Problem with the following link in the Search Page

Similar Questions

• Problem with the Search Page

  Hello

  I'm building a SearchPG. After you have created the VO object and view criteria I drag the view to the SearchPG criteria. When I run the search page I have two questions

  1 > I get 2 fields, i.e. If I search based on a work table and I created a variable binding to JobTitle (i.e. jobName) I see the JobTitle areas (from the select clause) and jobName (variable binding in the search box. I guess I should get only the jobName (bind variable) in the search box.

  2 > the bind variable is necessary. How can I do this as an option

  snaggy - paste pictures!

  Can someone help me with this.

  Thank you

  What creation Bind variable to use in ViewCriteria, uncheck the required box (in the tab dialog box Bind variable Variable) and tab control indications, make index screen to hide

• Problem with the search function

  I use firefox 10 and I have a problem with the search feature. If the word that I will try to find begins with the capital letter I can't find with control function if I write the word only with small letters. a the opposite. For example, if the word is 'Letter' I can't find this word if I type 'letter' in the search bar

  Is the option 'Option match case' in the verified search bar? If so, uncheck it.

  • See-> https://support.mozilla.org/en-US/kb/Searching+within+a+page

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I had a few problems with the search engines and history

  My default search warning back to Yahoo after a reset on my computer. Close Firefox keep one to change but by restarting the computer, it takes.

  I can't open the sidebar history. The option "view the history of your" opens its tab fine (the drop-down menu that says 'Show History Sidebar', 'clear recent history... ("ect.). But, when you click on the "Show History Sidebar", nothing comes. Can I use the "Show history" option, but the sidebar does not open for some reason any.

  I just finished with a complete analysis of the Microsoft Safety Scanner and it said not that there is anything wrong. I have not reset the computer again to see if something has changed although after the factory reset (see the 2nd paragraph) it seems returned to Yahoo (search engine he kept going to happen).

  I open the history tab in the menu of the toolbar, and everything seems fine here. I also had him always use private off all first browsing mode. After activating the option clear history when Firefox closes, I ended up having to reset to factory settings (things he saves were saved isn't really a problem) that doesn't seem to fix the problem with the sidebar of history not to come.

• Problem with the search for network path

  We have experienced a weird problem recently with our research. On a Windows 7 Machine, when you search for a file that is located on our file server, it will give you the files, but for ancient dates and not the most recent. In our case, when we find a file, I see the file is there but I do the search in the folder and it gives me no element matches your search if they have changed the 7/17 and later. Something before 7/17 is always available.

  I tried indexing, but I know that this will not work because it is a network location. Maybe is something that is wrong on the side of servers? This is a server of 2012. We have about 10 users affected by it, so the solution to the index of the network as a library location may not be enough and may just take us longer.

  Any ideas on if it's the workstation or the server? If so, what can be done to fix this? Any help is greatly appreciated!

  Thank you

  Andy

  Hi Andy,.

  The query is better suited in the TechNet forum, ask you to report the query in the following link to get the problem resolved.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Respond us if you have any technical questions and we will be happy to help you.

• problems with the search by using the CIS application.

  Hello
  
  We are able to connect to the server of Stellent of our J2EE application using our java code CIS.
  while performing research sometimes we get the error and sometimes it works fine (no change in the code)
  We use the socket to SCS connection type to connect via adapterconfig.xml
  Server details:
  
  CS: 10gR 3
  
  Please let me know the reason why he acts differently and on what basis we receive this error is also not known. :(
  
  ... On our J2EE server console, we get the following:
  
  2009-03-13 14:37:08, web-0 420, WARN (com.stellent.cis.server.api.scs.protoco
  l.impl.HDAProtocol) - could not find the end of header marker! ()
  2009-03-13 14:37:08, web-0 420, WARN (com.stellent.cis.server.api.scs.protoco
  l.impl.HDAProtocol) - did not read all the headers entry, attributing the type EXERCISE
  WN_TYPE
  
  -------------------------------------------------------
  Of the CommandException stack trace:
  
  com.stellent.cis.client.api.common.CreateAPIObjectException: error reading the answer of the content server: com.stellent.cis.server.filetransfer.SCSContentTransferStream: could not initialize class com.stellent.cis.client.api.scs.search.impl.SCSSearchResponse with the object of type com.stellent.cis.server.filetransfer.SCSContentTransferStream
  at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:62)
  at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
  at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
  at com.stellent.cis.client.api.scs.search.impl.SCSSearchAPI.search(SCSSearchAPI.java:92)
  at com.pg.emfg.ewps.stellent.service.impl.StellentDMSServiceImpl.searchString(StellentDMSServiceImpl.java:348)
  at jrun__search2ejspb._jspService(jrun__search2ejspb.java:124)
  at jrun.jsp.runtime.HttpJSPServlet.service(HttpJSPServlet.java:43)
  at jrun.jsp.JSPServlet.service(JSPServlet.java:106)
  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:241)
  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
  at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:348)
  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:451)
  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:294)
  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
  Caused by: com.stellent.cis.client.api.common.CreateAPIObjectException: error reading the answer of the content server: com.stellent.cis.server.filetransfer.SCSContentTransferStream: could not initialize class com.stellent.cis.client.api.scs.search.impl.SCSSearchResponse with the object of type com.stellent.cis.server.filetransfer.SCSContentTransferStream
  at com.stellent.cis.client.api.scs.impl.SCSObject.intialize(SCSObject.java:130)
  at com.stellent.cis.client.api.scs.impl.SCSServerBinder.intialize(SCSServerBinder.java:91)
  at com.stellent.cis.client.api.common.impl.CISAPIObjectFactory._initializeObject(CISAPIObjectFactory.java:250)
  at com.stellent.cis.client.api.common.impl.CISAPIObjectFactory.createObject(CISAPIObjectFactory.java:181)
  at com.stellent.cis.server.api.scs.impl.SCSCommand.prepareResponse(SCSCommand.java:300)
  at com.stellent.cis.server.api.scs.impl.SCSCommand.execute(SCSCommand.java:225)
  at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:57)
  ... 16 more
  
  Thanks in advance
  
  Prasad.V

  Hi Prasad,

  The above error is thrown when the socket with Content Server connection is terminated before that Content Server is able to send a full response. Most often, this occurs when the connectionTimeout for the CIS adapter is set to a shorter time than necessary for the Content Server service call ends.
  Note: The error message above also can be lifted during network downtime. Before proceeding with the solution below, you must make sure that there is no problem of network between the CIS Forum and the content server environment.

  -To implement the solution, please perform the following steps:
  1. open a browser and go to the page of information system Audit in the Content Server Administration section.

  2. in the Sections Tracing information section, select system, requestaudit, searchcache searchquery for the text box active Sections.

  3. make sure the Full Verbose Tracing above than the active Sections text box is checked.

  4. click the update button.

  5. at the top of the System Audit information page, click the link View Server output.

  6. on the page out of the server, click the clear button. Leave this window open.

  7. through the application of the CIS, submit the longest race of service or who causes the above error.

  8 return to the window of the browser in step 6, and then click the Refresh button.

  9 review the requestaudit tracing messages and find the service call that takes the most time. In most cases, this will be a GET_SEARCH_RESULTS call, other calls for service can also take some time. Below is an example of line tracing requestaudit showing a second service call 45.536.

  02.09 requestaudit 11:07:54.523 LONG_SEARCH_CUSTOM_SERVICE IdcServerThread-30944 [dUser = sysadmin] [QueryText = dDocTitle + % 3csubstring % 3F + % 60test % 60] [StatusMessage = success] 45.536 (dry)

  10 once the longest running service call is identified, add a reasonable buffer (e.g. 10-15 seconds) to take account of the additional load on the server. This amount of time of the call of service and the amount of memory buffer will be the value used for the connectionTimeout value.

  11. in the adapterconfig.xml, the node connectionTimeout for the CIS adapter to the value calculated in step 10. Please note that the value for the connectionTimeout configuration is specified in milliseconds. For example, if calling the function running longer, more buffer memory is about 60 seconds, then the value of connectionTimout can be assigned to 60000.

  12 restart the CIS Forum and the test.

  Hope this helps

  Thank you
  Srinath

• Someone else's problem with the Web page jump when hovering the links with long URLS in Firefox 4 beta 12?

  When I hover over a link with a URL that is longer than what corresponds to the length of the status bar in Firefox 4 beta 12, the entire page jumps back until I stop hovering over the link. It was so annoying (especially on Google search pages with lots of links, etc.) In fact, I uninstalled Firefox 4 Beta 12 and returned to the release of the Beta 11.

  Is there anything in all: config which would disable the status bar that the URL link seen in, at least?

  Download the extension of evar 4 status bar. It solves this problem and also provides many other options of the bar of the addon. Here is the link: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

• Problem with the landing page of the search results

  Hello. I have problems with my search results page that links correctly. I get the error that the page cannot be found.

  http://highestgood03.BusinessCatalyst.com/_blog/Highest_Good

  What I am doing wrong? Any help will be appreciated. Thank you!

  Hey there.

  You have /search - results.htm into action as the url of the page.

  It is in fact fair/search-results

  No extension file on the end.

  Delete this and your sorted

• Problems with the search function

  Hello!

  I have links to projectB projectA. When I open the projectA.chm the doesn´t of research show (topics) results of project b. (even with keywords in the index). Can I change this?

  Janine

  Hi Janine

  I noticed you said "projectA links for that project b. Does this mean that you do not have merge two projects? Note that simply create a link from one project to another does not cause a merger to occur. It simply allows to temporarily show the subject of the other project.

  If you merge, you insert a reference in your table of contents and a behiind the scenes file that sets things upwards so that the search and Index entries are now mixed that you are looking for.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Problem with the search service on a Windows Server 2012 R2

  Hi all

  I'm having problems setting up my newly installed Server vCenter server.

  Everything seems to be installed properly, at least I got no error message and I am able to connect to the Web Client vSphere.

  However, I can't create a data center as the inventory does not display any server...

  Weird, isn't it?

  When I try to access to the https://localhost:7444 / lookupservice page, a message tells me that the service is not available.

  Is there something else to do here?

  Something else weird to me, a beginner in VMWare environments, is that although I'm loging as administrator, it seems that I have not at all privilege. For example, for roles see, access to licenses and so on.

  How I setting a user administrator 'real '?

  Do you think that my problem might be this question of privilege? And that I do not see any server in the inventory because my administrator user does not have the appropriate rights to view it?

  
  

  
  

  Thanks in advance for any help you can provide.

  
  

  Kind regards

  
  

  Jeremy

  OK Guyz... My bad.

  Actually, I connect with the user local administrator instead of the user [email protected].

  Now everything seems fine.

  Sorry for the inconvenience! ;-)

  Jeremy

• Anyone having problems with the search of these forums?

  For some reason, I get 0 hits on even the most basic search terms when I'm looking for within the Captivate forum > all forums search box.  If I run the same conditions of Google search, I get a lot of hits in the forums.  Someone else?  What I'm missing here?

  The search function of the forum is currently broken.  Google will you get better results at the present time.

• Problem with the 'Welcome' page at startup

  I have a dell inspiron laptop loaded with vista home basic when I start you can of the "home page with the small circle of rotation and does not move this point - what I am doing wrong or wrong with the system."  I can turn off and then restart in safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• problem with the home page

  I'm going crazy with this. When I type the URL for my home page of the site that it is getting the error message

  Warning : require_once(cw3/CWLibrary/CWIncGlobalSettings.php) [function.require - once]: failed to open stream: no such file or directory in /home/content/s/t/a/starlake1/HTML/mccarthysigns/application.php online 29
  
  Fatal error : require_once() [of thefunction.require]: Failed opening required ' cw3/CWLibrary/CWIncGlobalSettings.php' (include_path ='.: / usr/local/php5/lib/php ') in /home/content/s/t/a/starlake1/HTML/mccarthysigns/application.php on line 29

  I see he's talking cartweaver but I did not install cartweaver to this site. When I type in the url to the other pages of the site they can be read without problem.

  Help, please.

  Thank you

  You can have AN index page at the root of the server at a time.  You must remove the unwanted (php). When you do, your index.html page will go up.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• problem with the search engines and in British Colombia

  Hello

  This is what google search when my Web site.  is hosted with BC and this area is listed on the sites that BC has given me. what I need to remove it from the list. If so, how is this done?  I can't have a declared site secured by google!

  Thanks for your response

  Is there a reason you need your home page to be sure? Just go to http://www.yourdomain.com instead of https://www.yourdomain.com?

  Perhaps provide a real link, then we can see what is happening?

• Navigation menus with drop downs-problem with the home page

  I have my site set up with a navigation menu that includes several items that have submenu items that appear on the overview. Is there a a way to make these pages unclickable, which means that users can choose only one of the submenu items?

  Hello TracyB1974,

  I think that you want the item in the submenu to show, but you don't want it to be clickable.

  If this is the case, you can try following:

  • Go to the plan view
  • Right click on the page you want to be clickable.
  • Select Menu > Include page without hyperlink

  

  This will create the menu item in a submenu, but she will not be linked to any page.

  Kind regards

  Vivek

• the 2 community site Admins: problem with the code page of Russian communities

  In all of the Russian community topics most read peoples '?' characters instead of Russian Cyrillic text. As I've seen and understand, the problem occurred when post more than a few days. Attachments, I have snapshots of: list of topics in my user profile, where Russian users can see normal Cyrillic text in all of the community of Russians. Then snapshots of several subjects in this list, where the Cyrillic text in the bodies of messages (but not in the topic) covered of '?' Characters.

  After that issue several times this summer, I thought I put a question to support. Selector question followed me for this

  Community and I hope that the community admins here will pay attention on that.

  Hello, this should now be resolved. Please do not hesitate to send me an email to cromero to the vmware.com website if you see more of that. The problem comes from our last update to 7 Jive and we manually check and this everyday pricing until we receive a software patch to Jive. Thanks for putting this to attention.

  Corey Romero

  VMware