Problems with Server 2008 R2 Kerberos with Mac and CentOS machines? Need to re - join domain

Similar Questions

• STORE. E TV - problems with Mac and NTFS

  Hello

  yesterday I bought the Toshiba Multimedia Stor.e TV with 500 GB HDD.

  Packed, placed some data from my iMac on the HARD drive, it connected to my TV---> nothing works, the example of the files that were already on the work of HARD drive, won't my files.

  I thought of a few reasons and tried somethings out, the result: MAC metadata are the problem. The HARD drive got NTFS (which I also want to use in the future) and on Mac I use MacFuse to manage NTFS---> Far now without any problem, but somehow Stor.E tv will play all files that I have some Mac inside metadata.

  So, I copy the files from the disk on a Windows PC, just copy it to the Stor.e. ---> No fun at all

  ist ther ecoffet another solution? As an update of firmware that makes the Stor.e able to manage files Mac or an app that kan remove metadata files Mac?

  Sincerely Christian.abbel

  SRY for my bad English, I'm not used to use English

  Hello Christian,.

  The Toshiba HDD Multimedia Stor.e TV supports only MPEG-1/2/4, DAT, VOB, MP4, AVI, XVID and MJPEG files.
  If you want to use another type of file, you must convert in one of the supported file types.

  The TV Stro.e was not developed to play files metadata of Mac and it s so not able to read them.
  So unfortunately, it cannot update any firmware released for this.

  You copy the files to a Windows PC or you convert to one of the supported format.

  Sorry for no better news but that s with the specifications of the TV Stor.e.

  Best regards

• problems with SPA112 and answering machine

  Recently installed a SPA112 unit, which until this works fine without any problems, but have a few minor issues. Among others, I can't the 2 sec machine records messages; When there is an incoming call the answering machine picks up the call of the appellant Gets a busy; which means that the appellant is not able to hear the outgoing message, nor able to save?

  Worth mentioning that I have before that used a vDSL Thomson 78 modem x who offered two pots the same equitment I use was connected to and also the autoresponder has worked with. Then nothng has changed with the Setup program expect that the SPA112 has replaced the modem ADSL Thomson when it comes to managing the voip part.

  One suggestion I've seen is to change the 'delay to reorganize' at 15, which until now did not make a difference. In addition, the waveform of the ring has the sine value and the default value of the voltage.

  Open to suggestion to point me in the right direction what to look for in the config for the SPA112.

  Format text in time with no seconds and encoding UCS-16 can be ignored. But the messages are truncated at the first ',' and the rest is missing. Second file is the SQLite database...

  You are to test my ability do identify and treat the data hidden, isn't she?

  Well, I decided to extract the lines of SQLite database as TXT form is incomplete. I don't know any format if column Tm, fortunately, we have no absolute time and I wish I have guessed correct relative time in seconds.

  So result (inline comments):

  Incoming calls:

  002.13 > CC_eventProc(), the event: CC_EV_SIG_CALL_ARRIVED (0 x 31), cover: 0, rating: 0, par2: 0 x 40956900
  002.16 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_RINGING
  002.16: CID:CID_initGen() [0] > won 0 delay 1200 phone abcdefg786 name 46bcdefg786
  002.23: CID:OnHookTx PolRev

  Transmission of Caller ID:

  002.33 > uchSendDTMF(), sending 12 DTMF to line 0
  002.33: [0] beginning of the DTMF/FSK CID, CID_ST_ACTIVE
  002.48 > uchSendDTMF(), sending of DTMF a on line 0
  002.64 > uchSendDTMF(), sending of DTMF b on line 0
  002.80 > uchSendDTMF(), sending of DTMF c line 0
  002.96 > uchSendDTMF(), sending of DTMF d to line 0
  003.13 > uchSendDTMF(), sending e DTMF on line 0
  003.29 > uchSendDTMF(), sending of DTMF f at line 0
  003.45 > uchSendDTMF(), sending of DTMF g on line 0
  003.61 > uchSendDTMF(), sending 7 DTMF to line 0
  003.77 > uchSendDTMF(), sending of DTMF 8 to line 0
  003.93 > uchSendDTMF(), sending 6 DTMF to line 0
  004.08 > uchSendDTMF(), sending of DTMF 14 on line 0
  004.25: [0] CID CID: FACT

  Six rings:

  004.52: CID:Ring now
  004.54 > SLIC_startRing State 0 ts 0x1aa4ccon 1000 off 5000 len 60000
  004.54 > pol [0] of the event on the cad of ring 0 0
  009.33 > pol [0] of the event on the cad of ring 0 0
  014.12 > pol [0] of the event on the cad of ring 0 0
  018.92 > pol [0] of the event on the cad of ring 0 0
  023.73 > pol [0] of the event on the cad of ring 0 0
  028.52 > pol [0] of the event on the cad of ring 0 0

  Hook:

  029,50 > off hook [0]
  029.51 > NEW_CALL_STATE(), dial 0: former State = CC_CST_RINGING, new State CC_CST_ANSWERING

  Fully connected call:

  029.57 > NEW_CALL_STATE(), dial 0: former State = CC_CST_ANSWERING, new State CC_CST_CONNECTED

  Disconnected from the remote side:

  039.62 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
  039.62 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALID

  The CPC sent to the device called:

  047.64 > CPC SLIC_SET_OPEN_STATE on line 0
  048.05 > CPC go to line 0 in CC_CST_IDLE
  048.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLE

  Called device still picked up, assuming that the new (outgoing) call:

  048.07 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
  048.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING

  Called device hung up the phone, call the cleaning:
  048.72 > hook on [0]
  048.73 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE

  Camera won, outgoing call starts, digit collection:

  060.05 > [0] off Hook
  060.06 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
  060.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  065.20 > SIP_sessDlgEventProc: event: 41 (SIP_EV_DLG_TERM), ucState: 4

  Device on the hook even once, no figures were received in this cycle:

  066.01 > hook on [0]
  066.01 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE

  Camera won, outgoing call starts, digit collection:

  079.17 > [0] off Hook
  079.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  081.68 > line: 0 figure DTMFON event has received a
  081.81 > line: 0 DTMFON received the event figure b
  081.94 > line: 0 DTMFON received the event number c
  082.07 > line: 0 DTMFON received the event sales
  082.20 > line: 0 DTMFON received the event e figure
  082.36 > line: 0 DTMFON received the event number f
  082.49 > line: 0 DTMFON received the event figure g
  082.62 > line: 0 sales event received DTMFON 7
  082.76 > line: 0 sales event received DTMFON 8
  082.89 > line: 0 sales event received DTMFON 6
  090.96 > cepDialingProc(), the event = 33 (CC_EV_TMR_DIALPLAN)

  Figures gathered (numbering commited by dial plan timeout):

  090.96 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_CALLING
  090.97: call:[email protected] / * /: 0, rc = 0
  091.47 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CALLING, new State CC_CST_PROCEEDING

  REGISTRY procedure was shot and completed during call setup:

  097.66 > RegOK [0]. NextReg in 296 (1)

  Fully connected call:

  099.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_PROCEEDING, new State CC_CST_CONNECTED

  Disconnected from the remote side:

  103.75 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
  103.76 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALID

  The CPC sent to the peripheral component:

  103.76 > statr CPC CC_EV_TMR_INVALID timer
  111,76 > CPC SLIC_SET_OPEN_STATE on line 0
  112.19 > CPC go to line 0 in CC_CST_IDLE
  112.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLE

  The device still picked up, assuming that the new (outgoing) call:

  112,22 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  Flash hook events occurred. Dial 0 (data collectors) cancelled. New call (1)
  created, collection figures:

  112,37 > flash hook [0]
  112,37 > CC_eventProc(), the event: CC_EV_USR_HOOKFLASH (0x3), cover: 0, rating: 0, par2: (none)
  112,37 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE
  112.43 > NEW_CALL_STATE(), call 1: former State = CC_CST_IDLE, new State CC_CST_DIALING

  No number with shot composition timeout:

  136.34 > NEW_CALL_STATE(), call 1: former State = CC_CST_DIALING, new State CC_CST_INVALID

  Line is still the hook at the end of the journal.

  Well. So we have commented on the newspaper. Now - what is your question?

  Note that the CPC Signal (control Signal party call) is a momentary drop in voltage (0 volts DC) on the line for a period of time. It is the way in which the side 'server' of analog line (SPA112 here) informs device calling (your machine here) that the call has been disconnected by side called. Cisco is also using the CPCS to report the same he remote disconnect the case of incoming calls despite CPC does not has been provided for this direction of call.

  Not all phones can recognize the signal of the CPC, especially when called. SPA112 must be configured according to the particular phone's capabilities.

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• A message box you informed that there is a problem with DirectX and cannot start Command Conquer 3 &.

  Original title: problem with starting game.

  I'm trying to play Command Conquer 3 & on my computer but cannot start the game, whenever a message appears saying that there is a problem with DirectX.
  The game needs min. DirectX 9 c I have so I do not understand the problem. I have Nvidia Gforce2 mx installed Gr.card so it should play without...?

  The game is C & C 3: Tiberium Wars

  Help, please!

  Hi ChrisNiven,

  1 Windows operating system you are using?

  2 have you tried to update the Nvidia drivers?

  Method 1:

  Check if there are problems with the DirectX installed on the system. Use DXdiag to troubleshoot all direct X related issues. DxDiag ("DirectX Diagnostics") is a diagnostic tool to test the features of DirectX and the problems of video material - or sound-related.

  For more information, you can consult the following article:

  Diagnosing basic problems with DirectX

  Method 2:

  You can also consult the following thread link and try the steps to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/command-and-conquer-on-a-Mac-with-Parallels-6-and/c737a45b-7c91-458A-AAC9-66bff80236d1

  You can see the following link support Nvidia to download the latest version of the drivers.

  NVIDIA driver downloads

  Hope this information is useful.

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• problem with java and pogo games

  I use mozilla, and now with the problems with java and hackers cannot play my pogo, what can I do? I disabled my java I tried java 6 does not work or is not safe, what is a safe way to play games on pogo using java?

  Pogo.com is determined as a website SAFE to use Java with Mozilla Firefox?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935