Problems of storage USb Wireless WRT610N

Similar Questions

• wireless connection problems vista adapter usb wireless 802.11 b/g #2

  my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
  I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
  He repeats to me ' identify with. "
  Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

  Thank you for responding Srinivas
  I don't know the model but it is a HP, three or four years now.
  I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
  the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
  at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

  I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

  Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
  looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

  I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

  Thanks for the reply. I hope this information helps in similar cases in the future :)

• Deskjet 3050 a problem change from USB to wireless

  I got a Deskjet 3050 a printer attached via the USB port of my desktop HP Win7 64 bit for a year and a half. Attempts to convert the USB wireless. Instructions lead me the start--> all programs--> HP--> HP Deskjet 3050 J611 series a--> convert USB wireless.

  But when I open--> series HP Deskjet 3050 a J611, my only choice is:

  Connect a new printer or

  Add new software

  Nothing on the conversion of wireless USB. If I click 'connect a new printer' I have the choice of:

  USB connection

  Connection Ethernet / wireless

  Connect again later

  If I select wireless connection, it tells me to connect the USB cable. It is been connected for more than a year. But the button "Next" is gray and I can't move forward.

  If I select USB connection, it tells me to connect the USB cable. It is been connected for a year. The only choices I have are to return to a screen or check a box that says I'll connect it later, not now. I don't have to check but the 'Skip' button is gray and so I'm stuck again. I tried to turn the printer power off and moving the USB cable to the USB port of different desktop and power on printer again. I tried to reset the default printer on the printer control panel. The software does not believe that the USB is connected. This is the case.

  I pressed the button on the control panel of the printer wireless. It flashes blue.

  I'm usually pretty good with the resolution of this kind of thing, but I'm ready to break this piece of scrap on the ground and dance on his grave. .. .any help would be appreciated. Thank you!

  Hi Julie,.

  Thanks for the reply, sorry for the frustration. Here's what to do to uninstall it, in a more detailed form.

  • Click on the link above to access the driver removal tool.
  • Click on download and run.
  • Click 'Yes' when asked if you want to allow the following program to make changes to the computer.
  • A folder opens, look down and you'll see 'uninstall_l3' - select it.
  • The uninstall is running and restarts your computer.

  Now, it is normal to go forward, and then reinstall the printer.

  I hope this helps you, let me know how it goes!

• wusb100 usb wireless adapter is no longer recognized

  Hi, I have a wireless usb adapter wusb100 who ceased to be recognized when inserted into the usb port. It used to work very well and I think the usb can have viruses on it. I don't know if a usb wireless adapter can catch a virus? What can I do to check? I have windows xp pro

  Hello

  1. What is the exact error message?

  2 has there been recent changes made on the computer before the show?

  Please follow the provided steps and check if that helps.

  Method 1: Open recognition of the USB device by using Device Manager

  To initiate recognition of the USB device by using Device Manager, follow these steps:

  a. click Start; Click run, type Devmgmt.msc, and then click OK. The Device Manager window opens.

  b. Click to select your computer as the location for the scan.

  c. on the Action menu, click on Search the hardware changes.

  d. Windows XP recognizes the new device.

  e. close the Device Manager window.

  If this method does not resolve the problem, go to method 2.

  Method 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device, then check if it helps.

  For more information, see the link: troubleshooting tips advanced to General problems USB in Windows XP

  http://support.Microsoft.com/kb/310575

  Let us know if it helps!

• Problem connecting to the wireless LAN.

  My roommate and I just got wireless internet. She can connect without a problem by using his laptop, but refuses to my office. I have a B of Linksys Wireless USB adapter. Let's get our wireless network, he'll tell me that the network is out of range when I try to join. When I go to do it manually, it says "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. "I read somewhere that WEP data encryption may have to be modified in the WAP format, but this format is not an option on my computer.  It seemed that I needed to download. If it's my problem, I have another question, how do I download something from the internet when the problem is that my computer does not have the internet?

  My roommate and I just got wireless internet. She can connect without a problem by using his laptop, but refuses to my office. I have a B of Linksys Wireless USB adapter. Let's get our wireless network, he'll tell me that the network is out of range when I try to join. When I go to do it manually, it says "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. I read somewhere that WEP data encryption may need to be changed to training WAP, but this format is not an option on my computer.  It seemed that I needed to download. If it's my problem, I have another question, how do I download something from the internet when the problem is that my computer does not have the internet?

  The message about "5 or 13 ascii characters or 10 or 26 hexadecimal characters" means the WEP encryption (which is essentially no encryption as much as anyone other that the more casual intruder is concerned).  Yes, you should use WPA or WPA2 encryption, but your old wireless adapter may not support one of the people.

  You most likely problem is that the wireless router is configured to use wireless-G only.  You must be the one controlling the router enter the configuration utility and set it to allow two G and B.  If you identify the make and model of the router, I can tell you how to do it--assuming you have access to the router.

  You can consider buying a new wireless adapter.  http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=-1&isNodeId=1&Description=wireless+usb+adapter (read the comments before you select only on the price)

• Connection speed problems - black WUSB54GC usb adapter

  Hello everyone,

  This is my first post here!

  I googled nothing helped, and so I thought I would record with the Linksys forum and see if maybe I can solve this problem that others may have as well.

  I recently installed black WUSB54GC usb wireless adapter on my desktop PC, windows XP (now updated with service packs, etc.)

  The adapter receives the complete signal (very good - excellent, 54 Mbps), but it seems that my download speeds are capped with this adapter. Web pages same way load more slowly. I can place the macbook from my girlfriend directly next to my office, connected to exactly the same wireless network, and its download speed, browser speed and speed test results are always twice as me (any site speed test I use or what file I download).

  When I do a speed test, almost seems as if the speedometer needles few want to continue, but they just 'bounce', as they are hitting some kind of ceiling.

  When downloading files, the macbook on average 500 to 800 Kbps, while the adapter WUSB54GC hangs out at approximately 90 kbps.

  I have read in this forum and have adjusted my router Linksys WRT54G wireless suggested as follows:

  -Set the channel 11-2 wireless, 462 GHz

  -Change the interval of tag to 75

  -Change the Fragmentation threshold to 2304

  -Change the RTS threshold to 2304

  In addition, my connection speed is even slower, regardless if I have the settings TCP/IP (under the Wi - Fi connection properties) set manual (static ip) or automatically.

  Any help would be greatly appreciated, as I would like to be able to get this thing working properly, knowing that my router is pumping a lot more than this adapter is letting me use.

  Thank you!

  Well, I think I solved the problem.

  Seems that in some ports USB on my motherboard (Asus P5B) do not allow to run at full speed wireless USB adapter. I had used in the rear ports on my computer... but the passage for the first ports (that came with the case - Thermaltake Armor) seems to have solved the problem. However, as I believe that all of the USB ports I have is strange Hi-speed USB 2.0 and strange that those outside that came with the case and will connect to the pins on the motherboard works better than those actually built. Huh.

  Wouldn't be something to do with the drivers for the WUSB54GC, or is this a problem with USB port drivers?

  In any case, I'm sorry if this sounds like a useless thread now, but maybe this someone solve other problems too.

  See you soon!

• Windows stops my USB wireless adapter when it turns off and it does not recognize when it lights.

  I have new Dell with router Linkys, linkys Wireless USB adapter, - have had this same problem with other adapters, routers and windows XP.

  Wireless USB adapter works fine until the computer turns off during the night. When I turn on, cant' find internet b/c "no wireless adapter found" I disconnect, then reconnect the usb wireless adapter and it works very well.  I do this every time?  Is there a fix for this?

  Hello

  When you say "turned" off tell you off, or let go the day before?

  http://support.Microsoft.com/kb/928631/en-us

  Jack, MVP-Networking. EZLAN.NET

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device

  Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device.

  iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective.

• problem with storage space - iPhone 4 - 32 GB

  Hello, I have an iphone 4 32 gb. I'm having a problem with storage space. A few days ago, that even though I was taking 5 GB of empty space, a notification appeared that storage is almost full. I deleted about 2 GB of photos and videos. He showed me 2 GB of free space, but after 1 hour again the same notification appeared. As soon as I have emptied my space with about 1 to 2 GB by deleting photos or videos, it is completed with other data.

  How should I solve this problem?

  Thank you.

  What is the exact wording of the message? Could he be referring to iCloud storage?

  Also have you withdrawn your recently delete pictures and videos? Deleted ones is 'saved' for 30 days or more unless you intentionally delete/remove

  Why my iOS device I have more pictures that I can find?