Problem SOLVED [ping SPIKE]! (if you have ping spikes, it is probably the answer)

Hey all,.

If you have a ping spike/temporarily stopped in connection with your wireless adapter, this is probably the solution for you!

You can read my story here of my previous thread about my problems and solutions I've tried along the way.

http://forums.linksysbycisco.com/Linksys/board/message?board.ID=Wireless_Adapters&thread.ID=22612

I have not yet official Linksys promised support they'd contact me and have not found a solution here in the forums I took matters a little further and did the research myself to fix this problem.

See my response below direcly for the solution.

So, the problem is mostly with people with linksys adapters and vista 64 (could also affect other OS, but found 64 a lot more when searching).

1. If you have 64 bit vista drivers, first download drivers 64 bit XP linksys for your card, then uninstall your current drivers completely removing them (via Device Manager) and all managers of linksys (via Control Panel > functions of the program)

2. restart your computer.

3. install 64-bit XP via Device Manager drivers > network card (should have an exclaimation mark next to him now) > update driver (then point on where the driver XP 64 is, to ENSURE that it has no. OTHER DRIVERS in THE SAME FOLDER! so after you download linksys files, DELETE ALL FILES BUT THE XP 64 bit ones.)

4. connect to your wireless router, then go to start menu > type cmd (open in administrator mode) > type [command netsh wlan set autoconfig enabled = no interface = "Wireless network connection"] (without the square brackets []), replace with all wireless network connection this as your network connection, your computer connects to.  You can check that you are connected by going here... Control Panel > network and sharing Center > manage network connections

Now you should have no problems with your connection, as well as ping spikes, check that it works by going to your command-line typing ping 192.168.1.1 - n 100

change the 192.168.1.1 to all what your router address, at the end of the audit, there was no spikes high and everything works!

Here is the part the shit, every time that you start your computer again or lose the connection with the wireless signal, you must re-enable the automatic configuration service in the cmd prompt, command netsh wlan set autoconfig enabled = yes interface = "wireless network connection".

And once you have connected to your router, you should disable this auto config connection.

I don't know how it will work on any other OS, but I guess it will be a similar solution (unless this question is strictly caused by 64-bit)

Now, seeing as how my other wireless adapters do not have this problem, I think that there is a problem with linksys and their drivers for these affected products. It of a gene to do these things, but I guess that's how things will work up to linksys sees this post and if everything goes well he corrected with a new driver update :-D

Feel free to post your success stories here! I will accept responses and congratulations in lieu of payment :-D

And if a moderator can sticky, I think this will help a lot of people because I noticed a number on these forums with this problem.

Tags: Linksys Adapters

Similar Questions

  • Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

    Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

    Hello

    1. this happens when you plug in the headphones?

    2. this happens to you while streaming music online?

    3. when exactly you get this message?

    Please follow the steps mentioned below.

    Method 1:

    Follow the steps mentioned below.

    a. click the Start button.

    b. in the Start Search , type Device Manager and press ENTER.

    (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

    Method 2:

    Please run the troubleshooter mentioned in the article below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    See also the below mentioned link.

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  • Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

    Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

    You have two options:

    • Perform the action under high administrator privileges.
    • Turn off UAC (not recommended).
    Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.

  • If you say that you have sent me Email to change the password, they have not been received.

    If you say that you have sent me Email to change the password, they have not been received.

    Several times I used sync for tranzfer of information to a new computer and or updated computer!
    In the last 24 hours I've sent many requests for 'change password' for those that I tried did not work, so I can connect!

    You say you sent an email over and over again, but no one came to my email which is confirmed you have the right address!

    There is absolutely no evidence that you tried to send an email to me, I checked the spam, I even looked to see if somehow, it went one folder other then my Inbox, nothing has been received on your part!

    Michael Serota

    Removed edit email and public telephone for spammers robots do not find.

    You can enter the wrong email address. I tested 2 fake emails in the password reset page and received the green check mark telling me that the password reset emails have been sent. It is not a real confirmation that your e-mail address is used by Firefox accounts.

    This is done this way so that hackers and spammers can not cheat the system by typing many kinds of emails at random and wait to see if they get a confirmation 'this e-mail address is. So for security reasons, all the entered addresses electronic are treated as real even if there is no account that corresponds to this e-mail.

    Please try some of your other email addresses here and see if you receive a password reset email in these accounts.

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • "You have 10 partnerships phone out of the maximum limit of 10 partnerships."

    I tried to install my application Mail of Windows 8 with my Hotmail address and it does not connect.  After a few minutes I received an email on the two parameters of the e-mail addresses as addresses backup on my Hotmail account, both with the notice "You have 10 partnerships phone out of the maximum limit" authorized 10 partnerships.  Now, I get this email every day.  I scoured the interface Hotmail.com/Outlook.com nothing works, I can not find anywhere device partnerships.  Whenever I do an online search I am assaulted with results on Exchange and Office 365... but I'm in any of these situations.  Someone know where I can find this elusive setting?
    Thanks in advance!

    Hello

    -You get the same error message when you access Hotmail/Outlook.com through webmail?

    I suggest to run the Troubleshooter app and see if you can add the Hotmail account in Mail application.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

     

    For more information, see the link.

    Application of mail for Windows: FAQ

    Let us know the results. We will be happy to help you.

  • Why don't you have a support phone number in the United Kingdom

    Why don't you have a support phone number in the United Kingdom  This is unacceptable.  You're almost imposible to contact when help is needed.  This seems to be the only way!  Please let me have a number that I can contact you

    This is the user to user forums.  If you need to contact the Support from Adobe here are links to help make contact:

    http://www.Adobe.com/support/chat/ivrchat.html

    http://www.Adobe.com/support/download-install/supportinfo/

  • You have a PDF to hold on the viewer screen automatically when exporting to InDesign CS4?

    You have a PDF to hold on the viewer screen automatically when exporting to InDesign CS4?

    If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (interactive), you can set the parameters for the layout display and Zoom.

    So that, as Jongware, its possible for individual users override this option (preferences > Page Display > default layout and Zoom) the number that will actually do that is actually very small.

  • Unable to write the email in the box to the letters. Make sure the file system allows write privileges, and you have enough disk space to copy the mailbox.

    How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me

    you have an anti virus? try to turn it off.

  • After you have reinstalled XP, trying to make the updates of Windows, getting error number: 0x8024400A

    I reinstalled xp system and have tried to make windows upated but I get the error number: 0x8024400A I tried to do what others say to do but Thies is not working I can't do fixit or me sat

    http://support.Microsoft.com/kb/2497281

    You may be unable to access the Windows Update site...

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:
      winver

      A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  • You have to put that feed into the PODCASTING app on your iOS device.

    I subscribe to premium podcast here

    and the title of this thread, that's what they told me to do to get this on my iphone and I don't have any idea what this means

    https://randirhodes.com/how-to-get-the-podcast/

    What app on your phone, you chose to listen to this podcast with?

    If this is the app of Podcasts native iOS, open the app, press the small + icon at the top left, tap ADD PODCAST.

    Enter the URL that have a link gives you, which is https://randirhodes.com/feed/premium

    You should see this sign in page, which, I assume that you have the information for.

  • You have any clues to move from the iPad to the iPhone?

    der hai o about to get an iPhone 4 my birthday you haz a clues to move from the iPad to the iPhone? halp plz

    Perhaps you could explain what you mean in your native language?

  • I asked a question on malicious software and a GOOD person suggested some downloads of AM. Used Spybot, Malware bytes and my NOrton and still a problem. What else do you have

    someone answered my question of malware a couple of days and suggested various anti-malware downloads. I used 3 of them and cleaned up things, but today, my laptop, tho much better, is still infected. At the end of his message was a suggestion to download something else... now I can not find his message. What was something Microsoft? in any case, my computer is much better, but not out of the Woods.

    Hi your earlier question is here

    use the 2 latest antimalware programs that I had linked.

  • If you have window color and appearance of the window?

    When I try to go to the window color and appearance it goes right to the choice of Vista Basic, Classic etc. and I can't change the color of windows.  I have Vista Ultimate and it really makes me mad.

    I tried all three and none have worked I'm ready to go back to windows xp SP3 to combat.

    You never bother to check if your graphics card could take support Aero?

    http://Windows.Microsoft.com/en-AU/Windows-Vista/products/system-requirements

    Support for graphics DirectX 9 with WDDM and 128 MB graphics memory (32 MB for the basic home edition)

    Read the above.

    Mick Murphy - Microsoft partner

  • When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

    When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
    will have no sound. (but in the contact box everything its fine) Why is this?

    Why is this?

    Because you forgot to patch source audio track.

Maybe you are looking for