Question about a default text setting

Similar Questions

• Questions about tables in text boxes

  When I convert the text to a table, there is a small space between the text block and the table. I have two questions about this:

  1. Is it possible to remove this gap? I put the text block options set spacing to 0 and gutter to 0 and spacing of table before and after to 0.
  2. Is it possible to create a table that is not in a block of text, especially when converting text to a table?

  Attached is a few screenshots that I hope will be useful. In the first image, East of the limit of the framework text in magenta and the structure of the table is in light blue. The gap between the blue magenta and light vertical lines on the left, that's what I want to remove.

  

  Tables are always in a text frame, and in fact, they are part of a paragraph, so I would check the assigned to this paragraph paragraph style and see if there is a left indent applied, or perhaps a paragraph alignment is set to something other than the left.

• Question about Tablespace default temporary

  Hi, all.
  
  It is a "Newbie Question"
  
  If I execute the following SQL statement:
  
  SQL > select tablespace_name, content from dba_tablespaces, this is what I get + other tablespaces.
  
  NOM_TABLESPACE... CONTENT
  
  SYSTEM ....................................... PERMANENT
  TEMP .......................................... TEMPORARY
  
  My question is about the TEMP tablespace. What is the default permanent tablespace defined by the system? In OEM grid control, where it is explicitly stated that it was defined by the permanent system default storage space?
  
  How to know for sure if storage space is the temporary tablespace default or not, without run the drop command and get the following message:
  
  SQL > temp DROP TABLESPACE;
  Drop tablespace temp
  *
  ERROR on line 1:
  ORA-12906: cannot remove the temporary tablespace default
  
  
  Thank you!
  
  Published by: ORA_UMAIR on February 18, 2009 10:12
  
  Published by: ORA_UMAIR on February 18, 2009 10:13
  
  Published by: ORA_UMAIR on February 18, 2009 10:13

  Select * from database_properties
  where property_name = 'DEFAULT_TEMP_TABLESPACE ';

  HTH...

• A question about the predefined text typewriter and rates.

  How can I do so that I had to have 2 pieces of text separated into 2 layers different length different, the typewriter effect works at the same rate for each of them? As in, I want to ensure that regardless of the amount of text has a line, she always "type" X-characters-per frame. I know how to set individual speed using key frames (text > host > range selector > opacity), but I want to so he types at the same pace.

  If it helps to visualize it easier, I want to replicate the appearance of a of the classic RPG the text like in this video. No matter is the number of characters in each text box, he always hit the same rhythm of characters (unless you decide to speed it up); the only thing I can control is a general speed in which printed characters, but they never print the same pace, just print at a rate so that all characters in the layer out in x-amount of time.

  Sorry if this is a difficult thing to explain, but someone capable of understanding how this is easier? Or do I just manually adjust each keyframe so that it seems to print out to a uniform speed?

  How can I do so that I had to have 2 pieces of text separated into 2 layers different length different, the typewriter effect works at the same rate for each of them?

  under set advanced the 'Index' units, set keyframes for start in the same place in time. your text will be held by index number of characters and not the percentage of all characters = same speed

  

  I did thousands of transcripts in preset of the typewriter and many years ago, we found that the index is much better than percent for many reasons.

  It is from the help files: text in After Effects animation

  Note:

  You will be perhaps easier to think in terms of number of characters than percentages for the Start and End of a range selector property. To display these properties by number of characters (including spaces), choose Index for units in the advanced properties of a range selector group.

• How to value for the default text setting is all

  Hey all

  I have a requirement they want a parameter on the article number,

  This parameter as text and field as the default value as

  I tried everything but nothing doesn't work, is it possible? If so please guide me what I'm missing or hurt

  Thank you

  Yes, this can be done.

  You must handle this in your SQL code. Here is an example

  Approach 1:

  -----------

  Definition of parameter in your data model: P_ITEM_NUM

  Data type of parameter/type: text/string

  The parameter default value: white

  In the SQL: where ITEM_NUMBER = NVL(:P_ITEM_NUM,ITEM_NUMBER) - ITEM_NUMBER here is your database column

  At runtime, if no value is given for article number parameter - the NVL function will consider the incoming value with null and it will run the report for all values of report item.

  Approach 2:

  -----------

  Everything is the same as 1, except the default approach.

  The default parameter value: all the

  In this case, your SQL must DECODE statement

  Where ITEM_NUMBER = DECODE(:P_ITEM_NUM,'All',ITEM_NUMBER,:P_ITEM_NUM) - it's like an IF statement

• A question about the network card set

  Hi all

  In the vSphere Client, I can not change the type of a network card. But with PowerCLI, in case of power off the power of virtual machines, I can execute the following line:

  get-vm <virtual_machine_name> | get-networkadapter | set-networkadapter -type "vmxnet3"

  Is it correct method to change adapter type? (I need to keep tha MAC address)

  When you change the type of NETWORK card, Windows treats it as a new device.

  You will have to redo all the IP settings on the map 'new '.

  The easiest way is first get IP parameters, with the Get-VMGuestNetworkInterface cmdlet.

  Then change the type of NETWORK adapter and then redefine the IP parameters with the Set-VMGuestNetworkInterface cmdlet.

• FDK9: Question about dialog input text (and coding)

  Hi all

  The other day I met a problem which is driving me a little crazy, so I hope a kind soul help me on track!

  When I get a text input in a dialog box, some character combinations (for example the backslash followed by capital F) prove to be scrambled (or at least, I can't understand what the code is supposed to be). It happens regularly, I call a standard dialog via F_ApiPromptString or use F_ApiGetString on an edit box in a custom dialog box. The following example of (micro) illustrates the problem.

  I must be missing something very basic here. I would be extremely grateful if someone could explain why the entry is UTF-8, or MakerRoman.

  Kind regards

  -Mark

  PS: I am running Windows XP on a Danish locale. Nothing particularly exotic.

  [Console output]

  Encoding dialog box is "FrameRoman".
  String #1: '\F' (hex: 0x5c 0 x 46)
  String #2: "ƒ" (hex: 0xc6 0 x 92)

  [Code of plugin]

  #include < fdetypes.h >
  #include < fapi.h >
  #include < futils.h >

  VoidT F_ApiInitialize (IntT init)
  {
  If (init is FA_Init_First)
  {
  F_FdeInit();
  F_FdeInitFontEncs ((StringT) 'UTF - 8');
  F_ApiEnableUnicode (True);
  F_ObjHandleT mainMenuId = F_ApiGetNamedObject (FV_SessionId, FO_Menu, (StringT) "!) MakerMainMenu");
  F_ObjHandleT testMenuId is F_ApiDefineAndAddMenu (mainMenuId, (StringT) "APIMenu", (StringT) 'Test');.
  F_ApiDefineAndAddCommand (1, testMenuId, (StringT) "TestStringPromptCMD", (StringT) 'Test string guest', NULL);
  }
  }

  VoidT F_ApiCommand (IntT cmd)
  {
  If (cmd == 1)
  {
  StringT s1, s2, encName;
  If the user does not change, the "\xfc\x46" string will be returned.
  F_ApiPromptString (& s1, (StringT) "Press OK", (StringT) "\\F");
  If the user types (or pasta in) \F, the "\xc6\x92" string will be returned.
  F_ApiPromptString (& s2, (StringT) "Type \\F and press OK", (StringT) "");
  encName = F_ApiGetString (0, FV_SessionId, FP_DialogEncodingName);
  F_Printf (NULL, 'dialogue encoding is '%s',' encName);
  F_Printf (NULL, "\nString #1: '%s' (hex: 0 x % 02 x 0 x % 02 x)", s1, s1 [0] s1 [1]);
  F_Printf (NULL, "\nString #2: '%s' (hex: 0 x % 02 x 0 x % 02 x)", s2, s2 [0] s2 [1]);
  }
  }

  Hello Mark,

  the FrameMaker IU transforms certain combinations of characters with the special characters backslash, but not all. They are listed here:

  http://help.Adobe.com/en_US/FrameMaker/9.0/using/WSd817046a44e105e21e63e3d11ab7f7862b-7fd5 .html

  Certain combinations of extra backslash are valid in the search box:

  http://help.Adobe.com/en_US/FrameMaker/9.0/using/WS25F3553F-C76C-4f49-9c16-E251912A7D42.ht ml

  If you want your customers to be able to enter the backslashes in a dialog box, they must enter twice.

  HTH,

  -Michael

• How can I move the CRA over time default text?

  I have placed "Default Text" on a separate video track. In the video, a hand is oriented along an arc for 1.5 seconds.  I want the text to follow the CRA that the hand moves.

  I stumbled on how to do this all by pointing and dragging various things in the framework, then I screwed up the edit and CTRL-Z got myself back to a better point AND I LOST THE ABILITY to do so.

  While it worked, I would see my text in its framework, and the center of the image has a cross.  By positioning the scrubber at the beginning and ending points, there was a line drawn from the cross to the text.  The starting point was a line showing the starting position, the point of arrival had it showing the end position.

  Now, when I try to move the text, I get one of two things (none of them work for my plan):

  (1) I have the window "Settings" open and the pointer tool is used to fix the position of the text in my "Default Text" setting.

  (2) I'm moving the entire frame in the preview window and the cross moves with it.

  I stumble on something and I don't know how I got there.

  Thanks for any help you can give.

  Me: 64-bit Windows 8.1, Adobe Premiere Elements 13

  billsbayou

  Great news. Great job.

  Timeline clip selection, Panel applied effects tab/Applied effects Palette/movement extended to get across (to zoom) and properties of Position (panoramic view).

  That's where I was pointing you in my previous post when I wrote

  But if everything you want to do is to move text along a path in Premiere Elements, which can be done Motion Keyframing scale (to zoom) or

  Position (panoramic view) / probably better using this framing key to the Position property. Have you tried yet?

  There is always another way... creating keyframes for Position at the level of the "elastic" timeline, orange line that scrolls horizontally on a video editing or audio clip. More info on another time if you are interested.

  But, at present, a lot of progress.

  RTA

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• my default text will come out as question marks in a box

  I am on OS x EL Capitan Office. My default text will come out as question marks in a box for each character?

  See this document

  Font (El Capitan) book: restore the standard fonts

  reset

  If that does not solve it close all applications and the terminal type

  sudo atsutil databases - remove

  and reboot

• How to set a heading style and the default text on Quick?

  On Adobe first Essentials 13 video editing, if I use Quick is it possible to set a default style for titles and text? I see instructions on setting up a style by default in Expert, but that doesn't seem to work at the Quick. Thank you.

  aperture14

  Wonderful news of your success with the default text and burn it to disk. Good job sorting through the troubleshooting paths to find

  solutions.

  In general, I burn it to DVD disc with a check mark next to Fit content in the burn dialog box to the available space. The only time I leave this option disabled

  is if I get an error of data rate and I have to manually set the baud rate. When you get to Blu - ray, the situation is a little different.

  http://www.atr935.blogspot.com/2013/05/pe11-Blu-ray-burn-dialog-fit-content-to.html

  Very pleased with your progress.

  Best wishes with your video projects.

  RTA

• How to set the default text for a text entry area dynamically?

  I do a simulation and grabbing a my user text entry.  I store in a variable and you want to use as the default text for a text entry later in the simulation box.  It seems like it would need current for a software simulation.  However, I don't see a way to set the default text.  If I put the variable in a legend, I would use the syntax $$variablename$ $.  I tried to fix this in the text by default, but it did not work.  It is not interpreted as a variable.  Does anyone do this?  Please share.  Thank you.

  I had a need to do that as well... put a variable as default text name in a TBE field.

  

  I have a widget AS3 to do this, which can be found here.  There a Cp 4 demo file that does exactly what you describe.

  I would like to know how it goes...

  Jim Leichliter

• Question about text boxes, and then select options in web sites and text in yahoo.

  Hello

    I am a web developer working on with web sites. I am a regular user of fire fox , previously i sent an issue about search option in fire fox browser,  i am very much happy to see change in the search option in browser recently. Presently i got an issue in browser about select and text box ... i'm not able to view them properly i mean the text is breaking ... sample i opened yahoo browser .. i was shocked to see breakable text .i will attach screen shot if possible. please fix this as soon as possible.
  

  Thank you
  Lady Sarah.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  What the font is used to display this text?
  You can select "Inspect element" in the context menu to open the Inspector (Firefox/tools > Web Developer).
  You can check the font used for the text selected in the tab fonts in the right pane of the Inspector.

• EBS 12.1.3: a few questions about cloning

  Hello
  
  We have EBS 12.1.3 on AIX 7.1.
  
  A few questions about the cloning of level shared environment of application layer non-shared application environment. We followed 'Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]'
  
  Environment (shared application layer) source:
  -Two nodes in the active application and LBS
  -A database of active and a passive database configuration with Oracle Data Guard.
  -Terminate SSL at the load balancer
  -Updated CFP implementation
  
  Environment target (level app not shared):
  -A single node of the application active
  -One data node active
  -Without SSL
  -No PCP
  
  After the cloning was completed, we noticed the following problems in the target system:
  
  (1) home page is not available because application $CONTEXT_FILE layer always contains the endpoint "https" and ssl settings.
  
  Workaround solution:
  
  Change (with text editor) layer Application $CONTEXT_FILE as follows.
  < webentryurlprotocol oa_var = "s_webentryurlprotocol" custom = "yes" > http < / webentryurlprotocol >
  < sslterminator oa_var = "s_enable_sslterminator" > # < / sslterminator >
  < login_page = "s_login_page" custom = 'yes' oa_var > http://myhost.mydomain.com:8000/OA_HTML/AppsLogin < / login_page >
  < externURL oa_var = "s_external_url" custom = "yes" > http://myhost.mydomain.com:8000 < / externURL >
  
  Run the automatic configuration service and application layer.
  
  Is there a better solution and supported for this?
  
  (2) simultaneous managers do not work properly, because they still have old names of node (used in the CFP in the source system). The solution is used:
  
  1. connect to the EBS GUI web and delete all nodes of all concurrent managers.
  2 shutdown application layer. Check that all concurrent managers have been extinguished. If not, kill the process manually
  3. as a user apps run cmclean.sql
  4 restart the application layer
  
  Is there a better solution for this?
  
  (3) database ARCHIVELOG mode nonarchivelog mode changes in the target system. Is anyway to prevent this?
  
  (4) in addition, we would like to make a full clone (app + db levels) of production without closing the application. Is this possible? What would be the best documents to describe it? In Production, we have Oracle Data Guard physical standby installation as per "Note technique Oracle: Business Continuity for Oracle E-Business release 12 Using Oracle 11g Physical Standby Database [1070033.1 ID]. This can be used when executing a clone of warm for the database, right? What application layer? The steps in 406982.1 include AutoConfig in what application level should be running down. Must the application be broken when running "to maintain the Snapshot information?"
  
  (5) one last question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. For example, https://myhost.mydomain.com:5501 / em gives "cannot display the Page. It was working properly last week. In Firefox, the same link works fine. Any ideas how to solve this problem?
  
  Thanks for your replies in advance.
  
  BR,
  TH

  (1) home page is not available because application $CONTEXT_FILE layer always contains the endpoint "https" and ssl settings.

  Workaround solution:

  Change (with text editor) layer Application $CONTEXT_FILE as follows.
  http
  #
  http://myhost.mydomain.com:8000/OA_HTML/AppsLogin
  http://myhost.mydomain.com:8000

  Run the automatic configuration service and application layer.

  Is there a better solution and supported for this?

  No, you must modify the context manually and run the automatic configuration.

  (2) simultaneous managers do not work properly, because they still have old names of node (used in the CFP in the source system). The solution is used:

  1. connect to the EBS GUI web and delete all nodes of all concurrent managers.
  2 shutdown application layer. Check that all concurrent managers have been extinguished. If not, kill the process manually
  3. as a user apps run cmclean.sql
  4 restart the application layer

  Is there a better solution for this?

  You follow the best approach. You could update the details of the server node if you wish.

  (3) database ARCHIVELOG mode nonarchivelog mode changes in the target system. Is anyway to prevent this?

  By default, the quick Clone will create the target in noarchivelog mode database.

  (4) in addition, we would like to make a full clone (app + db levels) of production without closing the application. Is this possible? What would be the best documents to describe it? In Production, we have Oracle Data Guard physical standby installation as per "Note technique Oracle: Business Continuity for Oracle E-Business release 12 Using Oracle 11g Physical Standby Database [1070033.1 ID]. This can be used when executing a clone of warm for the database, right?

  Fix.

  What application layer? The steps in 406982.1 include AutoConfig in what application level should be running down. Must the application be broken when running "to maintain the Snapshot information?"

  You can copy the files from the application tier node, while demand is rising. And, there is no need to stop the application to run "to maintain the Snapshot information."

  (5) one last question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. For example, https://myhost.mydomain.com:5501 / em gives "cannot display the Page. It was working properly last week. In Firefox, the same link works fine. Any ideas how to solve this problem?

  If it works from a browser, then it should not be a problem of EM. Have you tried another client and see if it works? Have you changed a setting in your Internet Explorer browser? Please make sure you add the URL of the EM to the list of trusted sites.

  Thank you
  Hussein

• Question about transition between slides

  Hello

  I have a question about transition between slides in Captivate 6.0.

  By default, the transition between slides is set with 3 dry. I would like to have the transition done manually, with the navigation, but not after a certain time.

  Is this possible? For the moment I insert a next button. But I prefer to do it through the navigation.

  Thanks for your help.

  Hello

  Currently, the ONLY way to do it is to have an object on every slide, causing the slide to pause. Buttons, click boxes, text entry boxes, and some widgets cause this problem.

  If you feel that it must operate differently, please consider submitting a form wishes to request the ability to be added to a future version. (Link to the form wants is in my signature)

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks