Problem with New-OSCustomizationSpec during the deployment of a new virtual machine

Similar Questions

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• problem with credentials named during the agent deployment

  Hi gurus.

  Yesterday, I have deployed an agent on a host of test server and it worked like a charm.

  Except that...

  I used the oratest user under the name of credentials... This meant (I think) that when it came to detect different targets on the host to monitor, OEM could not see that those who belonged to oratest (couldn't see oratest database).

  It was not ideal because it is has several databases I want to monitor on this server.

  So I uninstalled everything and now trying to deploy an agent once again, using this https://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#EMBSC184

  However, I am now stuck on the choice of a credential named... which user should I choose for this? I need to create a separate, "oem" user to do all this? I'm not even sure that the choice of the user oratest was a mistake... I'm more than a little confused and would appreciate some advice kindly.

  Version: 12.1.0.4.0

  RHEL 6.5

  Thank you

  CAI

  ALL THE:

  I learned that in addition to plugins, make sure (for the discovery of the db) that your Oracle home must be located in the oratab

  In addition, if you have sort of a default location for your listener.or according to the $TNS_ADMIN, then it must be placed in your agent owner bash_profile.

  Above and outside.

• Problem with Windows update during the installation of the printer

  I tried several times to install an older printer to the Epson (Stylus Photo 925) on a computer running Windows XP Professional.  When I get to the part of the installation where I select the printer from a list in Windows this printer is not available, so I chose to Windows Update the list.  I've done several times, and the list of Epson printers is actually reduced after selecting the 'Windows Update' button.  Its unusual because a few weeks ago, I did the same configuration for a new machine of Windows 7 and Windows Update added this printer to the list.

  I should add that my printer is on a print server if the installation is a bit more detailed than just plugged in the USB cable and installation.

  If anyone can help with this question?

  Updates required driver from the download page of the device manufacturer or the computer, not Windows Update. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Having problems with itunes and during the uninstall and re - install error 2350 would come to the top?

  I'm not sure when the problem occurred, maybe 2-3 weeks ago and trying to create a restore date system before the 'problem'... the dates do not go far enough?

  Hi Kabramble,

  ·         Did you the latest changes on the computer?

  Check out the link to the Apple Web site and try the steps mentioned below.

  Bugs and Error Messages

  http://discussions.Apple.com/thread.jspa?threadID=786774

  For further assistance, you can post your request in the forums of Apple.

  http://discussions.Apple.com/category.jspa?categoryID=150

  You will no more find system restore points if they are not created.

  Restore points are saved until the system restore reserves HDD space is filled. As new restore points are created, old ones are deleted. If you disable the Protection System (the feature that creates restore points) on a disk, all restore points are deleted from this drive. When you turn System Protection, new restore points are created.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Error during communication with the remote host when you create the new virtual machine

  I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine

  on the vcenter Server

  At the end of 30-35 minutes, it gives an error

  "Error during communication with the remote host"

  The existing machines are working well... I tried to create virtual machines to other ESX servers as well

  but the same question. I also tried to make the clone of existing machines, but without success

  Can anyone help?

  You rescan the LUNS once?

  You've restarted the management agent?

  You've restarted the vpxa?

  If this isn't the case, please perform the step above and check out them.

• Deploy the new virtual machine with version 7 on vSphere HW 5

  Hello

  Is there a parameter / method of new virtual machines with the 7 deplpy (and NOT HW version 8) hardware on a vSphere host version 5?

  We currently have a mixed cluster (vSphere 4.0 U2 & 5.0 U1 Hosts) with activated automatic DRS.

  NB.  I found that 1.5 vCloud Director boasts a version of VM HW (v7 or v8) framework that is useful for mixed clusters. I hope that vSphere itself may have a similar setting.

  Yes, it is certainly possible. Simply select "Custom" in the "New VM" Wizard and you will be able to decide which version HW (7 or 8) you want to use for this virtual machine.

  André

• Error during the deployment of Composite using BPEL2.0

  Getting error while deploying the server when I use the Java Embedded below.

  Included in the jar file of the class of AssetMetadataMessage under "Oracle_SOA1/soa/modules/oracle.soa.ext_11.1.1" and checked "Manifest.MF" file too

  The same code with slight modifications associated with BPEL1.1 works well Pls shed some light.

  BPEL

  " < import importType = ' http://schemas.Oracle.com/BPEL/extension/Java "location="java.rmi.RemoteException"/ > "

  " < import importType = ' http://schemas.Oracle.com/BPEL/extension/Java "location="java.rmi.ServerException"/ > "

  " < import importType = ' http://schemas.Oracle.com/BPEL/extension/Java "location="java.util.Properties"/ > "

  " < import importType = ' http://schemas.Oracle.com/BPEL/extension/Java "location="javax.naming.Context"/ > "

  " < import importType = ' http://schemas.Oracle.com/BPEL/extension/Java "location="javax.naming.InitialContext"/ > "

  " < import importType = ' http://schemas.Oracle.com/BPEL/extension/Java "location="javax.naming.NamingException"/ > "

  < extensionActivity >

  < bpelx:exec name = "Java_Embedding1" language = "java" >

  <! [CDATA [/ * write your java code below for example]]

  System.out.println ("Hello, World");

  */

  try {}

  Properties props = new Properties ();

  String url = "rmi://xx.23.60.233";

  String port = '9555 ';

  Server String = "XXServer";

  props.setProperty (Context.INITIAL_CONTEXT_FACTORY,

  "com.sun.jndi.rmi.registry.RegistryContextFactory");

  props.setProperty (Context.PROVIDER_URL, url + ":" + port);

  InitialContext context = new InitialContext (props);

  XXInterface c = (XXInterface) context.lookup (server);

  ADI of string;

  Province of string;

  ProvID chain;

  Boolean provIS.

  String folderName;

  Boolean condition;

  ADI = (String) getVariableData ("ADIString");

  Prov = (String) getVariableData ("Provider");

  provID = (String) getVariableData ("ProviderID");

  provIS = (boolean) getVariableData ("ProviderIs");

  folderName = (String) getVariableData ("OriginalFolderName");

  ASM AssetMetadataMessage = new AssetMetadataMessage();

  asm.setMetadata (adi);

  asm.setProvider (Prov.);

  asm.setProviderID (provID);

  asm.setAdult (isAdult);

  asm.setSourceOriginalFolderName (folderName);

  Status = (Boolean) c.contentMetadataImport (ASM);

  setVariableData ("RMIStatus", status);

  } catch (ServerException is) {}

  TODO: Add catch code

  se.printStackTrace ();

  } catch (RemoteException re) {}

  TODO: Add catch code

  re.printStackTrace ();

  } catch (NamingException don't) {}

  TODO: Add catch code

  ne.printStackTrace ();

  }] >

  < / bpelx:exec >

  < / extensionActivity >

  Error:

  [17: 02:50] HTTP error code returned [500]

  [17: 02:50] Error Message from the server:

  There was a deployment of the composite on soa_server2 error: operation failed - Member(Id=2,_Timestamp=2014-03-21_15:31:37.059,_Address=XX.26.75.8:8090,_MachineId=8295,_Location=site:,machine:XX01,process:26746,_Role=WeblogicServer):Error occurred during the deployment of the component: XX_Adaptor to service engine: implementation.bpel, for composites: XX_Adaptor: ORABPEL-05250

  Suitcase BPEL deployment by mistake.

  Problem solved.

  The question is when we use to get getVariableData, this returns the type of java.lang.object in java, and when we attribute to boolean directly it gave error. So used to rectify below code

  Fix a

  Boolean ProvIs = Boolean.valueOf ((getVariableData ("ProviderIs")) m:System.NET.SocketAddress.ToString ());

  A bad

  Boolean ProvIs is getVariableData ("ProviderIs");.

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol

• ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  Hi all, I had a problem when using popup to create a new table row.

  I do like in this http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html

  but when I click on insert, an error stating:

  java.lang.NullpointerExeption

  ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  In other cases, when showing Popup, when I clicked on cancel (popup), the display of the error as above. I don't know why?

  Can someone explain to me why. Thank you

  Check your page links if the createInsert operation is present.

  Then check that the getBindings() method returns a value and not null.

  Timo

• Problems with drivers in Lite Touch Deployment (WinPE 6.2.9200, deploying 7 x 64 ENT)

  I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.

  When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.

  Try to resolve what I have:

  > Download the appropriate Windows 8 LAN driver from the manufacturer's website

  > Imported it out-of-box drivers in MDT

  > Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices

  > Updated the deployment share

  > Imported the updated boot image to WDS

  This could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?

  EDIT: See http://social.technet.microsoft.com/Forums/en-US/7562dfc5-ae02-40f0-b082-645a95b8fca3/problems-with-drivers-in-lite-touch-deployment-winpe-629200-deploying-7-x64-ent?forum=mdt

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?