Problems using the file on the server

Similar Questions

• Hello, how can the form in Adobe Muse run on a third-party hosting site?  MANDIC use the server to host the site. More the form of error. I couldn't find the solution to this problem.

  Hello, how can the form in Adobe Muse run on a third-party hosting site? MANDIC use the server to host the site. More the form of error. I couldn't find the solution to this problem.

  Please see this document for troubleshooting:

  https://forums.Adobe.com/docs/doc-3581

  Thank you

  Sanjit

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• Is there a problem with the server of Combat Flight Simulator 3?

  Is there a problem with the server of Combat Flight Simulator 3? I can play online because I can connect to the internet.

  I have READ 651,2 Kbps. someone helpme?

  Hi Roy sanchez,

  Thank you for using Vista answers Forum.

  What happens when you try to play?

  Here is a link to a few known issues with Combat Flight Sim:

  http://support.Microsoft.com/kb/331570

  I'm not sure of CFS, but most of the game servers are hosted by the players.
  You can check with your preferred server host to see if they are experiencing problems.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Use the server as a workstation

  Hello

  We have here a little 'constraint resource"by our boss. Therefore, work around. We want to use the server as a workstation. Then, someone has the server in his office and works happily with its windows. Meanwhile, on the same physical machine, a few servers run by office remote access and other. Then monitor the user must be connected to the server and the instance of windows.

  I admit, because of all these spheres and clouds that I lost products that VMware offers and what they are good for orientation.

  Someone at - it help him?

  Thank you

  Welcome to the Forums - it's sounds as if you try to set up virtual offices - the best solution for this iwould be VMware view, but given that it looks like you have the requirement that the hosting server will also be used by a user who won't work - you'll need to use a hosted product like VMware Server, which will be ontop of the user operating system uses one you would be able to create virtual machines which can then be viewed by other users via RDP you Office - the only downside is to ensure that the server hosting the virtual machines is quite powerful enough and has enough memory to support the load of the VMS and the shape of the workload of the user using this machine.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• IDLK Temp files when using the server

  In ID CS4 would create a temp starting with a tilde (~) file. I am testing CS5 before deployment to 100 users, and it seems that it is now create temporary files with a backslash and a tilde (/ ~).

  Fine on desktop, but off IT dept' manages the server PC with ZIP extreme to make them accessible. The server does not allow files with a backslash (\) in their. ID won't even open a file?

  Someone at - it similar problems? Can I change the way ID creates lock files? Or I need new servers?

  Cheer

  Mark

  (The last of them was not really an option ;-)

  What operating system do you use? On my .idlk Windows system files, which are files of lock and appear in the same folder as the .innd file that they are locking, always start with a ~. Recovering files is stored in the directory of recovery, have no extension file on my system and start with DBTmp or DBSharing.

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Problem with the server configuration tool Web + APSB07-02

  Recently, I applied the updated connector in APSB07-02. Today, I tried to create a connector to my new cluster CF and get the following error when you use the Web server configuration tool:
  
  "The JRun servers on host 127.0.0.1 must be upgraded to use this version of the Web Server Configuration tool"
  
  FC 7.0.2HF1
  JRun 4 Updater 6
  W2K3 SP1
  
  Is date referring too?

  The article for the hotfix has been updated. Step 7 Installing multiserver in the article also says to the jrun-hotfix - 65311.jar and save in {jrun_root} \servers\lib. This can cause problems if there are already fixes in the {jrun_root} \servers\lib. Step 7 will be changed to have the jrun-hotfix - 65311.jar put in another directory, then change the java.class.path in the {jrun_root}\bin\jvm.config file so that the jar file is at the front of the class resembles the following:}

  Java.class.Path={Path-to-jar}/JRun-Hotfix-65311.jar,{application. Home} / Servers/lib...

• I have rcd an aol email asking me to connect to correct problems with the server and took me to an unknown website waqui.press.ma once I've trashed this e-mail my server started working normal is this mail a virus?

  I received an email from aol asking me to log in due to problems with my server, it took me to a website "waqu.press.ma" is an attempt to plant a virus?  Once that I've trashed this e-mail my server was working normal.

  If you are on iOS as implied by your footer, and you provided no identification or such information to the server, you're probably fine.   (Unless your device is jailbroken.  This process turns off a large part of the iOS security.)   If you have provided something IDs, change these now and then determine what other information is accessible using the credentials - the content of mail messages, no password that have been sent to you, etc.

• Problem using the Overdrive Media Console software program

  When I try to download audio files using the Overdrive Media Console program (used by the public library in my area) I get the error message "error) xC)) D2781: problem occurred in the identification of rights management digital retriving.»   What is the reference for this?

  Hello

  • What is the format of audio file you were trying to play?
  • What version of Windows are you using?

  You can follow below link that can help you to solve your problem:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11E2&ContextId=71&OriginalID=C00D2781

• problem using the FileConnection API (JSR 75) in an application for Blackberry "BOLD" MIDLET

  Hello

  I developed a MIDLET which is to read files and store the contents of files in arrays. I could make using the FileConnection API in J2ME (Java ME) and it works very well in mobile emulators provided by Sun, Sun Kit tool 2.5.1 wireless and Sprint Wireless tool 3.3.2 Kit. I have been using netbeans IDE 6.8 for this.

  Now, here's the deal. Playback of the files does not work when in one of the Blackberry mobile emulators. I tried to install all versions of Blackberry JDE 4.2.1 to 5.0 and test the same thing, but none of them worked.  After reading that the Blackberry plugin for Eclipse is good, I used it to find that I am always faced with the problem.

  I desperately need help. Can someone help me do the reading work file in a Blackberry emulator? I insert the code that makes the file reading. It reads a file containing a single column of 60 entries, and stores it in an array of double type.

  Vector time = new Vector();
  
  try{
  
   FileConnection filecon = (FileConnection) Connector.open("file:///" +"SDCard/BlackBerry/documents/"+"timescale.dat");
  
   if(!filecon.exists()) {    Dialog.show("Note ! ", "File doesn't exists !", "okay","cancel"); }
  
       StringBuffer sb = new StringBuffer();      try      {       InputStream in = filecon.openInputStream();       int chars;
  
         while ((chars = in.read()) != -1)// read until EOF is reached       {          if(chars == '\n') // read all characters until the end of line is reached          {              time.addElement(sb.toString().trim()); // stores all the characters as a vector element when the end of line is reached
  
                sb.delete(0,sb.length());// clear the stringbuffer for storing the next line of the file
  
            }
  
            else          {              sb.append((char)chars); // appends each character read          }
  
        }// end of while
  
      }    catch(IOException e)    {               }
  
      filecon.close();
  
  }// end of outer try
  
     int i =0;   Enumeration etime = time.elements();
  
     while(etime.hasMoreElements() && i < 60) // timescale.dat has 60 entries in one column   {       time_1d[i]=Double.parseDouble(etime.nextElement().toString());// convert to double       i++;   }
  

  Can you elaborate on what does not work?  Is an error or exception thrown?  If Yes, what is it and what line of code triggers it?

  You have configured the BlackBerry smartphone Simulator to simulate a micro SD card?

  Use a computer filesystem in the form of microSD card

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/use-a-computer-file-system-as-a-microS...

• Having problems using the Arabic language in Windows 7

  Original title: I have language problem with my windows home Prem 7

  Hello

  I have the problem with languages, the Arabic one.

  When I try to write Arabic words in Notepad or Arab opening for laptop or any file letters Arabs language conversion in order to understand the language.

  And I tried to change the Arabic language in the Control Panel, but there is something missing,

  Look at the picture I captured, look at the space marked in blue

  http://WWW7.0ZZ0.com/2012/12/14/20/187833468.jpg

  where is the meeting?

  How can I solve the problem?

  Hello

   

  Welcome to the Microsoft community!

   

  You have problems in the use of Arabic text.

   

  1. have you installed the language pack?

  2. do you receive any error messages?

   

  If you have not installed the language pack, and then install it from the site:

  Language packs

  http://Windows.Microsoft.com/en-in/Windows/language-packs#lptabs=Win7

  Also visit the site to add or change an input language:

  Add or change an input language

  http://Windows.Microsoft.com/en-in/Windows7/add-or-change-an-input-language

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Problem using the REST API by wavemaker

  Hello

  I have a problem using other api with wavemaker. When I do a query GET with the RESTClientin FireFox, everything is fine for example:

  get https://XXX.XXX.XXX.XXX:8281 / vco/api/result:
  

  
  Status Code: 200 OK
  Cache-Control: private
  Content-Type: application/xhtml+xml;charset=UTF-8
  Date: Sun, 06 Apr 2014 16:50:04 GMT
  Expires: Thu, 01 Jan 1970 00:00:00 UTC
  Server: Apache-Coyote/1.1
  Transfer-Encoding: chunked
  

  But when I try to connect to the same url using wavemaker I recive: the answer is not in a valid XML Format.

  I use Orchestrator 5.5 and far as I could see the token is no longer required in the header. Anyone know why I get this error message?

  Thank you!

  

  Well half a day looking, then finally I thought to it:

  The header should be: accept: application/xml