Publish the project Cp6 on DVD

Similar Questions

• How to publish the project web site on the internet?

  I already have the service of the host, the registered URL, and I did not quite sure about to publish the project in VS 2010 on the internet. Thank you

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en/

• How to publish the project as SCORM in Captivate 9

  I found an option to publish the project as a SCORM, but can't remember how to access the option, help!

  You must configure the Reporting in Quiz section, preferences. Which edition you will automatically get a SCO.

• Why my picture is very blurry once I publish the project?

  I inserted two pictures in my project (8.01 Captivate) and they are the two fuzzy relly once I've published the project. Any format I save it, still blurry. I have change the pixels of the picture and reinserted and still nothing.  Any ideas on how to fix the problem?  frustrated...

  You did a lot of scaling, ways took my Calculator: your original image is 1700x2200px! And what is the resolution of your slides? Typical screen resolution is only 72-96 dpi. And a mobile browser has a typical width of 300-360px... The photo is taken up all that space, even in this case it was too much.

  But JPEG is a compression format with loss, what quality did you choose? In Photoshop, resize your photo to the resolution you want it have in Captivate and try again with a non-une as PNG24 lossy compression.

• Navigation problem: published the project navigation fails.

  Hi, I have a problem of navigation: a published project navigation fails after a certain landslide. Slide all have the same setting. What can be the reason? Thank you

  Hi Erik,

  Thank you for all the suggestions. With their help, I could finally identify the problem is with the slide itself and not with Captivate settings. The in-depth slide comparison revealed that one of the links incorporated into the problematic slide caused the stop in the navigation. After the removal of this hyperlink navigation has worked fine. But I can't determine why the hyperlink has been corrupted, the project can be launched very well.

  I thank very you much for all the help!

• Video not appearing is not in published the project, but show up in preview

  Hi guys

  I have a video in one of my projects and it plays very well when I do a preview in the browser

  and I open the html code of the video player appears and playback of the video.

  How ever once I publish the app the video file is not released with the rest of my work so he is unable to play the video

  Am I missing a setting? I have to publish to the web, because the project will be downloaded on phone Gap build

  When you publish one project, the other files that you did manually place it in the folder (such as video files), enters the published files, you must copy the video from the source files for the published files

• Publish the project, the video does not work

  The project works very well when it is not published.  When I publish it, sometimes just with a line that looks like it is streaming.

  Please, install the hotfix released in October 2012. It fixes a lot of bugs and is free. Current version should be 6.0.1.240.

  Lilybiri

• Impossible to publish the project media with a calendar?

  I'm trying to publish a project as F4V (converted to mp4) as a demo of the software (voice). That's why I need to keep the timlines I put in place in the captivate project, but it seems that every time that I export the project and media, I lose the timelines.

  I would add that there is full-motion capture, which would need to be there so that are rather than be a certain period of time seems to be using a value default (3 seconds?) period of time.

  I hope that it is something in the settings that I can answer.

  Welcome to our community

  I'm lost when you say you must publish "with a calendar.

  I'll take a stab and wildly guess you mean that now descends once you publish? Note that there are several options when publishing as F4V.

  F4V video

  F4V (with fixed rate)

  I've seen other posts where audio incompatible is present and the recommendation was to use F4V with fixed rate. So maybe try that?

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Publish the project with a Transparent background?

  Are there ways to publish with a Transparent background to your project?  I looked in the box of the master slide and can't find a way to make a transparent background, he always wants something.  Let me know if you are unable to do.  Thank you

  No, this is not possible.

• Publish the project to a different server

  Hello...
  
  I have WLS (11g) with a domain name with two managed servers:
  Server1 running on port 8011
  Server2 running on port 8022
  
  I use sbconsole to import my configuration (JAR file exported from ofm_osb).
  The resources are made available on the first server managed without any problem (e.g.: http://localhost:8011/proxy/dummyService? wsdl).
  
  Now, I would like to make my second project available on the Server2 (e.g.: http://localhost:8022 / myResources), but I didn't know how to accomplish this.
  Am I missing something here?
  
  Tanks in advance.

  OSB does not provide the possibility to selectively deploy services on a particular server in the domain.
  For Clusters, when you import and activate, objects/services are deployed on all servers managed cluster of OSB.
  For the topology not clustered, http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15022/intro.htm#CEGFIAEG
  You can have only one server of OSB in the field. Another managed server in areas that can accommodate other products (SOA/EM etc.)

  Hope this helps
  Maury

• Link on the Web page does not work in published HTML project

  I use 8.01 Captivate and created a project with a link to a URL of page web (I did by the insertion of the text links).  It works perfectly when I publish as an executable.

  Customer has requested that we publish now in the form of HTML/SWF file.  The link URL (set to open in a new window) does not this version.

  I changed the link at a click box with the action to open the web page in a new window.  Again, it works when you publish an executable file, but not when I publish to HTML.

  The OUTPUT of course links also do not work in the HTML version.

  We use IE11 to launch the HTML file.

  Any help will be greatly appreciated!

  Thank you!

  Hi Betty,.

  It seems to be a problem with the Flash security settings.

  Please follow the steps (these steps are for Firefox and IE) below:

  1. Publish the project to a folder on the c drive.
  2. Open the html of the published output.
  3. Do the right click on the screen and go to global settings.
  4. Go to the advance tab.
  5. Scroll down and click on trusted location settings.
  6. Click Add > add folder and navigate to your published folder and add it. (You can also add full lecteurC so that you don't have to do it again for all projects)
  7. Click on confirm and then close it.
  8. Now, re - open the html file and try to view attachments.

  These parameters are only made when you view the content locally. If you place the output on any server, then you must not make these settings.

  Hope it works... !

  Kind regards

  MILIN

• Some files of presentation that links do not when the project is published and downloaded on the Web site

  Hi all

  I ran into an interesting question and have not been able to solve for a long time... wonder if anyone has any input to share.
  We have created a program of training with Captivate 5 and included within some developed with HotPatotos6 learning activities. Everything works fine, however, when I publish the project I get this warning message:

  The following files/projects are related to the open project. The related files/projects may require export.

  Path:

  [C:\Documents and Settings\maurom\Desktop\CST_III\follow_up.htm (slide 17)]

  It is also important copy all referenced files and projects with their file HTML in output folder.

  I made sure bring more in the folder buplished times the file display htm and HotPatato6 working files and everything works fine when I run the project to the folder on my computer. However, the problem starts when I load the project on the training site. On the site, everything still works perfectly, but these files developed htm wit Patatos6 Hot do not open. At first it seems right that there is a broken link, wait until the link is here.

  Someone has suggestions ideas to share on this?

  Thank you

  :-)

  If I read this right, you have something on slide 17 which points to this .htm, is that correct?

  It seems that the object is pointing to the location on your drive C, an absolute location.  When the .swf is on the web server, it seeks a C:\documetns and folders\etc etc. on the server to training.

  You have to give a relative path.  If you put the .htm files in the same directory as your .swf, you should be able to simply point the target to the .htm itself, remove all C:\documents and settings\etc etc.

• Change the name of the project that is used on the server of RoboHelp for reactive HTML5

  I use Adobe 2015 to publish Responsive HTML5 in RoboHelp Server 10.

  When I publish the project, it seems to name the file, the name of the project. So, if my project is named Cool_Blue, he the published under Cool_Blue. Is anyway to change this name? I know that WebHelp Pro you can set the name differently. I've looked everywhere and can't find how to do, so any help would be appreciated.

  Thank you

  Nita

  Nita, I think what you're trying to do is change the name of the project in a shorter file name while in general, you will have the shortest paths. If this is the case, you must simply renaming the project, then delete leftovers from the project a longer name on RoboHelp Server and you are home free.

  So, if you want to change the name of the project (rather than the name in the 'bar' of the browser, you must change the project name by going to > file > rename project)

  This alert appears:

  

  This s a warning reminder that to publish a project renamed on RoboHelp Server, you should remove the other oldest and republish the newly appointed project.

  So looking at your screenshot posted previously, the CIE would be to use sensitive available, but it could appear as

  Name: CIE Type: Responsive HTML5 Date of publication: etc. You should not "WebHelp" version if I understand what you're trying to do.

  

  Please ignore all the following stuff if the question is already answered

  I add the following text because there was some confusion because of new workflow in RoboHelp 2015 and the new RoboHelp Server 10.

  With regard to the "naming" confusion I'll try to decompress it. There has been some changes in the publication of things since the release of RoboHelp (2015) and, now, RoboHelp Server 10. For example:

  1. What we once called "Single Source Layouts' (SSL), we now call for 'outputs (SSL).
  2. It used to be that if you have been published on a Server of RoboHelp, it was mandatory to use an exit called WebHelp Pro.
  3. WebHelp Pro is still alive and well and can be used to publish in RoboHelp Server 10.
     EXCEPT when you want to publish sensitive HTML5 content to the new RoboHelp Server 10.
  4. In this case, if you post the more modern layout Responsive HTML5 option, it is appropriate to use a sensitive of HTML5 (SSL) output and select a HTML5 compatible screen available in the Pod to set up output.

  Here is an example of the Responsive HTML5 dialog box:

  

  Looking at file names more far, here are a few file names and how they are used:

  

  The. WP is the control file XML that contains specific information about the required information by the RoboHelp Server 10

  The xpj is the name of the project. It is what appears at the top of the editor of RoboHelp:

  

  Nita, let us know precisely what you are trying to accomplish and we will take another crack at it.

  Thank you

  John

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• Have 11 items. Do not burn the videos HD on DVD in HD looks blurry. Help

  Have 11 items. Do not burn the videos HD on DVD in HD looks blurry. Help

  laboratory TIMC

  Thank you for the important troubleshooting information.

  You put too much on a single disc DVD spec'd to 4.7 GB / 120 minutes and compromise the quality of the final product NTSC DVD-VIDEO on a DVD disc widescreen by doing this. You should work with a not too much lower than the max 8.00 Mbps throughput. If you want to try to get everything on a single DVD disk and your Player supports DVD disc double layer, then use a DVD disc double layer in burn it to disc. The DVD double layer is spec'd to 8.5 GB / 240 minutes. That might work for you.

  Your chances for a better quality product are significantly increased by

  1. divide the project on two discs DVD-R 4.7 GB / 120 minutes

  or

  2 put the project on a DVD-R disc 8.5 GB / 240 minutes.

  If you try the project two discs DVD-R 4.7 GB / 120 minutes, consider the following scenario. Take your project current 2 hours and 9 minutes and make a copy of it (first elements Editor File Menu/save a copy). Then the copy to change the contents of the 1/2 and burn the rest with a menu appropriate to disk. With the other copy, modify the content of 1/2 and burn the rest with a menu on the disc.

  But I suspect that the of DVD double-layer disc should be your answer if your Player supports. Most should.

  If please consider and let me know if you see problems in the proposed plan.

  Thank you.

  RTA

• Why are displayed in preview mode, but not to publish the text slide Quiz results?

  The last slide in the project is the standard Quiz results slide. I would like to add a message at the bottom of the slide that says: "Congratulations!" You have completed this training! "When I inserted a text caption with the message, it appeared in mode, overview; However, it does not appear when I published the project. So I tried to insert as a smartshape with added text, but he got the same result.

  Any thoughts on what I am doing wrong?

  Note also that the Question slides have a suspension point. You must make sure that the object appears before the point of interruption.

  See you soon... Rick