QoS LAN - how to say switchport reassign CoS value to mixt?
Hi all
There is an order issued on the switchport which tells a Cisco IP Phone trust the CoS of a station connected to the access of the phone port said, but to change the tag to a CoS value of your choice. Example:
MSL qos trust cos
switchport priority extend cos 3
I have, however, is a resort with important data traffic only able to send traffic on CoS 0 and no voice/phone.
So I want to load the switchport to assign a CoS value of 3 for traffic from the stand-alone PC station.
Y at - it an IOS command that makes this possible without going through a Cisco IP Phone between the port and the PC Station?
Hi Dean,
Specifically, if the mls qos cos 3 command is ineffective for IP packets and the port is configured to trust dscp, then how would an administrator set the desired DSCP priority level for those packets he/she wants?
What you're asking here contradicts itself. Trust the DSCP means "the DSCP value is good and requires no rewriting"-why would you want to override the DSCP value, then?
Note that even for the mls qos trust cos, the mls qos cos command applies only to those executives who no CoS present on the ground because the 802. 1 q VLAN tag is missing. If the frame has a CoS field, the mls qos cos command does not apply. With qos trust dscp mls, a similar mls qos dscp command makes no sense: each IP packet has a DSCP field in its header, and non - IP packets have no DSCP whatsoever.
However, there is a way to actually classify and possibly rewrite the DSCP values in a more precise way by using the class- and policy-cards used in the command of the service-policy interface. This command can be used instead of mls qos trust command and perform more thorough, more elaborate classify and re-writing of DSCP value. See:
Best regards
Peter
Tags: Cisco Network
Similar Questions
-
Original title: windows xp.
reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?
Hello
Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.
Get graphics, sound while you're there.
You should always do a reinstallation.
Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.
See you soon.
-
I use a custom scale and the DAQ assistant to acquire data from a USB DAQ device. How can I display voltage gross values at the same time?
Thank you
David
Do not use the ladder custom, but read the raw data using the daq assistant and adapts the data later. Or the scale of the data using the inverse of the custom scale.
-
How to recover frm the checkbox value
Hello
How to recover frm the checkbox value
can someone help me on this topic
Thank you
Sujith
CheckboxField class
Boolean getChecked()
-
How to change the number of values in the hour that are restricted.
Hello
May I know how to change the number of values in the hour that are restricted.
In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.
Please suggest me! Its urgent!
Thanks and greetings
Navnitha
Hello
In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below
In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report
Thank you
RAM
-
How can I set the default value of a selection in the Query Panel with table.
Hi Experts,
JDev 12.1.3.0.0
I have a view Criteria (contains a attribute with LOV). and the named criteria is dragged as a query with Table Panel.
In the user interface, the LOV is now visible in the query Panel. Suppose that the LOV has 3 values: 'Manual', 'Other' and 'portfolio '.
How can I set a default value for the choice of a select. ?
Thank you
Roy
refer to:
Andrejus Baranovskis Blog: Dynamic value by default for the field in query ADF search
but rather to express as in the bellows of the image, choose literal and let 2
-
Hallo,
I've created a workflow bounded (containing JSPX pages) that I use as dialog box.
There a lot of return values...
I would like to how to go and read all values ret in the workflow limited appeal because the return value of dialogue seems to not allow a value...
Thank you
Federico
You can try with returnListener, then to returnEvent.getReturnParameters ( https://myfaces.apache.org/trinidad/trinidad-api/apidocs/org/apache/myfaces/trinidad/event/ReturnEvent.html#getReturnParameters%28%29 )
Dario
-
How can I retrieve all the values in a single query in the oracle XML
Hi all
I have xml format below, how do I retrieve all the values in a single query.
< files >
< job > MANAGER < / job >
< details >
< ename > JONES < / ename >
< sal > 2975 < / sal >
< ename > BLAKE < / ename >
< sal > 2850 < / sal >
< ename > CLARK < / ename >
< sal > 2450 < / sal >
< / details >
< / documents >
Thank you
I prefer desgin a little more sophisticated xml and wrap the details in a separate label.
Then you could something like that
1 with testdata until)
2. Select xmltype)
3'
4MANAGER
5
6
7JONES
82975
9
10
11BLAKE
122850
13
14
15CLARK
162450
17
18
19
20 ') in the form x
21 double
22)
23 select
24 j.job
25, d.ename
26, d.sal
27 of testdata
28 join
29 xmltable ("Scriptures" in passing testdata.x)
30 columns
31 job varchar2 (30) path "job."
32, details xmltype path «details»
(33) j
34 (1 = 1)
left outer join 35
36 xmltable (' details/emp' in passing j.details)
37 columns
path of varchar2 (30) 38 'ename' ename
39, path of varchar2 (30) sal "sal".
(40) d
41 * (1 = 1)
>/JOB ENAME SAL
------------------------------ ------------------------------ ----------
JONES MANAGER 2975
BLAKE MANAGER 2850
MANAGER CLARK 2450 -
How do you get the numeric value of an image
How do you get the numeric value of an image
This in a small example
var Red = ' \u00FF\u00D8\u00FF\u00E1\x05oExif\x00\x00MM\ '.
Here is a link to a script open source that generates a string that represents the data of a file binary, especially useful to integrate a small image in a script or file patterns in a JSON structure, for example:
Get the data from binary string
HTH,
Domestic-
-
How to display the database column value in a component of choice selected?
Hello everyone;
I use Jdeveloper 11.1.1.4 and right now I have the .jspx UI page that includes < af:selectonechoice / > components and according to the requirment I have to fill one of the column in the table in this drop-down list.
can someone tell me how to fill the database column value in this drop-down list. I know I need to create the VO for the same thing, but I'm new to this technology. Then please suggest.
Thanks in advance.,
This will help u
https://blogs.Oracle.com/prajkumar/entry/create_lov_in_adf_application
How to create LOV in ADF 11 g | Techartifact
Oracle Fusion Middleware Technologies: 11G: how to create a list of Values (LOV)?
http://www.baigzeeshan.com/2010/03/creating-lov-in-ADF-application.html
http://husaindalal.blogspot.de/2010/05/How-to-default-lov-with-its-first-value.html
-
How to get the maximum/more value in one line?
I have a simple table view Pivot with dollars as a measure, a month on accounts on the rows and columns. I want to emphasize the month that has the greatest value. For example if the market value for the revenue account is for Jan, Feb 11, 50 Mar 10 and 0 for the rest of the month, then so I want to highlight the cell that contains 50 green. So, basically, I need to be able to identify the max value in a row in the PivotTable.
If I add a max calculation, it returns the top value in all columns and rows. A calculation of rank also returns the rankings in all the columns and rows. How can I determine the largest value in a single row?
Thank you
J
In general, go through measures based on level. Just tweak it like max (income per year)
Just do it in the criteria tab and see how it works and I still thing you know how to
-
NOAE: How can I get the real value of FPS?
I implement an external encoder as an After Effects plugin library. This requires a value for the encoding of the FPS as a float value.
With the help of:
ERR (suites. IOOutSuite4()-> AEGP_GetOutSpecFPS (mouthand fps));
gives a completely ridiculous value (1964114, when the FPS publication is 29.97). How can I get the real value of FPS?
Hello
It seems that AEGP_GetOutSpecsFPS returns a value of type A_Fixed. You can use the macro FIX_2_FLOAT() (defined in AE_Macros.h) to convert to a float value.
-
How can I get a percentage value in curves - in CS5, it used to be Cmde would make a point on a point on the curve, to allow for precise adjustment...
Hugh,
Your screenshot shows that you're NOT watching the modeless panel that mentions Christoph Pfaffenbichler.
This screenshot is not of all 'menu', as you call it mistakingly, but of the dialog modal adjustment, not a modeless adjustment panelthat would look like this:
-
How to pass the parameters or values film double hollow?
Hello
I create a game in Flash 8 with 2 AS and I have some questions to ask.
First of all, I'm stuck for 2 days to create a tower Laser beam to the target.
I searched the internet for solutions but I can't really find one, so I'll try display of questions myself...
First I tried to create, and the effectHolder in which each laser beam has been created, because it seems I can create only one line in each movieClip...
_root.duplicateMovie(effectHolder_mc , "effectHolder_" + this, _root.getNextHighestDepth());
v = a = _root["effectHolder_" + this];
ray.onEnterFrame = function()
{
v.clear();
v.lineStyle(1,0xFF0000,100);
v.moveTo(this._x, this._y);
v.lineTo(creep._x , creep._y);
v.text = "True"}
It's triggered eveytime, she was a target.
With each turn that triggered a laser that I created, it became more than offset, so I tried selfdestructing after some time.
this._alpha -= 10;
if (this._alpha <= 0)
{
this.removeMovieClip();
}
But he did not actually work, so I tried another solution. I tried to give each MovieClip ("Laser"), duplicate code that creates the laser beam.
onClipEvent(load)
{
this.fx = from._x;
this.fy = from._y;
this.tx = to._x;
this.ty = to._y;
}
onClipEvent(enterframe)
{
_root.dmg.text = "From: " + fx + "," + fy + " To: " + tx + "," + ty; //I used this on a textbox to see if parameters are transmited. But they were all 'undefined'this.clear();
this.lineStyle(1,0xFF0000,100);
this.moveTo(from._x, from._y);
this.lineTo(to._x , to._y);
this._alpha -= 4;
if (this._alpha <= 0)
{
this.removeMovieClip();
}
}The problem is that I did not know how to pass the coordinates of the tower and the target to the MovieClip so that it knows where to create the line.
X++;
duplicateMovieClip(_root.Laser, "Laser" + X, X,{from._x,from._y,to._x,to._y});
g = _root[_root.Laser + X];
g.fx = from._x;
g.fy = from._y;
g.tx = to._x;
g.ty = to._y;Please leave suggestions on how to send the parameters or values for the created clip, or an idea of the creation of this line ("beam") for each tower, without so much trolling.
Thank you
Chris
What is the trigger of v's _alpha decrease?
-
How to get the RGB color values on the color picker component?
How to get the RGB color values on the color picker component?
trace (cp.selectedColor);
Returns something like:
16750950
trace (key2cp.hexValue);
Returns:
ff9966
I'm looking for RGB, for example, 0.5 0.5 0.5, corresponding to a gray color.
Is there a chance that the RGB settings are hidden somewhere or is there a conversion function at least?
Thank you.
If key2cp.hexValue returns a string like 'abcdef', use:
var s:String = key2cp.hexValue;
var n: Number = Number("0x"+s);
var r: Number = n > 16 & 0xff;
var g:Number = n > 8 & 0xff;
var b:Number = n & 0xff;
Maybe you are looking for
-
audio books deleted still show in iBooks
I deleted my audio book but they always show on the iPod but not on iTunes Did I miss something? software of iPod and iTunes update. Drew
-
My voice goes further in some footages and I don't know why?
Hello! I'm currently editing a vlog and noticed that all the voices sound more manly (deeper) from the middle of the video until the end! Can I have clicked on something by accident, but I don't know how to fix it! Our voice is very good at the begin
-
Can I connect my laptop running XP on my Windows 7 desktop. I need to do so that I can print
-
SanDisk Extreme USB Flash Drive and SMART failure
I just got 3 64 GB SanDisk Extreme USB Flash Drives and all three show SMART failures to reassign bad sectors. I struggle to believe that all three could be bad on first use. I use a program on a Mac (SoftRAID(4)) to certify all drives prior to use,
-
Smartphones blackBerry->; a FUNNY QUESTION <; -.
How could be missed calls log when remember you that you get options such call HOME-OFFICE-MOBILE, number doesn't seem to know number of contact the other party (already added to the address book) was called...! So you call Office first and know that