Problem with spark scroll off the screen list

Similar Questions

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• Why my mouse pointer scrolls off the screen to the right

  Installed a wireless network adapter by using what I think was the wrong driver. Cannot remove properly. At the time my mouse and Window Media Player begins to act. The mouse pointer goes way off the screen to the right and no other borders. Window Media Player opens wider than my screen. That is what it is?

  Hello

  · What is the number and the model of the computer?

  · Have you installed the drivers on the manufacturer's Web site?

  · Do you receive an error message or error code when you try to uninstall the drivers?

  Use the back to roll on the computer that will replace the network to the previous state driver and check if the problem persists: how to use Roll Back Driver Windows XP: http://support.microsoft.com/kb/283657

  I suggest contacting the manufacturer and then install the wireless network card drivers.

• When I list all PROGRAMS menu START, I can't see the third column because it is off the screen. So, how can I scroll to the third column, no scroll bar is present.

  hen I list all PROGRAMS menu START, I see the third column, because it is off the screen. So, how can I scroll to the third column, no scroll bar is present.

  Hello

  You did it changes on your computer before this problem?

  You try to increase the resolution of the screen and check if the problem persists.

  For more information, see these links: to change your screen resolution

  Change the resolution of your monitor

  Hope the helps of information.
  Please post back and we do know.

• With windows 7, any display (Start button, label of the file on the toolbar) moved off the screen to the left and to the right there is a black margin. How to fix?

  If I reduce the resolution, all will be displayed but smaller. I would like to keep full resolution, but back off the screen to the right. It happened all of a sudden without any modification of the navigation by me.

  Fixed, maybe the symptoms. I changed the display size of 150 to 125% in control panel - display, and the situation rectified itself. Time will tell if the fix is robust. Thank you. d

• Videos YouTube are pushed off the screen to the right by an ad, how to fix?

  When I click on a link to a youtube video, the video appears for a few seconds in the correct location of the site, but then an ad square appears on the side left forcing the video screen to be pushed all the way to the right and off the screen. The video will be displayed on the right side of the column of the videos ' read popular. " Sometimes, a scroll bar appears at the bottom of the window, because the page is now much broader, which will allow me to scroll right to see the video, however, sometimes the scroll bar does not appear and I see only the left edge of the video.

  I reinstalled Adobe® Flash® Player, which did not help and I also have the latest version of Firefox. This began to happen quite recently... maybe a week, there is or not.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Program opens off the screen in a multiple monitor on Windows XP configuration

  Original title: I URGENTLY need help with an XP several problem of monitor!

  Our company has recently migrated to a new office and I got stuck with the displacement of all the computer systems to the new office. To make a long story short, one of our employees use four 4 monitors. After many difficulties, I finally got the monitors working as a horizontal screen with scrolling smoothly from left to right.

  However, I have a BIG problem. One of the programs of this employee uses disappears (flies off the screen right most) when maximized. I can bring it by moving to the right screen, but I can't understand how to do that a permanent solution. ANYONE - your help would be appreciated. Is it a matter of swapping the screens? It was rather difficult to get properly prepared screens because it did not meet the order, I tried. Anyway, these people are rare flowers and get bent out of shape, if the program opens on the designated window. Is there a way to specify which window it can open on whether it can be remedied at all times?

  Thanks in advance

  Hi Petrovsky9000,

  Have you tried disabling 3 additional screens and then by testing the application? If you need help of deactivation and activation of the monitors, you can use the following as a guide:
  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/monitors.mspx

  If you always lose the application when the window is maximized, try the following:

  1. With 1 active display, maximize the application.
  2. In the display properties window, set the resolution of the single screen for a step down from where it is now and apply the changes.
  3. Accept the new resolution, and now to see if your application is in the center of the screen.
  4. Now go ahead and set the resolution to what it was and and apply the changes.
  5. Make sure the application is always visible and maximized correctly. If so, go ahead and turn the other 3 views and see if everything works properly.
  Here are a few steps that solved the problem for my own systems in the past. I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Div too long, extends off the screen, h Tags does not

  Hello again, sorry to ask so little time for assistance, but for every single thing this forum helped me with I have learned a lot about the construction of the site, so I am appreciative of all your help so far anyway.

  The problem I am today is one that I don't remember having a problem with before.

  Link: are we building & Design Showcase

  On this page the content div has been set to a size to fit easily on your browser, however after adding a padding on the sides of it, it doesn't grow the content. Instead, he keeps pushing the content of the page, forcing users to use the scroll bar to see all this. I could just make the width of the div smaller, no?... Well... I also tried, and it seems that even if my div is smaller and can be adapted to the size of the width and padding on the screen, for some reason any padding adds twice the additional empty space and still shoot off the screen, I can't understand why it does.

  I also noticed that my h tags, < h1 > < h2 > < h3 > ect. has stopped working as well. What would be the best way to correct this?

  As always, all the solutions and suggestions are greatly appreciated.

  Width: 100% + padding-left and padding-right = more than 100%:

  . Body {}

  Width: 100%;

  height: auto;

  background-repeat: no-repeat;

  background-position: center;

  background-repeat: no-repeat;

  background-image: url (.. / images/DBBACK.png);

  Police: Arial, Helvetica, without serif.

  do-family: Arial, Helvetica, without serif.

  padding-left: 50px;

  padding-right: 50px;

  }

  'body' is not a Word, I would choose to use as a class for a

  .

  H1, h2, etc. problem:

  In the style.css file delete h1, h2, h3, h4, h5, h6 reset default:

  HTML, body, div, span, applet, object, iframe,

  H1, h2, h3, h4, h5, h6, p, blockquote, pre,

  a, abbr, acronym, address, big, cite, code,

  del, dfn, em, font, img, ins, kbd, q, s, samp,

  small, strike, strong, sub, sup, tt, var,

  DL, dt, dd, ol, ul, li,

  fieldset, form, label, legend,.

  table, caption, tbody, tfoot, thead, tr, th, td {}

  margin: 0;

  padding: 0;

  border: 0;

  outline: 0;

  Police-weight: inherit;

  font style: inherit;

  do-size: 100%;

  do-family: inherit;

  vertical-align: baseline;

  }

• Half top of the extensions manager made off the screen - how to do this back in view?

  I tried different approaches to solve this problem, but none helped. Some information from the environment:

  -Run OSX 10.9.1

  -use an external monitor

  • I tried to get the window to reposition themselves by disconnecting the external monitor - remains half-hidden on my laptop screen
  • I tried to play with the resolution of the screen, but he stubbornly refuses to budge
  • I also tried to turn the screen 90 degrees, but the extension manager is stuck with the upper part of the window off the screen

  Look forward to your suggested corrections.

  Thank you!

  For EM CS6, please delete "/Users/Library/Preferences/Adobe/Extension Manager CS6/exman_uiPreferences.xml. For EM CC, delete "/Users/Library/Preferences/Adobe/Extension Manager CC/exman_uiPreferences.xml.

  The "/Users/library" folder is hidden in the Finder. You must hold down the "option" key when you click on the 'Go' menu in the menu bar, then click on "Library" in the drop-down list.

• Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the screen. How can I stop this?

  Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the Web page. How can I stop this?

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• 6.6 keynote opens the window off the screen

  Since v6.6 Keynote opens a file off the screen on the first launch, I see the window at all.

  I have two monitors, a my MacBook Pro (mid-2012) and the other is a 15 inch USB monitor AOC. BTW and may be connected, the driver for this monitor causes the transformation to fail when it is attached.

  As I said, very good spear Keynote, but the file I want to work on is nowhere to be seen on my screen. When I hit CMD-CTRL-F (full screen), the presentation appears, and when I then hit ESC, I see the window right on the right edge of the laptop screen (see screenshot below), which allows me to put on the window and work on the file.

  Of course, it's heavy, if I have to do it every time I run the application Keynote. I searched here in this forum, but I have not found anything that could help me. Does anyone here know of a fix for this strange behavior?

  

  Since v6.6 Keynote opens a file off the screen on the first launch,

  Make sure you have the latest version of the speech which is 6.6.1

  the other is a 15 inch USB monitor AOC. BTW and may be connected, the driver for this monitor causes the transformation to fail when it is attached.

  These screens are very useful, but they are well known pose a problem with photographic, presentation and installation of applications on the Mac.

  If you can live with this poster failure very well, but if you want flawless performance, you need to use a display with HDMI, Thunderbolt, mini displayport or DVI of the Mac connection.

• After defragmentation, in Spider solitaire, game is off the screen

  Defragged my hard drive now, Spider Solitaire opens with just the square selector - the game is off the screen.  The only way I can access is to choose a level of play, and then reduce the taskbar, right-click on it and select 'mazimize '.  The Green game board appears and the game is played.  However, I can't reduce the size of the game at all.  Tried to reload, but could not find it on the CD-ROM of Microsoft XP all ideas anyone?

  Hello

  Try the methods:

  Method 1: Change the Display Mode

  a. right click on the Windows desktop and then click Properties.

  b. click on the settings tab and then click high color (16 bit) or true color in the color box.

  c. click OK to apply your changes and restart your computer.

  Method 2: Reduce hardware acceleration

  a. Click Start, point to settings and then click Control Panel.

  b. double-click System.

  c. click on the performance tab, and then click Graphics.

  (d) Note the position of the hardware acceleration slider. Move the position of a slider to the left to reduce the hardware acceleration, click OK and then click Close.

  e. restart your computer and test Spider Solitaire. If the problem is not resolved, repeat steps 1 through 5, move the hardware acceleration slider one more step left to what it is set to none.

• Windows Vista - stuck on logging off the screen

  I have this same problem with Vista Home Premium that others have had.  When I tried to shut down the computer laptop last night, he is stuck at logging off-page - with the active circle always renewable.  After 20 minutes or so I was tired so close by using the power button.  This morning when I turned on the laptop, he went to the same page of disconnection. 3 hours later, it's still there!  My technical knowledge is, to say the least, "limited."  I tried to open safe restart mode and pressing F8, as suggested on other threads, but which didn't work - I can not go beyond the logging off the screen. How can I solve this?

  I had the same problem... This method works.

  Turn on the computer and when the screen shows recovery Windows press the space key.

  You will be presented with 2 options - either to continue with system resume or to remove the Hibernation file and start with primer system - choose the second option - you're fixed!

• File copy/delete dialog box is off the screen in a staggered multiple follow Setup

  I'm on Windows 8 on a ThinkPad W520 with a 1920 x 1080 screen and a secondary antibody NEC LCD2070NX 1600 x 1200 display connected via DisplayPort. The NEC is positioned to the left of the ThinkPad and raised higher than the ThinkPad display; the bottom of the NEC is near the center of the left edge of the ThinkPad.

  I put to the top of the poster in the Panel to take account of this arrangement:

  http://mg.to/bugs/Windows/display-settings.PNG

  If I have a window of the Explorer of files open in the secondary monitor on the left and use this window to copy or remove some large files or folders, the progress dialog box is not visible. It is currently displayed in the "man no of land" above the main monitor and the secondary screen.

  The problem occurs when the secondary monitor is on the right, or above or below the primary. (I have tested some of these cases, but not completely). Also, this does not happen when the Explorer window is on the primary monitor. The problem does occur at all on Windows 7.

  Here's a film that illustrates the problem. For each image, I copied a large directory on the network and took a screenshot to display side by side and move the secondary display up to about 120 pixels in the control panel every time. You can see how the copy dialog box follows the secondary monitor vertically, but her left side is pinned to the left edge of the main screen, so he ends up disappearing from the screen.

  http://mg.to/bugs/Windows/multiple-display-bug.wmv

  It is easy to see what is happening here: Explorer normally centers the dialog box of progression on the same screen as the Explorer window that opened the dialog box. This does not work as expected in the direction, but on the axis X to the left edge of the dialog box's get pinned to the left edge of the main screen.

  As the corner at the top left of the primary monitor is always (0,0), it acts as if the dialog box was positioned like this pseudo-code:

  monitor = getWindowMonitor (feed)

  dialog.centerOnMonitor (monitor)

  If dialog.left< 0:="">

  Dialog.Left = 0

  When the dialog box is off the screen, it's a bit disturbing, because it makes the impression that the Explorer window is locked. The only way I know to make visible the dialog box is with this exercise of the superpowers of keyboard shortcut:

  1. use Alt + space to open the system menu of the dialog box. The menu will open on the screen no matter where is the dialog box.

  2. Press m to move (or click on move).

  3. you will see a four-headed mouse cursor, just to fool you into thinking the mouse could do something now. It will not!

  4 instead of this, you have to hit any key of the arrow, which begins the displacement of the dialog box.

  5. now you can use the mouse (or the puree on the arrow keys) to move the dialog on the screen.

  A bit of good news...

  I just tested this on the latest version of Windows preview 10 technical, and it seems to be fixed.

• Dialog box style off the screen

  While using InDesign full screen (3440 x 1440), the object style dialog box is on the top of the screen and cannot be dragged on because the title bar is also off the screen.  The dialog box cannot be resized (who usually move it), so I'm not sure how to make visible.  Restoration of the app is not help either - the dialog box is still mostly off the screen.  In addition, the Windows key + ShiftKey + left arrow (or one of the arrows by the way) does not affect the location of the upper part of the dialog box, passes just a screen that displays the dialog by mistake on.

  

  The operating system is Windows 10 on a Surface Pro 3 with a monitor LG Ultrawide.

  Thank you

  Richard

  Steve,

  I contacted Adobe support, and the winning solution was to detach the Surface Pro 3 and raise InDesign with only the single monitor of 2440 x 1440.  The object Style Options of windows then jump-up in a usable place.  When I brought the Tablet, reopened InDesign and brought to the top of the window, it was still where I left it on the tablet screen and I could drag it to a site that is usable on the external monitor.  Solved the problem, but I think that it a workaround solution.  No app should place a dialog box or the same window partially off the screen in the current context of monitor/Bangkok.  Looks like a tweek for InDesign, go ahead... ;-)

  Thank you

  Richard