Problems with the start of the vi using TCP on a cRIO, error code 63

I'm trying to deploy the 'multiple connections - Server.vi' in examples of TCP & UDP to a cRIO as the startup application. The vi works fine and I can connect with many clients until I have deploy the vi and set it as vi on a cRIO device startup. When the device restarts and I try to connect with the 'multiple Client connections 1(vi)"also found in examples of TCP & UDP, I get"error 63 occurred to TCP connection open. Are there additional parameters that need to be enable to allow TCP as the boot vi?

I don't know that is the question and I don't have an RT target available to test it, but here's a possibility: property nodes sometimes do not work as expected when you run on a RT system without front panel.  In the case of multiple connections - server example, the first thing that happens is that the VI wrote a false value in the property node.  As explained in the link, this has no effect.  For example, if the default value of the control 'Look stopped' is 'True' the top loop will close after the first run, which will stop the VI, probably leading to the error that you see when you try to connect.

To resolve this problem, I recommend you remove the 'Missed listening' control completely and change conditions to stop for the two while loops.  You run a compiled application on RT, so unless you will connect using a remote panel, there is no need any façade including the stop button control.

EDIT: if I have correctly identified your problem, you can vote for this idea: "Warn on the face property node to use when you build a RT".

Tags: NI Software

Similar Questions

  • HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

    HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

    Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

    Sometimes spits out a blank sheet of paper.

    Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

    http://welcome.HP.com/country/us/en/wwcontact_us.html

    Can you please post back to let us know how you go?

    Thanks, Ciara

  • KB952287 is a problem with the module installer and will not install, error code 800706BE

    Hi, I have a laptop Dell Inspiron 1520 with Vista Home Premium. I'm having problems installing SP1 and have identified that one KB952287 that causes the problem. The update causes exactly the same problem. While installing the update, an error message appears that says "Module of Windows Installer has stopped working and needs to close", then the updater freezes and never completed the update. The update log provides the following information.

    Fix for Windows (KB952287-french)

    Installation date:? 03 /? 04 /? 2009 20:06

    Installation status: failed

    Error details: Code 800706BE

    Update type: Important

    Difficulty for KB952287

    More information:
    http://support.microsoft.com/?kbid=952287 .

    I've contacted Microsoft Support on this issue and they could not help but suggest to post here.

    Thanks in advance for any help.

    If you don't want to go in this direction, you should call dell and ask for a replacement recovery media.

    And maybe ask a copy directly from the operating system without any OEM software or all the changed settings. (a copy of the DVD retail)
    See you soon

    Today, it was a good day, I didn't have to use my AK.

  • Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

    Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

    Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

  • Problem with the iPad using kindle app.

    WE have 2 iPads, iPad 3 and the air of aniPad. Nor are working using the kindle App freezes and looks like he's trying to download or open a book. Which of the two in the lower part shows also cloud and who is on the side of the unit?

    Amazon made the kindle app, not Apple.

    If you have problems with the app-contact Amazon Kindle.

    http://www.Amazon.com/GP/help/customer/display.html?nodeID=200298460

  • There was a problem downloading the daily data of challenge. 002000 error code

    "002000 error code.

    I get the following message "there was a problem downloading of data daily challenge. Please check your Internet connection and try again. Please refer to the 002000 error code. "at the opening of Mahjong and Solitaire, I know that the Internet connection is OK other wise I wouldn't post this - I did a search for the 002000 error code and can't find an answer that someone know what is the fix.

    Hello

    1 screen to start other applications work correctly?

    2. you have any software from third-party anti-virus installed on the PC?

    Follow the steps in this article and check if that helps:

    What to do if you have problems with a soft

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    (First run the troubleshooter App)

    For additional troubleshooting steps, see the link:

    Correct the errors that occur in applications of Xbox on your PC Windows 8

    Problems with the daily challenges with some of the Microsoft game apps, take a look at competent instances Xbox here: http://forums.xbox.com/gfw/xbox_on_windows/l-o/f/3066.aspx

    Let us know the result. If you have any other questions, we will be happy to help you.

  • Problems with the audio using Hulu on Apple TV

    We meet a few important issues in streaming Hulu through Apple TV. The problem is with the audio. When we start a new episode of a television show, frequently, there is no audio data. The audio plays fine during the advertising leading up to the episode, but then he went to the start of the episode itself. Last night, for example, we tried to watch an episode of Casual. No sound. I restarted the same episode 3 times (which meant, annoyingly, I had to attend the same ad 3 times), and each time it was audio at the announcement, but then no sound during the episode. I unplugged Apple TV, wait a minute and plugged in. Choose the same episode and had the same problem.

    Before last night, we were sometimes able to get audio on Hulu content, but it is seldom worked without similar problems - there is no audio data, or sometimes there will be audio briefly but then it disappears. We will not experience this problem streaming other services by the Apple TV, such as Netflix, HBO or with iTunes media. Any advice?

    It is a second generation Apple TV, purchased in September 2010.

    Exactly the same problem with Hulu here on ATV2. Its been like that for months and only getting worse. Also, randomly that it recharges during playback. If you can spend the first few minutes of couple of a show (by the start/stop several times) it will play the rest of the show OK.

  • Problem with the Gateway using Vista laptop battery

    Hi all

    I've had this laptop Gateway for a year now and I have had this strange problem with it probably a good 3 months to own. Basically the little thing of battery indicator on the bottom right of the task bar will say "plugged in, not charging" while the laptop is plugged. So this is my little ghetto rig which leads me to believe that is not the battery or the charger which gives me the trouble.

    While the laptop is plugged in, and moan about there is no life left blah blah, I pop the battery and back in. Hop, I magically have full battery and be able to unplug the laptop for mobile use.

    I've read a lot online that it is a Vista problem, that I am running, and not a hardware problem. I would really like to know if this is true, because I am a student and prefer not spend the precious material fixing money when this is not the problem. As stated earlier, cell phone charges when it is plugged in, it SAID only that it does not load. When I pop the battery, it works fine until the next time that the battery is exhausted and then I plug it in and have to redo the same platform of ghetto.

    It's just a little a downside to keep popping up that darn battery in and out, and frankly, I don't think it's good for the laptop to keep doing this, even if it's worked for me for about 7-8 months now.

    Can someone please offer information about this weird issue?

    Thank you very much.

    Why my battery portable MD Gateway or Gateway MC series doesn't load at 100%?
    http://gateway-us.custhelp.com/app/answers/detail/A_ID/2624/kW/battery%20not%20charging/session/L3NpZC9UKjJBcnNsaw%3D%3D

    Also in this forum:
    Gateway Laptop: plugged in, does not support
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6db4fe50-D318-44DA-a938-2fc58f4bbe7b
    on one of the post of Leaky.

    I hope I could help

  • Question about problem with the file using a clipping mask

    I use Photoshop CS6.  I bought a digital frame with a mask of clipping on Etsy.   When I go to insert the image in the image using the clipping mask image continues to show through the edges of the image (as pictured).  I tried blocking layer, but it does not work.  Any suggestions?20140925_184509.jpg

    Try this, 2 layer moving below 3 attach them.

    Hang out with the selection tool ellipse a circle that encompasses the area which should show the image

    Create a mask for the form (make sure the shape layer is selected {now layer 2 to 3} click the icon at the bottom of the layers panel that looks like a circle inside a square)

    You should now see your image.

    If you get stuck, you can capture your screen to show your progress.

    Tips for the selection tool:

    You can hold the SHIFT key to constrain to a circle

    You can hold the ALT key to draw a selection of its center circle,

    You can hold both modifier key for a perfect circle drawn in the Center.

    Finally you can hold down the SPACEBAR to move the selection before you release the mouse button.

  • There was a problem launching the program in my windows live essentials .error code 0 x 80004003

    Im having problems with my windows live essentials, it is said that there was a problem launching the program, the error code was 0 x 80004003

    Windows Live questions go in the forums found here: http://windowslivehelp.com/

  • Problems installing the three windows updates KB2698035, KB2761226, KB2727528, error Code: 0x8007F0DA

    I ran Windows repair , but the problem persists.

    some high priority updates do not install automactically or manually in detail below.

    Update for Windows XP (KB2761226) security Error Code: 0x8007F0DA 

    Security Update for Microsoft .NET Framework 1.0 SP3 on Windows XP Tablet PC and Media Center (KB2698035) Error Code: 0x8007F0DA

    Update for Windows XP (KB2727528) security Error Code: 0x8007F0DA

    Hello

    Did you follow the methods to solve the problem?

    If you have not tried the troubleshooting methods, I suggest you try these methods and see if the problem still occurs. Answer us about the State of the question whether or not it is resolved.

  • Problem with the page using the not substituted VO

    Hi all



    I expanded the view object AbsenceSummaryVO of the/oracle/apps/per/selfservice/mgrviews/webui/ManagerViewsPG of the page. I created a new view object that extends the object from view of AbsenceSummaryVO, it contains a few added columns.

    These added through customization, I added to the tab of the absence of columns. The only problem is... that they are not fulfilled. It seems that Oracle ignores the request to be executed instead of the old one (old data appears perfectly). One of the current columns also changing a value hardcoded still looks like the old value (data base).



    When I look in the MDS repository, I can see the substitution is deployed, remove also the XML necessary for replacement of the filesystem is Oracle generates an error.

    Below the output from the MDS repository:

    ---

    <? XML version = "1.0" encoding = "UTF - 8"? >

    < customization xmlns = "http://xmlns.oracle.com/jrad" xmlns:ui = "http://xmlns.oracle.com/uix/ui" xmlns:oa = "http://xmlns.oracle.com/oa" xmlns: user = "http://xmlns.oracle.com/user" version = "9.0.3.8.13_1566"; XML: lang = "en".

    Customizes = ' / oracle/apps/by/self-service/mgrviews/Server/AbsenceSummaryVO ">

    < replace with = "/ xx/oracle/apps/by/self-service/mgrviews/Server/AbsenceSummaryVOEx2" / >

    < / customization >

    ---



    When I look at the page on the business components used, I see the substituted object seen used. However it does not appear in the substitute for the table column, but in a 'normal' line The original view object (AbsenceSummaryVO) is missing from this list. I find it rather strange.



    Everyone recognizes this kind of behavior? And what to do about it?



    Kind regards



    Patrick

    Patrick,

    You must extend AbsSupHrchyVO instead of AbsenceSummaryVO.
    Although this page mentions that AbsenceSummaryVO is used for the columns it ignores changes to this VO.
    I expanded AbsSupHrchyVO on a test instance and added a few custom columns and they appear in the Absence sub-tab (/ oracle/apps/by/self-service/mgrviews/webui/AbsSupHrchyRN) now.

    Kind regards
    Robert

    Published by: robert.jungerius on March-24-2010 09:38

  • Problem with the lines using the printer power module

    Printing from your computer or copy it using the bed of glass is very well, but when we use the document feeder, we get dark vertical lines. I cleaned the glass and the rollers I could have access, but it is not improved. Any suggestions? Thank you.

    Glad to hear that you're back on .

  • My new game Halo2. Problems with the installation. Windows live rejects my product code

    • My game of Halo2, when it is installed on my windows 7 has trouble with windows live operating system... it rejects the code produce, what should I do? He says it's an invalid code... I checked with ms is a valid code.
    • .The game bought at microcenter of ny... they said it would work to install on os 7. Home and wouldn't install... perhaps said to use dedicated server?... he got up... Download up to date and restarted microsoft for windows games and this menu time came up asking if iwanted to play... I touched the game and there... and expected to start press any key... then I hit a key... and windows live displays and demand for my product key, I have activated the game with more early... so I typed in... and he says it was a product key invalid... spruced up several trys... and no luck... still says invalid product key... Try again... I called microsoft support line... we checked the product key... and it is VALID. ???. but they do no more than halo 2 support... Although she was told to go here... and here I am asking for help or I have to return the product to the store.
    • OH that a new never installed game before...

    http://support.Microsoft.com/GP/games-for-Windows

  • I need help with the following updates. I get an error code "646".

    Update of security for Microsoft Office 2007 (KB951550)

    Update of security for Microsoft Office Excel 2007 (KB978382)

    Update of security for Microsoft Office System 2007 (KB951944)

    Update of security for Microsoft Office System 2007 (KB978380)

    The 2007 Microsoft Office Suite Service Pack 2 (SP2)

    Update for the junk e-mail in Outlook 2007 (KB979895) filter

    Update for Microsoft Office System 2007 (KB967642)

    Manually download each update here:

    IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB951550&displaylang=en&stype=s_basic

    and install the same.

    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for