong or how do things!

  In CS5.1 I could draw a path with the pen tool, then command-drag on the line between two points to change the shape of the path between these two points. In CC when I ordered-drag path of shape changes but made the way across two points, I am working on.

  In CS5.1 only the length of the handles Bezier control altered, in CC length and angle of the altered control handles, which affects the path I want to change.

  So what I am doing wrong? I use the pen and the path a lot and I'll have to go back to CS5.1 to do any series and complex path works because I can not familiarize themselves with the new CC pen tool. Help!

  Post edited by: Tim Atherton

  Also, with the Direct Selection tool selected see if checking force path by dragging in the options toolbar makes a difference.