Protection of the rights of intellectual property in file Bar

Similar Questions

• 100.0 Mbps, but not the acquisition of intellectual property

  100.0 Mbps, but not the acquisition of intellectual property

  Hello manicuredlawns,

  This sounds like the behavior of the specific virus. You have already run a full system scan with your anti-virus security software?
  You may need to do this in Mode without failure to a complete analysis of the system:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  I suggest to choose Safe Mode with network on see if the network connection works differently.
  Also try a restore of the system in safe mode to see if it makes no progress:
  http://support.Microsoft.com/kb/304449

• Unable to find the right option to share a file in Windows 7

  Original title: change toolbar options

  I'm trying to access a file to only some people.  The Help window I found online said click Start, click my name, then look for the folder, and then click on "Share With" on the toolbar.  However, the only options on my toolbar are organize, burning, and new folder.  Is there a way to display additional options in the toolbar?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you cannot access a file because you do not get the right option to do. Let me ask you;

  • Want to share this file with the same version of Windows or other?

  Please see the measures to make sure that you are ready to share a file.

  Step 1: You must first check if network discovery is enabled IT in your computer, to do this follow the link below.

  What is network discovery?

  Step 2: Below is the article explains how to set up files and printers, sharing on a home network with computers running different versions of Windows.

  Networking of computers running different versions of Windows

  Step 3: Only people who belong to the homegroup can see devices and shared libraries. You can choose to share libraries, devices, or files and individual folders with specific people in your homegroup or everyone.

  Please refer to: homegroup from start to finish

  Additional information:

  Share files with anyone

  File sharing essentials

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Frequent, intermittent loss of wireless connection. Seems to be related to the problems of intellectual property

  I have a problem with my connection wireless, but only from the House. The laptop connects immediately, but seems to systematically lose the connection even if the signal strength is excellent.  It seems that the IP is regularly lost during a connection and must constantly be renewed.

  I've been connected with wireless no problem in a cafeteria for the last two hours.  I am disconnected only when I'm at home.  Is it possible that this is related to security?
  Any help would be greatly appreciated.

  I checked the IP address configuration and received the following message is displayed:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Winuser > ipconfig

  Windows IP configuration

  An internal error has occurred: a device attached to the system is not functioning.

  Contact the Services de Support technique Microsoft for assistance.

  Additional information: unknown media status code.

  C:\Documents and Settings\Winuser >
  I also run the network diagnostic tool and received the following notification:
  Maps network has NO
  [00000002] cisco Systems PCI wireless network
  Caption = [00000002] Cisco Systems PCI Wireless LAN adapt
  DatabasePath = %SystemRoot%\System32\drivers\etc
  Description = Intel(r) PRO/1000 MT connection Mobile - Packet Scheduler Miniport
  DHCPEnabled = TRUE
  DNSEnabledForWINSResolution = FALSE
  DNSHostName = IBM-CCD92CC0547
  DomainDNSRegistrationEnabled = FALSE
  FullDNSRegistrationEnabled = TRUE
  Index = 2
  IPConnectionMetric = 1
  IPEnabled = TRUE
  IPFilterSecurityEnabled = FALSE
  IPSecPermitIPProtocols = 0
  IPSecPermitTCPPorts = 0
  IPSecPermitUDPPorts = 0
  IPXEnabled = FALSE
  MACAddress = 00:11:25:47:81:6E
  ServiceName = PCX504
  SettingID = {4B4A6905-63A0-4E1F-BCB0-6346ACF583AB}
  TcpipNetbiosOptions = 0
  TcpWindowSize = 64512
  WINSEnableLMHostsLookup = TRUE
  [00000011] Intel PRO/1000 MT Mobile connection
  Caption = [00000011] connection Mobile of Intel (r) PRO/1000 MT
  DatabasePath = %SystemRoot%\System32\drivers\etc
  Description = Intel(r) PRO/1000 MT connection Mobile - Packet Scheduler Miniport
  DHCPEnabled = TRUE
  DHCPLeaseExpires = 18:31:30 09/30/2009
  DHCPLeaseObtained = 17:31:30 09/30/2009
  DNSEnabledForWINSResolution = FALSE
  DNSHostName = IBM-CCD92CC0547
  DomainDNSRegistrationEnabled = FALSE
  FullDNSRegistrationEnabled = TRUE
  Index = 11
  IPConnectionMetric = 1
  IPEnabled = TRUE
  IPFilterSecurityEnabled = FALSE
  IPSecPermitIPProtocols = 0
  IPSecPermitTCPPorts = 0
  IPSecPermitUDPPorts = 0
  IPXEnabled = FALSE
  MACAddress = 00:11:25:47:81:6E
  ServiceName = E1000
  SettingID = {8FD85EC6-0D7D-4F3F-B970-1DD968C12A1F}
  TcpipNetbiosOptions = 0
  TcpWindowSize = 64512
  WINSEnableLMHostsLookup = TRUE
  [00000013] Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter (FAILED)
  Caption = [00000013], Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter
  DatabasePath = %SystemRoot%\System32\drivers\etc
  DefaultIPGateway = 10.29.21.254(Same sous-réseau) (PAST)
  Ping 10.29.21.254 with 32 bytes of data:
  Reply from 10.29.21.254: bytes = 32 time = 8ms TTL = 8
  Reply from 10.29.21.254: bytes = 32 time = 6ms TTL = 6
  Reply from 10.29.21.254: bytes = 32 time = 6ms TTL = 6
  Reply from 10.29.21.254: bytes = 32 time = 2ms TTL = 2
  Ping statistics for 10.29.21.254:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 2ms, Maximum = 8ms, average = 5ms
  Description = Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter - Packet Scheduler Miniport
  DHCPEnabled = TRUE
  DHCPLeaseExpires = 15:56:37 11/06/2009
  DHCPLeaseObtained = 14:56:37 11/06/2009
  DHCPServer = 1.1.1.1 (PAST)
  Ping 1.1.1.1 with 32 bytes of data:
  1.1.1.1 response: bytes = 32 time = 1ms TTL = 1
  1.1.1.1 response: bytes = 32 time = 3ms TTL = 3
  1.1.1.1 response: bytes = 32 time = 2ms TTL = 2
  1.1.1.1 response: bytes = 32 time = 2ms TTL = 2
  Ping statistics for 1.1.1.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 3ms, average = 2ms
  DNSDomain = ahcguestnet.com
  DNSEnabledForWINSResolution = FALSE
  DNSHostName = IBM-CCD92CC0547
  DNSServerSearchOrder = 167.177.96.225 (FAILED)
  Ping 167.177.96.225 with 32 bytes of data:
  Request timed out.
  Request timed out.
  Request timed out.
  Request timed out.
  Ping statistics for 167.177.96.225:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss)

  Hello

  Maybe this can help.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack MVP-networking. EZLAN.NET

• How is the pool of intellectual property for a VPN Customer treated?

  If a vpn client is issued an address from a pool, that subnet is treated as if it comes from the external interface - compared to how you should structure your ACL?

  Thank you

  Yes, if the vpn client ends to the outside.

• How to create a sequence that generates in the form of intellectual property?

  Hello
  
  I want to create a sequence that can generate an IP numbers. as
  
  224.0.0.1
  224.0.0.2
  .
  .
  .
  224.255.255.255
  
  Is this possible?
  
  
  Thank you very much

  KinsaKaUy? wrote:

  Then, just the format of address IP (exercise left to you)

  Hint please :)

  Enter the socket interface ntoa - simple enough to reproduce in the SQL and PL/SQL.

  PS. Look in the section "+ dotted IP number +"-it should run to the top of implementation details.

• can someone help me choose the right program to open my file on the desktop?

  Try to open the game of chess. It prompted me to choose another file to open chess game of Titian. So I did it by clicking on the internet window explore. now all the progress or files on my desktop changed for symbol (e) of the exploring on them and I can't open them. I don't know how to get it back. Can someone help me?

  Hello

  I would like to know the operating system you work with.

  Method 1) when you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Method 2) in case if it does not help, you must change the associated file. To change the file association for a specific file, you must first display the properties of the file.

  1. You can view the properties of a file by selecting the file and choosing 'Properties' in the file menu. Or you can simply right-click on the file and select "Properties" from the context menu that appears.
  1. To change this file association, click the button change.
  1. You are given a list of recommended programs to open the file, as well as several other programs on your computer. The recommended programs are programs that Windows knows is going to be able to open the current file type. For this reason, choose a program from the list of recommended programs is a good idea. You can choose a program from the list of other programs, but the file cannot open.
  1. You can change this program opens all documents of a certain type of file, and then click the checkbox "Always use the selected program to open this type of file."
  1. Click OK

  Check the link for more information:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  It may be useful

• vmWare + vps debian on intellectual property of files on

  Hi all

  I have install on my vmware server

  I want to do a vps with debian 5 (iso image)

  I want to put my vps to one of my lead-over ip

  I will start the vmware console

  • new virtual machines

  • Linux kernel 2.6.x kernel

  everything is ok

  but I have problems with the installation of virtual network

  I put:

  1)

  Server: the linux kernel has to be told where to forward packets for the virtual machines, in this case the vmnet1 of virtual network device, which is the interface to the virtual machines. This is done by setting a route:

  / sbin/route add & lt; IP FAILOVER & gt; dev vmnet1

  2)

  virtual server: the guest operating system has to be told where to send its traffic: through its network interface to the host system, which acts as a router.

  file interfaces:

  Auto eth0

  iface eth0 inet static

  address & lt; IP FAILOVER & gt; machine virtual # address

  subnet mask 255.255.255.255

  / sbin/ip post-up route add default dev eth0

  After that I do:

  /etc/init.d/networking restart

  I received the message: duplicate

  Can you help me?

  THX

  Oscar

  There is therefore no problem?

  If I write ifconfig, I guess to get a response similar to the following:

  eth0 Link encap HWaddr 00:80:5F:C7:66:03 inet addr:192.168.0.3 Bcast:192.168.0.255 mask: 255.255.255.0 inet6 addr: fe80::280:5fff:fec7:6603 / 64 Scope: link UP BROADCAST RUNNING MULTICAST MTU:1500 metric: 1 RX packets: 417078108 errors: 6 dropped: 0 overruns: 0 frame: 6 TX packets: 203880741 errors: 2 dropped: 0 overruns: 0 carrier: 2 collisions: 0 txqueuelen:1000 RX bytes: 3137394533 (2992,0 Mb) TX bytes : 2632220621 (2510,2 Mb) interrupt: 5 Base address: 0 x 7400

• Image rejected because refusal of intellectual property

  Hello

  So, I submitted this image and dismissed due to the refusal of intellectual property

  Painted Ladies by astroprojector - Photo 93593623 / 500px

  However, in similar image search, I found there are a lot of images more like my who were accepted. Click on this link.

  Pictures free rights, photos, and graphics. Adobe Stock

  There is no explanation about what intellectual property is the problem and why the other images have been accepted? These images are correct release property, or images just arbitrarily approved or rejected?

  Thanks for your patience so I checked on that. The picture you posted of painted ladies it turned was acceptable to use and has been put online by the moderation team.

  The two examples you have posted most recently are impressive pictures. We cannot sell them for commercial use, with the prominent Union Bank logo on the building however. I recommend out clone as well as all the other logos you can see in the image and submit it again for a second review.

  Kind regards

  Mat Hayward

• Validation of intellectual property question

  Hello
  
  Referring to the Sub statement of the OAS best practices guide
  
  Oracle® Application Server Best Practices Guide
  10g (10.1.4.0.1)
  B31762-02 part number
  
  http://download-West.Oracle.com/docs/CD/B28196_01/core.1014/b31762/accessmgr.htm#CJGDJCIG
  
  
  Chapter: 2.2.1 using the Validation of IP, HTTPS and secure Cookies in order to mitigate the risk of an attack of Cookie response
  
  "Oracle recommends that you always enable validation by IP limit the risk of a response cookie.
  attack. If exceptions are necessary, for example, when you deploy by using a reverse proxy topology,
  to ensure that only allowed IP addresses are included in the list of exceptions. Avoid
  always turn off IP validation. »
  
  We turned off IP validation on all of our Web servers for 2 reason below:
  
  1. we do authentication on a different server (URL redirection in the authentication scheme)
  2. We also do authentication on the IIS server and weblogic server.
  
  Question:
  (1) to activate this IP Validation on 'ON', add the IP address of all the location where the cookie is created or updated?
  
  (2) if that's the case, then that includes all the Web server host, the IIS server that create the obssocookie?
  
  Appreciate the comments.

  It is difficult to answer without knowing your topology.

  If you think about it this way, it should help you answer your own question:

  The IP validation is the process of comparing the IP address of the client with the value of the intellectual property in the ObSSOCookie. The value of the cookie is the IP address of the HTTP client when authenticating.

  Validation of off means IP - regardless of the IP address from where a connection to an HTTP server protected WebGate originates, no comparison of the value of intellectual property to the IP in the ObSSOCookie will happen.

  The IP validation on means - the client IP will always be compared to the value of the cookie. If they are not the same, it is assumed that the cookie is reproduced by an invalid client and session (cookie) is not valid.

  IP Validation on way to exceptions: Do IP Validation EXCEPT when the IP address of the client matches a value in the list of exceptions.

  Mark

• Violation of intellectual property

  Hello. These 2 images have been refused because the 'Violation of intellectual property", but I don't see anything unusual and of course are my photos.

  

  @Marlon buildings in the top picture are clearly identifiable and as private property, you would need to obtain a release of property signed by the owners before you can sell the property for commercial use images. In the same image, the name of the boat is also visible and identifiable to that effect a release of the property would be required for that as well.

  The boat to the bottom image is identifiable by the name on the side. Try cloning try and try again. You can find a better result.

  Good luck!

  Mat Hayward

• How to decide if a selected Flash object is the object of the right

  Hello

  I do a point-and-click Flash game and the objective of the game is to click on the right objects in a room. Say that if the main character says 'find my chair', and the player clicks on the Chair, it's the right object and an audio file is read. If the player clicks on a spoon, it's the bad object and an audio file is read. My question is: How can I do this in Flash (in ActionScript, right)? I did a different layer for each object.

  First you need something that identifies the object that you click and store this information for the purpose of comparison.  Then, you need to have something assigned to each element that has the same exact information are entrusted to him.  If you are using AS3 then you can use a listener of events like MouseEvent.CLICK to clicks and then make use of the MouseEvent currentTarget property to isolate the object that was clicked.

  Suppose you have a movieclip with an instance name of Chair.  You can check for the name of this object against the current name of the object that should be clicked...

  var correctObject:String = "Chair";  You EF it dynamically sort

  chair.addEventListener (MouseEvent.CLICK, testObjectClicked);

  spoon.addEventListener (MouseEvent.CLICK, testObjectClicked);

  function testObjectClicked(evt:MouseEvent):void {}

  if(evt.currentTarget.Name == correctObject) {}

  correct response process

  } else {}

  incorrect process

  }

  }

• Lost 'Create Playlist' in the right click menu

  I was pleasantly surprised, sometimes, back to find that I could click with the right button on a mp3 file on my mp3 player attached and get a "Create the Playlist" item in the right click menu and click on it to get a reading on the player list. Some how I lost this menu item and can not get it back. Someone knows how to do this? I am running Win 7-64.

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it looks that you are having problems with missing option to create Playlist.

  1. What is the brand and model of the MP3 player?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the System Restore to an earlier date and check it.

  System restore

  Answer to us if you are having problems with the Playlist to create or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Problem with the 2.0 (1.0) Spry menu bar re - CSS

  Hello:

  I'm having some trouble with a Spry (horizontal) 2.0 (1.0) menu bar I created.  Initially, I thought the problem was in what concerns the problems of rendering on IE 6.0, but the problem seems to be more general than that, and I came to believe that this has to do with the CSS created by the browser Widget and changed once imported in the Web page.  That's why I chose to post my question here rather than on the spry page.

  I leaned on the tutorial provided by David Powers (Bayside.css) and in addition any other documentation regarding the Spry UI bar menu.  The problem appeared as one of the 6 IE rendered page with a gap that is created when the menus appear, so push down the divs that appear below the page.

  However, through a laborious process of trial and error, my problem now seems to be that when I export the CSS generated by the browser widget to an external style sheet (the style sheet General governing the whole of the site), he comes into conflict with other CSS styles for links etc.  The end result is that all the padding, background colors, background images, and colors of text are lost.  As long as the CSS is in the head that this does not happen.

  My thought is that this must have to do with the problems of specificity, inheritance, etc.

  The site is available at the following ADDRESS: http://www.aclco.org/testing/index.html.  In its current form, all the CSS associated with the menu bar is located at the head of each page.  (see CSS below).

  My question is I can set up a separate style sheet for the menu bar horizontally and have these styles applied specifically (and only) in the menu bar my only alternative is to work through the rest of the General style sheet and the work by problems of specificity/inheritance - that may be the "best" practice , but it may create another 'cascading' [sic] problems elsewhere.

  Advice or suggestions or directed readings (which would point to a solution) that could be offered would be greatly appreciated.

  Steve Webster

  The horizontal CSS governing the menu bar is as follows: (currently the following CSS is embedded in the web page's head)
  

  < style type = "text/css" >

  / * - Start styles horizontal Spry Menu Widget 2.0 (1.0) menu bar-* /.

  
  / * BeginOAWidget_Instance_2141544: #MenuBar * /.
  / * Values for skinning a basic through presets menu. If the default settings are not sufficient, most count should be done in
  These rules, except for the images used to down or to the right pointing arrows, located in the SpryMenuBasic.css file
  
  They take the following classes of widget for layout of menu (located in a "Preset")
  . MenuBar - applies to all menu bars - default is a horizontal bar, all submenus are vertical - level 2 subs and beyond are drop down to the right.
  . MenuBarVertical - vertical main bar; All submenus are drop down to the right.
  
  You can also pass in extra classnames to set your desired top-level menu bar layout. Normally, they are defined by using a predefined setting.
  They apply only to the horizontal menu bars:
  MenuBarLeftShrink - the menu bar will be horizontally "shrinkwrapped" be just big enough to hold his items and left-aligned
  MenuBarRightShrink - as MenuBarLeftShrink, but right-aligned
  MenuBarFixedLeft - set to a specified width defined in rule "." MenuBarFixedLeft', and left-aligned.
  MenuBarFixedCentered - Fixed to a specified width defined in rule "." MenuBarFixedCentered',.
  and centered in its parent container.
  MenuBarFullwidth - expands to fill the width of the parent container.
  
  In general, all the rules specified in this file are prefixed by #MenuBar so that they don't apply to instances of the widget inserted along
  with the rules. This allows use of multiple MenuBarBasic widgets on the same page with different layouts. Due to limitations in IE6.
  There are a few rules where this was not possible. These rules are so noted in the comments.
  
  */

  {#MenuBar}
  background-color: transparent;
  do-family: Arial, Helvetica, without serif. / * Specify the fonts on the bar menu and submenu MenuItemContainer, so MenuItemContainer.
  MenuItem and MenuItemLabel
  at a given level all use the same definition for ems.
  Note that this means that the size is also inherited from the submenus of the child,
  so be careful when using other than relative sizes
  100% on the fonts submenu. */
  make-weight: normal;
  font size: 17px;
  make-style: normal;
  padding: 0;
  
  }
  / * ATTENTION: because ID + class selectors do not work correctly in IE6, but we want to restrict these rules to all this
  instance of widget, we used the concatenated string classnames to our selectors for the type of layout of the menu bar
  in this section. These have very low specificity, so be careful not to overstep accidentally. */

  . MenuBar br {/ * using only a class, so there same specificity that the "."} MenuBarFixedCentered br' rule bleow * /.
  display: none;
  }
  . {MenuBarLeftShrink}
  float: left; / * shrink the content, but also to float the menu bar * /.
  Width: auto;
  }
  . {MenuBarRightShrink}
  float: right; / * shrink the content, but also to float the menu bar * /.
  Width: auto;
  }
  . {MenuBarFixedLeft}
  float: left;
  Width: 80em;
  }
  . {MenuBarFixedCentered}
  float: none;
  Width: 80em;
  margin-left: auto;
  margin-right: auto;
  }
  . MenuBarFixedCentered br {}
  Clear: both;
  Display: block;
  }
  . MenuBarFixedCentered. Submenu br {}
  display: none;
  }
  . {MenuBarFullwidth}
  float: left;
  Width: 100%;
  }

  / * Top level bar small objects - these actually apply to all items and get substituted for the submenus level 1st or successive * /.
  #MenuBar. {MenuItemContainer}
  padding: 0px 0px 0px 0px;
  margin: 0;     / * Zero margin on the containers of items. The MenuItem is the active area of hover.
  For most elements, we have padding top or bottom or border only on MenuItem
  or a child so we keep all tiled submenu with elements.
  Definition of this 0 avoids the "dead zones" to hover. */
  }
  #MenuBar. {}, MenuItem
  padding: 10px 10px 10px 4px;
  background-color: #000088;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/navigation%20Bar%20Segm ent - Dark.png);
  background-repeat: repeat-x;
  
  }
  #MenuBar. {MenuItemFirst}
  border-style: none none no none;
  }
  #MenuBar. {MenuItemLast}
  border-style: none none no none;
  }

  #MenuBar. MenuItem. {MenuItemLabel}
  text-align: center;
  line-height: 1.4em;
  color: #ffffff;
  background-color: transparent;
  padding: 0px 18px 0px 5px;
  Width: 10em;
  Width: auto;
  }
  . SpryIsIE6 #MenuBar. MenuItem. {MenuItemLabel}
  Width: 1em; / * Equivalent to min-width in modern browsers * /.
  }

  / * First level of submenu items * /.
  #MenuBar. Submenu. {}, MenuItem
  do-family: Arial, Helvetica, without serif.
  make-weight: bold;
  font size: 15px;
  make-style: normal;
  background-color: #000088;
  padding: 0px 2px 0px 0px;
  border-width: 0px;
  border color: #cccccc #cccccc #cccccc #cccccc.
  / * Border styles are replaced by first and last items * /.
  border-style: solid solid no solid;
  }
  #MenuBar. Submenu. {MenuItemFirst}
  border-style: none;
  padding: 0px;
  }
  #MenuBar. Submenu. MenuItemFirst. {MenuItemLabel}
  padding-top: 0px;
  }
  #MenuBar. Submenu. {MenuItemLast}
  border-style: none none no none;
  }
  #MenuBar. Submenu. MenuItemLast. {MenuItemLabel}
  padding-bottom: 10px;
  }
  #MenuBar. Submenu. MenuItem. {MenuItemLabel}
  text-align: left;
  line-height: 1em;
  background-color: transparent;
  color: #ffffff;
  padding: 10px 10px 10px 10px;
  Width: 240px;
  
  }

  / * Hover States for containers, objects and labels * /.
  #MenuBar. {MenuItemHover}
  background-color: #2E35A3;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/navigation%20Bar%20Segm ent%20Light2.png);
  background-repeat: repeat-x;
  
  }

  #MenuBar. MenuItemWithSubMenu.MenuItemHover. {MenuItemLabel}
  background-color: transparent; / * expose this propeller separately * /.
  color: #ffffff;
  }
  #MenuBar. MenuItemHover. {MenuItemLabel}
  background-color: transparent;
  color: #ffffff;
  }
  #MenuBar. Submenu. {MenuItemHover}
  background-color: #2E35A3;
  
  }

  #MenuBar. Submenu. MenuItemHover. {MenuItemLabel}
  background-color: transparent;
  color: #ffffff;
  }
  / * The submenu - first-level submenus properties * /.
  #MenuBar. {SubMenuVisible}
  background-color: transparent;
  min-width: 0%;  / * This prevents the menu being lean that the parent MenuItemContainer - but not available on ie6 nice to have * /.
  border-style: none none no none;
  }
  #MenuBar.MenuBar. SubMenuVisible {/ * menu bar horizontally for only * /}
  top: 100%;    / * 100% is at the bottom of menuItemContainer parent * /.
  left: 0px; / * "left" may need tuning according to borders or padding applied to the bar MenuItemContainer or MenuItem,.
  and your personal taste.
  0px align left drop-down list with the content of the MenuItemContainer area. Assuming you keep the margins 0
  on MenuItemContainer and on the parent MenuItem
  menu bar, which in fact equals the sum of padding-left MenuItemContainer & MenuItem align
  the drop-down menu to the left of the menu item label.*.
  z-index: 10;
  }
  #MenuBar.MenuBarVertical. {SubMenuVisible}
  Top: 0px;
  left: 100%;
  min-width: 0px; / * Do not neeed to match the width of the parent MenuItemContainer - elements will avoid total collapse * /.
  }
  / * The sous-menu--deuxieme submenu level properties and beyond - are visible to descendants. MenuLevel1 * /.
  #MenuBar. MenuLevel1. {SubMenuVisible}
  background-color: transparent;
  min-width: 0px; / * Do not neeed to match the width of the parent MenuItemContainer - elements will avoid total collapse * /.
  Top: 0px;    / * If you want, you can move this down a smidge to separate the top item "submenu s of menubar.
  It is really necessary only for the submenu on the first point of MenuLevel1, or you can make it negative to make the submenu
  vertically 'centered' about his call to * /.
  left: 100%; / * If you want to move the submenu on the left to partially cover the point of his call, you can add a margin to the left with a
  negative value to this rule. Alternatively, if you use the elements of fixed width, you can change this value on the left
  to use px or ems to get the desired offset. */
  }
  / * IE6 rules - you can remove these if you do not want to support IE6 * /.

  / * Note about several classes in IE6.
  Some rules above use several class names to an element of selection, such as "hover" (MenuItemHover) and 'a a submenu' (MenuItemWithSubMenu).
  * give the selector '. MenuItemWithSubMenu.MenuItemHover'.
  * Unfortunately, IE6 does not support using mutiple classnames in a selector for an element. For a selector like '. foo.bar.baz', IE6 does not take into account
  * all but the final classname (here, ".baz") and defines the specificity in consequence, with only one of these classs as significant. To work around this problem
  * problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate classnames for IE6, such as "MenuItemWithSubMenuHover".
  * Given that many of these necessary, the plugin does not generate additional classes for modern browsers, and we use the copies of CSS2 style class
  * syntax for that. Since IE6, both apply the rules where the
  * It should not and gets the specificity wrong too, we have rules of order carefully, then misapplied rule in IE6 can be overridden.
  * So we put first the multiple class rule. IE6 wrongly apply this rule.  We follow this with the single class rule that it would be
  * replace by mistake, by ensuring that the specificity of IE6 interpreted as is the same as the unique class selector, so the latter wins.
  * We then create a copy of the rule of multiple class, adding a "." SpryIsIE6' in the context of the class and to ensure that the specificity
  * the selector is high enough to beat the rule of single class in the case of "match of these two classes. We place the rule of IE6 at the end of the
  * block of css styling to make it easy to remove if you want to drop support for IE6.
  * If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
  * The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the need of IE conditional comments to these rules.
  */
  . SpryIsIE6 #MenuBar. MenuBarView. MenuItemWithSubMenuHover. MenuItemLabel / * selector IE6 * /}
  background-color: transparent; / * expose this propeller separately * /.
  color: #ffffff;
  }
  . SpryIsIE6 #MenuBar. MenuBarView. Submenu. MenuItemWithSubMenuHover. MenuItemLabel / * selector IE6 * /}
  background-color: transparent; / * expose this propeller separately * /.
  color: #ffffff;
  }
  . SpryIsIE6 #MenuBar. Submenu. Submenu / * selector IE6 * /}
  left margin:-0px; / * Offset at least part of a version of 'double upholstery' bug IE6 'double margin "* /.
  }

  
  / * EndOAWidget_Instance_2141544 * /.

  / * End Spry Menu Bar Widget 2.0 (1.0) Horizontal Menu Custom styles * /.

  
  < / style >

  The CSS for the site in general is reproduced below: (my belief is that it is a: link, a: visited, a: hover, a: active styles that may be in conflict).

  @charset "utf-8";

  
  {body
  Police: 100% Verdana, Arial, Helvetica, without serif.
  min-height: 0; / * this is necessary to overcome the "haslayout" bug found in Windows 7 in conjunction with IE8.  For more information see: URL - http://reference.sitepoint.com/css/haslayout.html * /
  margin: 0; / * It is advisable to zero, the margin and the filling of the body to hold element has a different default browser * /.
  padding: 0;
  text-align: center; / * This allows the centering of the container and overcomes an inherent bug in IE 5 * /.
  Color: #000000;
  list-style-image: none;
  background-color: #FCFCFC;
  
  }

  H1, h2, h3, h4, h5, h6 {}

  color: #000066;

  }

  a: link {}
  color: #151A 96.
  text-decoration: underline;
  }
  a: visited {}
  text-decoration: underline;
  color: #1B8DCD;
  }
  a: hover {}
  text-decoration: none;
  color: #F30A0A;
  }
  a: active {}
  text-decoration: underline;
  color: #151A 96.
  }

  #container {}
  Width: 960px;
  margin: 0 auto; / * margins (in conjunction with a width) auto Center the page * /.
  text-align: left; / * This setting overrides the text-align: center on the body element. */
  background-image:
  URL (.. / ACLCO%20Graphics%20-%20Web%20site%20Parts/Website%20Midsection%20_960.png);
  background-repeat: repeat-y;
  }

  #header {}
  padding: 0;  / * This filling is the alignment to the left of the items in the div that appear below. If an image is used in the #header instead of text, you can remove the padding. */
  
  Width: 960px;
  height: 332px;
  background-image:
  URL (.. / ACLCO%20Graphics%20-%20Web%20site%20Parts/Website%20Header_960.png);
  background-repeat: repeat no.;
  }

  
  #header h1 {}
  
  margin-right: 0px; / * zero setting of the margin of the last element in the #header div tag will prevent the collapse of margin - inexplicable space between divs. If the div has a border around it, this isn't necessary, which also allows to avoid the collapse of margin * /.
  padding: 0; / * padding instead of margin will allow you to keep the edges of the div element * /.
  display: none;

  }

  #header img {}
  display: none;
  }

  {#Main_nav_contents}
  padding: 0;
  margin-top: 0px;
  height: 39px;
  Width: 950px;
  padding-top: 275px;
  padding-left: 39px;
  z index: 3;
  
  }

  {#MenuBarVertical}
  margin-bottom: 50px;
  padding-top: 50px;
  padding-bottom: 200px;
  padding-left: 15px;
  padding-right: 15px;
  
  }

  
  {.mainContent_left}
  margin: 0; / on this div element right margin creates the column on the right side of the page - no matter how content div the sidebar1″ contains, the space of the columns will remain. You can remove this line if you want the #mainContent div text to fill the space of #sidebar1 when the content of #sidebar1 is complete. */
  padding-left: 30px;
  padding-right: 20px; / * Remember that the fill is space inside the box of div and margin is the space outside the div box * /.
  Width: 600px;
  float: left;
  }

  
  {.sidebar_right}
  float: right; / * because this element is floating, it takes a width * /.
  Width: 270px; / actual width of this div, in browsers comply with the standards, or the standard mode of Internet Explorer includes the padding and border in addition to width * /.
  top of the margin: 30px;
  margin-left: 0;
  margin-right: 10px;
  font-size: 90%;
  
  }
  
  {.mainContent_right}
  margin-left: 10px;
  padding-left: 30px;
  padding-right: 20px;
  Width: 600px;
  float: right;
  
  }
  
  {.sidebar_left}
  float: left; / * because this element is floating, it takes a width * /.
  Width: 270px; / actual width of this div, in browsers comply with the standards, or the standard mode of Internet Explorer includes the padding and border in addition to width * /.
  top of the margin: 30px;
  margin-left: 30px;
  margin-right: 0;
  overflow: hidden;
  font-size: 90%;
  
  }
  
  {.main_content_centered}
  Width: 650px;
  margin left: 155px;
  
  }

  {.main_content_centered_header}
  margin left: 75px;

  
  }

  {.sidebar_textbox}
  margin: 0px;
  Width: 260px;
  padding: 2px;
  }

  
  {.sidebar_textbox_header}

  Width: 255px;
  height: 58px;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/portrait%20Textbox%20he ader.png);

  }

  {.sidebar_textbox_background_middle}

  Width: 255px;
  padding-top: 12px;
  padding-bottom: 10px;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/portrait%20Textbox%20Mi ddle.png);
  background-repeat: repeat-y;
  }

  {.sidebar_textbox_content}
  / * The width and filling are fixed as follows to reflect the quirks in the rendering of the browser while ensuring that the text is contained in the background of the text box * /.
  
  Width: 230px;
  padding-left: 20px;
  padding-right: 40px;
  }

  {.sidebar_textbox_footer}

  Width: 255px;
  height: 64px;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/portrait%20Textbox%20Foo ter.png);

  }

  #issues_menu a: link {}
  color: #151A 96.
  text-decoration: none;
  make-weight: bold;
  
  }

  
  #issues_menu a: visited {}
  color: #151A 96.
  make-weight: bold;
  text-decoration: none;

  }

  #issues_menu a: hover {}
  color: #F30A0A;
  make-weight: bold;
  make-style: oblique;
  text-decoration: none;
  
  }

  #issues_menu a: active {}
  color: #151A 96.
  make-weight: bold;
  text-decoration: none;
  
  }

  {#archives}
  padding-top: 15px;
  padding-right: 15px;
  padding-bottom: 20px;
  padding-left: 0px;

  }

  {.landscape_textbox}
  Width: 500px;
  margin-right: 0px;
  margin left: 30px;
  padding-top: 35px;.
  padding-bottom: 25px;
  make-style: normal;
  make-weight: normal;

  }

  {.landscape_textbox_hdr}

  Width: 500px;
  height: 38px;
  margin: auto;
  padding: 0;
  background-image:
  URL (.. / ACLCO%20Graphics%20-%20Web%20site%20Parts/Landscape%20Textbox%20Header.png);
  
  }

  {.landscape_textbox_middle}

  Width: auto;
  margin: auto;
  padding-top: 12px;
  padding-bottom: 12px;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/landscapte%20Textbox%20 Middle.png);
  background-repeat: repeat-y;
  
  }

  {.landscape_textbox_content}

  Width: 450px;
  Padding: 25px;
  }

  {.landscape_textbox_ftr}

  Width: 500px;
  height: 44px;
  margin: auto;
  padding: 0;
  background-image: url (.. /ACLCO%20Graphics%20-%20Web%20Site%20Parts/Landscape%20Textbox%20F ooter.png);

  }

  
  #footer {}
  padding: 0; / * This filling is the alignment to the left of the items in the div that appear above him. */
  Width: 960px;
  height: 222px;
  background-image:
  URL (.. / ACLCO%20Graphics%20-%20Web%20site%20Parts/Website%20Footer%20_960.png);
  background-repeat: repeat no.;
  
  }

  #footer p {}
  margin: 0px; / * zero setting the margins of the first element in the footer will avoid the possibility of the collapse of the margin - a space between the div tags * /.
  padding: 0px; / * padding on that element will create space, just as it would the margin, free margin collapse question * /.
  text-align: center;
  margin-left: 50px;
  right margin: 50px;
  padding: 10px;
  font size: small;
  }
  
  #footer h5 {}

  text-align: center;

  }

  .fltrt {/ * this class can be used to float right to the item in your page.} The floating element must precede the element it should be next to the page. */
  float: right;
  left margin: 8px;
  }
  .fltlft {/ * this class can be used to float an element on your page to the left * /}
  float: left;
  right margin: 8px;
  }
  .clearfloat {/ * this class must be placed on an element div or break and should be the last item before closing a container should completely contain a float * /}
  Clear: both;
  height: 0;
  font size: 1px;
  line-height: 0px;
  }

  
  {.dropcap}
  display: block;
  float: left;
  line-height: 80%;
  font size: 250%;
  make-weight: bolder;
  color: #000066;
  Padding: .1em .03em 0 0;
  }

  {.red_arrows}
  list-style-position: outside;
  list-style-image: url (.. / ACLCO%20Graphics%20-%20Web%20site%20Parts/Arrow%20Large.png);
  }

  {.blue_bullets}
  list-style-position: outside;
  list-style-image: url (.. / ACLCO%20Graphics%20-%20Web%20site%20Parts/Bullet%20Medium%20Full.png);
  }

  attention {}
  color: #F30A0A;
  font-size: x-large;
  do-family: Georgia, "Times New Roman", Times, serif;
  make-style: italic;
  Police-weight: 900;
  }
  
  {.attention_small}
  color: #F30A0A;
  font size: large;
  do-family: Georgia, "Times New Roman", Times, serif;
  make-style: italic;
  Police-weight: 900;
  }

  .table {}
  table-layout: fixed;
  
  }
  . Blue {}
  Color: #00F;
  }
  #container .mainContent_left p .blue {}
  color: #0303A 0;
  }

  Hello Steve

  Well, I checked your page in IE6 and it seems to work fine for me except that here seemes to be a little space between

• items that may be due to lack of support of .png?  In other words, if there is a little transparency on the edge of the chart?  Maybe it's more a shot in the water on my part!

  Now my suggestion to you would be to mark this thread as closed/replied and after again with just the link to the page and your question.  Short is sweet.

  Martin

• Statement of apex management 4.2: intellectual property protection

  4.2 review and don't see not where the below stated guidance is addressed. While I found the ability to package an application with install sql scripts and others. I can't find where there was the possibility of protecting intellectual property rights. I missed something or has simply not addressed or included? IE: there should be the possibility to export and install an application read/only run with or without the ability to circumvent or modify administrator.
  
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-sod-087560.html
  
  Oracle Application Express
  Management representation statement
  Last updated: April 18, 2012
  ..
  Application deployment - provide more opportunities for the packaging and distribution of APEX applications to improve the protection of intellectual property rights and to facilitate customization.
  ..

  Hi Johnny,.

  Due to time constraints, we do not unfortunately have to address the function of Application deployment, as indicated in the declaration of the Direction you provided a link to APEX 4.2. However, it is our intention to address this feature in a future version of Application Express.

  Kind regards
  Hilary