Problems writin to spreadsheet
Hello again. I'm playing with standard equipment and try to get it to write data to a .csv file. I enclose my play test. I am able to write however, everything he writes is '0', when I look at the device change values. I'm trying to figure out how to get the actual data to write on the spreadsheets, and their filling of a column insttead, I would have preferred it spread across the row. Thank you
I'm sorry my attempt to write clearly didn't so badly. Here is an excerpt that wrote a spreadsheet (and the bed to show you what has been written). 5 rows of 3 columns of random data. The worksheet calculation has a header row with column 1, column 2 and column 3, and the data are written one line at a time on the same worksheet. There is a loop For with a rating of 5 is the loop "Generate and save the data" - it might be a while loop controlled by a command to stop. 3-indexee for loop before entering the loop of the Acquisition is to generate and write the three column header row. When exit us the loop of the Acquisition, we can read the worksheet to make sure that it did what we wanted it to do.
So my question is, did you try to make it work? You should have been able to concoct this little demonstration yourself program. If you have problems with something in LabVIEW (like understand how to write on the worksheet works), it is much easier (not to mention the faster and more fun) to not try to debug it inside a much more routine where a lot of things is underway. Write a tiny demo (as illustrated below) program that tests everything you try to understand. If it doesn't work, read the help of LabVIEW, experiment with the settings and if you go to the Forum, post the small demo routine.
When I went to publish this code snippet, I forgot that I had responded to a similar question in the Forums about two weeks ago. There, I've included how to an Excel workbook, but also a "Spreadsheet" LabVIEW It's here (very similar, of course...).
Hmm - looks like I forgot to put the file specification in the part of write-to-worksheet for this example...
Bob Schor
Tags: NI Software
Similar Questions
-
The problem of the spreadsheet table
Hello everyone
I have a picture of worksheet to write my data into an excel file of the DAQmx which measures the pressure, but I get too much data under the measure. Anyone know how to get rid of it, because I want exactly the same as my 2D array data in the excel file (one measurement every second).
Thanks in advance
Orlando
-
Problem using: read the spreadsheet file
Hello
I have 2 problems with reading spreadsheet file:
(1) for the use of .txt file I can get the first column and not the other (even if I chose the correct output...)
(2) this does not at all when you use my .xls file
I must do something wrong but can't find what...
Has anyone an idea?
I have attached the .VI and my two files.
Thank you
User
A native Excel file is NOT a text file. It is a format of custom file created by Microsoft. This is why you must use ActiveX to interact with him.
The worksheet ' ' folder features found in the work of LabVIEW with text files (delimited by tabs, CSV, etc.). The text files are a format more generic that can be read by programs such as Notepad. Tried to use Notepad to open an .xls file? It does not work. Excel can open a text file, because it is a generic format.
So even if everyone automatically thinks "Excel" when they see the word "Spreadsheet", the two are not synonymous. In the case of LabVIEW, 'Spreadsheet' made reference to a delimited text file.
Who is?
-
Model of correspondence with null characters
Hello
I use LabView 2010 and want to write a VI that a spreadsheet file (txt) is important in a table and passes then through the lines and seeks expressions.
Problem:
"The spreadsheet file read" vi generates unnecessary spaces and empty lines and data apparently contain null characters, so that the expression of 'regular' correspondence vi only returns errors.
What is a null character and how do I get rid of it and how to import the text properly without extra spaces and empty lines?
Thank you.
Original text file:
Text imported into a table file (note the spaces and blank lines):
VI:
Reading in a file as a string? What about the right to function in the same palette that your function to read the file worksheet that you found?
And manipulation at the level you need to do here is probably better made to convert the string into a byte array and using table functions. Then convert it back later.
-
Windows Vista - my worksheets had icons for word documents or installation of programs icons
When starting my computer, why Office five of the six albums icons for spread sheet documents appear as icons for word documents and the icon for the sixth broadcast sheet paper appears as one of an executable program? My computer is infected?
Hi VidaFenton,
(1) remember to make changes?
(2) is this problem limited to spreadsheets?
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: If you suspect a virus infection, run Microsoft Security scanner (MSS) to any threat and try to correct
http://www.Microsoft.com/security/scanner/en-us/default.aspx
If the question is limited to spreadsheets, you can post your query on Office Forum
Office Forum
http://answers.Microsoft.com/en-us/Office/Forum/office_2010-office_other?page=1 -
Problem with creating a spreadsheet file
Hallo,
I want to save data from data acquisition to a spreadsheet file. To get the data into a simple txt file is no problem. But, as the "Array to a spreadsheet String" vi (see attachment), each 2nd line is empty. A I forgot something, or is this the right method for simply protocol data in a txt file?
Hi deepearth,
I understand your problem. This is the VI. Here the EOL is eliminated. I hope that this VI works for U.Let me known if yes.
-
Currently I have a financial spreadsheet I had to create for my work. One of the cells does not calculate correctly. I need for the cell to use calculation Total - Total balance = balance. I used abbreviations in the cell itself to the formula so I know this isn't the problem. The poor figures will calculate in the cell. I find that I have to delete the wrong number, and then in another cell. Once I click in another cell that will fill out the right balance. I would be fine with that, but my boss is not ok with having to perform additional steps. Can someone help me?
It sounds like a problem of calculation of field command. Access the form Edit mode - calculation order of field tasks - more - and make sure that the field of the Balance is under the other two fields in the list.
-
problem after running with spreadsheet report
Hi evry one
Thers a problem after running with the spreadsheet report.
After runing iexplorar open and close quickly no else
When I check the work of successful professional appserver with say spreadsheet.
what I'll do.
Thank you.Hello
Do you use the internal order of Oracle Forms WEB. SHOW_DOCUMENT?
If Yes, take a look at: "IE7 windows opened and closed immediately.
http://www.experts-exchange.com/software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
You can test the suggested solution:
We found the framework we needed, in the Internet Options
Security tab, if you select the internet zone, then click Custom level
button, then scroll down to the downloads section, the first option is
Ask confirmation for file downloads, set this to allow Guard IE 7
to interfere with this kind of download.Concerning
Example with screenshots:
http://www.Celt.iastate.edu/WebCT/SecuritySettings.htmlConcerning
-
Problem by querying the Excel XML spreadsheet (namespace)
Hello
I have a file of Excel (2003) recorded as XML spreadsheet that I wish I could query in the database (10 gr 2) using extract/extractvalue. Somehow, the definition of this file namespace is preventing me from reading the values in the file. The excerpt/extractvalue function returns empty values (NULL). Can someone help me with an example how to query individual nodes in this file?
Here is the query/XML:
Thanks in advance,WITH x AS (SELECT HTTPURITYPE ('http://www.dataliberation.nl/newnxl/docs/F2083/xmltestsheet.xml').getxml () xmldoc FROM dual) select extract(xmldoc,'/Workbook/DocumentProperties','xmlns="urn:schemas-microsoft-com:office:office"') doc_properties , extractValue(xmldoc, '/Workbook/DocumentProperties/Author') author from x
ChristianI originally written/tested on 11.1.0.6, but I just it ran cleanly on 10.2.0.4 as well.
-
problems with the Excel spreadsheet
Windows users are reporting a spreadsheeet Excel document I put on our site is crushed up and down, otherwise, you can see half of the top line and then the next line straddles it and so on. This does not appear on any of my browsers (firefox, safari, explorer 5.2) so I can't really trial and error question. It apparently only shows on the explore Windows browsers.
I put a document the following Excel: in excel doc saved as a web page, a page opened in DW, copied enitre doc and pasted to the new basic html page in DW.
What Miss me? How to fix this?
DW MX on Mac G4, 10.4.8 466 runningHe already corrected. Looked in the manual of all places. Xls was saved as delimited by tabs imported text, tabular data, presto! All right.
-
Hi all
For a job/hrs. paid should I fill out my information in an excel spreadsheet.
As soon as I get a number of hours worked in say D2 a triangle of red error appears where there is a formula that is not happy.
The error says "Argument 1 of the TOUR expects a number, but the cell contains a date." Even if the cell in question has requested an hour in 15:00 format I entered. ???
The second thing is that the spreadsheet I use was sent to me by a PC person who says I use an older version of the form and that is the problem. However, I use the updated version, she sends me every time, by clicking on it with the mail to open in number. For some reason, either at the end or mine numbers back to the original version of the document when you open or save after I have sent him filled form. Or some other Voodoo that happens.
Is there something I need to do on my end when export to ensure that it exports to the version that I just opened? Figures has a bad memory or something?
Thanks for any idea,
Al
It would be useful that you could provide details, perhaps even the real formula! "
Excel and numbers to deal with date and time values differently. Each method has its own advantages. The differences may be causing your problem.
If you work frequently with users of Excel, you can consider using Excel for Mac. Although numbers can import/export from/to Excel it is not designed to be an Excel "clone".
Meanwhile, according to the formula that gives your problem and maybe there is a quick fix that works in your case.
SG
-
My systems include the MacMini, MB Air, Pro MB [all 2011] on OSX 10.8.5 Mountain Lion, with a MacMini extra [2011] with the help of El Capitan (for the purposes of the trial) as well as an iPadAir2 and an iPhone - both on iOS 9.
I joined the eco system (from Windows) Mac to Snow Leopard and fortunately this used for all my needs. moving through the Mountain Lion and Lion (quickly), where I is a happy user!
Failure to make progress in terms OSX is the result of...
- my extensive libraries of pictures were worked on - and are still being held in - iPhoto ' 09 (8.1.2) - which met my needs exactly - I have many albums which photos should be sorted manually - that is to say, not by Date, the former/Newest or title! So, the current Photos app does not work as well for me on for my Scrapbook sort, although apparently it allows the movement only photo by mouse?
- I made 'heavy' use of iCal using many individual alert entries (!) of my choice as to the date, time, etc. and not very limited alert options offered by the newer versions (iOS-like) to iCal, where I use the alert custom-making every time! I avoid editing or for alerts in iOS 9 because o f the limited options available.
- I am a user passionate worksheet and delayed moving on numbers of Excel. I moved platforms for Cougar and live joyfully on numbers now with stored copies online as well.
Tempting to work in El Capitan, I am "forced" to spend my worksheets to the most recent numbers app when I come to save and cannot then use the 'improved' version recorded on my systems of Mountain Lion (where I still pure copies!) -similar events occur when you use Pages; the lack of recoil connectivity is a major drawback for me that I apparently must keep OSX Mountain Lion to use my key apps 'base' to meet my needs!
Are there workarounds 'smart' (or applications) that will overcome all (or part) of these "disadvantages", allowing me to good progress and update on El Capitan OSX (and Sierra at the right time)?
I have to start using a different calendar system to have the usable alert options (which deviates from the eco system) systems on the scale?
Should I go back to using Windows Excel (or Online) to my spreadsheet to have facilitated cross-OSX usage?
Thank you.
On applications of numbers and Pages, there is a real problem if you need backward compatibility - alas, I don't have a solution for you.
But I do not understand what limits you talk in calendar alerts. I can add events and alerts for them in El Capitan (and now Sierra) using the same methods that I used in previous versions. I can receive messages, sounds or emails in any number and both custom of my choice. Can you serious? Maybe post screenshots of before and after? I'm not available for the comparison of older systems. There are indeed limits if do you the same thing in iOS, but AFAICT not on the mac - and, especially, the alerts personalized on the mac are correctly transferred to the iOS device that I use (an iPhone), to my first mac.
-
Numbers are perpetually my 18MO spreadsheet calculation. All solutions?
My spreadsheet numbers was good up to that point.
After that I added in other new formulas, it happens suddenly.
I thought that by removing some unused leaves, it could improve, but nothing has changed.
Even back on my mac has not helped.
Any suggestions? My numbers worksheet is 17.8 MB and I'm running a MBA 13 "mid-2013 with a processor 1.7GHZ Intel i7, 8 GB memory and 13 GB of free space on HDD.
Hi tl,.
Numbers are not designed to handle large volumes of data or large tables. It is specified the maximum size is 255 columns by 65535 lines, but it will become unusable long before they reach the limit of the lines. Part of the problem is that the numbers automatically recalculates each change to a table, a feature that cannot be disabled.
I did a little test with one piece of sheet with four tables, each 9 5112 lines columns, as well as a single-column table 10 lines.
Large tables had the same formula in each cell: = RAND () * 100
Each cell also had four rules of conditional highlighting that filled a color that depends on the value in the cell in the cell.
The smallest table had formulas allowing to find the values of minimum, maximum and AVERAGE in four large tables, as well as the SUM of the values in a table and a count of the number of times the minimum value in one of the tables occurred in another tables.
Calculation was triggered by activating / deactivating a checkbox and took about 24 seconds to complete.
The size of this worksheet when recording as a file is 7.1 MB.
For large files, numbers are not the best tool. Try one of the office applications open source (LibreOffice, Apache, OpenOffice), or MS Excel.
Kind regards
Barry
-
Hello
I have a Macbook Pro with Office 365, installed at the breast and it works fine.
When I select a single cell in Excel and try to drag it does nothing, I thought it was because of the scroll, but it does not help, nobody knows what is the problem?
Thank you
Mark
As far as I know you can't drag a cell or group of cells. If you do slide into a spreadsheet, a selection.
-
Recently, I noticed a very strange phenomenon in Firefox. I first noticed in Google Spreadsheets; text does not appear in the cells, but if I bring you a specific cell for editing. I thought that this limitation the new Google Spreadsheets, since the former Google Spreadsheets work again normally. It's just new with this behavior.
However, I quickly noticed that PDF files open in Firefox exhibit the same behavior. The text is not white; It is completely transparent, as it is not at all made.
HOWEVER, if Firefox is not the point, AND a text is selected, the text renders in the selection. Posted: http://imgur.com/bWWLvLr
ClearType in Windows does not seem to affect it, nor appears to be of my addons. even in safe mode, the problem persists.
This problem is not present in Windows Internet Explorer, so it doesn't seem to be my system.
I would be grateful to solve this problem, as I make frequent use of Google docs.That's the answer, cor - el, but it does not solve the problem.
EDIT:
The problem had been solved, but I was not sure what he did. It reoccured recently and I decided to investigate a little more. He seems to have had a problem with my GPU (AMD Radeon HD 6950). Update the drivers (even once, since they had been cancelled for some reason any) has fixed this problem. The previous version of the driver that had this problem was 14.4
Maybe you are looking for
-
How to keep informed of future versions of Firefox (via electronic update)
I would like to know when new versions are in Alpha or beta. Is there an email list that I can register?
-
I cannot connect hp pavilion labtop 2000 fx for I - Phone 3 16 GB via blue tooth
I cannot connect hp pavilion labtop 2000 fx for I - Phone 3 16 GB via blue tooth and not even with connection cable USB
-
Microsoft Optical Desktop with Fingerprint Reader 114Key keyboard
Anyone know if Microsoft Keyboard with fingerprint reader works with windows 7. Microsoft will make windows 7 drivers available for this product.
-
We have bought just 6224 2 switches but neglected to buy the parts stacking. Can I do 802.3ad (aggregation of links) through the switches without stacking connectors? (Plug 1 cable into each switch and have a trunk between the two) And if it does not
-
If I already have a teacher and student account creative Cloud can I also use mobile applications
If I already have a teacher and student account creative Cloud can I also use mobile applications