Problem with script OnConnect Portal WEBVPN AnyConnect

Similar Questions

• Problem with script on the master page

  So I have my build script of the unique number bit that I have posted here before... it's on the Initialize event of the field.

  
  

  If (this.rawValue == null) {}
  var d = new Date();
  this.rawValue = parseInt(d / 1000);
  }
  else {}
  this.rawValue = rawValue;
  }

  Which works very well if on the body of the form, but if I put it on the master page it re - initializes (and changes the number) whenever a subform gets shown/hidden. No idea how to stop it from doing this? I tried it on a few other events without a bit of luck.

  I came across another problem with this script, a field called 'Date' was interfering with the script - throw an error "the Date is not a constructor. Is - this normal (function/field collision)?

  Hi Jono,

  I had problems with script within the Master pages before. What I've done in the past, it is a textfield hidden in the main pages of script with overall binding (which featured many here today); then same name textfield in the master page picks it up.

  Good luck

  N.

  Post edited by: Niall O'Donovan

• Problem with "Scripts" to convert the NEF to JPG

  Hello

  I'm trying to batch naves convert to jpg using file > Scripts > processor of images, what I did before, but when I click on select file to select files NAVE of the memory card, Photoshop does not recognize the NEF files.

  Photoshop is grateful the NEF files in the case opposite and if I click on "Save as" and save it as a JPG file, it works, but it's a lot of work to save more than 500 images...

  Any suggestions?

  Thank you!

  There are also some problems with photo, download maps of the camera. I would like to move the files to your computer to convert their use you BONES to move them.

• Problem with Script using New() to create a #Vectorshape

  Hello

  I'm having a problem with a movie in a movie script, I build and I can't understand why.

  The unique film script, developed by JC in 2004, is reproduced below. It works perfectly in a film in itself. But I need to integrate it into a sequence exists in which the other sprites and behaviour must co-exist.

  The problem I see is that George is created with the new command (can be seen in the message using window put George), but it won't allow attachment of gMem.regPoint, gMem.centerRegPointand so on. These errors any return.

  I would also be open to another solution to the problem. What I have to do is to create rectangles which represent a plan view of a roof on an underlying grid and then be able to slide and place other images on it (it's not a game for training purposes).

  I use MX2004 on a PC. Any help, greatly appreciated.

  Rod Wolford

  ------------------------------------------------------------------------------------------ --

  George overall, gCount, gNum, gLoc, gCreateVert, gMemNum

  on prepareMovie
  clearGlobals()
  _movie.puppetTempo (60)
  gCreateVert = False
  gMemNum = 5
  end

  on mouseDown
  If not (gCreateVert) then
  George = new (#vectorShape, Member gMemNum of castLib 1)
  gMemNum = gMemNum + 1
  gMem.regPoint = point (0,0)
  gMem.centerRegPoint = False
  gMem.closed = False
  gMem.antialias = True
  gMem.strokeWidth = 0.25
  gMem.strokeColor = rgb (0,0,0)
  gNum = getFreeChannel()
  channel (gNum) .makeScriptedSprite (George, point (0,0))
  Sprite (gNum) .encre = 36
  gCount = 0
  gCreateVert = True
  end if
  
  If gCreateVert then
  
  If the doubleClick may
  gCreateVert = False
  gCount = gCount - 1
  gMem.deleteVertex (gCount)
  gMem.closed = True
  gMem.fillMode = #solid
  gMem.fillColor = rgb (random (256) - 1, random (256) - 1, random (256) - 1)
  gFinished = True
  output
  end if
  
  gCount = gCount + 1
  gMem.addVertex (gCount, the mouseLoc)
  
  gCount = gCount + 1
  gMem.addVertex (gCount, the mouseLoc)
  gLoc = the mouseLoc
  
  end if
  
  end

  on enterFrame
  
  If gCreateVert then
  
  gMem.moveVertex (gCount, the mouseH - gLoc [1], the mouseV - gLoc [2])
  theLoc = (gMem.vertexList) [gCount] [1]
  
  If not (theLoc = the mouseLoc) then
  gMem.moveVertex (gCount, the mouseH - theLoc [1], the mouseV - theLoc [2])
  end if
  
  gLoc = the mouseLoc
  
  end if
  end

  on stopMovie
  theCount = castLib (1).member.count
  Repeat with i = 1 to theCount
  If the Member (i) game = #vectorShape then member (i) .erase)
  end repeat
  end

  on getFreeChannel
  
  Repeat with i = 1 to the lastChannel
  If sprite (i).member.type = #empty then
  aNum = i
  output of repetition
  end if
  end repeat
  
  return aNum
  
  end

  While I have not read any of your script, try to replace

  George = new (#vectorShape, Member gMemNum of castLib 1)

  with

  George = _movie.newMember (#vectorShape, Member gMemNum of castLib 1)

  It is possible that the film you want to integrate that into a script #movie with a #new Manager, who must have been typed as a script #parent

• Problem with script downloading

  Hello

  I have a problem with the download of the Flash Player on my XP computer Internet Explorer.

  All the time I get the message indicating that a problem has occurred with the script on this page. I tried several times and at the end of the download procedure, this happens all the time. I activated the script and it worked for all the years up to now. Here you can see the message I get (in Swedish):

  

  Is there someone who can give me an advice on how to get Flash Player?

  Hello

  Welcome to the Adobe Forums.

  You can download the links on this document, offline Installer Adobe Flash Player:

  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

  Thank you

  Vikram

• Problem with script Bay in Illustrator CC (2015.3)

  Bay script missing in Windows / Extensions.

  I think that the problems of updating

  

  Rental discuss the issue with the developers of the Bay of Script. Please also note that CC 2015.3 is installed in a separate folder, you may need to copy extention inside this new folder to make it work.

• the cell's overflow to find table - problem with script

  Hello

  as a translation company, we often do some DTP on Framemaker documents. Documents often contain many tables and the translated text will always enters the cells, giving overflow. I'm looking by creating a script that detects the overflow in the table cells.

  I already tested a few scripts and met today with a problem that I can't find. I started detecting overflow from the cells in a selected table, that works very well and gives an alert when an overflow is detected. This script:

  // == WORKS ON SELECTED TABLE ==
  var doc = app.ActiveDoc;  
  var tbl = doc.SelectedTbl;  
  var row = tbl.FirstRowInTbl;  
  var cell;  
    
  while (row.ObjectValid () === 1) {  
      cell = row.FirstCellInRow;  
      while (cell.ObjectValid () === 1)  {  
       if (cell.Overflowed === 1) {  
    alert("cell overflow Will Robinson!");
    }
          cell = cell.NextCellInRow;  
      }  
      row = row.NextRowInTbl;  
  }  
  // == END OF WORKS ON SELECTED TABLE ==
  

  However, I thought it would be nice to browse tables in a document and find all the cells of overflows, instead of going to table by table. If this script runs successfully in tables, lines and cells in a document:

  // === LOOPS THROUGH TABLE, NO OVERFLOW ===
  var doc = app.ActiveDoc;
  var tbl = app.ActiveDoc.FirstTblInDoc;
  var row = tbl.FirstRowInTbl;
  var cell;
  
  
  while (tbl.ObjectValid()) {
    alert ("gimme a table");
    while (row.ObjectValid () === 1) {
    cell = row.FirstCellInRow;  
    while (cell.ObjectValid () === 1)  {  
    alert("gimme a cell");
    cell = cell.NextCellInRow;
    }
    row = row.NextRowInTbl;
    }
  tbl = tbl.NextTblInDoc;  
  }    
  // === END OF LOOPS THROUGH TABLE, NO OVERFLOW ===
  

  When I add the block

      while (cell.ObjectValid () === 1)  {  
       if (cell.Overflowed === 1) {  
    alert("cell overflow Will Robinson!");
  

  in this script, it does not work. According to the cell. Overwhelmed A requires the table to be selected? Does anyone know how to get around this problem - by selecting the table if the object is valid before performing a loop on the lines, or by the detection cell. A swamped in the above script?

  I also - why not :) - I tried overflow under the doc.flow rather than FirstTbl, but although it detects flowes/frameworks and subcol correctly, it is not always register the overflow.

  var doc = app.ActiveDoc
  var flow = doc.FirstFlowInDoc
  var frame = flow.FirstTextFrameInFlow
  var subcol =frame.FirstSubCol
  
  while (flow.ObjectValid()){        
              while (frame.ObjectValid()) {               
                      while (subcol.ObjectValid()){
                          if (subcol.OverFlowed === 1){
                          alert("colsies"); //doesn't work!
                          }
                          subcol = subcol.NextSubCol
                          }
                  frame = frame.NextTextFrameInFlow
                  }
              flow = flow.NextFlowInDoc
     }
  

  I'm clearly missing something, but I can't know what? Any help would be greatly appreciated...

  Kind regards

  Geert

  Your code in the second script isn't quite right. Try this:

  var doc, tbl, row, cell;
  
  doc = app.ActiveDoc;
  tbl = doc.FirstTblInDoc;
  while (tbl.ObjectValid ()) {
      row = tbl.FirstRowInTbl;
      while (row.ObjectValid ()) {
          cell = row.FirstCellInRow;
          while (cell.ObjectValid ()) {
              if (cell.Overflowed === 1) {
                  alert ("Cell overflowed");
              }
              cell = cell.NextCellInRow;
          }
          row = row.NextRowInTbl;
      }
      tbl = tbl.NextTblInDoc;
  }
  

• Problem with script to clone virtual machines

  Hello

  I created a script to clone virtual machines on a regular basis around a method posted by LucD and Simon Long here or on their blogs.

  Here is the part that does the actual work:

  $VM = get - VM $Machine.MasterVM
  # Send Email of departure
  .\startmail.ps1
  # Create new snapshot clone
  $CloneSnap = $VM | New-Snapshot - name "Instant Test" - Quiesce
  # Get the managed object display
  $VmView = $VM | Get-View
  # Get the managed folder object reference
  $CloneFolder = $VmView.parent
  # Construction specification clone
  $CloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec
  $CloneSpec.Snapshot = $VmView.Snapshot.CurrentSnapshot
  # Make the linked disc specification
  $CloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec
  $CloneSpec.Location.Datastore = (get-Datastore-name $Machine.BackupDS). Extensiondata.MoRef
  $CloneSpec.Location.Host = (get-vmhost-name $Machine.BackupHost). Extensiondata.MoRef
  $CloneSpec.Location.Transform = [Vmware.Vim.VirtualMachineRelocateTransformation]: sparse
  $CloneName = "$vm - BU - $date"
  # Create clone
  $vmView.CloneVM ($cloneFolder, $cloneName, $cloneSpec)
  # Write newly created VM to stdout as confirmation
  Get - VM $CloneName
  # Remove snapshot created for clone
  $Snap = get-Snapshot - VM (VM-Get-name $Machine.MasterVM)-name $CloneSnap | Remove-Snapshot - confirm: $False
  #Send full email
  .\endmail.ps1

  I want to use in an environment composed of 3 servers ESXi 4.0 with a local data store each. This works well in my test environment, but not in that productive.

  Here, I get this error:

  Exception, calling 'CloneVM' with '3' or the arguments: "it was not correct to specified parameters.
  Spec.Location.pool ".
  C:\script\vm-backup\backup.ps1:98 char: 18
  + $vmView.CloneVM < < < < ($cloneFolder, $cloneName, $cloneSpec)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  In a comment on his blog, made Simon refers to an error in the data store, but it seems very well here.

  By comparing the values of the characteristics to those of my testbed everything looks good, too.

  Does anyone of you can tell me where to look for the problem?

  Thanks in advance

  Christian

  That's correct, 1 by Server default resource pool.

  You can do

  Get-ResourcePool-name resources-site (Get - VMHost - name MyEsx)

  to get the default pool for a specific ESX Server

  CAB, you add a line in your original script

  $CloneSpec.Location.Pool = (get-ResourcePool-name resources-site (Get - VMHost - name MyEsx)). Extensiondata.MoRef

  This should be the correct MoRef

  The message seems to indicate that the target VM already partially exist.

  Remove it before you run your script once again.

• Smart title case - problem with script

  Having a problem here.

  When multiple paragraphs are selected the start of a paragraph has a tiny

  How can I fix?

  //DESCRIPTION: Converts selected text to title case smartly
  
  
  var ignoreWords = ["a", "an", "and", "the", "to", "with", "in", "on", "as", "of", "or", "at", "into", "that",
           "by", "from", "their", "then", "for", "are", "not","cannot", "be", "is", "which", "can"];
  var intCaps = ["PineRidge","InDesign","NJ","UMC", "FCCLA", "SkillsUSA", "d’Oeuvres", "VAT", "VIES",];
  
  // or by creating text files named ignoreWords.txt and intCaps.txt in the same folder as the script
  
  ignoreWords = getIgnoreFile(ignoreWords);
  intCaps = getIntCaps(intCaps);
  
  try {
      myText = app.selection[0].texts[0].contents;
  } catch(e) {
      exit();
  }
  
  theWordRanges = myText.split("/");
  for (var i = theWordRanges.length - 1; i >= 0; i--) {
      theWords = theWordRanges[i].toLowerCase().split(" ");
  
      //First word must have a cap, but might have an internal cap
  
      myNewText = "";
      for (var j = 0; theWords.length > j; j++) {
          k = isIn(intCaps,theWords[j])
          if (k > -1) {
              myNewText = myNewText + intCaps[k] + " ";
              continue;
          } else {
              if ((isIn(ignoreWords,theWords[j]) > -1) && (j != 0)) {
                  myNewText = myNewText + theWords[j] + " ";
              } else {
                  myNewText = myNewText + InitCap(theWords[j]) + " ";
              }
          }
      }
      theWordRanges[i] = myNewText.substring(0,myNewText.length - 1)
  }
  app.selection[0].texts[0].contents = theWordRanges.join("/");
  
  // +++++++ Functions Start Here +++++++++++++++++++++++
  
  function getIgnoreFile(theWords) {
      var myFile = File(File(getScriptPath()).parent.fsName + "/ignoreWords.txt");
      if (!myFile.exists) { return theWords }
      // File exists, so use it instead
      myFile.open("r");
      var importedWords = myFile.read();
      myFile.close();
      return importedWords.split("\n"); // Could filter these, but what's the point?
  }
  
  function getIntCaps(theWords) {
      var myFile = File(File(getScriptPath()).parent.fsName + "/intCaps.txt");
      if (!myFile.exists) { return theWords }
      // File exists, so use it instead
      myFile.open("r");
      var importedWords = myFile.read();
      myFile.close();
      return importedWords.split("\n"); // Could filter these, but what's the point?
  }
  
  function getScriptPath() {
      // This function returns the path to the active script, even when running ESTK
      try { 
          return app.activeScript; 
      } catch(e) { 
          return e.fileName; 
      }
  }
  
  function isIn(aList,aWord) {
      for (var i = 0; aList.length > i; i++) {
          if (aList[i].toLowerCase() == aWord) {
              return i;
          }
      }
      return -1;
  }
  
  function InitCap(aWord) {
      if (aWord.length == 1) {
          return (aWord.toUpperCase());
      }
      return (aWord.substr(0,1).toUpperCase() + aWord.substring(1,aWord.length))
  }
  

  Hello

  Looks like it is a problem of "paragraph mark" which can be considered as 1 char in some channels.

  change these two lines:

  ...

  theWordRanges = myText.split ("\r");

  ...

  App.Selection [0] .texts [0] .silence = theWordRanges.join("\r");

  ...

  Jarek

• Problem with script of presence visible/hidden

  This is my first post on this forum. I tried to figure this out on my own, but no solution.

  I created a PDF with LiveCycle Designer ES 8.2 v. and trying to drop-down list and a list of drop-down list display state if U.S. is selected province if the Canada is selected using an 'if, ElseIf' statement.

  My screen opens with the two drop-down lists, hidden and I want to show a list of selection only if the United States or the Canada is chosen.

  Here is my script for when the country is selected in the drop-down list. Can someone understand what is happening?  Drop-down list field names:

  cboCo_Name_Country

  cboCo_Name_State

  cboCo_Name_ProvinceI

  PROBLEM: any country I choose, it always go to the final else statement, where the two are hidden. I know because in troubleshooting, I did initially visible drop-down and any country, I chose, both fields have become hidden.

   form1.sf_Page_1.sf_CompInfo.sf_CustAddress.cboCo_Name_Country::change - (JavaScript, client)
  // Change the presence attribute of the state and province fields. 
  if (this.rawValue == "United States") {                    // If country selected is US,  
      cboCo_Name_State.presence = "visible";          // show US States field,    
      cboCo_Name_Province.presence = "hidden";     // and hide Provinces field.  
      
  }
  else if (this.rawValue == "Canada") {                        // If country selected is Canada,
      cboCo_Name_Province.presence = "visible";        // show Provinces field,
      cboCo_Name_State.presence = "hidden";            // and hide US States field.
      
  }
  else {                                                                      // Otherwise, if any other country is selected   
      cboCo_Name_State.presence = "hidden";              // hide US States field,
      cboCo_Name_Province.presence = "hidden";          // and hide Provinces field.  
      
  }
  
  

  Any help is appreciated.

  I found the problem. The rawValues had to be USA and CA and not 'United States' and 'Canada '. I found it on the connection tab.

• Problem with script for the font change

  Hey guys,.

  You have a problem here and it has completely baffled me.

  I have two scripts;

  Change the list of fonts of Arial roasts in the entire document,
  And the other to do exactly the same thing in the paragraph styles.

  One that modifies the document works very well, one that runs through paragraph styles does not work. It simply changes all fonts that never entered last in the script.

  I downloaded a zip container file:

  1: arial fonts

  2: Rotis Fonts

  3 inDesign Document with paragraph Styles

  4: two JavaScript scripts to change fonts

  Zip file location: http://www.sbdigitalservices.com/transfers/ScriptProblem.zip

  Any help would be appreciated more that I tried to solve this problem for a few days with no joy!

  LittleMookie

  [Jongware] wrote:

  It should be

  If (app.activeDocument.paragraphStyles.appliedFont == app.fonts.item ("Rotis Semi Light Sans\t45")

  app.activeDocument.paragraphStyles [i] .appliedFont = app.fonts.item("Arial\tNarrow");

  In fact, the [i] has been replaced by the sign...

  It should be:

  app.activeDocument.paragraphStyles[i].appliedFont == app.fonts.item("Rotis Semi Sans\t45 Light")
  

  I would have written it totally differently (it interacts with InDesign much much less!):

  var doc = app.activeDocument;
  //var paraStyles = doc.paragraphStyles;// you don't want to do this if there's a chance of style groups...
  var paraStyles = doc.allParagraphStyles;// You want this instead!
  var fonts=app.fonts;
  
  for (var i=2; i		   

• launchctl problems with script

  MacBook pro running El Capitan.

  I'm new to all this and have used crontab successfully, but am trying to future proof the system using launchd.

  I'm trying to get a cron process works according to the recent instead of crontab launchd process to collect my tvguide from one day to the next.

  I have this script executable:

  osascript-e ' tell app "system events" to display the dialog box "Starting tvguide.sh.

  tv_grab_uk_atlas - days 7 - output /Volumes/Media/VBoxRecordings/tvguide.xml

  osascript-e ' tell app "system events" to display the dialog box "end tvguide.sh"

  Who runs correctly when called through the terminal:

  /Volumes/media/VBoxRecordings/TVGuide.sh

  or avec./tvguide.sh

  When in the right directory.

  The script gives a pop window to show that it is working.  I have to click the OK button and then he collects guides (30 minutes) and records them in the .xml file and then gives a pop up window when it's finished to tell me it's done.  Yet once I click OK to close and put an end to the sequence.

  I wrote a list of properties file and inserted in ~/Library/LaunchAgents as follows:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > tag < / key >

  < string > com.gjj.tvguide < / string >

  < key > ProgramArguments < / key >

  < table >

  < string > /Volumes/Media/VBoxRecordings/tvguide.sh < / string >

  < / array >

  < key > StartCalendarInterval < / key >

  < dict >

  < key > time < / key >

  < integer > 3 < / integer >

  < key > Minute < / key >

  < number > 0 Integer < / integer >

  < / dict >

  < / dict >

  < / plist >

  Who should call tvguide.sh every night at 3:00 and follow the same process.  Here is where the trouble begins.

  I check that the process is not loaded with

  
  

  The launchctl list $ | grep gjj

  and unresponsive.  Fine.

  I load it with

  
  

  ~/Library/LaunchAgents/com.GJJ.TVGuide.plist load launchctl

  
  

  and then run

  
  

  The launchctl list $ | grep gjj

  and get the response

  
  

  -0 com.gjj.tvguide

  Once again very well.  No PID, no error and the found file is loaded and ready to run.

  I have replace the StartCalendarInterval command and forced to invoke the process with

  $ launchctl start com.gjj.tvguide

  and nothing happens.  I run

  
  

  The launchctl list $ | grep gjj

  and now I get

  -com.gjj.tvguide 1

  So no PID, it is not executed, but there is now an error 1 (without explanation).

  I unload, reload and try again.  The same result.

  I return to the terminal and run the script as before and it works.

  If I reduce the script in the first line only force them to start the process it works and I get the dialog box and click OK button.

  Why the script does not work when I ask him to run the collection guide via the plist file?

  There are balls that I can see to see what is happening?

  Any help welcome!

  Geoff

  AppleScripts must run in the field "bootstrap" GUI. Try to add the "LimitLoadToSessionType" string value key to the plist with the value 'Aqua '.

• Captivate 5: problems with Scripts Java - try to jump to a certain slides on different projects

  I have the code here I did searches for Captivate 5 access certain slide in a different project, this code has attempted to use in projects separately and simultaneously:

  function GetSlideParam() {}
  If (Window.Location.href.IndexOf('?) Slide =')! = -1) {}
  startIndex var = window.location.href.indexOf ('? = slide') + 7;
  var URL = window.location.href.toString ();
  var slideNumber = URL.substring (startIndex);
  
  If (slideNumber! = "| slideNumber! = undefined) {}
  setTimeout (function () {NavigateToSlide (slideNumber)}; 200);
  }

  }
  }

  function NavigateToSlide (requestedSlide) {}
  cpObj = document var. Captivate;
  cpObj.cpEISetValue ('cpCmndGotoSlide', requestedSlide - 1);
  cpObj.cpEISetValue('rdcmndResume',1);
  }

  GetSlideParam();

  Here is my file of URL success on in the properties of the button that was required to access some slides according to my research:

  (my project to move to) .htm? slide = 2

  Ultimately, he did not and just jump to slide 1 on the other project, no matter what I tried to do it or how I modified the script and properties button and drag the project... Help, please... Just thought that maybe you guys would know some scripts, it's why I ask you guys that no matter whether it's a Captivate because specialists Captivate couldn't answer my question being clueless on the script of this part.

  There is no 'secret code '. All is in your NavigateToSlide service management, and apply some logic. (The Javascript logic, to be precise.)

  The class variable is of type "string" , and I am 100% sure of this because you use the function 'substring' to create his argument. I know that because "substring" will always return a string, even when you give him a Boolean or integer (in these cases, it will return an empty string, but it is always a string - a little as the number 0 may represent "nothing at all", but it is always a number).

  Look in the NaviatgeToSLide function. What happens when you subtract 1 from one channel? ... UH. It depends on the language, really. Most of the languages report it as an error, but Javascript does not work (for a variety of reasons - if this bothers you, use Google to find out why).

  Now, assuming that the variable 'requestedSlide' contains a valid slide number and it is stored as a string, how you converting cela a real number? Using a pretty basic Javascript function, in fact:

  cpObj.cpEISetValue('cpCmndGotoSlide',parseInt(requestedSlide) - 1);
  

  Needless to say that I'm not 100% sure that this will fix the problem, because I can not test your code using InDesign.

• Possible problem with script

  If anyone can help...
  
  When I run this statement in SQLdeveloper I return 400 000 lines:
  
  Select fname, sname, personid in tblperson_lpart where workcatid = 3 or workcatid = 2;
  
  However when I run the following script, I get the results online (after the script)... whats going on?
  
  =================================================================================================================
  TERMOUT OFF SET
  SET TRACEONLY AUTOTRACE
  
  
  F:/test_partition_wc2andwc3_standard.txt COIL
  
  Calendar START timer4
  Select fname, sname, personid in tblperson_lpart where workcatid = 3 or workcatid = 2;
  Schedule STOP timer4
  
  SET TERMOUT ON
  SET OFF AUTOTRACE
  SPOOL off
  
  =====================================================================================================================
  
  no selected line
  
  
  Execution plan
  ----------------------------------------------------------
  
  --------------------------------------------------------------------------------
  ---------
  
  | ID | Operation | Name | Lines | Bytes | Cost | Pstart
  | Pstop |
  
  --------------------------------------------------------------------------------
  ---------
  
  | 0 | SELECT STATEMENT | 1. 54. 886.
  | |
  
  | 1. PARTITION LIST INLIST | 1. 54. 886. KEY (I)
  | KEY (I) |
  
  | 2. TABLE ACCESS FULL | TBLPERSON_LPART | 1. 54. 886. KEY (I)
  | KEY (I) |
  
  --------------------------------------------------------------------------------
  ---------
  
  
  Note
  -----
  -"PLAN_TABLE' is old version
  
  
  Statistics
  ----------------------------------------------------------
  0 recursive calls
  0 db block Gets
  11986 consistent gets
  0 physical reads
  Redo 198444 size
  394 bytes sent via SQL * Net to client
  405 bytes received via SQL * Net from client
  1 SQL * Net back and forth to and from the client
  0 sorts (memory)
  0 sorts (disk)
  0 rows processed
  
  calendar for: timer4
  Elapsed time: 00:00:00.09
  
  ====================================================================================================================

  Problem solved?

• Problem with script in widget Muse

  Hello, all pages will appear at the top #u5501.size_fluid_width_height iframe {position: absolute; left: 0; top: 0 ;}} ???

  See line 59 and 60 of the source code

  <!--code HTML Widget - >
  	< style type =""text/css ">#u5501.size_fluid_width_height iframe {position: absolute; left: 0; top: 0 ;}}" < / style >

  on the staff of the site: http://www.Sejour-au-Vietnam.com

  site on Catalys: trip and stay in AsieAmo TravelAcueil

  Best regards, Serge Jullian

  jullians63645149 wrote:

  personal site: http://www.Sejour-au-Vietnam.com

  I get nothing at this address

  jullians63645149 wrote:

  the site of Catalys: trip and stay in AsieAmo TravelAcueil

  you did the wrong code...

  

  ... what you trying to do with the iframe?