Problems with the 8.1 update

Similar Questions

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• PROBLEM WITH THE INSTALLATION OF UPDATES

  When the computer tells me to reboot to complete the installation of updates, I do.  It stops normally, but when he tries to restart, the screen goes completely dark.  I have to press the market / stop button for 4 seconds & it stops.  I wait a few minutes start computer & it starts normally & then it finish installing updates.  My question is what could cause the problem?  I learned recently by Microsoft (office of answers) that there is a big possibility that I corrupted the registry files. She did a remote help on this laptop for a problem with the execution of any Microsoft fix it Solutions.

  I would like to know what else could be the cause of the problems and what I could try to fix it?

  CF. http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-updates-wont-install/9ae86061-ff1e-4996-b5a2-8918d01588ab (10 Dec-15)

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• Problems with the Windows 7 updates

  I have problems with the updates of Windows 7.

  The show just download but stay at 0%, even after a number of hours of updates.

  Looks like I have had the problem for a while as I click on the button to download when he says that they are available, but they were not the installation. Since April - the highest numbered download was KBS3149090.

  I tried a couple things from these forums, but they do not work or do not install it.

  I downloaded wu10.diagcab but it does not return an error of 0 x 80070002

  You are looking for takes this mistake me https://support.microsoft.com/en-us/kb/910336 that says stop the update, remove a certain number of files and turn it back to the.      

  He says then try the System Update Readiness tool so I download and install this KB947821 , which seems to settle.

  I try to install the updates but nothings happening - don't know what else to try.

  Peter

  Windows Update process: July 2016

  I've seen this many lately.  This is what works for me and I did it on a large number of computers in the last 2 weeks.

  1. Change Windows Update settings to NEVER.

  2. Type services in the text box that appears when you click on the globe to start

  3. Select and open the services window

  4. Find and right-click on Windows Update (service), choose stop

  5. Close the Windows Update window.   If she will not close, start the Task Manager (right click on the taskbar) and end of the task.

  6. Now go to: http://wu.krelay.de/en/2016-07.htm

  7. Download 5 all updates are listed in a folder on your desktop.  Choose the correct column for your computer.

  8. Double-click on and start each one, one at a time.  Don't be surprised if one or more respond with already installed.  It may take a while to process.  This is probably one or more of them will install.

  9. You should not restart after each one ends, if there is more than one installed.

  10. Restart and wait for the Windows Update process to complete and automatically reboot your computer.

  11. Open Manager tasks again and wait until you see the percentage within the reach of the bottom and stay below 10%

  12. Now start Windows Update

      The Windows Update process happens much faster that it would otherwise have.

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Serious problems with the 6.16 update: reboot page & chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• I'm having a problem with the installation of update for Windows Vista (KB973768) security, error code 80073715's anyoe can help me?

  After getting my laptop to factory State, I ran the update of the window and got stuck to the update of security for Windows Vista (KB973768). The error code is 80073715. The update does not always settle anything I tried (reboot, download directly from the website of window, run the diagnostic window and solve problems). If anyone can help me, I really appreciate it.

  ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 80073715

  The identity of the manifests are identical, but their content is different

  In a Word, there is a problem with component maintenance (EC).

  The information stored on the content of the file does not match what is present in Windows\winsxs.

  Try another attempt to update. If/when it breaks down, thanks for posting the * last * 50 or if WindowsUpdate.log lines in your answer:

  How to read the Windowsupdate.log file

  http://support.Microsoft.com/kb/902093

  In addition, please include the edition of Windows and the Service Pack level of operating system-

  For Vista \Win7, * right * click the computer on the desktop or the Start Menu, and then select Properties. The information is under "Windows edition".

  04/09 / 1107:46: 58 pm

• Problem with the security sysytems update KB3110329 for Windows 7 64 x-based

  Microsoft is aware of this problem with security update KB3110329 for Windows 7 x 64 systems? Have they fixed it? Thanks to John Butler to isolate the problem of configuration updates from January 12, 2016.

  Bill Blair

  Dear Jayant Gupta,

  Thank you for your response. When I tried to install the updates from 12 January 2016 on my Windows 7 computer, I met a problem at the stage where I have to shut down the computer to complete the process. When configuring updates, he remained at 12% for a very long time and then permanently returned to the opening of session and when I checked the history update based on the x 64 updates eleven have been identified as having failed.

  I ran to the resolution of the problems of Windows Update. I did not try to reset the Windows Update components for fear of making things worse. I see at least another user, John Butler, has encountered the same problem and he identified the update of security KB3110329 as the cause of the problem of configuration.

  Later, I downloaded the updates again and hid and then successfully installed their KB3110329 leaving unchecked everything.

  Currently, I have hidden KB3110329 and wait for the opinion of its repair.

  Thank you for your help.

  William Blair

• Problem with the resolution after update

  After the update, I have a huge resolution problem (this happens only with the PS, not with DW)

  I attach a screenshot

  It's something that's never happened before, must be commensurate with the new version. How can I get that back to 'normal '?

  Normal, which means that this

  

  Hi antoniod19097390,

  Greetings.

  • Please try to change the settings in the option of the PS interface

  -Screenshot check

  

  • Click ok and restart PS and then check again.

  Concerning

  Rohit

• Illustrator update problem with the new package update

  When I enter help/update, it appears the Erzberg adobe to update application window and then he said: "the detected server does not respond, the server may be offline temporarily, or the settings of firewall or internet is perhaps incorrect" what should I do?

  everything worked! for those who have this problem, try this:

  Solution

  (1) open the network and sharing Center

  (2) click on change adapter settings

  (3) with the right button of the card Microsoft Virtual WiFi Miniport, and then click on disable.

  (4) run the Adobe Application Manager - I hope that this time he will succeed.

• I have a problem with the Windows Store updates.

  All of a sudden the app store came with updates for 4 items, the observer of the team, finance, travel and news. First of all, I don't have to install outside the viewer of the team.  So I install all updates of four, and then uninstalled, finance, travel and news. Then they cam right back up as updates in the store windows again. Windows store needs an update.

  

  There is not need to troubleshoot... this question is server-side, no amount of troubleshooting/patches help right now, see the thread I posted above and read it

  In addition, Windows Update has nothing to do with the update of the modern applications, they do not automatically install it, this will change in Windows8.1 (apps will be able to update automatically)

• Problem with the installation of update (KB951847)

  I tried a thousand times, but it always fails to install an update of .NET Framework: Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86
  I tried several troubleshooting techniques, none of them worked and I don't know what to do, can anyone help?

  Hi Mark,

  ·         What is the error it fails with?

  ·         What troubleshooting measures have tried to solve the problem?

  Check if you have tried the steps in the following article.

  Troubleshoot installation of .NET Framework