Problem with a value using LOV Colon

Similar Questions

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• Problem with some values in the round of text

  Hello

  I have a problem with the control of the "ring of text.

  In my software, I need to update the values of ring of text, using a property node. But some values are not included by the ring of text, even if they are defined inside.

  I agree with you an illustration of my problem and the piece of code that does not work, I hope you can help me

  Thank you

  Julie

  Probably a result of the fact that the floating point numbers cannot represent exactly every real number.  Up to 0.4 is not exactly equal to 1e6 4th-7 x.

• Problem with the value by defect of the shuttle and transfer to the following site

  Hi alltogether.
  
  We have a problem with a shuttle service on a page at the Apex.
  
  The shuttle is filled by a pl/sql in a database and then wanted the values that are already in the database for that user defined by default on the right side of the shuttle.
  
  For the satisfaction that we used the way mentioned in the blog here:
  http://dgielis.blogspot.com/2008/01/Apex-by-example-default-value-of.html
  
  It worked well.
  
  Now we have a problem, and somehow, we can't find a solution here in the forum, or through google.
  
  By clicking Next, to have passed on to the next page in the workflow the default values sort are removed.
  
  If I look in the Session before the transfer, I see IDS are loaded as default values, but after clicking Next, the validation gives an error (the shuttle is not allowed to be null) and then the IDS are deleted when the session...
  
  We don't know where it comes from and hopefully someone here might be able to help us...
  
  Greetings
  Chris
  
  P.s: Don't mind my English please is not my native language

  Chris,

  As you say NOT NULL validation fails, but the session shows the values before you hit the other, pick up a calculation process or submit before calculations and Validations that might be reset the shuttle.

  Have you tried running the page with debug and observing the execution path?

  If no aid above maybe you can do a test on apex.oracle.com case?

  Kind regards

• Problem with flight when using no call blocking

  Hello
  
  I have a scenario in which I need to call a service several times based on header lines. I used the following approach to reduce the execution time:
  
  1. use flight with "n" being the no. lines in the header.
  2 call the service inside the flow with nonBlockingInvoke set to true for the PL. The assignment of the var of entry for the service takes place inside of flight activity.
  
  The problem with this approach is that the assignment happens correctly. for example. LineId1 is assigned to the service entrance in the first stream, LineId2 the second rate and so more..., but in the used input variable values by invoke remains constant in the first mission that produced the first stream Viz LineId1 will be happened as an input for all activities of other flows, despite the copy in entitled operation happening properly.
  
  Can anyone share some thoughts on this?
  
  Kind regards
  Sandeep

  Hi Sandeep,

  I think the mistake you make is that the defined variable to call the service endpoint (i.e. the input of the invoke activity variable) should not be a global variable, but instead should be defined as a local variable in the scope that contains the activity of flight.

  Concerning
  AYUSH

• Problem with the iPad using kindle app.

  WE have 2 iPads, iPad 3 and the air of aniPad. Nor are working using the kindle App freezes and looks like he's trying to download or open a book. Which of the two in the lower part shows also cloud and who is on the side of the unit?

  Amazon made the kindle app, not Apple.

  If you have problems with the app-contact Amazon Kindle.

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200298460

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• have a problem with windows mail using vista, it won't send mail it's just continues to ask the user to verifery a password

  windows Vista mail problem

  have problems with windows mail with vista, it will not send an email he just keeps asking to verifery user, a password have checked all the settings a knowledge they are correct... can connect to the server an everything is ok... get this error msg... Account: 'att.net', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] invalid username or password. (#YSH001)', port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92... on this for 2 days may not understand... Please help?

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  It will be useful.

• problem with windows mail (using Vista) after automatic updates installed

  After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

  Hello

  Try the following methods:

  Method 1:

  Try to download and reinstall Windows Mail using the link:

  http://support.Microsoft.com/kb/941090

  In the link above, go to download and install the update.

  Method 2:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Reference:

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Problem with the Gateway using Vista laptop battery

  Hi all

  I've had this laptop Gateway for a year now and I have had this strange problem with it probably a good 3 months to own. Basically the little thing of battery indicator on the bottom right of the task bar will say "plugged in, not charging" while the laptop is plugged. So this is my little ghetto rig which leads me to believe that is not the battery or the charger which gives me the trouble.

  While the laptop is plugged in, and moan about there is no life left blah blah, I pop the battery and back in. Hop, I magically have full battery and be able to unplug the laptop for mobile use.

  I've read a lot online that it is a Vista problem, that I am running, and not a hardware problem. I would really like to know if this is true, because I am a student and prefer not spend the precious material fixing money when this is not the problem. As stated earlier, cell phone charges when it is plugged in, it SAID only that it does not load. When I pop the battery, it works fine until the next time that the battery is exhausted and then I plug it in and have to redo the same platform of ghetto.

  It's just a little a downside to keep popping up that darn battery in and out, and frankly, I don't think it's good for the laptop to keep doing this, even if it's worked for me for about 7-8 months now.

  Can someone please offer information about this weird issue?

  Thank you very much.

  Why my battery portable MD Gateway or Gateway MC series doesn't load at 100%?
  http://gateway-us.custhelp.com/app/answers/detail/A_ID/2624/kW/battery%20not%20charging/session/L3NpZC9UKjJBcnNsaw%3D%3D

  Also in this forum:
  Gateway Laptop: plugged in, does not support
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6db4fe50-D318-44DA-a938-2fc58f4bbe7b
  on one of the post of Leaky.

  I hope I could help

• problem with my 'in use Catalogue', lightroom does not start!

  Hello, I have a problem with my "Catalogue". My laptop battery was empty, he went, once restarted, lightroom does not start... He keeps giving the message that the catalog is already used... I tried to reinstall lightroom, select a new catalog, but these options don't work... Please help me because I can't work now!

  Hi liannem,

  What version of Lightroom?

  With Lr closed go to the location where your catalog (by default it is pictures/Lightroom)

  Remove the . Lock file with the same name as your catalog. For example, in the image below, it is Lightroom4 catalog.lrat.lock

  

  In your case, it will be Lightroomcatalog.lrcat.lock(Lightroom6/cc)

  Restart Lightroom

  Let us know if this helps

  ~ Assani

• Problem with the value of the checkbox and app.settings.getSetting)

  Hello everyone.

  I have a problem with is settings saved for checkbox.

  Saved settings does not apply on the value of the checkbox.

  It's strange, but it always 'true '.

  Here is piece of code:

  checkMe = 11;    //any value for the first time running
  
  
  if (app.settings.haveSetting("savea", "chck")) {                            
                        checkMe = app.settings.getSetting("savea", "chck");  // get saved value, else 11
                        alert("checkMe = "+checkMe)
                          }
                      if(checkMe == 11){
                          checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                          alert("You run this script first time, so manual value will be 'false'")
                          }else{
                              checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
                          }
       alert("Yes, checkMe will = "+checkMe)        
      
      
  win.checkPanel.chkOne.value = checkMe;  /// checkbox value will equal saved checkMe
  
  var fff = win.checkPanel.chkOne.value;  // string for alert
   alert("aha! but checkbox value is  = " +fff+ "\n Why so?")     // here we`ve got always "true"
  
  
  
  
  win.checkPanel.chkOne.onClick  = function () {
          
      var path11 = win.checkPanel.chkOne.value;  //  checkbox value to variable
      app.settings.saveSetting("savea", "chck", path11);  //saving checkbox value
      alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
            }
  
  

  win.checkPanel.chkOne.value is always true.

  Can anyone exmplain why and how to get rid of this static value?

  P.S. just in case, here's the complete code:

  function mainFun() 
  {
  
  
      this.windowRef = null;
  }
  
  
  
  
  mainFun.prototype.run = function()
  {
      
      /*----- UI -----*/
            var retval = true;
            var win = new Window("palette", "Check option", [150, 150, 460, 455]);
            this.windowRef = win;
  
  
      
            win.checkPanel = win.add("panel", [25, 150, 285, 265], "Checkbox");
            win.checkPanel.chkOne = win.checkPanel.add("checkbox", [10, 15, 125, 35], "Checkbox One");
            //win.checkPanel.chkTxtOne = win.checkPanel.add('edittext', [140, 15, 230, 35], '');
  
  
       win.quitBtn = win.add("button", [110,275,200,295], "Close");
  
  
  checkMe = 11;    //any value for the first time running
  
  
  if (app.settings.haveSetting("savea", "chck")) {                            
                        checkMe = app.settings.getSetting("savea", "chck");  // get saved value, else 11
                        alert("checkMe = "+checkMe)
                          }
                      if(checkMe == 11){
                          checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                          alert("You run this script first time, so manual value will be 'false'")
                          }else{
                              checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
                          }
       alert("Yes, checkMe will = "+checkMe)        
      
      
  win.checkPanel.chkOne.value = checkMe;  /// checkbox value will equal saved checkMe
  
  var fff = win.checkPanel.chkOne.value;  // string for alert
   alert("aha! but checkbox value is  = " +fff+ "\n Why so?")     // here we`ve got always "true"
  
  
  
  
  win.checkPanel.chkOne.onClick  = function () {
          
      var path11 = win.checkPanel.chkOne.value;  //  checkbox value to variable
      app.settings.saveSetting("savea", "chck", path11);  //saving checkbox value
      alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
            }
  
  
  
  
  
  
            win.quitBtn.onClick = function() { 
                win.close(); 
            }
  
  
      win.center();
            win.show();
  
  
            return retval;
    
  }
  
  
  if(typeof(mainFun_unitTest) == "undefined") {
      new mainFun().run();
  }
  
  

  A quick glance, I'd say it's because when the pref that is saved as a string, so after having read it you must control if (checkMe == 'true') rather than check it out as a Boolean value.

• Problems with the audio using Hulu on Apple TV

  We meet a few important issues in streaming Hulu through Apple TV. The problem is with the audio. When we start a new episode of a television show, frequently, there is no audio data. The audio plays fine during the advertising leading up to the episode, but then he went to the start of the episode itself. Last night, for example, we tried to watch an episode of Casual. No sound. I restarted the same episode 3 times (which meant, annoyingly, I had to attend the same ad 3 times), and each time it was audio at the announcement, but then no sound during the episode. I unplugged Apple TV, wait a minute and plugged in. Choose the same episode and had the same problem.

  Before last night, we were sometimes able to get audio on Hulu content, but it is seldom worked without similar problems - there is no audio data, or sometimes there will be audio briefly but then it disappears. We will not experience this problem streaming other services by the Apple TV, such as Netflix, HBO or with iTunes media. Any advice?

  It is a second generation Apple TV, purchased in September 2010.

  Exactly the same problem with Hulu here on ATV2. Its been like that for months and only getting worse. Also, randomly that it recharges during playback. If you can spend the first few minutes of couple of a show (by the start/stop several times) it will play the rest of the show OK.