Problems with the new modem DSL and Linksys BEFSR41

Similar Questions

• Problem with the new hardware wizard and PCI bridge PCI to PCI standard

  I have problems with VMware Fusion 2.0.2 on my MacBook Pro (Mac OS X 10.5.6).) The guest from Windows XP Pro (SP2) Found New Hardware Wizard keeps wanting to install a software for "PCI standard PCI to PCI bridge". I tried to do 'automatically' and "install from a specific location" using the Windows disk, the MacBook Pro and the Mac OS X disk. In each case, I get the message 'not succeeded the Windows Logo test'. If I click on "continue anyway" is seems to load pci.sys to C:\Windows\System32\drivers. I click 'Finish' in the last window but it begins the loop again and again and again. The virtual machine network adapter is set to NAT and everything seems to work fine, but I can't stop this annoyance. Any ideas?

  There are 32 of these devices.  How many times have you finished yet?

• Problems with the new XPS 8700 and upgrades...

  Hello

  I need help!

  I just bought an XPS 8700 a week ago (maybe more).

  It came with: pre installed with Windows 7 Pro, installation / upgrade disc for Windows 8 Pro

  (Pentium 4790 16 GB RAM 4 GB Nvidia GTS 745 VC)

  A few days after I ordered an ssd of m Cruscial 480 GB for her, with a WD 1 TB HARD drive.

  My problem is centered around the M SSD.

  The Crucial SSD of M IS compatible with this system?

  I try to set it up and the system hangs.

  I can't use ready boost, or it will be BSOD.

  I want to load the OS on the SSD m and use the other 2 HDD as data drives.

  JD

  JDclsuter13x

  My other question is: System running Windows 7, but comes with a Win 8 restore disc?

  Its rights to licensed Windows Pro 8.1 with downgrade to Windows 7 Professional. You will need make the recovery using Dell backup media and restore your original disc. Theres no need to change the BIOS settings earlier.

  After that, remove your hard drive and insert your mSATA SSD. Use the Dell backup and recovery USB to reinstall Windows on the mSATA SSD. Once you are satisfied with the installation of Windows on the drive mSATA remove it and insert the HARD drive, use DISKPART OWN while using your DVD of Windows 8.1. Then insert the mSATA SSD, Windows 7 starter and initialize the HARD disk, implemented as a data reader.

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• I have a problem with the Narrator, repeating words and phrases.

  original title: NARRATOR in WIN7 SUPPORT

  I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

  Original title: Narrator sometimes repeat words and phrases

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) exactly where you run the Narrator?

  (2) the Narrator extends from a particular document?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I wish that return you the items for assistance-

  Narrator doesn't read what I expect him

  http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• How to maintain the availability of the data store after the upgrade to ESXi 5.1 with the new IP address and the naming convention?

  How can we maintain access to the presented LUNS and VMFS data store after we improve the ESX in ESXi with the new naming convention and the new model of IP addressing?

  My back-end SAN EMC Clariion is VNX

  Thanks in advance.

  How are the hosts connected to storage systems. With FC HBA for example, there is basically nothing you need to do since the WWN will remain the same and so LUN presentation of the zoning on the switch and storage system does not need to be reconfigured.

  André

• Problem with the new RPD file OBIEE 11g deployment

  I'm working on a recent ' 30/09/2010' installation of OBIEE 11 g on a platform of Windows 32 - bit, with an instance of Oracle 11 for MDS database.
  
  I created a new RPD with the new admin tool and use Enterprise Manager to deploy (upload) and activate the changes. Just to be on the safe side, I also restarted everything.
  
  Now, "things are breaking" the service bimiddleware is showing a 'red' arrow down, bipublisher is also declining.
  
  Any attempt to connect to the analytical application (with valid credentials) fails with an authentication error.
  
  Looking through the log file I find this entry:
  "[13026] error getting roles FMW: ' [nQSError: 46164] HTTP server returned the error 404 (not found)" to URL. ""
  
  Can someone tell me what could go wrong?
  
  Thank you
  
  Richard Brooks

  How about making them even then?

• I have a problem with the new administrator creating accounts and the original missing on the computer account.

  Original title: profile has been automatically removed, new profiles created automatically and can not open a session

  Help! I closed my laptop (only in the ordinary course of its use) and when I turned it back on, my usual user profile was gone and a couple of new ones have been created. One was created with my professional e-mail address as username (which is strange because I've never used this e-mail in the computer) and the other is empty. I tried to connect both of the profiles using my old combinations of the new user name and password, or user name and the old Word, but it is said that the account and the password is incorrect. I also tried to log on as an administrator, but it says "your account has been disabled. See system administrator. Is it possible to recover the data in the old profile without reinstalling Windows because I am away from home and do not have the disc. ... I use Windows 7.

  Thank you very much in advance for any help!
  You might be able to solve your problem using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.
  On questions of password-, I treat my PC as I have my house: I always have a spare admin account / SpareKey so that I can return new anything that happens. You have a fully tested alternative admin account? If you do not, and if the method above doesn't work, then, you have a major problem that you will not be able to resolve without a CD to repair Windows.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Router WRT54G wireless does not work with the new modem

  Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

  The connection between my PC and the router (http://192.168.1.1) is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

  After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

  Help, please

  Hi Matt,

  Although the resolution of this problem was a little simpler, I still thank you for your answer.

  The neighbor boy came up with the following response:

  «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

  And he was right!

  I am so happy

  BR,

  Niqui

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with the new update

  Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

  Hello

  Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.