process to increase the RAC sga

Similar Questions

• Adobe Illustrator CS6 don't allow me to change the weight of the race

  The one having the same problem? : I'm trying to reduce the stroke of 1 pt .5pt in Adobe Illustrator, and he does not accept the command. I can increase the race from 1 pt to 2pts however. This isn't a problem in CS5.

  DD,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Increase the priority of the process for the critical elements of RAC

  Y at - it a method or command which can be used to increase the priority of critical components of CARS? Kel interconnection, access to records with the right vote, etc.
  
  The UNIX "renice" command is curious. Does anyone have experience on this subject? Any help is appreciated.
  
  Thank you
  Jarred

  You must set a number of things before anyone can help you. Here is a short list of items that come immediately to mind.

  1 platform and operating system
  2. oracle version number
  3. set 'critical' and name a few of the components you are talking about.

  You cannot prioritize on the rest of the traffic interswitching traffic nor should be no reason to do it, if you read the documentation and followed the advice of the Oracle.

  The only thing I do not recommend, if you have the hardware and the operating system and can establish a need, is to pin the LMS to a dedicated processor.

• Increase the speed of improvement process - R12 with 12.1.0.2 Post

  Legends of dear,

  We are upgrading a database 10.2.0.5 to 12.1.0.2 R12.0.6. using dbua

  -The pre - upgrade processing time is 30 minutes or less

  -The upgrade process is 2 hours 10 minutes

  -Upgrade Post is almost ran for 7 - 8 hours - > how to reduce this time or speed up this process.

  I kept the

  job_queue_process to 1000

  SGA - 2 G

  PGA - 1 G

  Are there other settings to optimize the upgrade of point of view?

  The process upgrade done Post INVALIDS and for an hour, is validate near 10000 objects. Y at - it another way to reduce downtime. ? 36 hours is the maximum time that I have.

  Thank you

  Knockaert

  So prod can I increase the parallelism greater than 4 to 12 right? Or is there a recommended way?

  Yes, it should be faster on production with this number of processors. I don't think that you need to change the number 4 to 12 as DBUA is smart enough to detect the number of processors and parallelism will be set to default 12.

  You don't want to risk going with the largest number since it is the production, if you had a similar hardware, where you can try this on a cloned instance then fine but otherwise I would personally stick with the maximum suggested by DBUA.

  Thank you

  Hussein

• increase the SGA in Oracle 10 g

  Hello world
  
  I'm Ann. I'm not a DBA, because the senior DBA and developers is on maternity leave must step up to dealing with reports and an Application of Oracle Forms and Oracle database (version 10.1).
  Recently, the complaints of the apps people is slow.
  So I open the Enterprise Manager and check the performance Advisor, it shows a question
  Find the buffer cache is too small, causing some additional important s in reading.
  Impact (minutes) 5.31
  Impact (%)
  13.13
  The recommendation is target SGA size increase by increasing the value of the parameter "sga_target" by Mr. 928 (there is a button next to the message implementation).
  The path of results is
  The buffer cache is too small, causing some additional important s in reading.
  13.13
  
  Wait for the class "user IO" consumed time important data.     16.27
  
  On the server, we use OpenSuse. I also connect to the server as root.
  Type the command free to get info on memory and here are the details
  Borg: ~ # free
  total used free shared buffers cached
  MEM: 6101512 6001288 100224 0 180376 4636256
  -/ + buffers/cache: 1184656 4916856
  Swap: 12586916 1728548 10858368
  
  
  I just want to know is is it safe to run the implement to increase the SGA size target.
  I know I need to stop and restart the instance.
  
  Thank you very much
  Ann

  >
  I just want to know is is it safe to run the implement to increase the SGA size target.
  >
  You shouldn't do anything until the

  1. you confirm that there is, indeed, a problem

  2. you determine exactly what is the problem

  3. determine the cause or causes of the problem

  4 identify. you and classify, possible solutions to the problem

  5. you test possible solutions in a text/dev environment to make sure that your process works as expected.

  6. you script a method to 'Cancel' the changes you make
  >
  Recently, the complaints of the apps people is slow.
  >
  So what! People always complain that the apps are slow. While it's good to take note of that do not have a reflex reaction to it.

  Gather more information.

  1 slow down what? data entry? running reports? batch?

  2. slow when? first thing in the morning? in the middle of the day when users are on the system? All the time?

  3 How long have you slow? It all started? A few days? a few weeks ago?

  4. that means the main DBA say about the slow reported? You have called to ask? Why not? They are on maternity leave not climbing the Alps or the Himalayas. Call them and ask them they were aware of the reported problems.

  5. have you asked the Chief EXECUTIVE what should you watch? Why not?

  Tell us more information. What are the parameters of memory now?

  Open a sql * plus the term can run and view the results of
  1. ENTER THE PARAMETER SGA_TARGET

  2 SEE THE SGA

  3. SPECIFY THE POOL PARAMETER

• increase the number of processes

  Hi gems... a very good evening to you all...
  
  Our system is being upgraded and we test our application by increasing the load...
  
  The process of setting is set to 300 in our database(11gr2)
  
  Now because of the enormous load when I ask the County of v$ process is often moving 298 or 296
  
  That's why when new users try to connect to the database, then they receive the error
  
  Oracle is not available
  Shared memory realm doesnot exist
  
  So I think I have to increase the process... am I right?
  
  Another question:
  If I increase the number of processes, then I should increase the distribution of memory?
  the SGA is currently 8.5 GB, and automatic memory management is enabled.
  
  
  Help, please... Thanks in advance...

  Hello

  user12780416 wrote:
  But should I increase the SGA?

  I guess it depends... ;-)
  Each database with a different load profile, I would say that increase the parameters of process/sessions and monitors performance through awr/statspack.
  I suspect you will not need to increase the SGA, but rather to calculate with an increase in the PGA size, given that the SGA by definition is shared between the server processes, but is not the PGA Tour.

  But the real answer is an AWR report, change settings, load and then do another AWR report and analyze the differences in behavior.

  HtH
  Johan

• How to increase the processing speed by connecting to another computer via USB - USB cable

  Share laptop processing power. Windows 8, Windows 7

  Hello

  I was wondering if I could increase my processing power by connecting a portable alternative to mine via a USB to usb cable. If anyone knows how I would go to do that, or if it is possible I would like to know. I searched on google but not found all the answers.
  If this can help, my laptop is running Windows 8 32-bit preview developer, and the portable alternative is running as Windows 7 Ultimate 32 bit.
  Any help would be greatly appreciated.
  Thank you very much
  Mike

  Hi MichaelSenior,

  You will not be able to increase the power of a computer processing by connecting it to another computer via a USB cable or by any other means.

  In order to increase the processing power of your computer I suggest you check with your computer manufacturer to see if you can pass any hardware on your computer.

  Example: Increase the size of the memory on your computer or upgrading the processor etc...

  Hope this information helps you.

• I racer Ferrari 1000, right key is damaged so I can't increase the brightness of my screen.

  I racer Ferrari 1000, right key is damaged so I can't increase the brightness of my screen.

  I'm glad that you guessed it work.

• Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications.

  When I start my laptop I get "your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications. "and my laptop takes forever or does not open my programs. any help? Thank you.

  less than low disk space,

  What seems to be the case, it's that your windows is having a hard time resize its file for virtual memory.

  my suggestion is to remove "auto" at that time, and then set a custom format.

  I recommend that you set the initial size of 2 and max at 1152.

  Here's how to put a link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• Unable to increase the SGA in linux x 86

  Hi all

  Oracle 9iR2

  Linux x 86

  I'm unable to increase from 1.8 to 3.5 GB SGA am getting error below. Please suggest me.

  ORA-27123: unable to attach to the shared memory segment

  Linux error: 22: invalid argument

  Additional information: 1

  Additional information: 1966088

  / proc/sys/kernel/shmmax: / 3 GB, I tried to rise but not luck...

  Thank you

  Sam.

  sam995972 wrote:

  Thank you all...

  its 32-bit, this means no chance to increase the SGA by increasing the kernel parameters? is this correct?

  Oracle on Linux 32-bit can be used up to an LMS (if I remember correctly) 16GB. You start the PAE kernel, and then configure your cache with use_indirect_data_buffers and db_block_buffers. Your pool will always be limited (even once, I forgot the details) to something less than 2 GB.

  Takes back me a few years.

  --

  John Watson

  Oracle Certified Master s/n

• Increase the weight of the race of certain paths in a trace

  I am trying to increase the weight of the race of the outer circle on the side of a compass diagram. For track most of the outside circle has been placed in a compound path with other paths (circle inside and star) which I want to maintain weight. I would be grateful if I could get some tips how to on this subject.

  

  you want to maintain that sort of look like imperfect?

  If this is not the case, just a new circle to the desired weight would be simpler to design. If you do, it is difficult to suggest a particular thing. Maybe a brush rags?

• Increase the number of simultaneous processes of Standard Manager

  Hi guys,.

  How to increase the number of simultaneous processes of Standard Manager from 8 to 12?

  Oracle Applications 11i

  Database 10 g

  HP - UX OPERATING SYSTEM

  Thank you

  It depends on how your system is used (number of users.., the number of applications, number of CMs and process, etc).

  You must try it yourself and see how your application behaves if you notice any performance degradation, so you should be good to keep the new numbering.

  I also suggest to review the following documents.

  Simultaneous treatment - CP Analyzer for E-Business Suite (Doc ID 1411723.1)

  Simultaneous treatment - platform generic competitor Manager Questions / answers (Doc ID 105133.1)

  EBS - technology field - Webcast recording ' E-Business Suite - competitor Manager Performance - best practices"[video] (Doc ID 1367676.1)

  Thank you

  Hussein

• Line move when I increase the weight of the race

  Hello
  I use dashes in a document. I have a series of lines that are centered on the grid lines; However, when I increase the weight of the race, the line moves as if the upper part of the race is anchored and not the center of the line.

  I am unable to find any setting to change this, but it's really make my job difficult. Can anyone help with this?

  Thank you!

  gleake,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

• bizarre distortion of the shapes when the increase of the weight of the race in illustrator

  In Illustrator CS6, when I increase the weight of the race of an object - for example an Octagon, as I increase the weight of the race, the object deforms more. What is the reason for this and how can I stop it from happening? This is a common problem I've met several times now. It is very annoying.

  Turn off the infernal Snap To Pixel Grid option for the object. Also disable it for new objects.

  JET

• Increase the SGA on the database with dataguard

  Hi all
  
  I have a (10.2.0.2.0) database configured with dataguard and we want to increase the SGA. We want to upgrade the RAM in the server (Microsoft Windows Server 2003 R2 Server 5.2 Service Pack 2 (32-bit)) with double (actually 8G) RAM memory:
  
  The steps would be next? :
  
  -SQL > alter system set sga_max_size = 16G scope = spfile;
  
  -SQL > alter system set sga_target = 16G scope = spfile;
  
  -immediate cessation;
  
  -Start;
  
  Even in the database pending?
  
  Thanks in advance.

  Yes - it will not break the day before, but you should note that failover or crossing - new primary school will have one less memory allocated.