Provisioning - Creating a dynamic username based on data of the user

Similar Questions

• Set initial value as the number of sequence/date/from the user

  Hi guys, I created a datablock and set up the user interface to allow users to insert all the data they need, however my table has a:
  
  ID - which is uniqe with each entry of the table is then gernerate by a sequence (that I created on the database), but when I put seq.nextval in the initial value on the datablock it says that I can not do that, so how can I use the sequence to insert the value in this field in the database. It's my first key in my whichobviosuly database my users cannot enter data for, on the contrary, it is generated automatically.
  
  User - in the same way in the datablock is a user field that has the user that inserted record, I know I can set the default for this field, but how to make the user automatically insert through forms on the database.
  
  Same again how put SYSDATE is automatically entered in the field date when the user submits the file?
  
  Any help on this would be GREATLY appreciated.
  
  Thanks in advance.
  
  Published by: user13390506 on August 5, 2010 04:11

  The DUAL table:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/queries009.htm#sthref3198

  With: new, you reference the column should be inserted (in a trigger to update you: old and: where new: old contains the value before and: new value after the update of the column)

  Regarding your real problem: without a few pieces of code fails and you did, it's a little difficult to say what happened here. If you could get better answers by sharing.

  Sharing also the Versions of database (4 digits) and Versions of forms is important in order to obtain a response apropriate.

  Anyway: you seem to be new to the whole forms / SQL / PL/SQL stuff, so I might suggest:
  http://Tahiti.Oracle.com is a very good starting point for SQL and PL/SQL. This isn't a RTFM but rather a Council. Once you got used to you will like it. For my part, I could not live without tahiti: D.

  Cheers.

• My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• The data of the user of a Flex application recovery

  Hello! I need to use an application Flex (not a form guide) in the workspace.

  I am able to make a Flex application that is activated in the workspace, but I do not know how to retrieve data from the user.

  I know that if I use a form Guide, I can use a custom renderer Service that can retrieve data from the user, but how can I do the same if I don't use form Guide, but a pure SWF (variable type is form)?

  Thank you

  Alessio

  There is a way you can get the information of the user of the Flex application. You can get the user name, e-mail address and such things.

  You can see the following blog on how to do it: http://michael.omnicypher.com/2008/12/get-current-user-for-workspace-enabled.html

  If you need other data, you may need to make a call service or remote Web access once the Flex form has loaded.

  In the next version of LiveCycle, you will be able to use the same concept as the service rendered.

  Jasmine

• In the date picker, how can I default to select * dates if the user has...

  In the date picker, how can I default to select * dates if the user does not select a date.
  Thank you
  Doug

  Doug,

  Now lets say l want everything
  

  Could you post some sample data and the output you want to get... ? It would be very easy to understand the requirements...

  When you mean everything, I guess you need all possible dates between date1 and date2.

  You can use... (to asktom.oracle.com).

    1  select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
    2    from ALL_OBJECTS
    3    where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
    4*                     to_date('12-jan-2009','DD-MON-YYYY') +1 )
  sql> /
  
  TO_DATE('
  ---------
  12-JAN-09
  13-JAN-09
  14-JAN-09
  15-JAN-09
  16-JAN-09
  17-JAN-09
  18-JAN-09
  19-JAN-09
  20-JAN-09
  
  9 rows selected.
  
  For your case, since you have date1 and date2...
  
  select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
    from ALL_OBJECTS
    where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
                      to_date(:p12_date1,'DD-MON-YYYY') +1 )
  

  Should work... in my opinion... Have not tested the other by their Summit.

  Is that what you're looking for... ?? If no, please give details...

  Thank you
  Rajesh.

• How to call user B to drop/create an indexes on a table owned by the user has?

  Hello!
  We have the following situation:
  = > user B has a table that has an index
  = > user connects to the database and must have sufficient privileges or the ability to drop/create an index for a table owned by the user B.
  Since there are several different schemas in the database, it is not possible to grant the privilege "to create any index' or 'delete any index '.
  for the user.
  = > to do even more complicated: the necessary procedure must not belong to user B
  
  I tried to solve this problem with a stored procedure (which belongs to user C). Why do we use user C? C the user has several packages,
  procedures and functions that get used by other users (for example for purposes of logging, refresh materialized views,...)
  
  So the logic is:
  = > user A calls user procedure C. In this procedure the call "run immediately" ALTER SESSION SET CURRENT_SCHEMA = B' "»
  is executed successfully. The next step, the < drop index B.i1 > statement would get executed. But this statement fails with the
  exception ' ORA-01031: insufficient privileges ".
  
  If this procedure is created in the schema of the user B then everything works fine - but because of our current design of the database, this procedure
  must belong to the user C.
  
  Does anyone know a solution to this problem?
  
  Any help will be appreciated
  
  Rgds
  JH

  I think you need the privilege DROP_ANY_INDEX directly to user C.

• How to effectively create a single waveform based on data from two other waveforms?

  I have a table 1 d of waveform with size = 4 which contain data of voltage potentiometer "gross".  I need to handle index 0 & 1 waveform data using the formula below to calculate a single waveform of angle data.   I need to do the same for the 2 & 3 index because it is a redundant circuit.   I was hoping that the formula node can operate on whole berries and even if it may take a table as input, it asks me to the array index in the formula so that it becomes a scalar value.

  As the formula is quite complex, I would like to keep as text, but run automatically on each point of the two input tables.  This math is done online with pulling data from a data acquisition and so I need it to be as effective as possible, so that I do not spend too much time on it and likely to overflow the buffer DAQ.

  The naïve solution would be to wrap nodes formulas with curls, but I don't know if it is this is an effective way to do it.  I'd like suggestions on how best to address this issue.

  Thank you!

  

  Here's how I would do it with no formula requires knots or loops:

  

  If you want to use the formula node, you can then run a loop inside each node formula while the index of you through the berries.  The difference in performance between the nodes of the formulas and graphic approach expected to be negligible.  Note that my approach assumes that the table sizes are the same.  You can also create a sub VI to contain the math so you don't have to maintain two copies of the same piece of code.

  Chris M

• [ADF, JDev12.1.3] Which is the right place (for example, bean or AM) to create and store secret data that the user is unable to intercept?

  Hallo,

  in my page, when the user clicks on a button, I'have run an operation and in particular generate a code PIN and password that the user must not not know/interception.

  The STEM must be kept "secretly" in the comic book.

  I created a function to generate the PIN code in the 'Utils' to the ViewController project class.

  In the managed bean associated page I would deal with the click of the button through its ActionListener function.

  In this function I would also generate PIN call the "generatePIN" works and finally store the PIN in the comic book.

  Is the bean, the right to 'place' where build and store the PIN in the database?

  Maybe I'd better to generate the PIN and then store it throug a function of the module of the Application?

  Thank you

  Federico

  Well, he should go to the model because it is part of business process and is not part of the presentation of data.

  (AMImpl, VOImpl, or same ViewRowImpl are good places to write such code)

  The STEM must be kept "secretly" in the comic book.

  I don't know what that means exactly.

  Aspect of security, no matter where you place code (in the model or ViewController) because both are executed inside the Java virtual machine server-side.

  If you need to secure communications between WLS and DB, then open the database by using the SSL protocol connection (or create the stored procedure and generate PIN directly in db)...

  Dario

• Dynamic transformations (Case statements) conducted through the user interface

  Hello

  I have a vision that a lot of business logic with values coded hard and would like to re - design the view make the transformation of dynamic business logic. I would like to give an example to tell the requirement in detail with the example below.

  Example SQL view: -.

  SELECT

  A.EMP_ID,

  A.EMP_NAME,

  BOX WHEN A.STATE = 'CA' AND A.DEPT_CODE = "C123" THEN 10 '

  WHEN ELSE A.STATE = 'NJ' AND A.DEPT_CODE IN ('N111', 'N454') AND A.GRADE = 'AAA' THEN '08'

  ELSE END '00' AS TAX_RATE,

  CASE WHEN A.JOIN_DT > = '20010101' OR (A.EMP_ID IN ('E134', "E456") OR A.DEP_CDE IN ('C222', "F222")) THEN '30'

  WHEN of OTHER A.JOIN_DT < '20010101' OR A.EMP_ID IN ('J133', "K556") THEN '20'

  ELSE '10' END AS BONUS_PERCENT

  A.ADDRESS

  FROM EMP A

  WHERE A.END_DATE > = '20000101'

  AND NVL (A.DEL_FL, 'N') = ' don't

  AND EXISTS (SELECT DEPT 1 D)

  WHERE D.EMP_ID = A.EMP_ID)

  Result: -.

  
  

  I wish I had the TAX_RATE and logic BONUS_PERCENT dynamically generated fields which has a lot of statements of case and hardcode, where the USER can change the logic and its values according to rank.

  To do this, we can design a table EMP_BUS to have fields that can be modified and the transformation of the UI logic. Please share your ideas in the design of the table or the applicable...

  Thank you in advance.

  Hello

  One way is to have all the settings defined by the user that is stored in a global Table Temporay and join at this table in your point of view.  The advantage of a global temporary Table is that each session has its own set of parameters which does not interfere with the other, so you can have multiple sessions using the view at the same time, and everyone will see the results based on its own parameters.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• How to extract specific data from the user to view?

  Hello

  I have a requirement I need to display only the Session_user-specific data in the table. Scenario is that if the user belongs to a specific region should be able to see data for that specific region only.

  I think passing the session_user view query name but don't know if it of possible or not. If possible how to do this.

  What is the best way to achieve this?

  Thank you

  Angelica

  Hello

  If you use the ADF for authentication security, the user name is then accessible from the context of the ADF in British Colombia ADF. You can then

  1. create a view of the criteria in British Colombia ADF to a specific view

  2. set the display criteria to use a variable binding

  3. use groovy to add the value of the bind variable

  -set the type of value of 'Expression '.

  -Add adf.context.securityContext.userName

  4. go in the Module--> Application data model

  5 Select the instance of the View object

  6. press on "change."

  7. Select the view test

  If you download the example in this article: Oracle ADF: security for everyone so you see that users have a profile page containing data for the authenticated user. Sound by using the method described above

  If you do not use ADF security you can always use this approach. Instead of providing the value of the variable bind using Groovy you can run the view object using executeWithParams operation in this case, you can read the value of the authenticated user to the side view ADF. The binding variable would not be set to the Expression in this case though.

  Frank

• How to clear endpoint and restore only the data of the user

  I saw in another post the recommendation to the question of the person "you centralize endpoint to obtain profile information, then a provision of the base instead of an entitlement that would completely erase end point and then just restore user data and settings App at the back of the device.» That's just what I want to do, but it seems I'm missing something. I can't base available layer the CVD unless I'm deleting it inventory so it appears in Pending Devices. So if I delete and wipe it on, how can I get user data and App settings to restore? Thank you.

  All the steps:

  1. Centralize/sync the device what parameters of data and user applications you need to preserve
  2. Archive the CVD once centralization is complete.
  3. Available to the base to your device (and application layers)
  4. Remove the inventory of CVD newly put into service/layers so it appears in Pending Devices
  5. Reassign the CVD of archive (right click and select assign device, follow Assistant) and select 'data and settings user only '.

  It's not immediately obvious (maybe only for me) the newly developed CVD should be removed from the inventory, so it would seem in Pending Devices, allowing him to be selected for restoration. Thanks for the good idea, if.

• How to get the data of the users that belong to a particular Exchange mailstore

  Hello
  
  I need to get the details of all users that are provided in a certain message Exchange in IOM store. I can get it by querying the database?
  
  Kind regards
  Radhika

  , But there must be a table in the database that could store data in form for the parent process. You can get this name from the table of definition of Exchange Provisioning process in console design itself.

  But this option stores the details for which the resource Exchange is requested to the user only.

• How to get the default path for the data of the user to /store directory?

  I am writing an app that will create files on the device to the user.  These are not files that the user will want to transfer autour so I would store on /store instead of on the SD card.  I was wondering if there is a sort of. getUsersDirectoryPath() API which tells me that the way I should use to store these files.  That way if something changes on a later version of the operating system I don't have borken my application to hardcode it.

  any information would be appreciated,

  -Henry

  This can help you make your choice...  On OS 4.6 and higher, the user's home directory is exposed as a drive letter on the desk when the device is connected via USB.  This makes it unavailable for your application.   I use the persistent store specifically for this reason.

• Handler process events post is not kept up-to-date of the user confidently Recon

  Hi, I have this code for an event handler for post-processing, and I need for a reconciliation of trust.
  I can see all the "System.out.println" works well in the newspaper, but there is no update in the created users.
  I need to update the user manager key, so I get ManagerID and search among employees to be one with the employee number and place it in the field Manager Key.
  This code works very well as a preprocess in EventResult to create users in IOM, but no results for PostProcess in BulkEventResult of a reconciliation of trust.

  Here is the code:

  public BulkEventResult run (long arg0, long arg1, arg2 BulkOrchestration) {}

  System.out.println ("Executing method BulkEventResult");
  HashMap < String, Serializable > [] params = arg2.getBulkParameters ();
  for (int i = 0; i < params.length; i ++) {}
  < String, Serializable > HashMap orchParam = params [i];

  String managerID = getParamaterValue (orchParam, "ManagerID"); Gets the 'Manager' of the user created.

  System.out.println ("Manager ID is:" + managerID);

  If ((managerID! = null)) {}

  < User > list list = findManager (managerID); Records in a list, the key Manager "ManagerID.

  
  If (! (list.isEmpty ()) |) (liste! = null)) {

  String managerKey = list.get (0) m:System.NET.SocketAddress.ToString (); Converts the item in the list a string.

  managerKey = managerKey.substring (managerKey.indexOf ("=") + 1, managerKey.length () - 1);

  System.out.println ("key management is:" + managerKey);

  Arg2.addParameter (UserManagerConstants.AttributeName.MANAGER_KEY. GetId(), Integer.parseInt (managerKey)); Updates the user manager key.

  }

  }

  }

  System.out.println ("development of method BulkEventResult");

  return new BulkEventResult();

  }

  I'd appreciate any help. Thanks in advance!

  Be awared that will give the UserManager in another orchestration as well

  modification of the user. But in general, it will be

  User user = new User (strUsrKey);

  user.setManagerKey (strMgrKey);

  UserManager usrMgr = Platform.getService (UserManager.class);

  usrMgr.modify (user);

  12:41, community-admin Tuesday, December 9, 2014

• Is there a way to export the data of the user (for example, the duration of full course) to the specific e-mail address?

  I'm building an internship with about 100 slides and about 30 quizzes. The single variable at the moment is the learnerName to customize the user experience. Does anyone know how to document how long it takes for a given user complete such a course? I thought the clock Widget could be changed, but have had no luck.

  Ideally, I wish I could have a learning stage and have some kind of output or export which would include the learnerName variable (which is a text entry box) as well as the duration of the slide from the opening to the last slide to be sent to a specific e-mail address. All this "activity" would be behind the scenes and not known to the user / learner.

  Any help is welcomed and greatly appreciated.

  
  See you soon!

  -Jesse

  You need custom programming to pull this off.  Captivate does not have with native functionality.

  You must create a widget or a lot of Javascript on the side of Captivate, and you need some programming as well on server side.