Problem with NVidia GeForce 650GTX installation/update of drivers

I bought a VR Deepoon E2 helmet last week. Installed according to the instructions. Home screen don't watch in headset for installation appears to succeed. Tried to use it with the Steam VR DCS World Flight Sim game (which he has been quoted as being able to do), but nothing in the helmet. Disconnected leaves VR on PC and Steam steam. Headset is back to a blue room screen smoky (immersion 3D yet) with a message to reset the headset by pressing the A button on the device to hand.  While software Deepoon software Oculus Rift DK2, he was of course, using the Deepoon E2-based does not come with the hand units as the Rift of Oculus, so I could not use any button.

Active Web. Uninstalled and reinstalled as recommended (possibly 5 times). Always comes down on a blue color screen with the Message "A switch". Web checked and found Deepoon Assistant Software. This allowed me to spend DK1 DK2 and Deepoon, but any helmet showed was now a big Red Letter D on a gray background.

Checked the web once again, and he says that the only way was to uninstall a remove all traces of the Oculus and Deepoon from my PC, including my registry. I did it with great care, but think I may have missed and remove some registry keys which makes reference to my NVidia GeForce graphics card 650 GTX which could have are embedded in the Oculus/Deepoon records.  Now given up trying to get this working VR helmet (he had other problems as well as glitch shaped growing on the right lens and not perfectly update) and I'll send the item back for a full refund on EBay.

Having provided the measures so far, my current status is now worse.  I can't use my graphics card. In Device Manager, it shows an exclamation point, and the games that worked before will not now due to the "lack of DX11 compatible hardware. I tried the update drivers and then downloading the driver from Nvidia for my graphics card, and in both cases, the drivers will not install because there is no recognized the installed card. I tried uninstalling the driver and graphic card and then search for the new hardware in Device Manager. He finds that the GTX 650 but used to always install the driver concerned. I even thought of removing the card graphic, commissioning, remove all references from Nvidia in the registry, close, put my card back in and go upward as if it were to find the map for the first time, but I'm now concerned I will be myself deeper bury.

If someone could help me please with what I'm doing now, because I'm at a loss and without my games I'm even more depressed. I am running out of ideas and short to the shop that will probably charge me a fortune for a simple registry repair my computer, I don't know what else to do. I have a last file 'dxdiag' that if someone can help I can send it in by e-mail if you need for further investigation. It's my last option.

Hello

To get a better idea of your request, please provide us with the following information:

  • The version of the driver installed
  • The version of the driver you want to install
  • Device status (provide a screenshot)

I'll keep an eye out for your answer

Tags: Windows

Similar Questions

  • Problems with nvidia geforce 8600 m GT / drivers

    I have some problems with my nvidia geforce 8600 m GT on my Dell Vostro 1700.

    It seems that the drivers a few crash games, and I found that a lot of people have the same problem, but I can't get a soluction.

    I can also update my drivers (mine are 7.15.11.5669 4/10/07, Winsdows Vista Business): update on windows tools cannot find a newer driver and the ones I found on the nvidia site does not work (they give a message that say 'impossible to find adequate material for these drivers').

    Thank you for helping,

    Betray


  • Windows has detected a problem with NVIDIA GeForce 8800 M GTS. Code 43

    I was playing a computer game, when suddenly the game crashed. I restarted my computer to see that I can not play because my computer disabled my NVIDIA, saying only he reported code 43 problems.

    someone please help?

    Try to start in safe mode and selecting «last good...» »

    And since you have a portable computer have you updated the drivers (chipset & graphics) of your computer support site mobile phone manufacturers?

  • Problems with nvidia Geforce GT 525 M on Dell Inspiron N5110

    Hello

    I just bought a Dell Inspiron N5110 i5 2410M - 500 GB 4 GB GT525M Win7.

    I can not install graphics nvidia in my laptop .wen I install once installation is complete a system check is performed.

    He said 'NVIDIA INSTALLER cannot NOT CONTINUE' and this graphics driver cannot find compatible graphics hardware.

    Hello my dear,

    I had the same problem on this issue. I am from Cambodia.

    Are you sold yet? If you fixed it please help me. I'm still not sure.

  • Problems with aero after the latest updates

    Hello

    Someone had a problem with the latest Microsoft security updates
    touching the aero desktop theme.

    Since I downloaded the updates my aero as a theme stopped working.
    I did a roll windows back but I still have the same problems.

    The updates are #KB971029 and #KB971029 the
    updates have been downloaded on 03/17/11

    I hope someone can help with this problem.

    All the best

    Philip Davies

    Hello

    OK try to remove these updates to see if that helps. Sometimes manually
    install the updates one at a time will prevent topics such as this one (if the)
    mises_a_jour have been the question).

    Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

    Or

    Remove an update
    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    Or

    The problems with the removal of updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

    Or

    How to uninstall updates in Windows Vista
    http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

    Disable or hide optional updates on Windows Vista
    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

    AFTER removal of updates, do a system restore to before
    updates have been applied to the origin. Therefore, affect the total amount of
    updates are deleted.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    =======================================================

    If necessary:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ======================================================

    If necessary try a repair Installation which allows to keep the programs and data however
    redundant backups are always a good idea.

    You can use another DVD that aren't copy protected but you you need to own
    Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
    machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
    good backup or 3 (security in redundancy).

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    I hope this helps.

  • Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

    Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

    aarruunn, you might want to try Windows Installer Cleanup utility.

    http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

  • Problems with Vista start after the update of Norton.

    I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

    Hello, Heather,

    Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

    Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

    Norton Removal Tool

    https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

    Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

    The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

    Perform a clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

  • Oh no! There is a problem with your recent payment. Update the details of payment for uninterrupted service.

    Hello

    I get this message:


    Oh no! There is a problem with your recent payment. Update payment details for uninterrupted service.

    But I have no idea what the 'problem' and payment information are correct...

    What should I do? It seems impossible to contact any Adobe

    Hi liamg9149512,

    I see that the payment issue is now resolved with your account.

    Please let us know if there is anything else, we can help you.

  • Premiere Pro supports CUDA with NVIDIA GeForce GTX 980 Ti?

    Premiere Pro supports CUDA with NVIDIA GeForce GTX 980 Ti?

    Yes

  • Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

    Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

    jasonf18090788 wrote:

    I saw on the Adobe site that the video card is compatible with AE Pr, but not work.

    Where have you seen that? It is not on the list of the AE: system requirements | After Effects

    Keep in mind that After Effects uses only the GPU for one, outdated thing. GPU very little matter for AE. See this: features GPU (CUDA, OpenGL) After Effects CS6 and after effects CC

  • order of installation/update of drivers

    Hello

    What is the correct order of the installation/update of drivers for dell xps 15z?

    DellUser_AJ,

    If you have recently reinstalled the operating system, have you installed the Dell System Software (if applicable) and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

    Start with the Dell system software and the chipset drivers and follow the list.

    Rick

  • Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

    Original title: I use SFC. EXE

    Error detected

    How can I fix this, or I have to re - install window again.

    CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    The same with 0000015c detail above.

    00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

    00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
    2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

    Having a problem with the Update window for

    Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

    I followed the recommendation, that nothing has changed.

    Download size: 4.7 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

    Thank you

    Hello

    Problems with the Windows Sidebar?

    It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

    Follow these steps and check if it helps.

    Logon as administrator-

    a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

    b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

    c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

    CD C:\Program Files\Windows Sidebar
     
    d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

    Guest should be--> C:\Program Files\Windows Sidebar >

    e. then copy and paste each of them following their tour to enter

    regsvr32-u sbdrop.dll

    regsvr32-u wlsrvc.dll

    regsvr32 atl.dll

    regsvr32 sbdrop.dll

    regsvr32 wlsrvc.dll

    Sidebar should now work.

    Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

    Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

    As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

    For maore information, see: http://support.microsoft.com/kb/2416472

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Display Satellite 5100 adapter fails suddenly with NVIDIA GeForce

    I have a 5100 501 Satellite, which uses the NVIDIA GeForce 440 Go display adapter.

    Without changing the settings, the display has stopped working about two weeks ago. Other users have had the same problem (see http://www.geekstogo.com/forum/index.php?act=ST&f=5&t=49116), but no one has managed to explain or fix the problem. The best that we can do is to disable the driver, which means that the function of "hang" on the laptop is no longer works and leaves me with interference on the screen.

    One theory is that a Windows Update caused the problem. Does not work reinstall any number of drivers (including those recommended by NVIDIA and Toshiba).

    This is a problem very irritating... someone can help?

    MS

    Hello

    Well, check that you have downloaded the graphics driver on the right.
    Each Satellite 5100-xxx needs a different graphic driver.
    In addition, overheating can be a problem. If some high-performance tools (games) running on the device the parts (graphics card) produce a lot of heat. This can lead to freeze the screen. In his case the square around the unit should be free with it that fans could take a breath.

    Good bye

  • H8 - 1330 PC with NVIDIA GeForce GT 630 after windows log in the black window with the cursor of the mouse only has

    Hello

    PC is a h8 - 1330's, and the graphics card is a NVIDIA GeForce GT 630 with driver version 9.18.13.270 dated 29/08/13. connected to a TV through an HDMI cable samsung. It is running windows OS 8.1.

    I installed 1 conc TV tuner card but otherwise the system is HP standard configuration as it was shipped.

    I think that I had a disorder with the pc update as I turned it on and after reaching the windows log on screen and pc connection seems automatic Windows boot in windows and I see only a black screen with the mouse cursor. I can ctrl + alt + delete and check out the Task Manager, but not other windows will appear. I tried to change username, sign in with a different account and get the same question.

    I'm fighting to enter the safe mode or any other mode at startup to the top to see if I can roll back the video driver.

    I tried pressing ESC then f11 to make a restore without success.

    I can't enter the mode without fail to start via shift + f11 or f11.

    My father has the same PC and does not see this issue.

    I was wondering if anyone has any suggestions of things I can try?

    hoping to try a software patch before trying the different video cards/monitors to isolate the problem.

    see you soon,

    Andrew

    Thank you for the additional information.

    Try this to see if it helps:

    To restore your PC to an earlier point in time

    1. Enter in the right edge of the screen and then click on search.
      (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)

    2. Enter the control panel in the start search box and press or click on Control Panel.

    3. Enter the collection in the control panel search box, and then tap or click recovery.

    4. Press or click Open System Restore, and then follow the instructions.

    Follow these instructions carefully to see if they will help you.

  • Fuzzy screen, large desktop icons, funny colours something to do with NVIDIA GeForce 8300?

    One day last week when my computer loaded the color came all blurry on the screen and the desktop icons are also very big. I am running Windows Vista and I have an e-machine E4264. I tried to go into the settings and change the resolution, etc. for the screen, such as recommended, but it makes no difference. I also did a re-store to a point when the computer worked well, which was also recommended. I ran a diagnostic thing and and the following things came.

    Problems encountered:

    * NVIDIA GeForce 8300 GS does not work properly

    Windows has detected a problem with the NVIDIA GeForce 8300 GS

    * Hardware changes have not been detected.

    What is this problem and how can I solve it? Someone talk about form PC World to make a re - store throughout the system and try to reinstall windows again so it goes back to the original way it was when it was purchased.

    I've been on the NVIDIA site and have installed the new version of the driver he recommended, but it has not worked. The screen has been like this for about 4 days now. Sometimes, when I load the computer is good, but most of the day I can't use it because of this problem.

    Can anyone please help me or give me advice on this problem?

    If updating the drivers did not work then the video card is probably a failure. The next step in troubleshooting is to uninstall, shut down the computer, install a known-working video card, install its drivers and see if things are getting better. If they are, the original video card must be replaced.

    On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

    MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for