Problems with SQL server 2008 nvarchar type varchar in oracle.

Similar Questions

• Problem with SQL Server 2008 migration

  Hello
  
  I am having trouble capturing SQL Server (Express 2008) tables/views/data for Migration to Oracle 11. I was able to connect to the source (SQL Server 2008 Express) and databases of destination (Oracle 11) on the same server (Windows Vista 32 bit). However, when I select objects SQl server (tables or views) and click on "Capture Microsoft SQL Server" or "Table of Capture" etc, nothing happens... No message and the tool is just sitting there. The models 'captured' is empty... Could someone please help? Where can I find the error logs? I followed the instructions as described in the help text and also found that some other people were able to run on SQL Server. I wonder what might be different about my situation.
  
  Thank you!
  
  BK

  Hello

  SQL Developer Migration Workbench does not yet support the migration to SQL Server 2008.

  See http://www.oracle.com/technology/tech/migration/workbench/pdf/migrationdatasheet_15.pdf

  This data sheet lists only the versions of SQL Server 7.0, 2000 and 2005.

  Maybe the next Metalink note allows more:

  Note 393760.1: how to migrate databases non-Oracle, for which an Option of Migration Workbench is not available

  Kind regards
  Wolfgang

• Developer SQL 1.5.5 is Compatible with SQL Server 2008

  We are trying to perform a database migration and we continue more "Location Source Plugin" has failed, we have the jTDS drivers from sourceforge, tried several versions including 1.0, 1.2, 1.2.2 1.2.4, 1.2.5 1.2.7 and 1.2.8... and I came across a problem of migration Sql Dev third party thread

  and I was wondering if the developer SQL 1.5.5 is compatible with Microsoft SQL Server 2008?

  These versions are old, older than SS2008 even.

  Fetch 4.0.3 version and a 3.1 jTDS driver.

  Details here

• New VC 4.1 with SQL Server 2008 installation

  SQL and VC on the same physical server.

  Operating system is Win2008 R2 64 bit, installed SQL Server 2008 64 bit, created by 64-bit ODBC DSN, installed VC 4.1

  When we arrived to the ports and tried to accept the default Port 80 has received an error "already in use."

  We do not have any statement in the SQL, then I think that Reporting SERVICES is not installed.  We changed the port 8081 and collected by the mistake, but I learned by VMware support this causes big problems when you install the Update Manager, port 80 must be used for updates.

  Has anyone encountered this problem?

  Any help would be greatly appreciated.

  For me the solution was to stop the SQL reporting services... They were using ports 80 and 443.

• E.M.P. 11.1.2.2 configuration with SQL Server 2008 R2

  Hello
  
  I was wondering if he should place the sqljdbc4.jar under any folder EPM_HOME\MW file to connect to SQL Server 2008 when you configure using the EMP system configurator.
  
  I'm just be proactive and ask the question because I had to do the same thing when configuring with SQL Server 2008R2 ODI...
  
  Looks like Oracle don't like MS and visa versa... Why not include just this file JDBC installation.
  
  Thanks in advance!

  No you shouldn't need drivers for sql server additional to configure SQL SERVER in the configurator to EMP they are included as part of the configurator.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• need help with SQL Server 2008 R2 deadlock uninstall process

  I installed SQL Server 2008 R2 trial version on my PC running Windows Vista Ultimate, a day ago, but he placed himself completely in the disk partition (E :) that I specified. [i.e. I found some parts of the installation in my C:\program files as well as a USB as well].

  I tried to uninstall SQL Server 2008 R2, but was only partially successful.  I'm prevented from uninsalling the main parts using the programs and features Panel - that is "Microsoft SQL Server 2008 R2" and "Microsoft SQL Server 2008 R2 Setup (in English).

  Still visible are:

  1 C:\Program Files (x 86) \Microsoft SQL Server

  2 C:\Program Files (x 86) \Microsoft Visual Studio 9.0

  3 C:\ProgramData\Microsoft\Windows\Start demarrer\programmes\microsoft SQL Server 2008 R2

  I would like your help to uninstall the other goals of SQL Server, so that I can do a clean install once more.

  Any advice on how SQL Server 2008 R2 evaluation version must be correctly installed what a future unistall is not messy, would be welcome.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the SQL Server forums. Please post your question in the SQL Server forums.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• E.M.P. 11 compatibililty with sql server 2008

  Hello
  
  Version 11 does support sql server 2008 for data repositories? I couldn't find anything in the support matrix, but heard it was possibly.
  
  Thank you
  
  Nathan

  Hello

  It don't support it officially yet, apparently in the next version, it will be (don't keep me as well)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• A problem with Windows Server 2008, Enterprise Edition

  Hi, I have a problem with ad on windows server 2008 Enterprise that when I try to install active domain services directory for me this message appear:

  
  
  http://img826.imageshack.us/img826/7508/39552832073804633241230.jpg
  
  Notice: I'm sure that password is complex and I erase and I disabled complex password policy and it appears again.
  Anyone has a solution or this problem before him

  Hello mohammedtayea,

  The question you have posted is related to Windows Server 2008, Enterprise Edition, and would be better suited to the TechNet ITPro community.
  Please visit the link below to ask your question in a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

• HA with Sql Server 2008 and EMC

  Hello colleagues!

  I work with an active-passive sql cluster, the cluster is based on MSCS (Microsoft Cluster). Each Sql nodes is sitting on separate hosts of Esxi5. LUN is sitting on the machine of the EMC AX4 with iScsi.

  I have a lot of problems with this group. I experience several unnecessary failovers.

  I would consider moving on VMware cluster.

  The problem is that I can't find a good reference on the VMware SQL Server HA environment solutions. The problem is how do I know that this failover will not damage files my SQL servers mdf\ldf?

  The experience of someone?

  Thank you!

  -Chen

  My 2 Cents

  I am looking for a solution that knows what VM SQL fails on the #1 host (VM, not the crowd!) and will trigger an another VM (on another host #2) which will have the LUN (in the EMC storage) - I I will achieve my wishes.

  To do this, I recommend always to create 2 VMs and implemented a MSCS on the VMware host computers.

  In your cluster settings, create a rule of affinity to never operate these 2 machines on the same host.

  FT might work, but there are 2 problems:

  -Don't take charge 1 vCPU VMs. Don't know if this SQL box can work with 1 vCPU

  -FT creates a virtual machine in doubles at the stage of the lock. If the main VM operating system crashes (blue screen) the other VM will likely be the same.

  The purpose of FT is to have no interruption of service in case of failure of the host. It does not protect the BONES

  But it might be possible with a single VM SQL based on HA only.

  When a host fails, the SQL VM starts on another host. Now depending on how long this virtual machine takes to start, it could be 1-2 minutes downtime. You will need to test the startup speed.

  When an MSCS falls down, according to the Setup, it could also mean 1-2 min downtime, which is the same result

  Don't forget to assign points to useful/correct answers by clicking on the tabs below

• Error with SQL server 2008 for migration of ODI 10 ODI 11 g g

  Hello

  I'm migrating ODI 10 g, 11 g with the Assistant provided by Oracle , but each time, I get the following message:

  [ODI] [INCIDENT_ERROR] [UPGCMP-00338] [update. Repository working ODI ODI] 'ODI_WORK' uses JDBC Driver "com.microsoft.sqlserver.jdbc.SQLServerDriver".

  [ODI] [INCIDENT_ERROR] [update. ODI] Cause: ODI work Repositoriry don't use default JDBC driver. Action: Please update connection ODI repository work to use default JDBC driver

  No idea how I could fix it?

  Concerning

  Jean

  Try user weblogic sql server driver

  Driver name: weblogic.jdbc.sqlserver.SQLServerDriver

  URL: jdbc:weblogic:sqlserver://hostname:port: [; property = value [,...]]

  The driver lib:wlsqlserver.jar

• Problems with SQL Server availability at the time of the instant withdrawal

  I use VMware VCB to backup a virtual computer that is running SQL Server 2005. Hang it works very well when the snapshot was taken, but I'm getting errors in my web applications .NET at the same time that the deletion of the snapshot is in progress. The errors indicate that the SQL Server is not available. Thus, the network does not respond for the snapshot validation process or e/s SQL Server gets interrupted (perhaps through an another quiesce?), when the snapshot is removed. Anyone know why that would happen? Do not hang the OS VMware at time of the instant withdrawal as well?

  No patch I know which would cause instant removal to pause the plu VM.  3.5 U2 introduced VSS in the virtual machine, but components that should affect only when a snapshot is created.  Also create the snapshot with smack memory made a break the considerably longer VM, but still affects only the creation of the snapshot not the elimination.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Migration SQL server 2008 SQL server standard, what is the best?

  Good evening

  I need help for a migration to sql server.

  We already have a vcenter 5.1 production installed in Windows 2008 R2 x 64 with SQL Server 2008 express. Our data increase and ourODBC cannot answer for our use. We need to migrate to SQL server 2008 Express in SQ server 2008 standard.

  I have a problem with the software installed Vmware (SSO, Update Manager).

  I have two choices:

  • Install a new Server 2008 R2 with SQL Server 2008 Standard and import datas beetwen current server to our new.
  • Migration on our current server SQL Server Express to the standard.

  What is the best solution?

  Kind regards

  You must check odbc 32-bit and 64-bit. If not mistaken only um uses 64-bit

  Sent from my BlackBerry® smartphone Maxis

• Windows Server 2008 R2 Enterprise Edition x 64 + SQL Server 2008 STD SP1 on paravirtualized VMDK = crashes?

  Hi all

  So far, I have a problemin of deployment with SQL Server 2008 STD SP1 Windows Server 2008 R2 Enterprise x 64 installed on Paravirtualized VMDK for best performance.

  but when I run SQL Server Mgmt. Studio to browse the database inside the paravirtualized disk blocks can always 100%?

  I'm also unable to perform a backup of this virtual machine using VCB:

  Creating snapshot of the Virtual Machine

  * Cannot

  create a suspended because the create snapshot snapshot operation

  timed for the outfit out of e/s in virtual jelly

  machine *.

  No chance in this guys case?

  Kind regards

  AWT

  My Installation of SP1 SQL 2008 hangs on the audit of the rule on a Windows Server 2008 R2 on vSphere ESX 4.1. So, I changed my SCSI controllers type of ' paravirtual' LSI SAS parallel, then it works fine.»

• SQL Server 2008 Standard Edition download

  Greetings,

  I want to install SQL Server 2008 Standard Edition on a dedicated server hosted remotely in a data center. I already bought a server license (DVD), however, now that I want to install it on a dedicated server, I can't use the DVD and I would like to download the Setup program for SQL Server 2008 Standard of MIcrosoft.Com.

  -Can you give us the URL to download the edition of SQL Server 2008 (not R2) Standard?
  -Is the code/product key that I have on the work of DVD label with SQL Server 2008 R2 trial where I can download is more setup for SQL 2008 Standard?

  Thank you

  Please see:

  How to replace hardware or lost, broken, or missing Microsoft software

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• Portable JDBC with SQL Server on 64-bit Windows computer connection

  I'm trying to set up this connection using a call for open source Modelsphere.

  I am running home premium windows version 7.

  I downloaded the 4.0 driver JDBC Microsoft SQL Server (sqldbc4.jar) and put it in this directory:

  c:\Program Files\Java\JRE6\Lib\Ext

  The class I use the Modelsphere application is: com.microsoft.jdbc.sqlserver.SQLServerDriver

  The database url is: jdbc:sqlserver://localhost: / CallSheet.

  I enabled using the Configuration of TCP/IP Manager.

  I also enabled the telnet, but when I try to command: telnet 192.168.0.0 1433 or telnet 192.168.1.1 1433 I get an error saying "could not open connection to the host on port 1433: connection failed."

  What else, need to do or change to get the connection work?

  Thanks in advance.

  Hi RStraka,

  I had a problem with SQL Server and I posted in the Microsoft Technet folder and it has helped me.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

  All the best!