Question about the color range selection methods similar colors in Photoshop.

Similar Questions

• A few questions about the colors of Patone

  I have a few questions about patone color since it is the first time that I use. I want to use them to create a paper letterhead and business cards in two colors.

  1)

  I don't understand that no sex is more than coated patone washed out colors. I heard that it's because the way paper absorbs the inkt. That is why the same results inkt in different colors on different papers (right?). My question is why is the patone black no sex so different than black normal (c = 0 m = 0 y = 0, k = 100) or black intense:

  

  When I print a normal document with cmyk, I can get pretty dark black color. How is it that I can't have this dark with patone color black color? Even text documents printed on a cheap printer can get a darker color than the color of Patone. He looks way too grey for me.

  (2) a first model, I want to print of patone in CMYK color (since I have like 10 different colors on a page of quick comparison). I know these CMYK colors distinguish the colors of patone and I can't get a representation of 100%. But is there a way to convert patone CMYK values?

  I hope some of you can help me with my questions.

  Thank you.

  You can get shades CMYK Pantone in Illustrator, (Swatches Panel > Open Swatch Library > color books > + PANTONE Color Bridge Coated or lying) but in my opinion, what's the point?  If you print to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use CMYK called "equivalents." from Pantone

  Pantone colors are all mixed pigmented inks, which are fluorescent beyond the limits of the range of RGB and CMYK in particular. The original Pantone Matching System (PMS) was created for the printing industry. He described formulations of ink pigmented for each of its colors.

  Most digital printers (laser or inkjet) use CMYK. The range of CMYK is MUCH SMALLER than many mixed inks, printed on papers either paved or unpaved can deliver. When you specify no sex Pantone ink in artificial intelligence, according to Pantone conversion tables, HAVE "about" what will look like this color on a sheet no bed, try using CMYK. -In my opinion, this has little relevance to the real world conditions and should be avoided in most situations.

  If your project must be printed on a press printing with Pantone inks spots, then by all means, use Pantone colors. But don't trust the colors of the screen; rather get a Pantone swatch book and watch real inks on paper lying and uncoated, depending on the stock you will use on the press.

  With printing decreases rapidly for inkjet and web printers, Pantone has attempted to expand its relevance beyond the traction-date of publication (in the books and software alliances, with one such as Adobe) his old PMS inks and their supposed equivalent LAB and CMYK. I say "supposed" because even once, monitors RGB and CMYK inks can never be literally equivalent to many Pantone inks. But if you go to your project on a printing press printing, Pantone inks are still very relevant as of the "tones".

  I also put my preferences I > appearance of black both display all blacks accurately and output all blacks accurately. The only exception to this may be when you print on a digital printer, where there should be no problem checking.

  Rich black in artificial intelligence is a phenomenon of the screen, at least in the Prefs > appearance of Black, you specify also "out all inks like Rich Black"-something I'd do it EVER do so out for a real printing press. Still, I put my black people in artificial intelligence at the "output All Blacks Acurately" during a press release. If you fail to do so, then the press you will see any minor issue registration, with C, M and look at the back, especially around black characters.  UGH!

  Good luck!  :+)

• Two questions about the color of Lumetri (workspace color)

  The first question:

  Let´s I have three clips on the timeline, left to right, A clip, clip B and C clip. If I place the CTI to clip B and then move on to working color space that I can easily do magic with color Lumetri in the Lumetri color Panel. But, if I decide now that the adjustments I made to clip B would be great to use for the C clip, is there a way to simply click a button or assign a keyboard shortcut that auto-magiquement copy the clip B to the C clip settings? (the clip B to clamp A (or) It would speed up the workflow much.

  Yes, I know that I can copy/paste from the effect options, but given that the Lumetri color Panel is right and options effect is extreme left would be great avoid using the mouse too. Avid Media Composer has this function is very convenient. I guess that Final Cut Pro 7 did not have it. If she had been in Premiere Pro...

  The second question:

  Is there a way to alternate the color of Lumetri power of in Lumetri color instead of the effect controls panel? Yet once, too much mousing for such a task simple. If I select the color of Lumetri in effect options I can use the hotkey "effect on" to toggle color Lumetri or not, but this same shortcut does not work in Lumetri Panel which is odd color.

  Any help is appreciated!

  1. Unfortunately, no.  It's just one of the many features that we had in SpeedGrade have not yet in PP, Adobe decision taken to kill premature Direct relationship.

  2. Fortunately, Yes.  There's a shortcut not assigned for this.  I use the 0, the default key in SpeedGrade.

• Question about the color picker.

  Hello fellow Canadians.

  
  

  I'm running on a question in Photoshop CC today, it all started when I tried to start a new project. Basically what happens is that when creating a new document (Ctrl + N) the color chart of RBG grayscale. I tried to open a new document and checked the profile of color on the Options in advance and saw that it was made gray work: Dot gain 20%. When I go in Edition > color settings: I see that color profiles are on normal parameters...

  I tried everything, but for some reason it does not work. I also saw that before you create a new document, the colors are set to normal.

  
  

  Note: When you try to change the color profile is what I get:

  • Grey work: Dot gain 20%
  • Don't Color manage this Document (this option is always set to gray scale.
  • Point to save 10%
  • Dot Gain 15%
  • Point 20% gain
  • Point 25% gain
  • Point 30% gain
  • Gray gamma 1.8
  • Gray Gamma 2.2
  • sGRaY

  Anyone know what I can do to solve this problem. ?

  There is nothing wrong. No preferences setting is necessary.

  You have just the dialog box new file set to grayscale. Change it to RGB:

  

  This happens when you copied a document in grayscale on the Clipboard (as for example a mask). The dialog box new file reads Clipboard settings and creates the new file accordingly (except if you choose an other presets).

• questions about the depth of Panel with little information in Photoshop

  I was looking at the Info Panel (Windows > Info) in Photoshop CS 6 recently and have a few questions about what I see here.

  1. on the information panel, the RGB values range from 0 to 32768 (15 bits) if I'm using 8-bit or 16-bit.  Why 15 bits?  It is a 2s complement thing?

  2. sometimes I see the CMYK values given as % or 100%.  Sometimes I see the number given with a point of exclamation, i.e. 100!.  I don't know what conditions cause the exclamation points.

  3. If I add a Hue/Saturation layer, the RGB values will display as two numbers, i.e. 32768/32768.

  4. If I'm in 16-bit mode, the info panel displays values of 0 to 32768 as shown above, but if I go to a Committee of color selection, values are between 0 and 255.

  5. my camera has a 14-bit A/D per channel.  If I load a RAW image from this camera in 16-bit mode, photoshop place the 14 bits in the money services businesses?  In 8-bit mode Photoshop just truncates the LSBs?

  I'm not having a problem with this, I just want to understand what is happening.

  Thanks for any idea that you can provide.

  Kevin H.

  Q #1, is 15 bits for faster computations and provide a precise integral environment.

• A question about the color change

  Hello - I have Adobe PS Elements 5. It is the work (drawings), no pictures. I learned how to change the background color in my paisley design. The paisley himself is a white dropout - bit linear background, some solid - against the solid color. How can I add a color to white (foreground) design of abandonment. In addition, if the paisley was a color instead of white, how would change its color? Thanks for help.

  Hi Ryan,

  I think this question might be better suited for the community forum of Photoshop Elements: Photoshop Elements

  Sue.

• QUESTION ABOUT THE COLOR SETTING BLACK AND WHITE

  HI, I WOULD LIKE TO PUT MY PRINTER INK PRINTING IN BLACK ONLY INK BUT WHENVER I TRY TO PRINT POWERPOINT SLIDES, IT WILL AUTOMATICALLY PRINT COLOR IVE YOU GO TO PRINTING PREFERENCES TO ADVANCE SETTING AND SET IT TO BLACK INK. PLS ADVISE. Thank you!

  Hello

  If he please completely close Power Point, to ensure that the printing preferences are set correctly and then reopen PowerPoint and try to print again.

  The Power Point also print dialog click on Preperties / settings and ensure that the settings are done.

  Please let me know if this is useful,

  Shlomi

• Another question about the color in required fields change

  I have 4 fields.

  The customer must enter a country name Field1

  If it's 'NL', that of Field2, Field3 and Field4 becomes necessary.

  I did it with FormCalc

  if (Field1 == "NL") then
  Field2.validate.nullTest="error"
  Field3.validate.nullTest="error"
  Field4.validate.nullTest="error"
  else
  Field2.validate.nullTest="disabled"
  Field3.validate.nullTest="disabled"
  Field4.validate.nullTest="disabled"
  endif
  
  
  

  Here's my problem:

  When field2 and field3 field4 are requered, they change color (red fill color) when it is empty

  And when they are not needed, they did not have to change color

  Can someone help me with this problem?

  Hello

  Here is a sample script to change the visual appearance of an object. Please note that the script in this example is JavaScript. https://Acrobat.com/#d=xHziYOr8zapKWtuVhWUk0w

  Hope that helps,

  Niall

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• A question about the insertion of the localTimeStamp returned the value into a timestamp with time zone column

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  dariyoosh wrote:

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  Then, when you do

  create table t (neck DATE);

  Insert into t (to_date ('1st January 2014', ' mon-dd-yyyy "");)

  Are you surprised that it works? After all a DATE column contains a time component, you do not provide: but he

  works and gives you 00:00:00 as the component "hour".

  Similarly, the timezone component is being developed to automatically with, I think, time zone of your system.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.