Problems with the installation of the bridge and the company

Similar Questions

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• Problem with Raw partitioning for Adobe Bridge and CS6

  I was using the latest DNG Converter and files were converted until I had to replace the camera Monday, now I get the folder does not contain any supported camera raw file. The converter was working before my duty to replace my Nikon D500, suggestions. ? I'm sure it's something simple.  I have redownloaded the converter and the problem persists > help please.

  Moving to the Camera Raw forum

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  Mac or PC? Version of the OS? What version of CS?

  Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.

  Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.

• Problem with the installation and activation of Autodesk Autocad 2011

  I'm having a problem with the Autodesk Autocad 2011 activation. After I download and install the software, there should I active and a window opens to activation. The problem is the window is empty and I tried closing and reopending the program. I tried to uninstall and reinstall the program several times and get the same result. I checked the site Autodesk solutions and tried what they suggested, but without success. Help, please.

  Thank you

  Matt

  Hello

  You can activate AutoCAD, through activation and the recording interface, you can activate your product 24 hours a day, seven days a week, through the Internet or by e-mail. Or the other option takes only a few steps to complete and requires your product serial number and registration information.

  http://images.Autodesk.com/ADSK/files/autocad_2011_faq_us.PDF

  Also try the suggestion in the given below link and check if this is useful to solve the problem.

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10244471&LinkId=9240617

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10243884&LinkId=9240617

  If this does not help, you must contact the support of AutoCAD to help you activate the product.

  http://USA.Autodesk.com/ADSK/servlet/PS/index?siteid=123112&ID=2714854&LinkId=9240617

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not install Lightroom 6 after a problem with the pc and upgrade to Windows 10. "Errors occurred on your installation.

  Hello

  I am a user of Lightroom 4 since it came out and it worked fine.

  My system is based on a motherboard Asus Maximus III, the Intel Core i7 875K 2.93 GHz processor, card EVGA Geforce GTX 960 Graphics, Corsair Vengeance 8 GB of RAM.

  I used to have Windows 7 Home Eng 64 bit on it.

  After installing Lightroom 6 everything is fine again, but then the evil came:

  There was a problem with the pc, so I had to use the restore before installing Lightroom 6 point, bringing back me to Lightroom 4

  The problem is that somehow my internetbrowsers stopped working one by one. A virus? Norton was running, so it shouldn't.

  The restoration of an early version did not help the problem

  I needed the PC for work so I installed the free update for Windows 10

  Now, I can not install my Lightroom 6 more: it keeps giving me the following box:

  

  Of course stop the firewall did not help. Looks like a standard sentence as well.

  How to solve this?

  Thank you for reading.

  Settle in the right forum.

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck