Problems with the page in Internet Explorer 7 times layouts

Hello

I created this site in Dreamweaver CS6 using webfonts.

http://www.fjgpharma.com/index.html

It's fine on all browsers except IE 7 , where the type on the pages that follow is not displayed correctly:

• Index - blue sub-heading is divided on two lines when it should be on a

• About - 'technical management' appears as a sort of link

• Services - dashes are misaligned

I've already added the following code:

<!-[if lt IE 9] >

" < script src =" http://html5shiv.googlecode.com/svn/trunk/HTML5.js "> < / script > .

<! [endif]-->

Can anyone offer me any advice on how can I fix?

Thank you!

By 'technical management' is displayed as a link, I'm guessing that you have some kind of Malware or downloaded Junkware that infect your version of IE7. There is no link in the code, so it should not appear as a link in any version of any browser.

You can run an anti-virus/malware program and see if it picks up anything.

Are you sure you still want to support IE7?

According to everything I've seen, somewhere in between. 5% and 1% of all users have installed IE7.

Now with Windows XP "death Date" set for April 8 next year, IE8 should start to fall dramatically (currently at about 6%) current XP users are forced to upgrade or be subject to unpatched issues after this date.

Tags: Dreamweaver

Similar Questions

  • I have a problem with the installation of internet explorer 8

    I tried to open the IE 8 installation and he said this thing:

    The Setup program could not verify the integrity of files needed for the installation. Make sure the cryptographic service is running on this computer.

    I checked the cryptographic service and it says it works... so I don't know what to do
    Please help me!

    By the way, I have windows XP

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.InternetExplorer.General&cat=en_us_28cca3eb-7037-4D4F-bde1-d8efee1f1420&lang=en&CR=us

    Internet Explorer discussion above for your problems of IE8.
    This is the right place to ask your question of IE8.
    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

    Above is the link for the XP Newsgroups.

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

    And Windows Update discussion group if you need.

    Here is the Vista Forums.

    See you soon. Mick Murphy - Microsoft partner

  • Problems with the text in Internet Explorer, Vista

    I have a portable 64-bit with 4 GB of memory installed. The windows version is Vista 6.0 (build 6002 service PAC 2) part of the text is mixed and sometimes unreadable.  I tried the compatible function in Explorer 8, but it helps a little.  Is this version of windows, a 64-bit version.  I can't find the answer anywhere. Thank you

    * original title - display of text involved Vista *.

    For those who may have a similar problem, this has been fixed by IE 8 to delete and reinstall

  • I have a problem with the settings of Internet Explorer.

    Original title: inter explore crashes me to use internet Dungeon putiing internetexplorersecurity windo clubfoot it get stalled and I must go to controlalt and delete to delete

    cannot open Internet anthing box-internet explore security reappear will let me not control one of the boxes he's loose and I have to go to control the alt and delete task to delete or close internet please help me solve thi question I can not open before anything else without popping up the window

    Dorothy salvation,

    1. what version of Internet Explorer is installed on your computer?

    2 is the issue limited while accessing any particular Web site?

    This problem can occur because Internet Explorer or modules settings.

    Try the following and see if it helps.

    Method 1:

    I suggest you to disable the popup blocker and check if it helps.

    a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

    b. click on tools, click on pop-up blocker and then click block pop-up windows settings.

    (c) in the address of website to allow box, click the Web site that you want to remove from the list and then click on remove.

    d. Repeat step C for each Web site that you want to remove from the list of Web sites that display pop-up ads. When you are finished, click Close.

    See the following Microsoft article:

    Blocker Internet Explorer: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Internet-Explorer-Pop-up-Blocker-frequently-asked-questions

    Method 2:

     

    I suggest to reduce the levels of security of Internet Explorer and check to see if it helps.

    Change the security settings for Internet Explorer: http://windows.microsoft.com/en-US/windows7/Change-Internet-Explorer-Security-settings

     


    Method 3:

    If the problem persists, I suggest you to reset Internet Explorer default settings.

    Reset the Internet Explorer settings: http://windows.microsoft.com/en-IN/internet-explorer/change-ie-settings#ie=ie-8

    Keep us updated on the status of the issue.

  • How to display bookmarks as default to the bottom of the left side of the page in Internet Explorer

    How to display bookmarks as default to the bottom of the left side of the page in Internet Explorer

     opens the Bookmarks sidebar or you can use View > Sidebar - Bookmarks to open it. It will stay open until you close it, and if you close Firefox when it is open, it should appear the next time you open Firefox.
    
  • Problems with the pages of models CS3

    My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

    I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

    The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

    If anyone has any idea how it happened, I'd appreciate comments so I do this again.

    If more information is needed, please let me know.

    Thank you

    Hi, Kelly.

    What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

    You work in a defined site? Yes, you are.

    The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

    You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

    Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

    Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

    Beth

  • My Internet Explorer closes and it says there is a problem with the page I'm lking to.

    Please help me, internet explore close sites that I ", in and need me line."

    Hello
     
    I suggest you follow under method that can help you solve your problem:
    Method 1:
    Internet Explorer not responding, stops working, or restarts
    Method 2:
    Second, the problem may be caused by an add-on corrupted in Internet Explorer. To confirm the same, run Internet Explorer in safe modules mode, and check if the problem persists.
    Open Internet Explorer in mode without modules,
    Reference:
    Method 3:
    If the method above does not resolve the problem, then I suggest you to perform an optimization of Internet Explorer on your computer and find the number.
     
    How to optimize Internet Explorer
    http://support.Microsoft.com/default.aspx/KB/936213
     
    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
  • Problem with plugin Select2 and Internet Explorer v8

    Version 4.1.1.00.23

    Hello

    I'm having a problem with the plug-in Select2 and Internet Explorer.

    Field placement is not aligned and the bottom of the fall are not displayed and the browser to hang appers.

    I had a problem trying to anchor a new version of JQuery that Tom Petus help me solve it by adding:

    #HEAD #.

    < script src = "" #APP_IMAGES #jquery - 1.7.2.js "type =" text/javascript"> < / script >"

    "< script src="#IMAGE_PREFIX#libraries/jquery-ui/1.8.14/ui/jquery-ui.js ".

    This is for the page template.

    The screen in IE looks like this: [IMG] http://I61.Tinypic.com/2s0z2mg.jpg [line]

    Can someone help me?

    What other information can I give?

    Thank you

    Joe

    Nick,

    In IE11 turn off "Compatibility Mode for Intranet sites" fixed the problem, but it did not fix it in IE8. The behavior is always the same, as shown in the screenshot. I'll try to talk to my manager to see how upgrade them to IE11 if they want to use IE for this application instead of Firefox or Chrome.  In the case they enhance any idea what to look for in IE8?

    Thank you

    Joe

  • Current problems with windows xp and Internet Explorer e-mail. You want advice

    Problem started when in Internet explorer, I could not send emails. Program would close downm advised by the technical support of Microsoft Windows than windows xp or explore 8 had bad files and needed to do a clean install. Cannot locate the disc for windows xp will have to buy a.  Should I buy Windows XP or Windows 7? What are the main differences > is Windows 7 contains IE and other software as well?

    The tech shared my office and tried to uninstall IE 7 and 8 butcould not completely uninstall. It also reset my settings to the origianl settings, still no luck. The messaging service is hotmail and my wife also has a msn.com address, and none of us can email unless I have disable all add-ons. How can I solve this problem? How can I find out who the module blocked sending emails?

    Well, again, how take you your contact with the tech support person?  In other words, how do you know he worked for Microsoft?

    What default values have been reset?

    What happens when you try to use Hotmail or MSN?

    * It was an attempt to uninstall IE 8 which has failed.  How it failed? Do you remember any error message?

    * Apparently, the attempt to uninstall IE 8 was successful enough to reveal IE 7.  Then, there was an attempt to uninstall IE 7 that has failed. How it failed? Do you remember any error message?

    * What version of IE is now active?

    Assuming that the answer to the previous question is IE 8, you can selectively disable the modules by going to tools > manage add-ons.  If IE 8 running in mode no. Add on solves the problem, I suggest from IE 8 in normal mode and systematically disabling the modules until you find the culprit.

    Alternatively, you can start a new thread in the forum Internet Explorer .  Include your version of Windows XP, including the service pack and the version of Internet Explorer you are using.  You should also explain exactly what is happening when you try to send an email.  If an error message appears, he quotes completely, without paraphrasing.  I suggest that you use a more descriptive title, such as "cannot use Hotmail with IE 8.  In the body, do not forget to explainwhy "do not use Hotmail."

    Yet an another path is to ask for help for Hotmail here: http://windowslivehelp.com/product.aspx?productid=1

  • Problem with the controls volume/internet on my laptop HP HDX 16

    Hey,.

    I have a laptop of HP HDX 16, around the age of 8 months. I keep having problems with the touch buttons that controls volume, bass/treble and the internet. The buttons randomly disappear by themselves, turn on and off Alternatively my volume/bass/treble from top to bottom and my internet.

    I have updated the drivers for the buttons to quick launch without result. I've also just updated my computer to Windows 7, so my Bios is brand new (the problem started before I updated to 7).

    As you can imagine, get my internet randomly stops and for the black volume screen blocking what I was doing and hang my computer is getting pretty annoying. Any help on this would be surprising.

    Thank you
    Printertron

    I also have the same problem. HDX 16, around the age of 3 months.

    I found to do all sorts of updates the driver, uninstall, System Restore (no), and does not help.

    I'm still on Vista, but when I get my kit to upgrade to Windows 7, I had planned to see if it resolved the problem.

    Technical support HP told me that if a recovery does not resolve the problem, it must be delivered to them, and the band of totality quicklaunch may have to be modified.

    I intend to make the recovery during the holiday season.

    Based on the fact that you got your computer 8 months ago, I assume that you have not used an upgrade kit. Which means, I would recommend doing a recovery before calling the technical support because they will just have to insist that you do anyway.

    An interim solution, when the volume control locks your screen is at the end of the process called "SmartMenu.exe". It will reload the next time that you start your computer.

  • Problems with the page numbering

    Hello there ' All!

    I received a few questions about the numbering of the pages:

    1. When the notes are present, they appear over my page numbers (in the lower left corner), which makes them invisible. How to avoid this?
    2. How can I ignore numbering for some pages, as the cover page, table of contents etc. ?
    3. How can I connect page numbers in my table of contents to my actual page numbers?

    Thank you!

    1A, ill-conceived layout? Page numbers should ideally be placed on your master pages, and outside of the margins, you book to plain text (i.e., top, side, or underneath the purple square). Move the frames of page number outside the place of purple Director. If there is no room for this, you need to adjust your margins!

    2. you can 'ignore' the page numbers (they will keep existing), but you can hide them in several different ways. Easier - and more dirty - trick is to put a white rectangle on them (don't do this!). You can also (Cmd) Ctrl + Shift + click on any element on a master page, so "free him" and then just delete the entire frame, with the page number and everything (I wish you didn't do this...). The best way is to assign a new master page to only those pages; a specially created for this purpose (if you have other elements that should appear on all pages), or simply the "[None]" blank page.

    3 search 'referrals' help if you use CS4. You can also search for "Table of contents", it may be useful to regenerate all the content, so the text is up-to-date as well.

  • Firefox uses the page host internet explorer after restarting the PC, even if I change again, it passes every time

    I use a laptop for my work. I have internet explore what is necessary for our things work related and internet intranet explore uses the intranet homepage of our work. I also use firefox and want to use a different home page (IE Bing, google, whatever...). So things work related I use IE, for web browsing of non-working, I use firefox. Recently whenever I reboot my PC and launch firefox, firefox uses my Explorer (working on the intranet) home page internet. I then easily reset on my preference (bing.com) and as long as the PC is on, if I close and Open firefox it keeps bing.com as my home page. I could do this 20 x and it will keep the bing.com homepage. However when I shut down and restart the PC, firefox goes back to the use of the IE homepage (on the intranet of the work). Is there a permanent way to fix this. Our IT Department has been no help. Started a week before what is happening they upgraded our computers to internet explore 11. I tried to reset Firefox but that does not solve the problem.

    Hi hunted, something is change or replace your prefs.js file.

    Maybe you can thwart it by creating a user.js file. This file is read at startup of Firefox and replace prefs.js. Basically, it only needs a single line, if you could open prefs.js in a text editor after you have corrected to the homepage preference, use Save as to create user.js and then remove all the lines and save/close.

    More information on user.js: http://kb.mozillazine.org/User.js_file

  • PROBLEMS WITH THE UPDATES AND INTERNET

    WHENEVER MY COMPUTER DID AN UPDATE AFTER THE UPDATE I CAN'T GO ON THE INTERNET, I HAVE TO RESTORE TO A TIME BEFORE THE UPDATE, ALSO WHEN I TRIED TO DOWNLOAD JAVA AND FLASH, IT WOULDN'T LET ME ON THE INTERNET, NONE OF THE TWO, I HAVE A LAPTOP TOSHIBA SATELITE MAYBE 2 MONTHS OLD CAN HELP ME A FEW

    Hello Felixtorres,

    Method 1:
    (1) try to upgrade your copy of Internet Explorer to version 7.0
    (2) restart your computer
    (3) visit http://update.microsoft.com and install updates of missing security for IE7 & stop and try again.

    Method2:
    There might be some important vista .dll are gone corrupt. Please perform the below steps to solve problems.

    (1) make sure that your account is to have any of course rights or grant your account level "Administrator" rights
    (2) from the command prompt, run the command " sfc/scannow " & provide the Vista installation DVD.
    (3) analyze your system with antivirus & Spyware software to remove infected files.

    Also, visit him following MS KB links advanced troubleshooting.
    http://support.Microsoft.com/kb/947821
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;928228

    -

  • Option 'Open with' prompted with the download of INternet Explorer 8

    Original title: how to download IE8

    I am trying to down load ie 8 on my Dell xps running windows XP. You download in microsoft Download Manager, when I click on the download is finished, it asks which program I want to use to open it? What should I use?

    Hello

    -What is the extension of downloaded file in Internet Explorer 8?

    -Are you having the same problem with other files downloaded?

    I suggest you try these websites and check if it helps.

    How to change or choose the program that starts when you double-click a file in Windows XP

    http://support.Microsoft.com/kb/307859

    Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

    http://support.Microsoft.com/kb/950505

    I hope this helps.

  • Problems with Dreamweaver CS4, and Internet Explorer 8?

    I'm on iMac with a site Dreamweaver CS4 that most browsers recognize and show, except the new Internet Explorer 8.

    It loads the index page, but all it shows is "FINISHED" or a blank page.

    Is anyoone knows why this is? As a Mac user, I can't Internet Explorer 8, and when I check "compatibility of Internet browser, all the he shaows, it's a single line has"expanded boxes""

    It's a battle of Microsoft/Mac?

    Please provide a lik on the site.

    There is no way we can comment without one.

Maybe you are looking for