problems of communication between the computer and printer (wireless)

Similar Questions

• No communication between the computer and the printer Photosmart D100 HD series

  Pentiun4 computer and HP Photosmart D110 seriesmy problem computer is HP but not accept the printer sends the signal to the printer. Thank you

  Hello

  1. what operating system is running on your computer?

  2. it worked earlier? If so, remember you have changed your computer?

  3. What is the exact error you receive?

  Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Problems sending data between the computer and the emulator.

  I can't send anything to the Calculator Emulator. Does not appear in the Send button calculator. In the emulator, it seems that send key as soon as I connect with the calculator and can send data to it. There is command of testicles that EU can do to make sure that a machine works, for example, the USB driver?

  In fact, including updates, firmware:

  application version: 20140702v6031

  operating system version: V 0.032.6030

  version of the program: 201472 (6031)

  most: the calculator, I received yesterday, day 1. and I doesn't seem to work well. There is a channel for guaranteed support, you can contact?

  Recognizing

  Davi

  Friends:

  Thank you very much. The problem has been resolved. As soon as I saw the kit, 3 updates were made and the machine works normally.

  Thank you

  Davi

• Encrypted L3 Communications between the TOWER and WLC?

  Hi all

  I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;

  1. I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
     1. The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
  2. EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?

  Strange but true - pointers will be greatly appreciated... Phil.C

  With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.

  For what is running the traffic through a VPN, it should work.  The issue I see with this is with the MTU in general.  The controller will drop all packets with a payload of less than 32bytes data.  According to the MTU over the VPN I've seen packets getting fragmented and it is a question.  If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.

• Disable communication between the host and the virtual machine

  I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

  is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

  Thank you.

  The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

  Thus, for example, if your VMX has a line that says:

  Ethernet0.VNET = "VMNet0.

  change to:

  Ethernet0.VNET = "VMNet2.

  (This assumes that you have not used the network Editor to fill the vmnet2 either).

• No communication between the primary and standby

  Hello
  
  I have configured the DG,
  
  primary-> testprod
  standby mode-> testprod_s
  I started, standby machine instance watch with testprod and its place...
  but there is no communication between the primary and standby...
  
  How can I ask/check communication?

  Heartbeat PING [ARC3]: Unable to connect to the day before "testprod_s". Error is 12514

  eve of post form

  status of $lsnrctl
  $lsnrctl services

  When oracle not registered with listener service, this kind of errors occurred.
  The value of register LOCAL_LISTENER & manually as below in sleep mode and post

  SQL > alter the registry system;

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• How to run code and to communicate between the computer and myRIO?

  Hello

  I am trying to create a colortracker using the myRIO. The system is pan tilt servo with a webcam. The project works well and is able to follow and move with the desired color. However, in order to continue the project, I want to ensure the system with another device for the perception of depth and want to use the host computer for webcam and image processing and the myrio to get signals for the servos. The idea is to connect two webcams directly to the computer usb ports and keep the myRIO connected to everything does time i.e. no wifi. Can anyone guide me as to how I would go about sending signals constantly between the computer host and myRIO?

  I advise to use Variables shared Network-Published or network stream.

  You can read about them both in the cRIO guide Developer: http://www.ni.com/pdf/products/us/fullcriodevguide.pdf

  There are also examples for both in the Finder for example LabVIEW.

• Problem with upgrade of the computer and activate Windows, he stated that "the failure of key you entered is already in use.

  Original title: problem with upgrading the computer and Windows activation

  I have improved my week to loast of computer of an Intel Core 2 Duo to an Intel Core 2 Quad processor.  Now Windows tells me I need to register my product.  When I tried to do, he said that "the failure of key you entered is already in use.  To activate Windows, you will need another product key Windows Vista Home Premium. "How can I get MIcrosoft to realize that I have not installed Windows on multiple computers. I just put my equipment?

  Hi Tkelleyaustin,

  I suggest to check the following items and check if the problem still persists.

   

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

   

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/activate-Windows-on-this-computer

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  I hope this helps.

• between my computer and router wireless connection (vista, premiem windows 7, 64 bit)

  Hey I recently had problems with my connection Wireless between my computer and the router.
  Normally off during the night is not connected to my router or on the internet the next day.

  I have been in close contact to my isp provider and have received a new router and reset my wireless Internet services provider site but I'm still having problems. I have also updated my drivers for my wireless on my laptop Hp G62 and have found that it will not cut when I do not shut down or sleep during the night.

  When you try to solve the problem, it will come back with "problem with the adapter or wireless access point and then asked to disconnect the power to the router. After doing this it will be fine all day.
  I do also to turn a blackberry 9000 "BOLD" and see first thing in the morning if the wireless is connected or not.

  ask for help, here is my last option I have been through everything and had an expert look at my computer where he found nothing wrong with my computer or wireless set up settings.

  any help or advice would be great

  Hello

  1. do you have problems connecting with Windows 7 or Vista?
  2. you remember of any change to your computer before the problem?

  Make sure that there is no interference between your router and your computer. For example. Mobile phones, like the mobile signals could conflict with your router signals and therefore no connection to your computer.

  You can uninstall and reinstall the Device Manager wireless network card.
   
  To uninstall the wireless device manager,
   
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  Pilots should settle automatically after the computer restarts.

   

  Now you can install the latest wireless drivers and check if this solves the problem.

• No communication between my computer and the CD/DVD drive

  Whenever I try to read CD or DVD through my laptop CD, the CD or DVD will not be detected by the computer. The disk drive (Hitachi HTS543232L9A300) is in good condition. What could be the problem and how to fix this problem?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Try to run repair before.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  I hope I could help

• How to enable the communication between the host and the virtual from Windows 7 computer

  Host: Mac OS X 10.6

  Setting of networking: NAT (also connected to the VPN work)

  VM: Windows 7

  I use my mac for my development. I have an application running with the Web Server server. I also use the hosts so that I can map the URLS of different web site with the same ip address.

  For example:

  On my Mac in/etc/hosts

  127.0.0.1 www.testsite1.com www.testsite2.com

  On my virtual from Windows machine in the hosts file

  987.78.125.125 www.testsite1.com www.testsite2.com

  When I'm at the office and using bridged connections, it works very well. However, I prefer to use NAT all the time.

  Is this possible?

  
  Thank you!

  I actually already answer your question but now I know the details, and by the way you have explained so much better the second time!

  When not connected to the VPN on the host computer and the guest knows the IP address of the Web server on the host (an appropriate entry in the guest hosts) then it should work but when connected to the VPN, if you are administrator does its job well, that you should not be able to connect the host to the guest for the reason mentioned previously...  Authenticated/no unapproved system (guest) cannot access an authenticated / trust system (host), while the VPN on the host computer is set up to your corporate network.

• Connection between the computer and the external hard drive stopped during the backup

  The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.

  Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.

  Reference: back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It will be useful.

  Let us know the status, we are happy to help you further.

• How to restore synchronization between the computer and android tablet. I lost sync and can't get it back.

  I lost the timing when I tried to make some other changes and now can't get it back. The computer wants the key to recovery of the Tablet, and I do not know how to find it on this device. I tried to uninstall and reinstall firefox Tablet and unsyncing of the computer, then restarting everything. I even created a new account with an alternate email address. Every time, even when I ask the computer to generate a new code and everything looks good, the computer will say that the key is wrong, and I should get from the other device. The 'how' was given instructions that would work since version firefox PC, but I can't find a way into the Android format. Can anyone help? How can I completely reset?... Or find the key on the Tablet?

  You can use this extension to get the key of the synchronization of an Android device:

  • See the sync key: http://limpet.net/key/
  • https://support.Mozilla.org/KB/how-do-i-manage-my-Firefox-sync-account
  • https://support.Mozilla.org/KB/Ive-lost-my-Firefox-sync-account-information

• No connection between the computer and the digital camera.

  Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there.  First, he tries with this camera. I have a HP and HP M305 camera.

  You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I gave you the original link will show also a lot more updates and drivers for XP also.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648

  To start Devmgmt.msc type device manager in the Start Menu / RUN box.  Make sure that the camera is fixed when you look in the Device Manager.

  Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
  http://www.TechSpot.com/VB/topic122125.html