Project of fixed cost and charges

Similar Questions

• What is the difference between the fixed cost, Costed and distributed?

  Hi friends,
  Can someone tell me the difference between a fixed cost, Costed and distributed, please?
  
  Thank you

  Check under the "Costing" title on the HRMS guide, the link is here
  http://docs.Oracle.com/CD/A60725_05/HTML/comnls/us/per/defelw04.htm
  Thank you

• USBOTG and Charge at the same time on Stream 8

  To keep this thread as productive as possible and efficient for those who find it useful to:

  Unless you have under your eyes

  1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)

  2 source code for the firmware BIOS and kernel that controls the material

  Please DO NOT respond or say "is not possible".  In view of the above is true, you do not have enough information to say '' not possible. ''

  If no one replys with a solution, what he calls not possible by default.

  Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.

  An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.

  And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes.  The majority of the other tablet PCs are capable of it.  It seems that only the 8 Stream and a few others have trouble with her.

  ~~~~

  I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously.  This means that the cable has a minimum of three connectors.  One of the possible configurations are as follows (apart from the normal charging cable):

  1 cable Micro USB B Male - connect to the stream 8

  2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)

  3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.

  Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.

  A and if the same cable can act as a normal OTG no charger for when no external power supply is available.  This may necessitate a switch or an electrontics active inside.

  The last part of this goal is unimportant for various reasons.  I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.

  ~~~~

  The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.

  If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time.  However, it would be better if there were several #3 connectors integrated in the cable itself.  This would be better as a suitable USB hub also requires its own power.  That an adapter is necessary if the whole thing were integrated into one.

  ~~~~

  I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)

  Today's date is 2015-01-16.  If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?

  ~~~~

  Technical training:

  I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.

  I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software.  For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.

  But this is only one of the many "could bes".

  In addition, this can be no standard regarding the standard USB.  What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is.  Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.

  I'm not familiar with the standard USB.  Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.

  But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it?  Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.

  In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.

  The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3.  This is the bidirectional data differential lines D - and D + respectively.  In data mode, all the data passes back and forth on those lines.  When you load with a cable, it's the charger module that puts this short, not on the cable.  I measured the short on three different Chargers.  It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow.  The others 0 ohms was generic.  The third was for an apple iPad and it measured on 53KOhms.  It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself.  Leave it to Apple to be different.

  This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance.  I could be wrong on this subject...

  The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.

  USB B has 5 pins.  USB has only 4.  The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.

  If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.

  Dead shorting things always makes me nervous.  If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.

  Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to.  Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low...   All but a dead short but if possible.

  So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here.  In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.

  Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.

  Probably a register inside this chip would be at all times what the State of the pin ID is a binary number.  All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc.  (and change the State of the icon on the screen of the rude)

  I don't know if the PIN ID method described is a standard USB or not either.

  Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.

  The device would need to act is a kind of extension of bus.  As an active hub.  But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."

  This requires a smart external device with a processor Inside, no doubt.

  It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.

  There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream.  But its expensive because it is active.  Se here:

  http://AMZN.com/B00OVDE0GC

  It's called a "Docking Station".

  A reference to a product that does exactly what I want (possibly without active electronic components) is here:

  http://AMZN.com/B00LTHBCNM

  It's by Kirin and it is a device of type squid with four USB ports.  Precisely, which is my goal.  But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not.  Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream.  This device has a switch.

  I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in.  Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.

  It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling.  Full proposal here.

  These tips seem dubious to me.  Changes in the BIOS could change the way it works.  Also you can not be sure what actually happens if you do not have a schematic representation.  You could damage your tablet.  Many people will support icon in the operating system whether the Tablet is in charge.  But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting.  Especially when it's something that I did not built and could not fix if I FRY.

  Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen?  This reflect the bit of hardware control programs actually feeding management and status on the port?  Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring?  Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets.  In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations.  That could lead to fighting between them, with more than 100% of their capacity.  For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V.  Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two.  This may be several amperes. (many)  In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.

  Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition.  In other words it keeps flipping back and forth quickly between OTG and fresh.  It can give the illusion that it works.  You can have marginal communication with your USB devices and battery could even load.  But will still be a lot of stress on the power circuit.

  It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.

  If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.

  Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?

  That's what I know so far.  If you think you can help, thanks in advance, or if this helped you, then your quite welcome.

  It works

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 470-abes & baynote_bnrank = 0 & baynote_irrank = 0 & ~ CK = baynoteSearch & dgc = CJ & cid = 47997 & lid = 4279734 & acd = 10550055-4485850-eb75dcb47e53437680ed323a1f4885fe

  Evidence

  http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/

  But it's 4 x the price in Europe

  Have fun

• Qosmio F60-136: Impossible to disable the USB sleep-and-Charge in hibernation mode

  USB sleep-and-Charge function is marked as disabled in BIOS (v2.70).
  This can be checked with Sleep Utility (v1.4.1.5) where the function also seems to be disabled.
  During the stop of my laptop, smart phone or the stop MP3 player to charge.
  Everything is OK down there.

  However, when putting my laptop in * hibernation mode *, my Smartphone and my MP3 player continues to be charged!
  It's a real problem, because, even if no device is plugged into the USB port, in hibernation, the battery loses capacity quickly (much more when the laptop is turned off completely)

  * Obviously a bug in this feature. Please provide a fix as soon as possible! *

  _Environment details: _
  Toshiba Qosmio F60 136
  BIOS version: 2.70
  THIS version: 2.40
  Version of the utility of sleep: 1.4.1.5

  Hmm interesting
  Have you checked if the sleep and the load is disabled in USB Sleep and Charge Utility
  If please don t mix USB Sleep and Charge utility and utility of sleep.

• Fixed header and anchor tags

  Warnings: I am new to this forum and use HR 2015 since the end of May. I am somewhere between beginner and intermediate with CSS and HTML, and I don't know anything about javascript or JQuery.

  I tweaked the catalogue office with multi-screen presentation homepage so that it has a fixed header and content scrolls to the top under the header. It works well and looks beautiful up by clicking on a link to an anchor, for example when using the MiniTOC to navigate through a topic. The anchoring of the charges under the heading at the top of the window of the browser instead of under the header at the top of the visible space.

  After studying the problem, I had hoped that I had found a fix to it that hashtag connects this whim is the browser window, but it did not work.

  More research and digging in HR how to configure its bookmark anchors and found out that bookmarks are configured with one

  < a name = "blabla" > < / a >

  tag for anchors instead of one

  < h1 id = "blabla" > blah di blah < / h1 >

  tag.

  According to W3 Schools, "the < a > name attribute not is not supported in HTML5. Use the id attribute instead. "It's disappointing, given that the choice of output is Multiscreen HTML5.

  Can anyone offer a solution that works with apparently outdated HR < a name = "MiniTOCBookMark1 > < /a > format?"

  Thanks in advance!

  P.S. I am posting this at the end of the day and I won't work again until the morning of August 22, 2016, so if I do not answer questions of clarification immediately, please don't think I'm ignoring you.

  I have a header no scroll, and I just added the following to my screen layout stylesheet (targeting IE only):

  a[name]                    {

  padding-top: 130px;

  }

  Adjust the value of the pixel to function.

  I had a play on Chrome, and seems the following to run it:

  {[name]

  padding-top: 130px;

  margin-top:-130px;

  Display: block;

  }

• I would be able to move seamlessly between fix PS and PS mixture?

  I have PS Lightroom, fix PS and PS mix on my iPad iOS 9.0 and I have a record of creative cloud synchronized with my office catalogue Lightroom and wonder if I can change one photo in lightroom iOS and then see these changes infix or mix? I can't know if it is possible to work on a single photo in each application according to what want to do.

  You can move an image around the use of Adobe's "Creative Sync".

  In LR, choose a picture to change, then press the share icon and choose Edit in.

  Mix, open a project, and then select a layer. Press creative cloud icon to display the menu edit.

  Best.

• Separation of cost fixed cost report

  Hello

  Is there a way to show the breakdown of the fixed cost in the generated reports?

  We have configured multiple costs Vapp and VM levels according to what the user services want to buy. Report is show them all added together.

  Thank you

  Savita

  Hi Savita,

  PDF reports are nothing else than a report XML representation. I think that following XPath is the one you are looking for:

  Reports/report/ComputedData/EntityDetail/entity/Parents/CostModel/FixedCosts/FixedCost

  Please see the guide to the API for more details.

  Thank you

  Diomande

• Make a call to REST API through c# to 'change a fixed cost value.

  HI -.

  I am trying to make a call to REST API through c# for "change to a fixed cost value.

  I did successfully the following tasks via c# with the call of the API REMAINS the chargeback manager 2.0

  -Connection to the chargeback manager 2.0

  -Add a custom Chargeback hierarchy

  -Add vCenter Server entity in the hierarchy of Chargeback that was created by the REST API

  -Add the fixed cost model.

  But when I tried to use the REST API to 'change a value of fixed cost' based on the version of the document programming API 2.0.

  He is not successful... Here are the error messages and the code I had.

  Code:

  Public Shared ReadOnly Property ModifiyFixedCost (CookieContainer cookieContainer) as string
  {
  HttpWebRequest request;
  Stream streamReq;
  = request (WebRequest.Create ("https://10.63.11.34/vCenter-CB/api/fixedCost/707/values"); )
  = //request (WebRequest.Create ("https://10.63.11.34/vCenter-CB/api/hierarchy/696/entity/697/costModel/701/fixedCosts/values"); )
  request. CookieContainer = cookieContainer;
  request. Method = "PUT";
  request. KeepAlive = true;
  request. Timeout = 600000;
  request. ContentType = "application/x-www-formulaires-urlencoded; application/x-www-form-urlencoded
  streamReq = request. GetRequestStream();

  Reading XML file.
  String strXML;
  String strCurrentPath = System.IO.Directory.GetCurrentDirectory;
  String strPath = "";
  strPath = strCurrentPath + "\\ModifiyFixedCostXML.txt";

  using (StreamReader sr = new StreamReader (strPath))
  {
  strXML = sr. ReadToEnd();
  }

  String strResp;
  Byte [] byteArray = Encoding.UTF8.GetBytes (strXML);
  streamReq.Write (byteArray, 0, byteArray.Length);
  streamReq.Close ();

  to using (WebResponse response = request. GetResponse())
  {
  Stream streamResp = response. GetResponseStream();
  StreamReader streamReaderResp = new StreamReader (streamResp);
  strResp = streamReaderResp.ReadToEnd ();
  }
  Return strResp;
  }

  XML file:

  <? XML version = "1.0" encoding = "UTF-8"? >
  < application >
  < FixedCosts >
  < FixedCost id = "1" >
  values <>
  < value >
  < cost > 3.14 < / cost >
  < span id = "1" / >
  < / value >
  < / value >
  < / FixedCost >
  < / FixedCosts >
  < / request >

  Error messages;

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < response xmlns =" http://www.VMware.com/vCenter/chargeback/2.0 "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " status = "Failure" > ""

  < majorErrorCode error = '500' minorErrorCode = '0' message = "No such method defined or an API call lack of required arguments. / >

  < / answer >

  Please explain what is the problem here... Is the chargeback REST API c# 2.0 support?

  Thank you

  Yale

  Yale,

  I see the following changes are required in the application:

  1. URL is missing, the startTime and endTime, if the end time is not required to send it as -1. For example: http://localhost: 8080/vCenter-CB/api/fixedCost/553/values? startTime = endTime =-1 & 1340130600000
  2. In XML, fixed cost id must be the same as that mentioned in the URL. XML tag is

  Thank you

  Diomande

• Moving project between first CS5 and CS5.5 will not work... Help!

  If all goes well installed CS5.5 sparer dir and tried to import the CS5 project. Well he opened very fast but then he had trouble scouring the project. It seems that CS5.5 dislike some mov files. Maybe som codec problems? The windows monitor will be freezes or the display of 'media pending' forever. On some files mov, *.avi and SB it will allow scrubbing... but very slow. Rendering will not work either when it comes to some problem files, it will stop making and ending with the creation of crash. I tried to create a new empty project to 5.5 and just imported these "problem files", but then it works very well with the washing and rendering. There is no open problem the project in CS5.03, everything works perfectly there. So what I did? Yes, I backed up my c: drive and formatted, it... 28 hours later I installed everything nice and fresh with only the CS5.5 version on my drive. That worked better? N° !!! the same problem. After another 15 hours of trial and error, I got my "blessed of God" has registered C:disk. As far as I understand that this problem seems to be a problem with 5.5 and not my setup of the computer with codecs etc.? If there is someone out there who can help me?

  Thank you

  Inteli7 975extreme @4. 2 GHz

  Adaptec 5805 in raid 5

  1x300GB Velociraptor for Win7 ultimate

  4x300GB Velociraptor for scratch in raid 5 disk

  ZOTAC GTX480

  UAD-pci card

  Corsair TX 750W power supply

  22 '' dual monitors

  It seems that CS5.5 dislike some mov files.

  It is indeed true.  Adobe is aware of the problem and working on a fix.

• Which codec to use to render the project HD to reopen and then re-edit

  I'm new to hd video so please forgive some of my questions.

  I mainly large projects such as the conventions of weddings etc. Usually, I give my projects in 2 parts and I then re - edit the last half and join them and finish my project.

  My question is what codec I make parts of my project to bring back in a clip to associate myself with the second half.

  Joan

  Joan,

  Yes you can just like with SD material, but I repeat: all made, export and import it back causes a loss of generation, which you want to avoid at all costs.

• I bought the app bundle and charged separately for two apps

  Hello.

  This was my first purchase. I bought the boundle app on App Store, ('The Go Collection' for 1 euro) and charged for two applications 2 euros on my bank account. What should I do? And also I have received everything or anything.

  How does show on the purchase of your account history: view your purchase history in iTunes on Mac or PC - Support Apple store or http://reportaproblem.apple.com on your phone? If you have been overcharged (by example part of the load is not a temporary store holding the load, which should be automatically reimbursed by the card issuer in a few days or more: on the payment card's authorization in the iTunes Store - Apple Support) and then contact iTunes support via the site 'report a problem' above

• IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

  IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

  Hello

  Apple has not yet announced a.

  You can submit your comments and suggestions to Apple here:

  https://www.Apple.com/feedback/iPhone.html

• on the Iphone 7. How to listen to music, if we have a normal headset and charge at the same time?

  How to listen to music, if we have a normal headset and charge at the same time?

  < re-titled by host >

  It sopposed must be a wireless charging dock to be launched shortly if the dock does not so it is a disappointment

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Sleep and charge utility does not work on Satellite C850-B763.

  Hello

  I have Toshiba Satellite C850-B763 unique language of windows 8.

  When I try to run the sleep and cool service I get the message "unable to get hardware information.

  After clicking ok, I got the sleep and Charge Control Panel, but boxes are disabled and the battery bar works very well.

  Can you please help?

  Hello

  First you should check if s for computer laptop USB port support the Sleep & Charge feature.
  USB ports support load & sleep are marked with a small sign of flash.

  Here a nice Youtube clip on "Sleep and Charge" feuture
  http://www.YouTube.com/watch?v=tJhLOfJybmQ

  In the case of the laptop supports this feature, you should take the next step and must check if sleep & support is enabled in the BIOS.
  To access the BIOS, press F2 during the turn on/off the unit.
  Note: the device should be turned off (hybrid closed must be disabled)