Programs are not in the taskbar

Similar Questions

• Not all programs are displayed on the taskbar at the bottom, they use to?

  For some reason any I no longer get open programs along the bottom of the desktop on the taskbar.  I use to get them all so I could pick each individually.  When I need to get to one that is open I have to close all those that have been opened after that I want to use.  I use to be able to open 4 or 5 programs so I could monitor the need, but is that actually a lot more work having close and then go back.

  Hi skier Craig,.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  Method 1

  Check if the problem persists in safe mode and post back with the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

  Method 3

  If the steps above fail, then I suggest that you scan and remove any malware or computer virus infections and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  We would also like to view your desktop in order to better understand the issue.

  Please provide us with the screenshot of the office.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• After I close my browser IE 9 and return to the office, my office programs are not available.

  After I close my browser IE 9 and return to the office, my office programs are not available. I have hover over a program and click, nothing happens for a few minutes... On the other hand, the taskbar and toolbar are all functioning normally. No other problems seem to be present.

  Thank you.

  Original title: freezing of funds

  Hello Manu,

  Thanks for the guidelines to help me solve my problem. Just to tell you that no, I have no error messages when I tried to access the office programs and Yes, I made a few changes in the pc... in the registry with Glary Utilities. That was my main concern.

  However, I tried the AUDITOR of FILE SYSTEM (CFS) and it fixed some problems.

  I also watched method 2 and did a performance using MICROSOFT FIX patch and ran that the Microsoft SECURITY SCANNER both have not reported any problems.

  Also tried method 1, no problem in safe MODE. I didn't think it was a third party program... so I decided to do a restore to an earlier date... then the problem seems to have disappeared.

  Start the pc also seems to be much faster.

  Thanks for the suggestions... I'll keep them as reference just in case...

• How can I remove a program are not not in the control panel: Add/Remove program list

  How can I remove a program are not not in the control panel: Add/Remove program list? I have a shortcut to a program called "Smart Engine" that pops up right on my desk. I can't find under anything else to remove it. I have remove the shortcuts, but they reappear everytime I restart.

  Smart Engine is a Trojan horse...  If you have MalwareBytes installed, try to run...  If this does not work (and it might because Smart Engine will try to stop it).  Click here for additional removal instructions...

  http://www.Spywares-remove.com/remove-smart-engine-smart-engine-removal-Guide

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• How can I pin a program (like Facebook) to the taskbar in Windows XP?

  Original title: pin a program to the taskbar in windows xp.

  How can I pin a program (like Facebook) to the taskbar in Windows XP?

  Hi JackieA_669,

  It is not possible to pin a website to the taskbar in Windows XP computer.

  However, this feature is available in Windows Vista & Windows 7.

  For more information, refer to this link: Pin a website to your taskbar

  You upgrade the computer to Windows 7, which has improved performance & stability. However, first run the Windows 7 Upgrade Advisor, which helps find potential compatibility issues with the hardware of your computer, devices, or programs that might affect installing Windows 7.

  For more information, follow this link: Windows XP to Windows 7 upgrade

  Hope the helps of information.
  Please post back and we do know.

• How can I retrieve emails that I deleted, if they are not in the deleted box

  How can I recover some old emails that I deleted, but they are not in the deleted box

  Your only option is a file recovery program.  This example: www.piriform.com/recuva

  Steve

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• Programs are missing after the running virus scan

  Original title: all my programs were leaving swipped when I put my anti-virus on

  When I downloaded my spyware. He swipped all my programs such as my word of procecers.  am trying to type a paper and it is raining on my computer and my computer came with them which means that they did not come with a cd to redownload

  Hi bjrthuggin286,

  1. what programs are missing from the system?

  2. what spyware Antivirus software do you use?

  You can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The bottom of my windows are obscured by the taskbar when you maximize their

  I have windows 7 and recently, the taskbar has begun to obscure the bottom of my windows, for example, when an excel document is opened and maximized, you can't access the different worksheets because they are hidden behind the taskbar.  I don't know happened.  I tried to solve this problem with auto-hide task bar settings, but found this very annoying that this means that I do not see my taskbar or it keeps popping up or endangered, which is annoying.  I don't want to restore my computer earlier if possible.  Y at - it a simple explanation of the non-geek I can follow easilly on how to solve this problem, because I find it so boring.  Thank you

  Thanks to all who responded, solve the problem himself after that I stopped my lap top and restarted again.  The reason that I had which was earlier that it will turn off no matter how many times I tried to stop.  So I finally just kept my finger on the power switch until it finally stopped and now I don't have a problem with windows optimize behind the taskbar.  Very happy.

• Sort the list of open windows in descending order when windows are combined in the taskbar

  Sort the list of open windows in descending order when windows are combined in the taskbar

  I like to combine windows in order to access all my programs in the taskbar. I have tons of open Outlook messages that I need to respond to the last open order to open older. The problem is that the list of the oldest opened open again, and I have to constantly scroll to the bottom of this list to access the most recent message. Is there a way view the list by e-mail open newest to oldest?

  It would be a time saving of huge productivity for me, and I saw that many of my colleagues would benefit as well.

  Thanks in advance for your help.

  Sorry there is no function like that.

  You can consider using Outlook flags instead.  Arrival of emails, you will need to respond to, click the red flag on them.  They will appear in your Outlook ' to do' list so you can keep track of those you will have to answer to and check the power off when you are finished.

• I know how to uninstall programs; However, how can you say that programs are essential to the functioning of my laptop

  I think I know how to uninstall programs; However, how can you say that programs are essential to the functioning of my laptop and who are just garbage programs or programs that I rarely use. Some are obvious (such as games and other), but there is so much and I'm not computer savvy. Help, please.     Give me a list for computer idiots or something. Thanx.

  I think I know how to uninstall programs; However, how can you say that programs are essential to the operation of my laptop and who are just garbage programs or programs that I rarely use. Some are obvious (such as games and other), but there is so much and I'm not computer savvy. Help, please.     Give me a list of idiots to computer or something. Thanx.

  Hello

  There is no list of what you don't need.

  We don't know what programs you have, or what you use.

  It is your personal choice.

  @@@@@@@@@@@@@@@@@@@@@

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• My license complete creative suite tells me that my trial has expired and now all programs are not available for me. What is going on?

  After 3 years, my suite fully licensed creative returned unexpectedly to a trial. Today it tells me that my trial has expired, and now all of the programs are not available for me. What is going on?

  Trial opens at the launch

• I just installed DW 13.2.  Linked files (all CSS, scripts...) "are not on the local disk" - all works in CS6. Help..?

  I just installed DW 13.2.  Linked files (all CSS, scripts...) "are not on the local disk" - all works in CS6. Help...

  When I insert one of the page of the Web site, it shows in the design window.  But when I try to bring any document linked in the left window, code, it is empty and the message says: "whatever.css is not on the local drive.  Also, when I click on LIVE, the file looks like she does not see the file CSS, no images.

  The same site looks and works OK in the DW CS6.

  I'm on Maverick - 2012 Mac Pro - 2 x 2.66 12-core, 64 GB of RAM.

  I configured the same way as CS6 preferences.  Same location of the site, same links.

  Am I missing something?  What should I do?  I uninstalled the DW CC, cleaned pref and installed it again.  Same question.

  Help, please.

  I think, I solved the problem, but I still think that the Dreamweaver does not recognize the addresses.

  I then drive CC_A BB_A Web sites (these are the actual names of the readers).  It's always the disk 'data', apart from the OS, but with a different name.  everything works.  Opening files referred to in the script window, 'live' works as supposed.

  I can only speculate that readers 'CC_A' name has confused the program called CC.

  I can find no other explanation, since, in addition to the name of the drive - everything else is the same.

  Thanks for trying to help.

• When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  Sorry try again - your post does not calculate

  They are all in the photo library, but I don't know why they are not in pictures

  What version of the operating system and Photos you have? Explain what exactly you're actually seeing and what has changed since it worked

  LN