Project name Variable cut

Similar Questions

• How better for import of movement 5 projects in Final Cut Pro

  I use for my projects:

  -Motion 5 (5.1.2)

  -Final Cut Pro X (10.1.4)

  -Compressor (4.1.3)

  -Mavericks OSX on a Macbook Pro 2 GHz and 8 GB RAM

  -The images that requires a lot of editing, green screen and the particle effects

  I had a question about what would be the best way to import Motion 5 sequences into a Final Cut Pro project?

  Specifically, I started using both programs as a hobby, and I learned how to post Motion projects in Final Cut Pro as a generator.

  However, as most of my work involves a broad green screen and the effects of particles of edition, all the sequences essentially have to go through Motion. (as I am skeptical of 'Tools' Final Cut Pro when I can do more with proposal anyway)

  So is the only way to import sequences of movement is made by a generator in Final Cut Pro?

  I feel like there should be (and it might, like why I'm curious) a less encumbering way to import video edited between the movement in addition to hundreds of generators in Final Cut Pro.

  Using the method of generator, it's what I do, and I was wondering if I missed somewhere where I can import media motion editing in Final Cut Pro.

  Thanks in advance for your time and help

  MMake the Motion of the project and export it as a video to use in the PCF file.

• How to create a file name variable with the County and the date?

  Objective: Create a file name variable with the County and the date

  Error: get a lot of error. Do you know how to change my code?

  Question: how to create a file name variable with the County and the date?

  Mini code:

  std::string * rawfilepath;
  std::string * rawfilename;

  rawfilepath = "./shared/documents/";
  RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
  QFile file (rawfilename);
  If (file.exists ()) {}
  rawfilenamecount ++;
  RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
  }

  Thank you for your attention,

  Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.

  Solution is below.

  While (access (rawfilename, F_OK)! = - 1) {}
  rawfilenamecount ++;
  sprintf (format, RawFileName, rawfilenamecount);
  fprintf (stderr, "file exists");
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "System Time (ms)" "");

• Impossible to import the same project name as a previously deleted

  I had a project in Flash Builder, I needed to update; the old version was a Flash Professional project using a FLA, but the new version uses a different folder structure and XFL. I have a click with the right button on the old project in Flash Builder and choose 'Remove', then choose the option "do not remove content". Then, I renamed the project folder and put the new version of the project with the same name of file, in the same place.

  Flash Builder doesn't let me import the new version of the project. It will take me through the Import Wizard, but when he finished nothing appears in Flash Builder. Almost seems as if there is a flag 'permanently ignore this name forever projects' hidden somewhere, although I hope that FB was not inflexible. Anyone know how to fix this? Thank you.

  Eclipse has serious problems with distinguish uppercase / lowercase in project names and will be silently fails if the name of a project changes in the case. Apparently even if you delete the project, then rebuild. So I had to change the capitalization to match the previous version.

• get the project name to use in a procedure?

  How to get the project name to use in a procedure?
  example of < % = odiRef.getOption ("COMPATIBLE") % > - but the name of the project or your ID?
  the 11 ODI.
  Thank you
  
  Published by: ODI Dev user on 12/01/2010 16:42

  Hello

  Why you want to get the name of the project? When you place a repository of development to a repository of execution, where there is no concept of projects, what value do you offer you to get?

  BOS

• The project name will not update

  My html help project name will not change. I changed it to the project settings and the old display name in the title bar. I tried to change the title on the first page too with no luck.
  
  Thank you
  
  Jim

  On the project tab, I chose Windows > new window. I typed the name I wanted in the window caption field. The next time I clicked on primary layout generate the name changed to my new name - yahoo! small victory.

• Captivate 4 - project Actions / Variables

  Someone at - he had problems when using Variables of Action/4 CP, I'm trying to display the title of the course by the following

  $$cpInfoProjectName$ $

  But it keeps cutting off parts of the title. If the title of my project is say HSE training of plant-based, what I get is HSE Core Pla Stange is I have another project I used the same thing and it dose do not do this and shows all this! So I'm a little at a loss to know why.

  Any ideas...

  Mike

  Hello

  How to insert a variable? Here is a screenshot of the dialog of a text caption. Use the button with an X (highlighted in yellow) to insert a variable, here you can change the number of characters.

  BTW: I have blogged and wrote a few articles on variables, some also for CP4:

  Curious about variables?

  Lilybiri

  

• During the migration of projects opening in PICTURES project names will appear on the News Photos 'albums '?

  Prepare my Aperture library (with deep levels of files/projects/albums) to migrate to pictures.  I want to know if the NAMES of my files/projects/albums will be kept in Photos and will appear in the new view of photo albums.

  Using Aperture 3.6 and pictures is up to date. 10.11.6 OSX

  Yes, they migrate. To more easily confirm everything is fine select see the sidebar on the view menu. Also, your current Aperture library will remain unchanged during the migration, if youre not really take risks by trying.

• Cannot open the project on final cut pro :(

  Hey guys, I have a big problem.
  I edited a video which is about 1h30m and using the function "Multicam clip", and successfully made and made a DVD. but unfortunately I need the second edition. Then I opened the library file, click the project, Final Cut Pro X continuous loading and close unexpectedly, and another project to another event works normally. anyone with the same problem? I need to send it to my tmr customer

  p.s. I deleted the file, preferably according to most of the Q & A.

  What version of FCP are you running? If it's the 10.1 or later, projects are in the events that are contained in libraries.

  If 10.1 or later, is the DVD project that does not open in the same library as the project is open? Or they in different libraries

  Russ

• Why am I forced to constantly create a new project from an old project name?

  Everytime I open a project I worked on, say yesterday, GarageBand requires me to create a new name with a number attached to the current name. So, I have to remove my old project and rename the a new back to the old.   Is there a way I can work on a project that I have already created without being obliged to give him a new name over and over again?  It's so frustrating and so it seems useless.

  Everytime I open a project I worked on, say yesterday, GarageBand requires me to create a new name with a number attached to the current name.

  Which should occur only if the projects that you open have been created by a different version of GarageBand, for example, GarageBand iOS on iPad. In this case, GarageBAnd needs to create a converted version and record the original, because the new version is more readable by the other version of GarageBand. Or, if the project you are trying to open is write protected.

  Have you created projects on another device or another user account?

• DAQmx tasks name variable

  Can someone explain why use a variable LabVIEWIOControl to keep the name of the task of DAQmx, Labview causes the sequence editor to become extremely slow. The vi attached does nothing more to open a chan (output on a pxi-6723) and its closure via the parameter of OPERATION enum (see teststand sequence).

  To simulate the problem, right click on the Action step and select "define the module." Once the tab "module" is open, click back and forth between Action 1 and 2 of the Action (1,2,1,2, 1.etc). You should see some delay, pulling up info from module of step up 2-1.

  My 'real' application works well, but a step of editing may take 10 seconds to get the info from the module. Note: This is the type of variable only what causes this problem that I have used cluster, string, enums, tables ect in the past without problems.

  I have attached a seq teststand advocating the vi.

  Görz

  There is a slowdown in TestStand, known while choosing a 8.6 VI, which has control of e/s on the side of the connector.

  See the following link for more details and a fix - http://digital.ni.com/public.nsf/allkb/1E3C0A420D28B60E862574C8004D9062

  Concerning

  Anand jegou

  National Instruments

• Find a point of file and project name.

  Suppose I have a comp with a layer containing an apple.png. Now, I would like to replace it with orange.png. To call replaceSource(), I need to provide a point of newSource:

  App.Project.Item (index) .layer (index) .replaceSource (newSource, fixExpressions)

  My newbee question is how to navigate to orange.png if my project structure looks like this:

  -Comps

  -Solid

  -Photos

  -fruit

  -apple.png

  -orange.png

  -lemon.png

  I guess that perform looping through all elements of project and verification of the name of the item would work, but is there a smarter way to do it?

  Looping thought the collection of project items is the best way to do it. You can just do a simple function that you can provide a file name as argument. This way it'll be easier to call whenever you need an element.

• MovieClip name variable

  I have only one scene with MovieClips using secondary scenes. Inside the image, I have a MovieClip that contains the Menu "buttons"(MovieClips agissant comme deles de boutons). "»

  Since the Menu buttons, I'm trying to access frame labels inside of the "slips" who live at the same level as the MovieClip Menu. Menu and Slide 1,2,3 are all brothers and sisters.

  I'll put 'Slovak' in the Menu when the user clicks on a button I would like to pass the path of the slide label.

  I can get things hardcoded a name of coding, but I can't understand how to move the stored variable.

  For more convenience, the value of the Slovak var is a string containing the exact name of the slide.

  Here's the code to work:

  MovieClip (this.parent.getChildByName ("Slide3")) .gotoAndPlay ("slide_out");

  I need:

  MovieClip (this.parent.getChildByName (VARIABLE VALUE)) .gotoAndPlay ("slide_out");

  How can I pass the variable here?

  Thanks in advance.

  I don't understand what the problem is. To use a variable instead of a string, you just put the name of the variable in place of the string.

  MovieClip (this.parent.getChildByName (Slovak)) .gotoAndPlay ("slide_out");

• The title of chapter in FM10 name variable

  I'm tweaking a model I created, which was based on the standard book provided with FM10 models. For some reason when I insert the variable name of the chapter title, the title of the current chapter does not appear. Instead, the name of the file is. I read in the help PDF you can use the variable to spread the name of the folder, but I need to do. I want to just the title of the chapter to appear in each file in the book.

  Is anyway to fix this? I have change almost all paragraph tags, so maybe I have the variable to point to my new tag of paragraph titrechapitre? This problem occurs in all files in the book.

  I'm under FM 10.0.2.419 on Win 7 32 bit. I also installed CS5 (not sure if that makes a difference or not).

  Thanks for the help,

  Smitty

  You must configure a hierarchical book by using folders in order to properly the collection variable $chaptertitlename as you wish.

  See this blog and content demo that shows roughly how it is used: http://blogs.adobe.com/techcomm/2009/09/fm9_hierarchical_books_new_variable.html

  Note: even if the blog never mentions the name of the variable, one speaks of the $chaptertitlename. It comes to early examples of new approach to stealth documentation from Adobe via the blogs using the methodology of catch-22.

  If you want to insert the title of the chapter (content picked up by a paratag) in the header or the footer of your master pages, then use one of the variables M/F running, specify the name of paratag, for example <$paratext[ChapterTitle]>, and don't forget to try to decipher the meaning in the help file. [Your sanity will thank you for it.]

• In the variable name variable

  Hi guys/girls.

  I have a problem, I have a number of tables of items called "pres1", 'pres2', 'pres3', etc.

  I have a variable which will be 1, 2, 3...

  the amount of the variable goes up will always be the same amount as the number in the name of the table. That is to say if the berries go up to "pres6" the variable will go does not exceed 6

  I want to access the data in my table based on the currently set number variable

  IE: If myVar = 2, I want to access the data in "pres2.

  I'm sure that its probably something very simple and im just getting the syntax wrong, can anyone help?

  Thanks in advance

  If press1, press2, etc. are names of variables in the current scope, use:

  trace (this ["press" + myVar] [1]);