Problems with profile

Similar Questions

• Problems with profile after the loss of power.

  During the recent snow storm, the power in the House flickered market several times and once it was over my wife has had some problems connecting on his profile. After a reboot, could she do to her profile without any problem. My profile was gone, none of the documents office, my antivirus doesn't work in my profile only, everything that I had linked with my profile disappeared. My system restore has been disabled so can't use it. Does anyone have any ideas on how to do to recover my profile and all my documents?

  On the assumption that your profile has become corrupt (not a rare event), the following articles should help you...

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• Problem with Profile Service logon

  My Profile Service has not logon.  Profile of user was not found.  do not have the password reset disk. How can I access?  totally locked.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with profiles of camera calibration

  I use Lightroom 4.2 under windows with a Canon 450 d for awhile and I use only raw files.

  On the 'caméra Calibration' tab, I could choose between acr4.4, Adobe Standard and a few presets for canon (landscape, neutral, etc.)

  In my opinion the ACR4.4 profile gives me better and more natural colors most of the time

  Last week, I upgraded to a Canon 650 d. When I import my pictures and go to 'develop', I can only choose between the Standard Adobe and canon presets. There is no profile of x.x ACR (replace the 'x' by whatever it takes for a 650 d)

  It is not the end of the world, but is it possible to download it?  or did remove it completely for the newer models.

  In the window "about adobe photoshop lightroom", it says that I have Camera Raw version 7.3. Reinstall lightroom makes no difference and all my drivers are up to date.

  ACR's legacy profile. It no new cameras. It will not disappear for the older cameras, however.

  Adobe Standard is Adobe, well, the current standard.

  If it is not optimal for your tastes, you can change using the DNG Profile Editor.

  Rob

• Problem with storage of the profiles moved in field with the version 20.0

  Hello. Used an online translator. At the office of a local network with the domain name. All user profiles are stored by politicians in the field in the network folders on the server using equipment "the folder redirection. With the Firefox update to version 20, it stopped working. Pages that have been stored in bookmarks do not open pages only, open new, generally nothing happens as if the buttons in the page transition actions are inadequate, all search engines have disappeared. The complete elimination of the program and repeated installation does not solve a problem with a profile. Help, only the creation of a section local profile, but it is not a solution.

  Sorry,
  This is a known problem due to the use of UNC paths does not correctly supported by Firefox 20

  There will be a special ("Chemspill") version of Firefox. It will be Firefox 20.0.1 and will probably be released Wednesday, April 10.

  If you are unable to wait for to install Firefox ESR 17.

  Firefox17 ESR is affected by this problem and intended specifically for business / corporate, up-to-date and secure.

  • Information and download links
    http://www.Mozilla.org/en-us/Firefox/organizations/
    http://www.Mozilla.org/en-us/Firefox/organizations/all.html

  This is a related thread and it contains a suggested workaround solution /questions/955232 #answer - 424739 while continuing to use Firefox 20.0.0

  It's a shame these undertakings do not use ESR apparently do not test the pre-release versions in their IT departments. At least by two Aurora and Beta

  1. Evening http://nightly.mozilla.org/
  2. Aurora, http://www.mozilla.org/en-US/firefox/all-aurora.html
  3. Beta http://www.mozilla.org/en-US/firefox/beta/

• Problem with I1 Profiler update icuuc46.ddl missing

  ORIGINAL TITLE: problem with the I1 Profiler update.

  Hello

  I have the same problem as other users with my Stallion - I1 Display - when I update the software; missing icuuc46.dll.
  I am still using Windows XP SP3.
  Could you please help me?
  Thank you.

  Hi ajeshdsouza,

  I just wanted to say that they contacted me X-Rite and gave me the solution to my problem. And it is easy to do. Here it is:
  «Unplug your device from your computer, then download and install this new version of X-Rite devices.»

  http://www.XRite.com/product_overview.aspx?ID=1509&action=support&SoftwareID=1262

  Once you have installed it, restart your PC and when the computer comes back to the top again, please plug the device into a USB port on the back of your PC. »

  I hope this can help more people to solve this problem.
  Thank you very much once again for your quick response and your support, I really appreciate your help.
  Best regards
  Amaury.
   

• I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?

  I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?

  Update your video card drivers. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• I have a problem with restore profile

  I have a problem with the restoration of profile. Initially, I was in another forum where I had help (installation), upgrade and activate forum and I copy the location of thread (http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/06225f67-850b-4ae3-b29c-9b5204371a52) I need to restore my profile if you need more information, I will give you. Vista system.

  Thank you

  Can someone help me with this

• Common problem with temporary profiles being loaded

  I have a recurring problem with temporary profiles being loaded.  This problem appears more widespread when moving from one user to another.  Usually it is a user with administrative privileges to a user with admin rights, but also occurs when switching between non-Admin users.  Reboot allows profile to be loaded successfully.  I saw posts on what it needs to be done with a single corrupt profile, but have not seen anything about this type of persistent problem.

  Corruption of persistent profiles can be caused by 1) malware infection; (2) defective material. I would like to start by making a thorough analysis and then if the computer is clean, test the equipment. This last start by testing the RAM, then the hard drive.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  MS - MVP - Elephant Boy computers - don't panic!

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.

• Problem with auto-scroll.

  (Sorry for my bad English, it is not my native language)
  Hello, it's been several months I have a problem with Firefox auto-scroll
  Keep the pressure on the mouse wheel can slide in all directions of the web page, very useful for long pages as well as for pictures very high resolution.

  Stop for several version (from 40.0.0 I think but not sure), scrolling stops and / or is extremely slow and jerky, so that the page is not fully loaded. It's even more painful if we wait for a strong image on a slow website loading.

  I tested Firefox Safe mode and it doesn't change anything.
  Turning off graphics acceleration nor solves this defect.
  Test a new blank profile...
  Remove and reinstall Firefox...
  Namely, I have no problems automatic scroll on Internet Explorer or Chrome.

  As I visit the photo galleries large high resolution, is often sucks having to wait finishes loading before you drag on the page with the wheel in a hurry.
  I then let your knowledge to help determine the source of this defect.

  PS Windows 7 x 64 with ATI HD7870 2 GB

  OK, problem solved with version 45.0.

• The response of the cmd + 0 does not work. Is a problem with Safari or Opera or Mac Mail :)

  Try harder. But don't feel put out. The Mac never falls down. I have used them for decades and prefer the Mac. But I fell it twice before last weekend. Try to load Imaging Neuroscience with Matlab Run Time software. At the Apple machine. Nice guy, Henry. Could not diagnose the problem. Did a clean install. Migrated to OS X10.10. Do not like. I always have problems with the machine. But I love the machine. I hate using my machine BACK. Next to neuroscience, software that I use is an open software and UNIX oriented that meets the very good command line. A large part of the software is not ready pour.10 big but worked sur.9. Well, that is until the breaks down. Of the accident, well is the lesson for me, if you crash, debugging and do not go on to the next task until you have solved. Work with Apple with the report of accident in front of you.

  You know, in the part of Oscar Wilde, the Importance of being consistent, he tells Lady Bracknell that he lost both his parents. "For losing a parent can be regarded as a misfortune." But lost both parents statement of negligence. "Yes, two accidents. Shame on me.

  Well, we have all learned, don't we?

  Great to have this forum, however. Yay! Snoop by clicking his heels in glee.

  Instead of a completely clean reinstall, consider trying a drink first. It will at least save your bookmarks and passwords that you may be saved. This article has more information: Refresh Firefox – reset settings and Add-ons.

  If you really want to divert your existing settings, you can use the Profile Manager to start a new settings file. This article has the info on it: use the Profile Manager to create and delete profiles Firefox. I suggest NOT to delete your old profile immediately in case you realize is there irreplaceable data.

• Problem with favorites like white

  I have a problem all of a sudden when the update as usual there is vacuum bookmarks view all bookmarks inside.

  After reviewing the Menu option are only Bookmars > Show all bookmarks will be white as the attached picture. How to solve this problem that I've updated also version 37 to see the result, but the same... I don't like losing history when uninstall.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Problem with audio BT and I phone

  Problem with incoming car bluetooth connection and calls on the iPhone 6.

  BT Audio is not available for incoming calls on I Phone 6.  The software is up-to-date with IOS 9.3.2 BT Audio works with music, book audio apps but not with the portion of the arrival of telephone calls. I thought it had something to do with iCloud because he was out of storage space and I started to lose the apps. (Waze) - updated iCloud, bought more than place - problem still there. To hear that I have to activate the speaker phone.  If I hit audio car on the phone, no sound and it cuts the music.

  Greetings, MPTP!

  Thank you for using communities of Apple Support. My understanding of your problem is that you do not hear callers on your iPhone when it's connected to the bluetooth feature in your car. I love using the bluetooth connection to my car for hands-free calls. If you do not hear through your car stereo, which defeated the purpose. I'll be happy to help you!

  Here are a few basic Bluetooth troubleshooting steps. - Get help to connect your iPhone, iPad or iPod touch with your car radio

  You can also confirm whether the bluetooth of your vehicle will work properly with your iPhone 6. - iOS: supported Bluetooth profiles

  Travel safe!