Problems with resizing and rotation vector! (CS5)

Similar Questions

• curious problem with extrusion and rotation

  I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

  Example:

  

  I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

  The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

  If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

  https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

  It's about what you just mount the image with a transformative effect to match the extrusion.

  So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

  hope this helps

  https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

  If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

• problem with resizing and remove

  I have a problem with resizing images after loading, not all of the images has the scale ratio 0.75... so for the most part, I just stretch the images having the ratio...

  is there a good method of resizing/scalling? for example enjoyed.

  and once I've loaded images, I add in the imageContainer.

  I couldn't find a way, if I click on the next thumbnail, she remove the last child (image) of the imageContainer...

  I'm confuse ATM please point me in the right direction...

  Thank you

  Load the image clicked

  function mouseClickThumb (e: Event): void {}

  var thumb: thumbnail2 = e.target as thumbnail2;

  var linkName:String = e.currentTarget.name.toString (); get the name of the link

  var imageLoader:Loader = new Loader();

  var urlRequest:URLRequest = new URLRequest (linkName);

  imageLoader.load (urlRequest);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  function imageLoaded(e:Event):void {}

  var image: Bitmap = (e.target.content) Bitmap image;

  image.x = 0;

  image.y = 0;

  somehow if I resized the images here, it didn't turn right for all...

       }

  imageContainer.addChild (imageLoader);  / / How can I delete the last image? if click on the following icon?

  }

  If you want to remove the last (highest in the display list) child of a container, you can do this way:

  var numChild = imageContainer.numChildren ();

  imageContainer.removeChildAt (numChild - 1);

  don't forget display lists starts with 0, not 1, so you must always subtract 1 to get the level number of the child in the foreground

• Problems with AVCHD and Premiere Pro CS5

  Hello world

  I am a rookie with the first and AVCHD format, and this is my first time that I write on this forum. I hope you can help me with the following problem:

  I turned of the AVCHD clips in 1920 x 1080, 25 fps. I managed to create a project in first Pro CS5 (not a trial version), but unfortunately, I did the project with preselection of 720 p. After that, I learned that it is wiser to create project 1080i and adjust if necessary export 720 p phase down. Seems reasonable. Well I've started it all again and created a project of 1080i. For some reason I do not understand first do not recognize and import my clips and have not yet created sequence01 (default name) in the project window. Does anyone have an idea why this happened? I tried several times but the results have been as bad as the first time. Yet a 720 p test project has not imported clips. What makes this weirder is that after and hour or so I tried once more and this time everything went well. Everyone knows a similar situation with AVCHD and first CS5? This could be a problem first or did I do something wrong? I use Windows 7 64-bit.

  Another thing I thought is that what are the best export affecting export AVCHD 1080i (or 720 p) a project on YouTube? As I found alternatives: mpeg2, mpeg4, H.264, wmv... And is it important if I export the video first or encoder Adobe? In other words, all the tips for successful taken YouTube video are welcome.

  Thanks in advance!

  When things go weird reboot pc.

  Sequence must correspond to images which in this case his 1080i50.

  You choose a preset or drag an item to the new icon.

  

  

  To export on YouTube:

  Export should make it faster than the queue.

  

• Problem with resizing table InDesign CS5

  I have problems with resizing of tables in InDesign CS5.

  The width can be entered and a decrease, but the right height do move up nor down when you pull in the lower right corner or anywhere else on the base of the columns.

  Does anyone else have this problem?

  Is it a bug or maybe just me not understanding things correctly in the help...?

  Any contribution is appreciated if you knock out. :-)

  Document corruption is sometimes disabled by exporting for Exchange. See remove minor corruption by exporting

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• Problem with Illustrator and InDesign

  Hello, I am facing a problem with Illustrator and Indesign, when I copy a vector object from Illustrator into Indesign, I get the error: "import EPS file: InvalidFileAccess.»

  The file is saved on the pc, but I encounter this situation also files stored on the NAS.

  Any suggestions?

  Thank you to everyone

  InDesign has a preference of Clipboard, have you tried him affecting prefer PDF when pasting?

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• problem with java and pogo games

  I use mozilla, and now with the problems with java and hackers cannot play my pogo, what can I do? I disabled my java I tried java 6 does not work or is not safe, what is a safe way to play games on pogo using java?

  Pogo.com is determined as a website SAFE to use Java with Mozilla Firefox?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935