Profile switcher for 29?

Similar Questions

• Why can't change my email address in the profile change for communities?

  Why can't change my email address in the profile change for communities? I won't be able to get the email with the former in the future.

  Because the e-mail address is connected to your Apple ID, which is used to connect to the CSA. You must change the Apple ID.

• What is the best HDMI switch for use with Apple tv 4

  What is the best HDMI switch for use with Apple tv 4. I heard some do not work and the automatic switch has problems because Apple tv is still using power?

  I installed on a cutting and not because the automatic switch works because it isn't always. It came with a remote control that is almost as good, so don't mind the fact that automatic switching does not work well. The reason why I chose cutting is because it was the first device that gave me the good picture and sound quality with my AppleTV, the Xbox 360 and the PS4. (Don't ask!)

• What is the upper part of the mouse X 5000 small switch for?

  I just got a HP X 5000 wireless mouse and it has a small slide on the top behind the switch. What's this switch for it please?

  Hello

  There are a few guides/manuals on the following link, you can try it yourself.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults/?lang=en & CC = US & sp4ts. OID = 5164323

  Kind regards.

• Set up a user profile specifically for the game

  Hi all

  I installed Windows 7 (64-bit) and use it mainly for work (Excel, SPSS, Word). I also have many programs start automatically with Windows and run as background processes. What I want to do is create a profile user who loads only minimum programs and services required to play video games. Currently I have to manually complete the applications and services, which is a pain in the thigh. How can I configure a user profile specifically for games?

  TYIA,

  Mark

  Hi Mark,

  You can create a new user profile, but you will need to put your computer in a clean boot for the new user account only State to play games and to disable applications/services that are not used frequently.

  New user account will inherit all startup applications and services of the administrator account.

  To create a user account , follow the steps in the link
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  To put your computer in a clean boot State, follow the steps in the article.
  http://support.Microsoft.com/kb/929135

  Aziz Nadeem - Microsoft Support

• New DC 2012 creating profiles the for all members of the AD

  I recently deployed our first DC in 2012. I am now noticing that it seems to be a local profile created for each Member of AD (most of them have never connected directly on the local machine). We do not use roaming profiles. This is not the case on our 2008 domain controller. In the applet in the user profile, all these profiles appear as (except those who actually have logged on locally). Each of these people has a folder in c:\users named with the name of the AD account.

  Is there a setting that I messed up during the deployment? What is a 'new' DC in 2012? Can I safely delete the local profiles of the domain controller? Help... (google is not)

  Thank you

  Andi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Administrator log - on: can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write to * address email is removed from the privacy * for your answer.

  Steve

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write toEmail removed privacy for your answer.

  Steve

  Let me soce entry details:

  1. all computers need to have at least one administrator account. It will not work without it.
  It does NOT, however, create a profile For YOU defaultAdmin. It belongs to the user or the owner to create and decide who is Admin, and who is a regular user.
  2. even an admin account will not get to install and change the settings automatically. UAC (user account control) always appears to ask for confirmation of the task by clicking on continue, or by typing the admin password.
  3 be the main user is not to be an administrator. It is up to the user/owner of the computer to be configured as such.
  That said, now my question... How do you know that you're not an admin?

  t-4-2

• Implementation of QOS for on multiple switches for two VLAN

  afternoon all that I was looking for a little help in configuring QOS for two local area networks VIRTUAL, I created. These will be for voice traffic vlan 22 and traffic video vlan23. I also have three other VLAN for pc, wireless devices and our cnc machines. We have 5 switches which are all SG30028P with a single switch making the intervlan routing (Layer 3-powered). all switches are resources shared by the main switch and ive been through the guide written on how to do it on a single switch, which I think is layer 3.

  could someone help me with what I want the video and voice to take precedence over the rest of the traffic

  best regards Patrick

  Right, this way, you can give priority to IP or MAC address.

  No, there is nothing different, only one review of the routing. As the L3 switch can make local routing decisions, the placement of the ACL can vary. In an L2 environment, all packages are transferred to the router, then back down the network to the local destination, so you can clear an ACL on the uplink.

  Since you have a L3 switch, you can practice the same, empty an ACL on the link downstream for L2 switches for all traffic subject to the ACL. Any connection to the L3 switch, you can of course apply an ACL to the uplink router to get all notice of incoming traffic correctly. You can also apply a policy on port source interface to get the note as soon as traffic hits the switch.

  QoS policy is the concept of an ACL, you want it is the closest to the resource. If you apply a QoS policy an uplink upward, QoS will be marked up when it hits this port. Not before. So it should be applied closest to the device as possible. Many times, local QoS is not as important, until it starts to get to the router. As most Cat 6 environments can generally manage all local traffic. So, depending on the number of devices and the amount of traffic, a decently robust network can handle all traffic local then you just give priority to the uplink remarks to ensure that what is important is first.

• Adobe Lens profile Creator for Windows - accidents with DNG and Windows 10 files

  I have trtied to a profile for my Bower 14 mm F2.8, but each time the Adobe Lens profile Creator for Windows crashes and says out of memory

  What?

  A few things to try.

  1. click on the image with the warning icon (triangle).

  2. on the Calibration tab, uncheck the box model Chromatic Aberration

  3. on the Advanced tab, confirm or set rectilinear lens model on three parameters radial distortion

  4. on the Advanced tab, confirm or set the main Point to the best estimate

  To the point #1, you can remove/replace this image. It is possible that the detection of the grid is a failure due to the insufficient image exposure or sharpening.

  To article #2, correction of chromatic aberration is now handled by eliminating Chromatic Aberration on the color of lens corrections tab. CA data in the profile you generate will be ignored.

  -Chris

• Best configuration of switch for 4 natachasery - 5 ESXi

  So, I need to tell my boys to network how I want the configuration of ports (Cisco switches) for 4 natachasery connection to my HP DL 360. I need the vSwitch VM access to 3 different VLAN. I'm NOT going to use vMotion for this.

  I guess, I see 2 possibilities and does not entirely undesrstand pros / cons...

  First of all, I thought I would split the enet to 2 separate switches cables, but I was told that if I chose that this channel of ports 1 route would be active and 2nd would be Eve. Basically can not paste all 4 cards and divide them. This could reduce the bandwidth, but give me a redundancy using 2 physical switches.

  Or I can have all 4 enet cables go to the same switch (etherchannel), but if this switch would die I'm dead in the water, AND I think that EtherChannel mode WE (my network guy preferred LACP) should stay and LACP cannot be used. According... http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1004048 I think I should also use 'Hash IP' if EtherChannel is used.

  So what is the advantage or disadvantages of each channel? Thank you!

  This article describes the aggregation of ESX/ESXi links:

  • ESX/ESXi host only supports grouping NETWORK adapters on a single physical switch or stacked switches.
  • Aggregation of links is never supported on disparate networks switches.
  • The switch must be set to perform 802.3ad aggregation of links in static mode WE and the virtual switch must have its defined route based on the IP hashload balancing method.  Ensure that participants of the network adapters are connected to the ports configured on the same physical switch.
  • Allowing each route based on the IP hash without 802.3ad aggregation or vice versa disrupts networking, so you must make the changes to the virtual switch first. In this way, the service console is not available, but the physical switch management interface is, so you can activate the aggregation on the affected ports to restore network.
  • For more information on ESX networking concepts, see the VMware Virtual Networking Concepts.
  • For more information on configuring a VLAN for NIC teaming, see Configuration of VLAN Virtual Switch, switch physical and virtual machines (1003806).
  • To set up the consolidation of NETWORK cards on ESX and a physical switch, see example configuration of EtherChannel / link aggregation with ESX/ESXi and Cisco/HP switches (1004048).
  • The only option for switch vSwitch or vDistributed that can be used with balancing EtherChannel is HASH IP.
  • Do not use tag with IP HASH load balancing.
  • Do not uplinks configure standby or not well obliterated with IP HASH load balancing.
  • VMware takes support only a single Etherchannel by vSwitch or distributed vNetwork (vDS).

  heybuzzzz wrote:

  In my case with no vMotion and just management and 3 VLAN all about 1 vSwitch I should put them all to active?

  Yes, they should all be active, there is really no need passive adapters (that I'm aware of your configuration).

  On your physical switches, you don't need to do anything more than what allows a VLAN correct, i.e.: should all etherchannel or a similar montage. Side vSwitch, you must use the default 'Port ID' nic teaming strategy.

• Installation of physical switches for ISCSI traffic

  Is that all I need to know from a networking perspective to configure ISCSI switches dedicated to support my ISCSI SAN on the left?

  I do not plan on switches connected to the prod network. I only plan on using these switches for ISCSI traffic.

  LeftHand supports LACP, if your supprt of switches that you should consider using the trunk mode. In my SAN P4300, I have two 3750's stacked. Each SAN node will connect to each switch and is located in a LACP/etherchannel link. All this is condensed to a single virtual IP address which is presented to ESX/i. don't forget to create a vmk for each dedicated vmware iscsi connection and bind according to this pdf.

• KVM switch for video XP & Windows 7 workstation computer?

  I am currently running Premiere Pro CS4 on a computer of hearts of low power SP3 of XP MCE duo (3 disc set) and contemplating the purchase of a Workstation Windows 7 (i7, 3 Disk Configuration).

  I would like to use the W7 machine for video editing only and use the XP machine for everything else.

  (1) will be a KVM switch for the monitor, (wireless) keyboard and mouse (wireless) work for this Setup?

  (2) I read that some KVM switches will not support the "hot buttons" on a keyboard. Is this correct?

  (3) what KVM switch recommend, if it would be OK to use a?

  I use this Gefen and love it.  Don't forget that you get a KVM with 1920 x 1080 resolution (or whatever your maximum resolution).  On my editing computer, I have two screens, one of the KVM and the second direct output on my card from nVidia CUDA.  When I spend at my computer to the Internet from the computer edition, the main editing computer display will move to the second screen, so I can see the progress on the editing screen, then when I switch back it moves to the split screen of KVM and the second monitor is 'Real-time' first watch "Desktop video during playback.  Even if my monitors are not the same resolution when I move back stay icons on the desktop, put that is dependent on video driver and since I never it used with ATI cards, I cannot comment if it will work with their drivers.  If you go for the Gefen you can also get the optional remote switch.

• How can I restore my old profile data for the reinstalled firefox

  had a problem with the opening of firefox and he suggested that I install a new version, I did and I have an "old data firefox" file. My question is how can I reinstall the old file and all the stuff that's about it.

  A 'Old Firefox Data' folder on the desktop is created when you reset Firefox.

  You should be able to copy the data selected from this folder to the current Firefox profile folder.

  For bookmarks that you would need to file places.sqlite or possibly restore bookmarks from a JSON backup in the folder bookmarkbackups.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See also:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Contact list suddenly wearing the profile picture for each contact. How can Iremove profile picture?

  My contact list suddenly realized for all my contacts profile pictures. I don't want that. I had not asked her. How can I get rid of it?

  View-> Sidebar Compact view.

• Suggestion for connecting NetGear switch for network home

  Hi all

  Recently, I bought NetGear ProSafe 8 - Port Gigabit Ethernet Switch GS108E. I would like to ask your help/suggestions to connect to my home network. The other components I have is Motorala SurfBoard SB6121 Cabel Modem and Cisco Valet M10 Wireless router.

  I have a Comcast Blast Plus service and if I check my internet speed by connecting my laptop directly to the cable modem, I get 50 Mbit/s Download and Upload of 11 Mbps. If I connect my laptop to the ethernet port of the router the speed I get is 25 Mbps download and still 11 Mbit/s upload. 50% reduction the internet download speed. So I decide to buy a NetGear Switch so that I can run all my connection cable of the switch and wait for the speed of download of 50 Mbps and 11 Mbps Upload.

  I made the connection like cable Modem--> Switch NetGear--> wireless router. In this configuration no my devices are able to connect to internet and I get message unidentified network. I tried to troubleshoot using the Windows Connection Manager, but he just asks me to turn off and on again. I tried this several times, but was not able to solve the problem.

  I want to return to the NetGear Switch mannual and made connections like shows in the quick installation guide. Cable modem-->--> Switch NetGear wireless router. In this configuration, all my devices are able to connect to internet but I get the speed of 25 Mbps download and 11 Mbps upload, identical to what I was getting into when running connection wireless router wired thorugh.

  So, essentially, NetGear switch does nothing for me except give me a few more ports to run the wired connections.

  It would be a great help if someone can guide me in the resolveing of my problem.

  Kind regards
  Shekhar

  He had bought a new router in the first place. Your router is the problem. Check on their website for a solution.