Push a message from an application in a designated provider - impossible?
Long story short, I am building an alarm. When the alarm, if she is not reset in soon, I want to be able to send a message (BBM would be preferable, second text better, and so on down the line) for a specific person/contact that is defined in the preferences of the user. It is a message (like a bit of a fail safe) to a single contact per person, which must be in the user's contacts list. I am willing to warn the user that he may incur data charges and so on and so forth.
Is it possible either directly from the app, or indirectly through some other mechanize?
Thanks for your thoughts.
See you soon.
Twitter it out then. Thank you very much.
Tags: BlackBerry Developers
Similar Questions
-
Hi, expert,
I've implemented the ApplicationMessageFolder to add the message to the application in the device message box. We also set the indicator on the notification bar. To OS 5.0, we could not click the notification bar to see a summary of the message. 6.0, we could do it, but although our application put new notification on the notification bar, it will not be shown on the summary message by clicking on the notification bar.
From this link: http://supportforums.blackberry.com/t5/Java-Development/Application-Indicators-and-Home-Screen-Integ..., it says:
========================
Applications that add custom messages can specify if they are displayed in the summary of the notification. This is done using the ApplicationFolderIntegrationConfig, which was added in BlackBerry Device Software version 6.0, as shown in the code example below, which is an extension of the previous example.
===========================
However, our application is built with Java SDK 5.0 as our minimal operating system is 5.0. That does not mean that there is no way that we could do? Thank you very much in advance for any idea about it.
You can use preprocessing, but it should be a separate os 6 version, then.
-
Configuration to disable the new presentation of the Message from the Application
Hello
Every time I have send a message thread, the same instance gets resubmitted with on the creation of a duplicate instance unless the transaction is successful.
But wheb I send any message of app, the new format creates a new instance all the time even if the tranaction fails in the next attempt.
We want to avoid the scenario of the latter. Is there any configuration setting through which we can turn off the resubmisson of the request message or to avoid the repetition of the application submitted again failure messages.
Thank you
Prates T.Naveen,
It works as expected. If you always returns a message app/wire a new instance will be created with the same message (B2B message id or message protocol id) id. In case of resubmission of message app (outgoing) new message will be created with the same message of B2B and in case of wire message id new presentation (inbound) new message will be created with the same id of message protocol.
In case of submission of message from the outgoing wire news, no new entry will be created, and similarly in the case of new entrants app message submission, no new entry will be created.
Kind regards
Anuj -
Messages from Mac on mac and iPhone?
Can mac app messages we send messages on that and also get messages that you send to people on the messages from your iPhone? As if I send messages of the application I can only see messages from the application and not on iPhone? I would messages on the messages from mac and want to be able to see the messages of the iPhone. Please give me teaching helps
Messages - Difficulty of synchronization between Mac and IOS
Messages - Difficulty of synchronization between Mac and IOS (2)
-
How to receive SMS messages in the application of black berries
Hi all, I hope that you'll be fine. I want to send and receive sms messages from my application. But I want that when sms come so instead of going to the Inbox, it is inside my application. Please tell me how I can do this. Java ME I did it, but now I want to do it in black berries. In Java ME, you set a listener for incoming sms to your main MIDlet class. In black berries in what class I supposed to give listener for incoming sms. Help, please. Thank you.
check the dese nets
-
How to upgrade from DOS applications end after the message transport successful
Hi all
We currently have a composite SOA that reads failed (Msg type 3) messages from the queue JMS B2B messages and updates to our business of b2b chess tables. However we do not know how to manage successful transport messages B2B scenarios.
How to back end applications (composite SOA) know b2b messages are processed successfully by B2B? How we capture scenarios of this success? We do not have active ack.
Thank you
KatharHowever is there any mechanism push of b2b for this scenario.
Option #1-
B2B pushes the details of messages to BAM AQ (B2B_BAM_QUEUE in the SOAINFRA schema) where the BAM takes over the details and post in its data objects. If you use not BAM then you can receive messages from this QA. It is once again a batch and it is controlled by below two parameters:
Enable BAM
BAM polling intervalhttp://docs.Oracle.com/CD/E23943_01/user.1111/e10229/bb_config.htm#CEGEADFJ
Option n ° 2-
Write your own DB job that pulls the view B2B_INSTANCEMESSAGE details and pushes for you at the desired location.
Only batch is suitable for this scenario because B2B uses a different set of interim during the processing of message while you are only interested in a terminal State (MSG_COMPLETE)
Kind regards
Anuj -
iPhone cuts read the mail when you open the mail application and pushing new messages
Everytime I open the mail application on my iPhone 6 (9.2.1) all my mail previously reading disappears as soon as it pushes new messages.
I found no adjustment that deals already read the mail on my iphone.
Any ideas? And no it's not because I'm opening mail on the server's desktop in outlook that I rarely use more except as archive. I usually open mail on my iPhone first.
Please confirm that you are in the mailbox of all mailboxes and not the mailbox unread. To do this, up on the back of boxes button at the letters on the top.
-
Original title: initialize 0xc0000135
When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?
Walter Rodriguez
E-mail address is removed from the privacy *.
10/07/12
14:57
Hello
1. do you receive this after you see Start button or entry?
2 have you made any changes to the computer before the show?
Method 1: Boot errors are fixed by the clean boot.
Perform the clean boot and see if that helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.
Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.
I suggest you make a system full scan just to be sure.
Here is a link that will give you information on how to perform a full scan of the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
, Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
PC is Windows XP. The server is Windows 2000. I have administrative rights on both machines.
On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages
Hi carmol,.
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.
Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?
Please check if this helps https://helpx.adobe.com/creative-suite/kb/error-instance-updater-running-cs5.html
Concerning
Stéphane
-
Message says: do not launch the application from the Application package
When I pulled any items in my folder of applications today, the screen came up with three options, organizer, Publisher of Photo and Video Editor. I just wanted to edit a file, but whenever I tried to click on items, I got an error message saying "Please do not run this application from this application package. In contrast, please launch Adobe Photoshop elements 13 & Adobe Premiere elements 13 in your Applications folder. "That's exactly how I started the program, so it doesn't make much sense. What I'm missing here?
Thanks in advance,
David Brown
You use the version of the App Store? There has been recent technical problems with Apple, with the only version of the editor. Go to this link:
-
Message: Please do not run this application from this application package. On the contrary, please put in... from your applications folder. Trying to find applications said, they do not seem to exist.
Program worked well... me if because of the update on the App store?
There has been recent technical problems with Apple, with the only version of the editor. Go to this link:
-
I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional).
Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a version of OpenSSL that has several vulnerabilities for users. Please migrate your app (s) to a new version of OpenSSL within 60 days of this notification. From 07/07/15, game Google will block the release of new applications and updates that use versions older, not supported by OpenSSL (see below for more details). »
I've updated the Android App using function Web app Designer, but they keep sending me this message. I don't understand what I have to do.
Hi Sheila,
If you connect to your Google game account, it will show you who sent you the warning to the apps. The generator on the web app produces Android apps which are not affected by this vulnerability.
Neil
-
IM creative cloud membership payment (one year), the first month I had no problem, but a few days ago I received a message from the Manager of adobe applications saying that the address I have penetration is not correct, but on my Bill all its fine, is at the same address I have income in the first pay period of this one.
Can you help me?.
Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html
-
Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.
Can I get these downloaded components that my optical drive is broken.
Maybe you are looking for
-
50G and problem with integrals, new user.
Hello! I am a student in electrical engineering and I bought a 50G as my first graphing calculator, since that's what most teachers recommend here. I have colleagues who use the same who also make things a little easier, but I have almost no experien
-
Upgrade to 16 Gb (from the beginning 11 MacBookPro i5)
16Gb DDR3 13333 has been installed on MacBookPro (C17FCG1CDH2G series) by friends. They pleased. I want to do it too. What kind of problems can apear? Thank you.
-
How can I change the date and time on my HP officejet pro
How can I change the date and time on my HP Officejet pro?
-
How to uninstall the update of windows KB968211 you?
Have Windows 7 Ultimate N. downloaded KB968211 to install the media components, but when I click on Media Player, the message "Windows Media Player is not installed correctly and must be reinstalled." I tried to reinstall and the message says it is
-
RUNNING WINDOWS XPUSING MICROSOFT OUTLOOK