[question/help] pool remove the folder in the console view administrator

Similar Questions

• I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and the communication

  I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do

  Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.

• HP Pavilion g6: Please help me remove the Power On password or administrator password

  Please help me remove the administrator password or power on password. The stop code is: 68478111

  Hello:

  Please see the info on the link below which should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/m-p/5010033

• Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

  OT: security.

  Dear community,

  Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

  any help would be appreciated

  Thank you

  Hello

  It's a scam.

  Here are the tips that we regularly give the posters who receive these types of calls:

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• Cannot remove the run as administrator by a program icon option

  Hi, I'm under Windows 7 Home Premium on a PC clean.  I had a problem with a program so I put for run as administrator (the icon properties, box to checked for run as administrator).  The icon of the program now has the emblem shield on it.

  I have problems to remove this option.  Even if the option is unchecked under properties, the shield remains on the slopes of the icon and stills as administrator.

  I also uninstalled the program, reinstalled AND the shield is back :-(

  Can someone help me remove the option so that the program will run again in normal mode... NOT administrator mode.

  What about Paul

  Hi brispaul

  We would like to know the name of the program that has the problem.

  You can probably go to the location of programs where it is installed and remove the current shortcut and create a new shortcut from the source file.

  By default, all the programs installed on your computer are listed in C: Program files

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the Console of Administration Mapviewer 12 c problem

  I try to install and configure Oracle Mapviewer 12 c (v12.1.3).  The installation seemed successful, but after the installation, I am unable to access the Console of Administration Mapviewer 12 c.  The default is Admin Console URL http://[host]:[port]/mapviewer.  I can reach the URL using a browser (Firefox, Chrome, IE), but the admin home page will not appear.  The browser just "turns its wheels"as it tries to load the page. " The image below is from Firefox

  Looking at the console of the developer of the browser (press F12) while the page loads, you can see browse the page of connection repeatedly (see image below).

  

  My environment consists of the following:

  (1) server OS: Linux (RedHat Enterprise 5.11) x86_64

  (2) oracle Weblogic Server 12 c - distribution "Oracle Fusion Middleware Infrastructure"

  According to the documentation, Oracle Mapviewer 12 c requires specific dependencies that will not provide generic install Weblogic Server (i.e. , http://www.oracle.com/technetwork/middleware/weblogic/overview/index.html,).  Instead, you must use the "Oracle Fusion Middleware Infrastructure" distribution, installation of weblogic server and all the dependencies required.

  The distribution of Oracle Fusion Middleware Infrastructure has been downloaded from the Oracle ADF OTN download page or leave cloud of delivery of the Oracle software.

  -Oracle ADF OTN download page: http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html

  -JAR file fmw_12.1.3.0.0_infrastructure_Disk1_1of1.zip

  (3) oracle Fusion Middleware MapViewer Version 12 c (12.1.3)

  -downloaded from http://www.Oracle.com/technetwork/middleware/MapViewer/downloads/index.html

  -JAR file is fmw_12.1.3.0.0_mapviewer.jar

  Following the instructions in the for Oracle Mapviewer 12 c E29624-02 User Guide (http://docs.oracle.com/middleware/1213/core/JIMPV/index.html), first of all, I have installed and configured Weblogic Server 12 c, in Mapviewer 12 c followed.

  I made two attempts of different installation:

  (a) I installed Mapviewer using the Universal Installer

  (b) I have manually deployed an EAR MapViewer exploded in WebLogic Server folder

  Two attempts produced the same results.

  Specifically, after installation and configuration of Mapviewer, I could check the Mapviewer version using the URL:

  http://[host]:[port]/MapViewer/omserver?getv=t

  Immediately access this URL resulted in the expected answer text string:

  Ver12.1.3_B140430.1010

  I could also successfully access the Weblogic administration Console (http://[host]:[port]/console) and confirm the Weblogic is running, and that Mapviewer was correctly deployment up and running as well.

  However, at this point, if I try to access the Console of Administration Mapviewer 12 c via http://[host]:[port]/MapViewer , the Console launch page does not appear (as described above).

  at this point, I wonder why the Oracle demo site works (http://slc02okf.oracle.com) and me does not work.  I assumed that the demonstration site for the Oracle Mapviewer used Mapviewer 12 c.  I based this assumption on the fact of demonstration site for this Orqacle (http://slc02okf.oracle.com/mvdemo/demo/oracle_maps_demo_v2.jsp) displays a header SEO Mapviewer 12 c (see image below).

  

  However, when I questioned the version of Oracle Demo site URL (i.e. ) http://slc02okf.Oracle.com/MapViewer/omserver?getv=t ), I see that they run Mapviewer 11 g!

  Ver11_1_1_7_3_B140717

  So, long story short, deployed anyone successfully Mapviewer 12 c and if so, can you access the Console of Administration Mapviewer 12 c?

  Any contribution is greatly appreciated.

  Wayne

  Hi Wayne,

  Please check that Java is used to start the WebLogic Server. If the JDK 8, try starting with JDK 7 to see if the spin connection problem is resolved.

  Thank you.

  João

• Need help to remove the files from hd to re-import

  I have a problem, I have recently opted for an external hard drive and my files are coming as missing file. Ive has since found the fix for this but I deleted some files and now if I try to import it back I can not/there is not even a folder containing the files or missing tiles. so my question is how do I remove my hard drive so I can reimport the picture? Ive entered my c: drive, but I don't know where to go to from there? the photos in question are all of the same date, so I want to only delete those if possible... Help!

  Double post: missing from photo / not even the thumbnails but said they were imported

• Need help to remove the protection of the family off account of girls

  I deleted my daughter from my laptop Microsoft account. I had the protection of the family there. How can I get the protection of the family out of his account because she has another account set up and know it required a code to get on his google account?  So I would like to remove the protection of the family so that it doesn't keep needing a code. If anyone can help me please and thank you.
   
  * This thread has been changed so that they the title is a little clearer. It will be also moved to a more appropriate forum hoping to teach you to someone who can answer your question correctly.  Thank you!

  Hello

  What operating system is installed on the computer?

  In the meantime, you can visit the link provided below to remove a parental control account.

  How can I remove parental control?

  Hope the information helps you resolve the issue.

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Helps to remove the name of Troj/DocDl-Princeling

  cursor to the iMac began randomly blinking, not allowing the cursor to stay where I clicked and cycling through and menu bars.  I have installed sophos and it has detected a threat that he labeled as 'Troj/DocDl-AUL', sphos has not removed the threat - and the problems continue at random.  F-Secure, Panda or found Malware threat when I ran drive scan using these different programs.  Don't know what else to do.  Any help would be appreciated. OS X El Capitan 10.11.3 running

  According to this:

  Roj https://www.Sophos.com/en-US/Threat-Center/Threat-analyses/viruses-and-Spyware/T ~ DocDl - D.aspx

  It affects Windows. Do you run Windows? If this isn't the case, it is likely contained in / attachment sent by a Windows user. It shouldn't cause any problems on Mac.

  May I suggest that get rid you of all AV software you have installed.

• Need help to remove the parental permission on hotmail acct. my child

  I configured a hotmail account for my daughter with the security setting for the family and I would like to delete the setting and the restriction that I have previous game on his hotmail account if she can add contacts freely without the permission of the parents.

  I've done an update on my setting under authorization parental permission/manage / my child in which account I deleted my child account but she did not reflect change of hotmail account of my child which again shows his account restricted with parental consent.  I even changed the year of birth of my child and see if it would be useful, and it did not work.

  We would really like to keep his email address, but it becomes so unpleasant to use with the parental permission setting.  Help, please.  Thank you.

  Hello

  We apologize for the confusion, in order to remove the restriction for the child's account, you must configure it on the web using the parent account. To do this, please follow these steps:

  1. connect to http://fss.live.com using the parent account.
  2. click Edit settings under the name of the child you want to remove the restriction.
  3. click on Contact Management, it is located on the left side of the web page.
  4. under management of Contact for the child's name , check the radio button next to the child manages their own contact list.
  5. click on the button Save to update the settings.

  If you want to remove the parental control completely on your child's account, please follow these steps:

  1. connect to http://fss.live.com using the parent account.
  2. click Edit settings under the name of the child you want to delete in Windows Live Family Safety.
  3. in respect of the accounts for the name of the child , click Remove the link next to the e-mail address of the child's account. It is located on the right-hand side of the bottom of the page.
  4. new instant message will appear for box and then click Delete the ID to remove completely the relationship on the account.

  Let us know the result later.

  Thank you.

• Helps to remove the HP Pavilion Desktop Hard Drive

  So recently I bought your desktop HP Pavilion from Best Buy a few months ago. Thing was running great until this morning, when the hard drive has suddenly decided to go belly and FRY on me. I called HP Support and they are sending me a free HD to replace the bad, but I need to remove and return them. No problem, I think I'll open the chassis out. Little I didn't know...

  I really don't know who designed this thing inside, but to reach the screws to remove the hard drive is almost impossible for someone like me who has no specialized tools. I got two of the screws, but the front rear one I can barely see and even less to reach, and I don't know there's a fourth that I can't even imagine reaching. I hope someone can give me something special or a detail that I'm missing that will make this possible, if not, I am at a loss how to proceed.

  Here is the info on the machine:

  HP Pavilion Media Center

  Product: KT334AA-ABA

  Model: m8530f

  If it is necessary, I'll post a picture of her womb. If anyone has any info that can help me to disassemble this beast, I would be eternally grateful!

  -Justin

  Message edited by Justin_D on 02/15/2009 16:40

  You must insert the personal media at the front of the computer player. Remove the front panel, remove the screws which fix the cage of the front's personal media players and pull the Green tab by dragging the cage in the front. You will then be able to easily remove the drive.

  Do not hesitate to call HP, they will be happy to help you with the installation of the replacement drive.

• Help to remove the Blue error screen: 0x0000007e

  Original title; Blue screen - please help

  I'm playing a game recently on windows xp. I keep blue screening after that I tried to load the game. I discovered that what initially is that the user-mode driver framework is a failure. I don't know what it means anyway. my error code is 0x0000007e. Thank you

  Hi, BradMJ,

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  http://support.Microsoft.com/kb/330182

  The Windows User Mode Driver Framework (Wdfmgr.exe) service appears in the Windows Task Manager after you install Windows Media Player 10

  Note The Windows User Mode Driver Framework service is a driver component that is used by Windows Media Player 10. The Windows User Mode Driver Framework service supports synchronization of content with hardware players. For example, an MP3 device is a hardware player.

  http://support.Microsoft.com/kb/892552

  How to remove the Microsoft user-mode driver framework

  http://www.ehow.com/how_5175769_remove-Microsoft-usermode-driver-framework.html

• Any help to remove the virus startnow? Im running Windows 7.

  Hello

  I am running Windows 7 and it seems that I am infected by the bug "startnow.  I get redirected to their page without asking for confirmation.  I was able to remove the program file, but it does not solve the problem.  I found a bit about it on the net, but no corrective measures.  I ran the Windows Security Scanner with no result.  Found a step by step, recommend deleting the [random] .exe in the menu of the process in the Task Manager.  I have not found any such process.

  Any help is greatly appreciated.  Thanks in advance
  Don.

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Help me remove the address bar at my screen

  I sent my laptop in for repair and they reloaded windows 8. However, I now have this bar to address extended at the top of my screen and it does not allow anything else on the screen to go full screen. Browsers, e-mail, photos, documents, spreadsheets, everything appears under the address bar which I want to go far. I have browsers if I want an address bar. I put one on my taskbar. I don't have that on my previous windows 8 (or a person helped me remove years ago and I don't remember). How can I remove it?

  I think that the problem had to do with a browser. Microsoft insisted that I upgrade to 8.1 (gave me no choice, not happy that although I was hesitant for me I need to charge a bunch of applications that does not seem to be the case). Once it is I reload Firefox that I use as my main browser and the problem has not occurred. I can't say with certainty it is Firefox, but this is what I suspect.