Problems Windows has just started.

Similar Questions

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Windows Mail just started to duplicate my incoming e-mail messages (perhaps too outgoing). I couldn't find a solution in respect of the aid. Any ideas?

  Windows Mail just started to duplicate my incoming e-mail messages (perhaps too outgoing). I couldn't find a solution in respect of the aid. Any ideas?

  Check that you don't have 2 copies of the account specified under Tools | Accounts.  If this isn't the issue, then its likely the database has been corrupted.  Try to remove your e-mail account, and then compact and repair the database (www.oehelp.com/WMUtil/) and then add your account again.  Also, make sure the antivirus software is not interfering.  See www.oehelp.com/OETips.apsx#3

  Also, my OEX program (www.oehelp.com/OEX/) will remove the duplicate messages.

  Steve

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• Trial has just started... There is no button text only a text on a path tool... How to make a text box?

  Trial has just started... There is no button text only a text on a path tool... How to make a text box?

  The text button is under the text on a path button. Click and hold and it should reveal the buttons.

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The desktop icons and taskbar disappear when windows has finished starting - any of the usual things help

  I have a Windows XP Home Edition with a breath main card computer.  Replaced the Board, PS and other items.  Then re-activated windows and everything was fine.  Until the last moment, I rebooted after activating it.  I have the problem that I have seen posted in a bit.  When Windows has finished initializing all the desktop icons and task bar etc. disappear.  Nothing works.

  I can bring up the Task Manager and manually run programs, etc.

  Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.

  I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar.  I also ran several controls of virus, including one for the virus, which is usually the cause of this problem.  (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions.  Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back.  Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something.  In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem.  BUT I think it will break my record.

  I'm doing this as a favor for a friend.  But at this point our friendship is really put to the test

  Hello

  This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.

• Error: "Windows has not start because the following file is missing or currupt.

  Original title: System 32 error

  I have a netbook and wen as its turned on it just comes up with windows could not start because the followingfile is missin or currupt and askin and then reinstall how can I do this wth on a hard drive

  Hi Amandapowell,
   
  Try the steps listed in the following article and check if this can help:
  How do I recover from a corrupted registry that prevents Windows XP startup

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Windows has just recovered from an unexpected shutdown

  Whenever I leave my computer for a few minutes and am not using it, it stops and when I turn it back on I get the message "Windows has recovered from an unexpected shutdown" and it asks if I want to run it in safe mode or normally.  I called the manufacturer of the computer, and they say it's the operating system... Win 7 this is a brand new computer and I can't seem to understand.

  Hello

  you always get ths crash:

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  http://msdn.Microsoft.com/en-us/library/ff559329%28VS.85%29.aspx

  Arguments:
  Arg1: 0000000000000003, what a device object has blocked an Irp for too long

  So I checked the hanging query I/O (IRP) package:

  No Mdl: No system don't buffer: wire 00000000: Irp stack trace.
  cmd flg cl device file completion-context
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  > [16, 3] e1 0 fffffa8001cd3050 fffff80002cc3f70-fffffa80052c1640 00000000 success error cancel pending
  Cannot load the image \SystemRoot\system32\DRIVERS\MRVW24C.sys , 0n2 error Win32
  WARNING: Unable to verify timestamp for MRVW24C.sys
  ERROR: Module load completed but symbols can be loaded for MRVW24C.sys
  ------Driver\MRV6X64U nt! PopSystemIrpCompletion
  Args: 00015400 00000000 00000005 00000003
  [0, 0] 0 0 00000000 00000000 00000000 - fffffa80052c1640

  Args: 00000000 00000000 00000000 00000000

  The cause is the driver MRVW24C.sys:

  Image path: \SystemRoot\system32\DRIVERS\MRVW24C.sys
  Image name: MRVW24C.sys
  Timestamp: Thu Jan 19 11:03 2007

  This driver is too old and not Windows 7 compatible. Because there is no new driver unit (revA1 D-link wireless adapter DWA-130), change the energy saving features and disable them, so that the appliance is still running. This should fix it. If not, buy a Windos 7 compatible wireless adapter.

  Best regards
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Sound does not work! Windows 8, just started today!

  I've done everything I can to set up the sound, but nothing seems to work.

  When I re - start the sound will work for 2 min and then cut off and do not work until another re - start.

  I'm on windows 8

  This just started 07/13/14

  How can I fix?

  I fixed it! It's an update that does not work! I will give you instructions in Spanish (which is the language that I use):

  Open the CONTROL PANEL and enter DESISTALAR PROGRAMAS, once you're there opened in WORM PLOTS when he opened you will see all the updates and look for one that says FORNUIS WINDOWS KB 2962407 once you find, uninstall it and reset the computer! That's all! : D I hope it works for you! 

• Windows Mail has just started my mail read the deletion if I go into Inbox to any other box in Windows mail. I need a fix!

  Don't know why, but my read mail is automatically deleted if I go into inbox sent, deleted or any other box in Windows Mail. Can anyone help me please with the steps on how to change this back?

  Nevermind, I searched again and found my answer!

  Do not worry. It is not deleted. While in the Inbox: view the current view. You want to uncheck: Hide the Read Messages and show all Messages must be the only option checked. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• "windows has no start windows on the local computer search... code error 2147218141".

  I had to fix it several times and now does not yet: "windows does not have start windows on the local computer search... code error 2147218141".» I ran sfc/scannow, not received any error.

  Microsoft FixIt couldn't help.

  How can I do this time?

  I tried method 2, but things have just gotten worse.

  I see now 3 new errors:
  1: TL - bootstrap.exe has encountered a problem. I believe that it's associated with my smartphone.
  2: exception processing message c0000013 parameters 75b65f7c 75b65f7c 4 75b65f7c
  3: DrWatson Postmortem Debugger has encountered a problem and needs to close.

  Ugh!

  ------------------------------------------------------------------------------------------------------------------------
  Looks like I found a solution. I found that I still had
  WindowsSearch-KB940157-XP - x 86 - enu.exe in my file of download of one of the (now how many) times past, I had to solve this problem. I did a re-install and it seems that the Outlook and the Office up and running again.

  Phew!

• "Windows has no start, this may be due to a recent hardware or updated software or a change.

  I have read similar questions related to this problem and they all seem to be saying the same thing, the problem is that when I hit F8 nothing happens. I do not get a drop down menu that will take me again. I don't have any kind of discs with my laptop when I bought it and I'm running Windows Vista currently. Can anyone help? I has not used my laptop for 2 weeks while he is on vacation and locked securely so it went. When I got back home, I get this message and nothing works.

  I have read similar questions related to this problem and they all seem to be saying the same thing, the problem is that when I hit F8 nothing happens. I do not get a drop down menu that will take me again. I don't have any kind of discs with my laptop when I bought it and I'm running Windows Vista currently. Can anyone help? I has not used my laptop for 2 weeks while he is on vacation and locked securely so it went. When I got back home, I get this message and nothing works.

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here's how to reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon. Mick Murphy - Microsoft partner

• text missing Start menu missing, 10 to 20 minutes to boot windows, Explorer just started...

  something happened, it was just an ordinary day, I played some games, went to the internet, and then everything started late, hanging chrome, hanged Explorer, I started the security options to start the Task Manager, and then everything went totally to *. prepare security hanged options... I did a reboot, as it was the only thing I could do, computer hang in the balance sheet, I turned off the pc, he turned his back and "launch Startup Repair tool" appeared, I tried to start windows normally, it hung on the boot animation, I rebooted and started the repair, he was running for 45 minutes and he said that no problem not found I tried to do a system restore, but there is no point of restoration... then it starts fine, but always had been delayed as *, I uninstalled a few programs (trying to solve the gap) and among them was custopack (icon, start menu, taskbar visual mod), he had to restart, after it restarts, there was something weird to the logon screen... There was no text at all, after I logged the icons were not their names slot, there was absolutely no text anywhere, not even the date and the hour menu start did not work, security options were just a huge empty button (lock this pc I discovered), I looked around and discovered that perhaps it could be solved with the sfc/scannow , but he only said "Windows Resource Protection has not found any breach of integrity" so that the wrong, again, the pc has no text and hangs at the boot animation after that 30-minute recovery scan occurs with absolutely no result, and now im stuck here in this loop...... so I need help, I can't reinstall windows because I have important documents on my windows partition (office and others), and I saw that such a thing could be caused by malicious software, but of course I can't scan because I don't have the text on the buttons to her im like guess blind then How can I get the text, the start menu and everything back to normal?

  question 2 years ago, but in any case, the problem was that the hard drive has not to the point where he just died...