Question about dialog Manage Sites.

Similar Questions

• Question about C60 multi-Site Management

  Dear Expert

  I have a question about C60 multi-Site call using C60 as host.

  It there is a choice of layout as Edge 95?

  My opinion of close end site is not in the page layout and I go through a document to the administrator, apparently not metion on selection of layout on several sites.

  C60 is capable of having a provision such as "4-split' 95 edge?

  Thank you

  Best regards

  Tung

  Current version of the software of C60 TC6.0:

  

  You can also make your own layouts using the TC Console:

  http://developer.Cisco.com/Web/Telepresence-developer/tools/integrators/TC-console

  /Jens

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• questions about release management?

  Hi experts jdev,.
  
  Well good morining at all. :)
  
  use jdev 11.1.1.5.0 - adfbc-version management.
  
  question 1:
  
  Sometimes when I give validation (the file that is located on managing versions) is say an error box prompt me "obsolete".
  
  question 2:
  
  In Pendng Exchange (subversion) incoming palette section somefiles are there but do not want the files (thums.db, and for - we) in the management of versions.
  
  I want to delete or remove this incoming section. How I can do. /
  
  updating files each time I had to h keep my eyes too big to do. unwanted files hurt. so I never commit that file...
  
  I don't want this file which is in incoming. is there a delete that option?
  
  can anyone suggest me.

  ADF7,

  you messed up your repository...

  T1) "expired" means that the repository contain a version more recent file you have tried to access your room.
  Solution: before you check in your file, you must do an update of the repository. In the process of updating your files, sometimes destruction, conflict, additions and automatic mergers. There is nothing you can do about it. You are allowed to check in your changes if your version of a file is identical to the version in the repository. If you see a conflict you must merge the files manually (jdev will help with that).

  Q2) you cannot delete files in the incoming changes tab. You automatically get these files the next time that you update the project. See answer to q1.

  To clear the thing a bit, you must remove the thumb.db in the repository: open the browser of Version, open the connect to your storage space, open the project that you are working (for example the trunk) and you should see the folders and files, as in Solution Explorer. Locate the file you want to delete, select it and press "del". Now you should get a dialog box where you can enter a message why you deleted the file. Click OK (or commit?). Now the next time that you update the project in jdev file will be deleted from your working copy too.

  Then, you must configure your jdev so that these files are not placed in the repository in the first place. To do this, you add a template to the list of global exclusions (Tools-preferences-global ignore list). If you want to ignore a specific file (which is currently not in your repositiry) you can select in your project add to .svnignore. To do this right click on the file, select version management and click on 'add to svn:.svnignore '.

  Tips: before you start to clean your repository you make a backup copy of your repository and working copy projects on your pc. It is sometimes easier to remove the project from the repository and check it in once you have set up all the PCs to work with the repository in a way you like. If you go this way, you must configure the project from scratch, which means you need to remove all .svn project folders, make shure you have a version of the project which has all the changes of your colleges. This serves you again master. Once you have tested this new master you can put it again under source code control. Then all colleges check it out from the repository (which they need to delete the old folder before that). Be aware of the fact that the project loses its history in doing so. So there is no way, you can revert to a previous version.
  You need to implement some sort of rule that e.g. every day before starting work to do a "copy of the update work". This reduces the number of conflicts that you get when you check in your changes. IT should not influence your work, you need to do the update working copy before checking in your changes (if you get a stale).

  Timo

• Question about Lab Manager and ESX Resource Pools

  Hello world

  I was wondering if I can get feedback from some of the members of the community.  We used Lab Manager very strongly in our support organizations and it has proved to be a valuable tool.  Recently, we collaborated with the Department of technical training and started hosting online seminars and classes for them using Lab Manager.  Last week we had a fairly large class of users (approx. 45), each duty deploy 2 rather Beefy VMs that were very intensive resources (Jboss, SQL, Mail to name a few).  My colleague and I went through a lot of trials and planning to ensure that our infrastructure can handle the load while allowing our users to date at the same speed and reliability, so that they are used.

  Our Lab Manager ESX server pools made up of the following:

  5 HP DL380 G5 servers with 2 x Quad Core 2.8 GHZ processors (8 cores each) with 32 GB of RAM each

  2 HP DL580 G5 servers with 4 x Quad Core 2.8 GHZ processors (16 cores each) with 128 GB of RAM each

  When the class is running and everyone has made their 2 machines, we noticed for some reason, he was all on ESX2 and 3 deployment (380 s).  Then came the ESX alarms, use of 90% of memory, then more than 100% bringing the disk page.  The CPU usage was at a all time high.

  I look at the 2 580 s and there are about 4 virtual machines deployed on them.

  So my question is...

  How does he know where to launch a Virtual Lab Manager machine?  There's no sense 2 servers have been brought to the red zone, and almost overloaded when the 2 most powerful servers in my farm are nearly dormant.  I noticed sometimes in the past, but not this bad.  Normally, we have about 45-50 computers deployed at some point and it seems to spread them out properly.

  This group of training has access to the same LUN and ESX server with Betclick as any other organization that we have.

  We have decided hosting several sessions of training may be greater than this one and would like to know that the virtual machines will be distributed properly.

  I would like to know your opinion on this

  First to answer your question, then make guess what happens.

  As indicated in response Ilya, LM distributed VMs differently with active DRS resource pools and pools of resources without active DRS.

  LM place VMs when the DRS is not used.

  When DRS is used, we use the DRS admission control to select the host to place virtual machines.

  DRS is turned off, LM uses its own placement routine:

  For each virtual machine, LM filter all managed servers that cannot run the virtual machine. A complete list of patterns are:

  • The managed server has not enough memory or quota for virtual machine to run the virtual machine.

  • The host is not connected to the data store that is the virtual machine.

  • The virtual machine has active state (suspended) and the CPU of the server managed by the waking state has been captured is not compatible with the managed server currently considered.

  • The virtual machine has been a guest on 64-bit and the managed server is not 64-bit capable.

  • The virtual machine has more processors than the managed server.

  • The managed server is not accessible or is set to "prohibit deployments." Not reachable may mean that the lm-agent or its not to ping queries is not answer (this is visible in the list of managed server page).

  Once we have the complete list of eligible servers, we place the virtual machines on the host including the smallest (MemoryReservation % + CPUReservation %). By default, we reserve not CPU on LM VMs, this internship will be largely due to the memory on the host computers if you have not changed the settings of reservation of CPU on your virtual machines.

  For closed deploy to the PF3, force us all virtual machines to go on the same host, so if any virtual machines have any special data store / CPU type specification, all virtual machines is forced to go on this host. If there are conflicting requirements between different virtual machines in the same configuration, deployment will fail. Closed VMs also have another condition to check that is rarely achieved in practice: number of closed networks available on the managed server. By default, this is 20 and you will need more than 20 different configurations closed running on a managed server before you who will strike.  (LM4 allows Cross fencing host, so this does not apply in LM4).

  To make a guess blind because of your distribution problem - if you use the saved state and fencing, it's probably the type of processor.  Processor type can be checked on the host properties page.

  If you not are not I would check that the images can deploy on the 580 s by disabling the 380s and trying to deploy them.

  If you use DRS (which you're not), it could be due to deployment of virtual machines too fast for the algorithm of control for the entrance of VC.  An easy solution for this is to extinguish the DRS on the cluster manager of laboratory.

  We tested load internal repeatedly, the product QA in different laboratories, we run (LM has been used in VMworld Labs for the past couple years and internal systems of training and demonstration for our Organization implemented SE), so no need to worry about this.  I assure you that the first 'real' performance problem you will encounter will be almost certainly due to an overload of your storage array (too many IOPS / s)... and for that you have to distribute content in data warehouses and use techniques of creating paths to balance the load.

  Kind regards

  Steven

  Another thread on this: http://communities.vmware.com/message/1258902.

• Questions about the management of Siebel

  Hey all,.
  
  I have the following questions:
  
  1 - what responsibility / way for Siebel users only read only function on Siebel Call Center (all screens) and Siebel eService
  
  2 - visitors can read only certain statuses in Siebel eService for a Service Request Status (for example, a customer response wait state)
  
  3 - How to manage products in Siebel screen so that I can enter the names of the products and by-products (could rename the Parent product and child fields for products and by-products?)
  
  
  
  Kind regards
  
  Published by: Hamzeh Al-Karmi, Sep 14, 2010 01:57

  Hi Daniel,.

  Well I am fairly new to Siebel as well. Your basic documentation should be Siebel Bookshelf. There is also a lot of useful forums and articles about Siebel to start to learn...
  for the need, you can try searching for a user property called 'on Update Set field' in the library. With its help, you can set a field in dependence of another field. That would be a possibility in my opinion.

• Questions about Enterprise Manager

  Hi DBAs,

  11.2.0.4, RHEL-6, 64Xbit

  Could you please clarify my doubts about EM?

  (1) can we configure Enterprise Manager (NOT GRID Control) in the database pending?

  If so, can you suggest any link/doc-id mos pls

  (2) can us password LOCKING of SYSMAN and DBSNMP after we set 'EM? WT happens if we lock these user accounts after EM congifured?

  (3) if it is possible to LOCK the account without impact EM, can you help me?

  Thank you

  Hari

  (1) can we configure Enterprise Manager (NOT GRID Control) in the database pending?

  If you want to manage a primary/standby configuration, then you want to set up with the grid of EM11g or EM12c cloud control.

  (2) can us password LOCKING of SYSMAN and DBSNMP after we set 'EM? WT happens if we lock these user accounts after EM congifured?

  If you lock the accounts, so you have a functioning EM.

  (3) if it is possible to LOCK the account without impact EM, can you help me?

  Record answer in #2 above.

  HTH,

  Brian

• A few questions about the management of the partitions when you perform a recovery

  Hello everyone,

  I bought a L505-13Z on weeks there are for personal use and editing of audio work light. In these two weeks, I took the time to explore and test the performance of this computer and judged suitable for my needs because it resists even havier audio work so I'll need, what it is tested. I am really satisfied with this laptop! In any case, some optimizations I did for audio software suffered a few necessary features of the computer, so I need to reinstall the operating system... Basically, I was always used to install only the system drive wiping system, leaving the score of "D: Data" intact. I noticed that this is not the case with the recovery of the system, because after the restoration, system partitions and data disappeared. of course everything is saved on an external drive, but every time I have to restore, I need to copy everything back from the backup drive? I missed the point of this - it's exactly like having all my data saved on the system partition. What, then, is the need for the data partition?

  Is there a way to recover and leave intact the partition 'Data'?

  My second question is if it is possible to change the size of the partitions somehow? I think it's a bit pointless to have 230G of free space for the system partition. 100G is sufficient for my needs, and I could use the 130G remaining for the data partition, I don't know why the drive is simply divided into two by default... (I am aware that a change of size of partition must erase all data on the disk).

  Thank you all in advance for any help!

  If you use the procedure of recovery disc HARD - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm - structure and the data on the second partition will not be deleted.
  So, if you want to install OS using HARD drive recovery option you can move all the important data of the C partition to D partition.

  The whole HARD disc will be deleted if you use recovery DVD for installing the OS.
  ----------------------------------------------------------
  You should not change the partition structure because it can have a negative influence on the recovery procedure more HARD drive. It can happen that data recovery will be will be more found.

  Please note: second partition D is not a kind of system partition or recovery. This is normal and usual HARD disk partition. He is saved just Toshiba recovery image in the folder called HDDRecovery.
  You can do it, I did too, it is better to enter the properties of this file and set it as invisible.

  You will not be irritated by this file. It's there, but you can not see and there is no way that you can remove it somehow. Use this partition as usual. Create own folders, copy data here, just do your usual work.

  Any other questions?

• Reprint of the old questions about daily management print app

  Can I reprint already old issues of the daily managers print app? How to do this?

  I agree with managers Daily app impression, then she left issue 510. I want to get them all since the first issue until the current issue.

  Hey,.

  There is no way to go back and reprint old issues.  You can only get the question currently being printed and only when it is available.  Once this time is not available.

  You may be able to find a person who has all the previous numbers that can scan and then send to you however.

  Good luck

  Jason

• A Question about a manager of events & events prior to execution

  This problem came while maintaining an existing VI. If I was starting from scratch, I had the problem diffently approach. (Something I'll probably end up doing anyway).

  I have a 'Next' and a 'Cancel' button and I have a loop of events with cases of event of their change in value which put an end to the first loop. If the next button is True, flow loop produces another similar event with the case for the value events for these same buttons to change.

  So my question is when I hit the next button, while the first event loop was running and the other was not, the second event loop receives the event even if it was not exectuting at the time of this event? If she starts running immediately act on this event which took place before you start running?

  While I'm at it, is it possible to "empty" queue of the UI object before running an event loop? (I don't need to get detailed instructions, just point me to what I have to look it up).

  Thanks and peace

  Roger

  All events in queue of the same events, so data flows from react to them at present.

  Never place the event structures in the areas of code where they cannot be attained within a reasonable period. What you probably need is a single loop and a unique event structure. Use a computer to distiguish state what current code to run. You need to rearchitect your code.

• Question about a certain site features

  Hello

  I am new to Adobe Muse, I learned Adobe reflow and facilitate dashboard, and I need to create a site with a help function that I couldn't find online, the answer no matter what help would be much appreciated.

  The site needs to have two buttons on the button, see image here:

  

  Once one of the button is pressed a gallery is expected to open, I do not want to reload the page, just for the zipper top and open the gallery button like in these pictures:

  

  It is not exactly a scrolling feature and cannot find anything online, so if someone could help or direct me it would be much appreciated

  Thanks in advance,

  Philou

  It could be very simple: just to use a widget of Composition with the two triggers as buttons and the area target to keep the Gallery (probably another slideshow widget). Let initially hidden targets (see the settings under the small blue triangle) and to choose how the buttons should respond. The only problem is how to make these buttons 'push up' as you said off-handedly. Who is the culprit...

  You can leave the targets appear with a melted on top (another parameter in the Panel) triggers, so there is one less a transition. But the shift is not a standard option.

• Question about setting up Site Studio

  OK, so we'll use site studio to generate web pages for our project, but I think I hit a nasty wall that I'm a little lost with. Of what I've read, you can run "site studio.exe" (or something to that effect) out of the windows machine, what University Complutense of MADRID was installed. The problem is the AAU has been installed on a device of based nux and the only way I can access the server through windows is via SSH.  If I am on how to run the Studio Site is anyway around the fact that it's on nux. Or is my hypothesis on the Site Studio even right to start?

  SiteStudio is used to generate Web sites. It is a component that runs on any content server installation, regardless of the environment.

  The file "sitestudio.exe" thingy is an IDE editor that allows you to change the structure of the sitestudio site and other things. It is not required for anyone, except the developer. It's not not to be installed on the server. You can run it on any Windows machine, including your desktop computer, which can connect to the content server.

• Question about exception management

  DB version: 10.2
  
  We have several procedures in a package. All exception handling procedures be made as below
  

  when others then
         dbms_output.put_line(sqlerrm);
         raise_application_error(-20002, sqlerrm);
  end mystoredproc;

  Lets say I have A, B, C and D lined up for execution of procedures. While running, what happens if procedure B has encountered an error and is managed by raise_application_error thingy, it will stop the execution of other procedures C and D as well?

  John_75 wrote:

  We have several procedures in a package. All exception handling procedures be made as below

  Then all your exception handling procedures are flawed.

  The results of PL/SQL engine in an exception explicitly being raised with a unique error code. Your exception handlers that take and change this exception in an error of-20002 code empty.

  It's downright put silly to deal with exceptions.

  There are 3 fundamental reasons to deal with an exception.

  (1) it is not an error of the company. For example to get a NO_DATA_FOUND for a function of product disc0unt is not an error and simply means that the product is not disc0unted. In this case, the exception is removed and applied relevant business logic.

  (2) the error relates to the very specific business logic/rules and can be transformed into a very useful application error. For example, if an DUP_VAL_ON_INDEX exception for this specific code means company error "+ product category already exists + ' and the code returns a unique error code and a message for it.

  (3) protection of resources. For example, a LOB Locator was created and must be released if there is an error, otherwise there will be resource leaks. So, the exception is caught, the resources released (or app error log update, etc.) - after which the exception is relaunched.

  If you can not check one of these 3 reasons for the existence of an exception (in any programming language) handler, then you are most likely all wrong exception.

• Question about the management of data Cache OBIEE 10g / 11g.

  Hi friends,
  
  I have a question: how we can find the display of data in the report (in the answers or dashboard) if Cache or paintings of DW? y at - there no mechanism for this? I know that normally we can find data in tables of aggregation using file view log. Can you please help on this and I would really appreciate your help.
  
  Cheers!
  Srini

  Add the suggestions above, to find the query caches

  1. use followed - cache_ind_flg O/N indicates whether or not the application has reached the cache.
  2 NQQuery.log will show "cache hit" (if not you will see SQL to the physical database)

  There is no mechanism to track if it hits the browser cache / cache of presentation server.

  I hope this helps...

• FDK9: Question about dialog input text (and coding)

  Hi all

  The other day I met a problem which is driving me a little crazy, so I hope a kind soul help me on track!

  When I get a text input in a dialog box, some character combinations (for example the backslash followed by capital F) prove to be scrambled (or at least, I can't understand what the code is supposed to be). It happens regularly, I call a standard dialog via F_ApiPromptString or use F_ApiGetString on an edit box in a custom dialog box. The following example of (micro) illustrates the problem.

  I must be missing something very basic here. I would be extremely grateful if someone could explain why the entry is UTF-8, or MakerRoman.

  Kind regards

  -Mark

  PS: I am running Windows XP on a Danish locale. Nothing particularly exotic.

  [Console output]

  Encoding dialog box is "FrameRoman".
  String #1: '\F' (hex: 0x5c 0 x 46)
  String #2: "ƒ" (hex: 0xc6 0 x 92)

  [Code of plugin]

  #include < fdetypes.h >
  #include < fapi.h >
  #include < futils.h >

  VoidT F_ApiInitialize (IntT init)
  {
  If (init is FA_Init_First)
  {
  F_FdeInit();
  F_FdeInitFontEncs ((StringT) 'UTF - 8');
  F_ApiEnableUnicode (True);
  F_ObjHandleT mainMenuId = F_ApiGetNamedObject (FV_SessionId, FO_Menu, (StringT) "!) MakerMainMenu");
  F_ObjHandleT testMenuId is F_ApiDefineAndAddMenu (mainMenuId, (StringT) "APIMenu", (StringT) 'Test');.
  F_ApiDefineAndAddCommand (1, testMenuId, (StringT) "TestStringPromptCMD", (StringT) 'Test string guest', NULL);
  }
  }

  VoidT F_ApiCommand (IntT cmd)
  {
  If (cmd == 1)
  {
  StringT s1, s2, encName;
  If the user does not change, the "\xfc\x46" string will be returned.
  F_ApiPromptString (& s1, (StringT) "Press OK", (StringT) "\\F");
  If the user types (or pasta in) \F, the "\xc6\x92" string will be returned.
  F_ApiPromptString (& s2, (StringT) "Type \\F and press OK", (StringT) "");
  encName = F_ApiGetString (0, FV_SessionId, FP_DialogEncodingName);
  F_Printf (NULL, 'dialogue encoding is '%s',' encName);
  F_Printf (NULL, "\nString #1: '%s' (hex: 0 x % 02 x 0 x % 02 x)", s1, s1 [0] s1 [1]);
  F_Printf (NULL, "\nString #2: '%s' (hex: 0 x % 02 x 0 x % 02 x)", s2, s2 [0] s2 [1]);
  }
  }

  Hello Mark,

  the FrameMaker IU transforms certain combinations of characters with the special characters backslash, but not all. They are listed here:

  http://help.Adobe.com/en_US/FrameMaker/9.0/using/WSd817046a44e105e21e63e3d11ab7f7862b-7fd5 .html

  Certain combinations of extra backslash are valid in the search box:

  http://help.Adobe.com/en_US/FrameMaker/9.0/using/WS25F3553F-C76C-4f49-9c16-E251912A7D42.ht ml

  If you want your customers to be able to enter the backslashes in a dialog box, they must enter twice.

  HTH,

  -Michael