Put values na imagem

Similar Questions

• PagescopeFlow/session scope putting value in class AppModuleImpl

  Hello
  
  I have a method in the AppModuleImpl class, which returns a String.How is what we'll put this value in pageflowscope/sessionscope...? If it is not possible, how can I get this value in a bean (which is linked to the JSF page)...?
  Pls suggest a solution.
  
  Kind regards.

  Hello.

  Here you can download a sample that I created with two solutions: https://dl.dropbox.com/u/46128268/OTN-Samples/OTNAppModuleClientMethodSample.rar
  (11.1.1.6 JDeveloper and Oracle XE with HR schema is required to run).

  Step by step, the two solutions.

  By program:
  -In AppModule, tab Java, create an AppModuleImpl.class
  -Develop your method in AppModuleImpl.cass
  -In AppModule, Java tab, add your method in the Client Interface. You will find is that an AppModuleClient and AppModule Java classes are created.
  -Update your data to view DataControls on the left controls in your JDeveloper. DataControl, you will see your method.
  -Now go to JSPX page. In it, then click 'go to definition of the page.
  -Links, click on '+' to create a new connection. In the list, select methodAction.
  -In the wizard, select your AppModule then selectable operation by your method. Click ok.
  -You will see in your created liaison methodAction.
  -Now you need to create your Backing Bean code to call this method. You can use the following code:

  OperationBinding op = ADFUtils.findOperation("opName"); // Get op from bindings
  op.getParamsMap().put("key","value"); // Set input params values
  op.execute(); // Execute operation
  op.getErrors(); // Get errors
  op.getResult(); // Get result of your method
  

  In the example, run programmatically.jspx.
  You will see a button that runs a Java Code in a Backing Bean. PageDef, nearby to methodAction link created.

  Declarative:
  -Create your method following the same steps of AppModule.
  -In your data to the left of your JDeveloper controls list, you will see your exposed method.
  -Open your Page JSPX and glide & your method in as the ADF button.
  -A Wizard (such as bind) is displayed. At the bottom of this wizard, you will see your params of entry for the mapping. Please put your values or Expressions EL there.
  -When you have finished this wizard, you will see a button that executes your method.
  -To see the result, go again to the data control, expand your method and drag % drop the return value on your page (return value have a blue arrow).
  -Put a partial trigger in the return value pointing to the button to refresh results.

  In the example, run declarative.jspx.
  In this page, you will see that a CommandButton generated by & slipped the method and an outputFormatted generated by sliding applicant & the output data control parameter.

  I hope this help you.

  Kind regards.

  Daniel.

• How to put two different Recordset values?

  I created a set of messages and a recordset of comments

  the comments table has a post_id to link the comment to a specific post by definition equal to the id field in the messages table

  so that every time a work center the comment that a post_id is equal to the id of the post should load

  I know that if a Recordset advanced combining both tables is created, I can put values she eqal where clause but doing so causes an error in the url of the page settings.

  Please help guys and thanks in advance.

  All this in the advanced Recordset

  SELECT *.

  MESSAGES JOIN comment

  ON posts.post_id = comment.post_id

  WHERE posts.post_id = colname

  Add 1 variable

  name: column name

  type: digital

  default value:-1

  running value: $_GET ['pid']

  in the browser URL, it will be post_view.php? pid = 1

• How to place numerical values on the peak in graphs

  Hello

  Is it possible to put the numerical value on the crest of the wave as in the below image where the yellow dots on the Ridge, we put value digital pic?

  

  It needs a lot of cleanup (and there are probably still have a better way in general), but it should at least help you get started.

  

  I used the Detector.vi Peak, which requires the LV Full Development System.

• How to keep the input value after click on the back button being the ADF

  Hi expert,

  I have a case currently the adf:

  1. I put 'value' in the Label 1

  2. I click on the next button

  3. I click on the "back" button

  4. the 'value' went from 1 label.

  

  How to keep the 'value' of 1 tag after I click back, do you have any suggestions?

  Kind regards

  Ricky

  Hello

  Where you store the value? Try to store it in a variable pageFlowScope or a property of the pageFlowScope bean.

  value = "#{pageFlowScope.testVar} '"

  value = "#{pageFlowScope.testBean.testVar} '"

  Kind regards

  Ruben.

• Insert textbox values in CAD database

  Hello

  I am a newbie to adf.

  My database table is to have 10 columns.

  for Column1, Column2, and Column3 I need user input in the text box (from the UI)

  for column4 to column10 I must hard cord (for example: column 5 is the current date) values of.

  Finally submit all values must be inserted in the database of the click of a button.

  I am doing through managed bean. But I have all the appropriate reference.

  Is there another way to do it?

  Can you please help me with a few reference sites?

  
  

  I thank you kindly for your help.

  Kind regards

  nan18
  

  Why you insist to use beans?

  If you need to hardcode some values, then you can set EntityObject itself

  check - Blog of Ashish Awasthi (Jdev/ADF): set default values in the object of the entity for each CreateInsert

  Immerse yourself in Oracle: by default, the View ranks attributes object

  When you drop viewObject directly on the page so you don't need to use beans, simply call createInsert operation then put values into the fields and call commit

  Framework will do the rest for you

  Ashish

• How to get the values of the table of the ADF to bean class?

  Hi all

  My 11.1.1.6 Jdev

  Here I do not use BC ADF in my project.  I'll put values in the ADF table with bean.

  In the table, I put a checkbox. When I selected (Checkbox) a few rows in table and submit. In the submit method, I want to get all the values of line checkbox selected in my bean class.

  How can I get the values. ???

  Here my table UI code

  < af:table var = "row" rowBandingInterval = "0" id = "t1" value = "#{pageFlowScope.BinderSolutionsBean.uiBinderProperties} '"

  styleClass = "AFStretchWidth" emptyText = "no record found".

  Binding = "#{pageFlowScope.BinderSolutionsBean.binderTree}" >

  < af:column sortable = "false" headerText = "Script ID" id = 'c4' >

  < af:panelGroupLayout id = "pgl4" >

  < af:selectBooleanCheckbox id = 'sbc1' > < / af:selectBooleanCheckbox >

  < af:spacer width = "5" / >

  < af:outputText value = "#{row.scenarioId}" id = "ot5" / > "

  < / af:panelGroupLayout >

  < / af:column >

  < af:column sortable = "false" headerText = "Quote ID" id = "c1" >

  < af:outputText value = "#{row.quoteId}" id = "ot4" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "NASP ID" id = "c2" >

  < af:outputText value = "#{row.naspId}" id = "ot2" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "GCH ID" id = 'c3' >

  < af:outputText value = "#{row.gchId}" id = "ot3" / > "

  < / af:column >

  < af:column id = "c6" headerText = "Term" >

  < af:outputText value = "#{row.term}" id = "ot9" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "Status" id = "c5" >

  < af:outputText value = "#{row.status}" id = "ot6" / > "

  < / af:column >

  < / af:table >

  follow some above recommendation such as the creation of additional attribute. You will also need the key in your collection, while making the data for your chart.

  You must write a custom selectionListener. On valueChangeEvent of box, get the key of a line and add the line at the bean.

  Maybe it's little help for you

  https://tompeez.WordPress.com/2012/01/22/jdev-custom-SelectionListener-for-viewobjects-in-rangepaging-mode/

  How to get the selected row in a table no-bind ADF

• Need help | How to clear the filter of af values: table on table linen

  Hello

  JDeveloper version 11.1.1.7

  I have af:table inside a taskflow to which has been added to several pages as a region.

  The problem I'm facing is if I enter any value in current input for the data in the column filtering and if I navigate to another page that has even added taskflow as a region filter values is still visible.

  How can I clear the values entered in the input of the filter text.

  code fragment:

  < af:table value = "#{bindings." BulletinDataVO21.collectionModel}.

  Binding = "#{pageFlowScope.bulletinArchieveBean.bulletinTable} '"

  var = "row".

  lines = ' #{bindings. " BulletinDataVO21.rangeSize}.

  emptyText = "#{bindings." BulletinDataVO21.viewable? "{customtaskflowsBundle ['table.no.data.to.display']: customtaskflowsBundle ['table.access.denied']}."

  fetchSize = "#{bindings." BulletinDataVO21.rangeSize}.

  filterModel = "#{bindings." BulletinDataVO21Query.queryDescriptor}.

  queryListener = "#{pageFlowScope.bulletinArchieveBean.onQuery} '"

  filterVisible = "true" varStatus = "vs."

  rowBandingInterval = "0" id = "t1".

  styleClass = "datatable_inside_wrapper."

  autoHeightRows = "25" width = "700" >

  the queryListener at the bean code:

  {} public void onQuery (QueryEvent queryEvent)

  QPF FilterableQueryDescriptor =

  (FilterableQueryDescriptor) queryEvent.getDescriptor ();

  Map map < String, Object > = fqd.getFilterCriteria ();

  If (log.isDebugEnabled ()) {}

  {for (String key: {map.keySet ())}

  log. Debug ("touch of filter criteria:" + key + ", value:" +)

  Map.get('zoom') (Key));

  }

  }

  final String publishingFromKey = "Publishingfromdate";

  final String publishingToKey = "Publishingtodate";

  Object publishingFrom = map.get('zoom') (publishingFromKey);

  Object publicationdans = map.get('zoom') (publishingToKey);

  String titleValue = (String) map.get('zoom') ("Value");

  If (StringUtils.isNotEmpty (titleValue)) {}

  Map.put ("Value", "%" + titleValue + '%');

  }

  String targetDepts = (String) map.get('zoom') ("Targetdepts");

  If (StringUtils.isNotEmpty (targetDepts)) {}

  Map.put ("Targetdepts", '%' + targetDepts + '%');

  }

  Category String = (String) map.get('zoom') ("Category");

  If (StringUtils.isNotEmpty (category)) {}

  Map.put ("Category", "%" + category + '%');

  }

  DCBindingContainer links =

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  OperationBinding = setPublishingFromDateStartOperationBinding

  bindings.getOperationBinding ("setPublishingFromDateStart");

  OperationBinding = setPublishingToDateEndOperationBinding

  bindings.getOperationBinding ("setPublishingToDateEnd");

  setPublishingFromDateStartOperationBinding.getParamsMap () .put ("value",

  publishingFrom);

  setPublishingToDateEndOperationBinding.getParamsMap () .put ("value",

  Publicationdans);

  Map.Remove (publishingFromKey);

  Map.Remove (publishingToKey);

  setPublishingFromDateStartOperationBinding.execute ();

  setPublishingToDateEndOperationBinding.execute ();

  DcIteratorBinding = DCIteratorBinding

  bindings.findIteratorBinding ("BulletinDataVO2Iterator");

  ViewObjectImpl = bulletinVO

  (ViewObjectImpl) dcIteratorBinding.getViewObject ();

  final String publishingFromCriteria = "QueryByPublishingFromDate";

  final String publishingToCriteria = "QueryByPublishingToDate";

  If (publishingFrom! = null) {}

  bulletinVO.setApplyViewCriteriaName (publishingFromCriteria, true);

  } else {}

  bulletinVO.removeApplyViewCriteriaName (publishingFromCriteria);

  }

  If (publicationdans! = null) {}

  bulletinVO.setApplyViewCriteriaName (publishingToCriteria, true);

  } else {}

  bulletinVO.removeApplyViewCriteriaName (publishingToCriteria);

  }

  JSFUtils.invokeMethodExpression ("#{bindings.") BulletinDataVO21Query.processQuery} «»

  Object.Class, QueryEvent.class,

  queryEvent);

  Map.put ("Value", titleValue);

  Map.put ("Targetdepts", targetDepts);

  Map.put ("Category", category);

  Map.put (publishingFromKey, publishingFrom);

  Map.put (publishingToKey, publicationdans);

  }

  Please let me know we can clear the values entered in input boxes of text for filtering on whenever the load table.

  Thank you

  Madhukar

  Hi all

  I could solve the problem.

  Clear the fault and implicit criteria VO display!

  Here's the code to do the same.

  Hope it will be useful for others as well, also let me know if this can be done in the best way.

  Bean code:

  DCBindingContainer links =

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding data binding =.

  bindings.findIteratorBinding ("TestDataView1Iterator");

  If (dataBinding! = null) {}

  ViewObjectImpl = testDataVO

  (ViewObjectImpl) dataBinding.getViewObject ();

  testDataVO.reset ();

  The below two lines code clears the default and display implicit criteris

  which gets set in ViewCriteriaManager when we filter the data in the table to help

  This table filter text box in the column af:table headings

  NOTE: It will not erase the other criteria of which are defined by users in VO

  testDataVO.getViewCriteriaManager () .removeViewCriteria (ViewCriteriaManager.DFLT_VIEW_CRITERIA_NAME);

  testDataVO.getViewCriteriaManager () .removeViewCriteria (ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);

  If (param.equalsIgnoreCase ("home")) {}

  testDataVO.setWhereClause ("attachment = 'Y'");

  } else {}

  testDataVO.setWhereClause ("attachment = ' n '");

  }

  testDataVO.executeQuery ();

  }

  Thank you all for the suggestions.

  Thank you

  Madhukar

• With Captivate CS6, I can't change the value of the variable personalized with AS3

  Hi all

  I did a program in AS3 flash to get the values to an XML file and put values in the custom variable to Captivate. While I was with captivate 5.

  I used something like that;

  var movie_captivate = this.parent.parent.getChildAt (0);

  movie_captivate ['customvariable1'] = 'test ';

  I've never had a problem.

  Since 2 weeks I use Captivate Cs6, I test my program and it does not work.

  I checked with a debug flash with my swf with captivate 5, I see my custom variable and its value and a witch of SuspendVarsArr table contains the name of the custom variable.

  But with with captivate swf 6, I see only a witch of SuspendVarsArr table contains the name of the custom variable but I don't see variable custom name and value.

  Can someone tell me where the captivate CS6, it is not possible to read and write a custom variable of captivate. Or if it is possible, what can I do to make it work.

  Thank you for your help

  Xavier

  Try to access that manage variables like this:

  captivateVariables = Object(parent.parent).getMovieProps().variablesHandle;
  

  Looks like you need to convert the display for an object objects container before you can access the call of getMovieProps()...

  You can download the .fla and .swf animation that I used for the test: http://captivatedev.com/demo/Cp6/SlideNumberAnimation.zip

  Jim Leichliter

• Value of control not seen in getURL

  I use the following command to send parameters to a cfc with flash remoting.
  
  myService.deleteDelivery (' #APPLICATION.dsn # ", id.text,'deleter # #',' #APPLICATION.dsn2 #', reason.text, extDelNo.text, unit_no.text, product_code.text, shipped_da te.text");
  
  ID, reason, extDelNo, unit_no, product_code, and shipped_date are flash text boxes. When I call the remote access I get the error "IntID, a required parameter was not passed in. This corresponds to the value of id.text. If I encode a number, and then he went. The same thing with other text controls. I thought I could use the control's text and property passing.
  
  I announced the control names to place then to _root.
  
  var reason = reason;
  var id = id;
  etc...
  
  I know they have value because I can see them.
  
  How can I retrieve the values of these controls and pass them in the getURL function call? Thank you.
  
  

  Sojovi,

  I found the problem. The controls that I was trying to use to their text value were of the type "hidden". Apparently, the 'hidden' control has no such property. I could not find how to get a hidden control value. I ended up putting values into a TextBox and hiding. The .text property was then very well.
  Once again, thank you for the help. It made me think.

  Mark

• Complete the table of reference

  Hello

  What I want: complete a table that is inside a container and named function of input parameters.

  What I tried:

  I created an object reference, Locals.obj_temp, which stores the set I want to fill the inside of the container.  I seem to be able to get the number of items, define the limits of the table, insert items, etc., but I can't figure out how to put values in there actually.

  I learned today that I can use ' * ' for dereferencing the ref of the object, so I use

  InsertElements(*Locals.obj_temp,"[0]",1),
  
  

  to add an item correctly.

  But, I don't know how to make the value I want it to be, and not not not the default value zero as shown in the picture.

  for what it's worth, this is how I make the new table inside the container and obtain a reference to it.

  Parameters.UniqueFCs.NewSubProperty(Parameters.UniqueFullTable[0][Locals.m],PropValType_Number,True,"",0),
  
  Locals.obj_temp = Parameters.UniqueFCs.GetPropertyObject(Parameters.UniqueFullTable[0][Locals.m],0),
  
  

  

  I found a way to do it.

  I created a temporary table as Locals.Arr1 and clone to the container parameter I want.

  For all of you who found this thread, I have

  Locals.Arr1 //my table temp I empty at each iteration of my loop for external
  
  
  /*
  code that fills Arr1
  */
  
  Locals.obj_clone = Locals.Clone("Arr1",0),  //create a clone of obj of Arr1
  
  Parameters.UniqueFCs.SetPropertyObject (Locals.name_temp, 1, Locals.obj_clone), //copy Arr1 table in my output tray (my container is called UniqueFCs)

• arrays in loops for

  Hello

  I'm putting values in a table using the loop. My requirement is to insert the value in the output table only if I mod 2 equals zero. Otherwise, I don't want to move something to the table. The problem arises because I can't leave the tunnel of continuous wire output in the condition of "False" to the structure of the case. So I tried a constant value of 0 of wiring. Now my table of results has also zeros. How can I change this VI to make me a table like 0 2 4 6 etc.?

  Thanks in advance

  annakurian wrote:

  Otherwise, I don't want anything to be passed at the table. Kindly help

  I have already mentioned the conditional tunnels. See here for more details. See how far you get.

• Custom Manager does not display anything

  I encounter the same problem that has been described in this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/implement-own-custom-manager/TD-p/233568

  The thread was to make a ScrollChangeListener. Is a necessary ScrollChangeListener in the extension Manager? The API documentation makes no mention of this requirement.

  Thank you

  I think that I finally understand it.

  When you use drawText, I put values non-null in the coordinates of the anchor. I thought that I had to move the anchor point for each field that I drew in the Manager. It turns out that Manager takes care to position the region of drawing of field, so I didn't need to move the anchor point.

  I assumed that when I moved the anchor, he moved the drawing actually so that he was no longer in the clipping region. It is in any case I guess.

• AAA accounting records to the RADIUS server

  Im trying to activate recods orders accounting to be send to my server ACS on all my devices, I activated this orders accounting for each level of privilege to follow who types what on my devices, now the problem is that the files are not displayed on my ACS accouting reports, I get everything except the records for the typed commands , any suggestions on what order the put value on my devices to enable this feature... ?

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=AAA&TopicId=.ee6e1fe&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbfe9b8

  The head about it. It points you to a patch for a 4.1 Setup that I assume that you are using.

  See you soon

• Type of migration and data Hyperion Planning classic Application

  Hyperion 11.1.2.4

  Windows 2012

  SQL Server 2012

  I'm migrating my classic application of 11.1.2.3 to 11.1.2.4 and trying to manually create the shell application in the destination. What I notice is

  In 11.1.2.4 on manage plan type screen request I am unable to uncheck the checkbox ASO. I have to put values in two areas of text next to the checkbox ASO. We don't have to ASO is enabled in 11.1.2.3. I wonder

  Should I let check and what value should I put in the text boxes

  What would be the impact if I keep the ASO box checked for migration. It is unchecked in 11.1.2.3

  Can someone advise

  The application that you create is a PSPB module and not in a standard module that you did not mention and allowed ASO by default - Types of Plan