Question in regards to the script for automatic filling check box

Similar Questions

• The script for any necessary Questions?

  I have a form with a table, and according to the answer selected in the left column, which is a menu drop-down fields in the testament becomes necessary.  Sounds confused when I read that, but what I mean is if someone selects YES in the drop down menu to rows1 and 2 and no. 3-6, then the rest of the fields in lines 1 and 2 become necessary and text must be added or drop-down menus should have a valid response that is selected is not the case in the rest of the table.

  The table looks like this:

  Order book?    Author title ISBN\Publisher Total requested readoptions?   Mandatory?

  (Combo O/N)  (Text)   (Text)  (2 text fields seven.)   (Text)     (Drop down list) (Drop down list)

  1.

  2.

  3.

  4.

  5.

  6.

  The answers become necessary in the sense that they must be filled in before the form can be sent and not in the sense that one can only be filled if the previous is answered.  It might be too much for people filling out the form to ensure that the previous field is entered before proceeding to the next.  The entire table is visible already, so I need the fields become visible when you select YES, even though I see the advantage in this too.  Can I have the scripts for the two formulas, as I can do the fields become visible when you select YES (this text cannot be entered if they choose No.) and had to complete before submitting?

  Oh, another thing I want to do is make 1 selection in a menu drop down not valid.  I have a list of *, YES and NO.  I want to do the * not recognized as a valid answer.  Thank you for your time and patience.  I know that this question probably belongs in the forum script, so I'll add it there too.

  If you ask about the function "setRequired", it is intended to be added to the document in function at the level of the document. To create one, select: Advanced > Document Processing > Document JavaScripts

  Add a new one, giving it the name of your choice, remove the skeleton of the service it provides by default and past the above function code. Then, you call the function as shown.

  If you ask what I was discussing the last paragraph, which would be a new script that checks the fields before sending is permitted to take place. I did not code for this. It would also be a script at the level of the document.

  In addition, you should consider what to do if the select user or not, the rest of the line is finished and then later has a change or heart and selects «*» It seems that it would be wise to clear the values in the other fields on the line, but the script currently does not. If you want to only it and get stuck, post again.

• How can I change the setting on my Apple to change the settings for automatic renewal at normal setting

  How can I change the setting on my Apple to change the settings for automatic renewal at normal setting

  I get a fresh fresh message on my credit card and I need to stop this setting automatic renewal for apple applications.

  If you mean cancel the renewal auto-renewal subscription and then follow these instructions: view, change or cancel your subscription - Apple Support

  (I asked for your message to be moved to the forum of the iTunes Store, where you have posted is for questions about the iTunes U app.)

• How should be written the script for the use of the maximum memory of the guest operating system ever?

  How should be written the script for the use of the maximum memory of the guest operating system ever?

  Please teach the name of the object and the type and order, etc.

  You should be able to do it with the cmdlet Get-Stat .

  Something like that

  Get-Stat -Entity (Get-VM $vmName) -Stat mem.usage.maximum -Start (Get-Date).AddDays(-7) | Measure-Object -Property value -Maximum | Select Maximum
  

  This will return the maximum percentage in the last 7 days for the guests, whose name is stored in the variable $vmName.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Using the script for import and export

  Hello
  
  Can any such a me what is the use of the script for import and export.
  
  After you move the pages from / to server what is the need to import / export command.
  
  export/oracle/apps/ap/setup/webui/customizations/site/0/SetupPG - rootdir < destination path > - user < database username > - password < database password > - dbconnection "(description = (address_list = (address = (community = tcp.world) (protocol = tcp) (host = < host name > (port < port id > =))) (connect_data = (sid = < sid >)))".) "
  
  Thanks in advance,
  Roselyne

  Hi Flo,

  Page and the region are stores in database import/export we really want pages/areas to store in the database.

  Thank you
  -Anil

• I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and the communication

  I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do

  Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.

• How to set up Windows mail to e-mail addresses for automatic filling of my address book?

  In Outlook, the program will automatically fill out address in my address book. In Windows Mail, this happens. Windows Mail will offer one or two fill automatic, but not all of my address book options.

  For example if I enter the letter 'b' in the To: and then I want to see all the entries in my address book starting with the letter 'b '. How to make this happen?

  http://www.Vistax64.com/Vista-mail/154198-AutoFill-Windows-mail.html

  WM remembers only a certain number of addresses of recent emails sent.

  Read the info at the link above relating to this problem of Windows Mail.

  Under certain conditions, Windows Mail saves much less than 29
  addresses for AutoFill. For those who need this feature to work
  correctly, go to WLM. It uses the entire list of Contacts for
  AutoFill.
  http://get.live.com/wlmail/overview

  --
  Gary van, MS - MVP

  See you soon.

  Mick Murphy - Microsoft partner

• by clicking on the apple logo, menus and check boxes do not work on the first click

  Strange behavior from El Capitan OS X 10.11.1.

  When I click on the Apple Logo, menus, and check boxes, the action does not stick.

  To open the Apple Logo, the menu appears quickly but then folds upwards, as if I had not clicked.  Pretty well, click on the third, the menu opens.

  In the Finder, when I click on a menu like file, edit, or display, the menu appears, and then restores upward. Again, after three clicks in opens.

  In Safari, on a page Web, clicking on a checkbox does not stick. I need to click three times.  I when in Safari settings to clear the cache, I also checked the box to request the site "don't follow me." And even in the actual application of Safari, the box wouldn't fit.  I clicked it three times before the box stuck.

  Installation program:

  iMac 24 - early 2008

  4 GB

  El Capitan 10.11.1

  I changed the mouse, and this has solved the problem.

• What is the name of the API for automatic delivery of planned order

  Hi, we do customization for automatic delivery of planned order what is the name of the API for that.

  Best regards

  Sachin

  Hi Salah,

  The API called Auto arrested planned alternate program is msc_release_pk.msc_auto_release.

  Hope that helps!

  Kind regards

  Mohan Balaji

• How to pass the parameter to the script for interface/Package in ODI

  Hello

  Yesterday I asked a question how to pass a parameter to run the script interface or the procedure?

  I don't know if it's possible.

  Any clarification will help you.

  Kind regards

  Mahesh

  Mahesh, why not try this in your machine? This will give you more clarity and confidence.

  ODI has always check if there is any variable used inside an object regardless of the interface or procedure or package. So whenever you generate the script, you will be asked to select the boot parameters. She's. Whenever you use this scenario, make sure you that you add the variables in the additional variables section of the Properties tab.

  So answer is that it is possible.

  Bravo!

• Script for automatic placement of several text files?

  An editor I work with is slowed by a change to their workflow. Maybe there's a whole script for help? I looked but can not find, so I post here.

  Old workflow: Designers would be "automatic formatting" a single Word doc with all the preliminary pages (sometimes > 10 sections of diff.) and chapters and endnotes in a model book.

  New workflow: The Word doc is now divided into 30-40 InCopy files, always destined to a single InDesign layout doc (The InCopy files were created from a Word doc marked by a different system, so that they are all new to the InDesign user.)

  Y at - it a script which, according designers load a square slider with 30-40 (in the right order) files, which will allow them to simple-click on page 1, and InDesign will place one after the other files, autoflowing necessary? They still need them to be placed in individual InCopy files (so would not help concatenate Prime). I don't think that there is never a case of 2 stories being on the same page.

  Thank you

  AM

  Hey AnneMarie,

  This script allows you to select a bunch of files and will try to place them, one by one, in your InDesign document. It will be auto-flux them according to the needs (but be careful because standing in excess of problems - because the script does not test for this).

  I tested with a lot of property, but not with InCopy files because I did not. If they are adjustable as Word documents, the script must run end.

  Let us know if everything works correctly for you.

  // BS"D
  // Multi-file auto-place
  // An InDesign Script by Ariel, (c) Id-Extras.com, 2014
  // This script will allow the user to select a bunch of placeable files (Word docs, etc.)
  // It will then attempt to place and auto-flow all the selected files.
  // The script will start from page 1 of the active document
  // and keep adding pages as needed.
  // It will add text frames as needed, within the margins of the page.
  // IMPORTANT: There is no error-checking for perpetual overflow!!!
  // So, if something you're trying to place cannot fit within the margins,
  // The script will continue adding pages to InDesign until it crashes.
  // To quit the script, press ESC.
  var myDoc = app.activeDocument,
   myFiles = File.openDialog("Select files to place...", undefined, true),
   i,
   currentPage = myDoc.pages[0],
   prevFrame,
   myFrame;
  
  for (i = 0; i < myFiles.length; i++){
   myFrame = addFrame(currentPage);
   myFile = myFiles[i];
   try{
    myFrame.place(myFile, false);
   }
   catch(e){
    alert("Unable to place file: "+myFile, "Multi-file auto-place");
    continue;
   }
   while (myFrame.overflows){
    currentPage = addPageAfter(currentPage);
    prevFrame = myFrame;
    myFrame = addFrame(currentPage);
    prevFrame.nextTextFrame = myFrame;
   }
   currentPage = addPageAfter(currentPage);
  }
  function addFrame(aPage){
   var pageMargins = aPage.marginPreferences,
    aFrame = aPage.textFrames.add(),
    areFacing = app.activeDocument.documentPreferences.facingPages,
    myTop = aPage.bounds[0]+pageMargins.top,
    myBottom = aPage.bounds[2]-pageMargins.bottom,
    myLeft = aPage.bounds[1]+pageMargins.left,
    myRight = aPage.bounds[3]-pageMargins.right;
   //When document.documentPreferences.facingPages == true,
   //"left" means inside; "right" means outside.
   if (areFacing && aPage.side == PageSideOptions.LEFT_HAND){
     myLeft = aPage.bounds[1]+pageMargins.right;
     myRight = aPage.bounds[3]-pageMargins.left;
   }
   aFrame.geometricBounds = [myTop, myLeft, myBottom, myRight];
   return aFrame;
  }
  
  function addPageAfter(aPage){
   return myDoc.pages.add(LocationOptions.AFTER, aPage);
  }
  

• Where can I download the scripts for sample IX, SH patterns for 11g

  Hello
  
  I installed the server Oracle 11 g without sampling schemes. In the standard schema of the sample set, we had an example of information Exachange schema (queue) and a Historyschema of sale. However I don't get the sample scripts for these two schemas in my repertoire of the demo.
  
  Can you please let me know where I can get access to the scripts?
  
  I have a requirement for an OLTP data store that can receive a high volume of data from an external system (Expecting max of 6 GB of data). I decided to create a separate schema, with dedicated storage spaces, it's a good idea to have a data file with a maxsize put 6 GB or to have a set of 3 from 1000 m managed locally and a maximum size of 2 GB each. There is not many necessary index, but I need to set up a queue and on the queue as well. If I create this schema that make them I need to revisit my groups redolog or temp table size as well to keep my performance of existing database intact?
  
  Are there guidelines to follow for a scheme where you expect a large amount of standard data, multiple queues?
  
  
  Thank you very much
  Chauvin

  user13057029 wrote:
  Hello

  I installed the server Oracle 11 g without sampling schemes. In the standard schema of the sample set, we had an example of information Exachange schema (queue) and a Historyschema of sale. However I don't get the sample scripts for these two schemas in my repertoire of the demo.

  Can you please let me know where I can get access to the scripts?

  http://docs.Oracle.com/CD/E11882_01/server.112/e10831/installation.htm#COMSC00002

  >

  I have a requirement for an OLTP data store that can receive a high volume of data from an external system (Expecting max of 6 GB of data). I decided to create a separate schema, with dedicated storage spaces, it's a good idea to have a data file with a maxsize put 6 GB or to have a set of 3 from 1000 m managed locally and a maximum size of 2 GB each. There is not many necessary index, but I need to set up a queue and on the queue as well. If I create this schema that make them I need to revisit my groups redolog or temp table size as well to keep my performance of existing database intact?

  Are there guidelines to follow for a scheme where you expect a large amount of standard data, multiple queues?

  Ask this question in a separate thread.

  Aman...

• You will need to run the script for some ESX hosts.

  Dear team,

  I m connected to 4 esx host, but I want to run the script only 2 esx host asking you to help me how to do?

  concerning

  Mr. VMware

  You could start the script with the cmdlet Get-VMhost to select only the two hosts that you want to output to. For example:

  Get-VMHost host1, host2. Get - VM

  Displays only the virtual machine running on host1 and host2.

• script for automatic export daily

  Hello
  I need a script under linux for autamatic export everyday.pls someone send the script to do this.
  
  
  Thanks and greetings
  Srinivas

  Create an export.sh file and put it in the file using the vi editor and save it

  "Export DD ='date + %m %d hour %M"
  Export DMP_DIR = / u01/export
  Export EXP_DMP_DIR = / u01/export/expdump
  Export EXP_LOG_DIR = / u01/export/explogs

  file name of user and password exp = ${ORACLE_SID} EXP_DMP_DIR/full_$ _export_$ {DD} full .dmp = log y = $EXP_LOG_DIR/full_$ {ORACLE_SID} _export_$ {DD} .log statistics = none filesize = 1048560000 direct = y

  This script will create new dump file every day with the date added in the name of the file

  You can schedule this script using crontab

• Photoshop layer redesign, rename the script for Illustrator

  The Photoshop scripting guru Paul R more to RetouchPro has created a really cool to rename script and layers of selected Photoshop batch numbers. I did find something similar on the side of the Illustrator.

  He gave his permission for me to post it here in hopes that some Illustrator scripting genius could come up with a similar script for Illustrator. It would be terribly difficult to convert into something that could use Illustrator?

  http://www.mediafire.com/file/g7usr73u0236p0a/rename _ & _Renumber_Selected_Layers.jsx

  http://www.mediafire.com/file/dbah74x13bsa74c/rename _ & _Renumber_Selected_Layers.jsx.zip

  

  Hola Julio, I updated the script to rename the sublayers or visible layers and also fixed the color

  

  #target illustrator
  
  main();
  function main(){
      if(!documents.length) return;
      //var allLayers = app.activeDocument.layers;
      var win = new Window( 'dialog', '' );
      g = win.graphics;
      //  var myBrush = g.newBrush(g.BrushType.SOLID_COLOR, [0.99, 0.99, 0.99, 1]); // CS5
      var myBrush = g.newBrush(g.BrushType.SOLID_COLOR, [0.50, 0.50, 0.50, 1]); // CS6
      g.backgroundColor = myBrush;
      win.orientation='stack';
      win.p1= win.add("panel", undefined, undefined, {borderStyle:"black"});
      win.g1 = win.p1.add('group');
      win.g1.orientation = "row";
      win.title = win.g1.add('statictext',undefined,'Rename Visible Layers or Sublayers');
      win.title.alignment="fill";
      var g = win.title.graphics;
      g.font = ScriptUI.newFont("Georgia","BOLDITALIC",22);
      win.g5 =win.p1.add('group');
      win.g5.orientation = "column";
      win.g5.alignChildren='left';
      win.g5.spacing=10;
      win.g5.st1 = win.g5.add('statictext',undefined,'New layer name');
      win.g5.et1 = win.g5.add('edittext');
      win.g5.et1.preferredSize=[250,20];
      win.g10 =win.p1.add('group');
      win.g10.orientation = "row";
      win.g10.alignment='fill';
      win.g10.spacing=10;
      win.g10.st1 = win.g10.add('statictext',undefined,'Serial Number');
      win.g10.et1 = win.g10.add('edittext',undefined,'1');
      win.g10.et1.preferredSize=[50,20];
      win.g10.et1.onChanging = function() {
        if (this.text.match(/[^\-\.\d]/)) {
          this.text = this.text.replace(/[^\-\.\d]/g, '');
        }
      };
      win.g10.st1 = win.g10.add('statictext',undefined,'Length');
      var nums=[2,3,4,5];
      win.g10.dl1 = win.g10.add('dropdownlist',undefined,nums);
      win.g10.dl1.selection=0;
      win.g15 =win.p1.add('group');
      win.g15.orientation = "row";
      win.g15.alignment='fill';
      win.g15.cb1 = win.g15.add('checkbox',undefined,'Reverse layer order');
      win.g15.cb2 = win.g15.add('checkbox',undefined,'Rename Sublayers Only');
      win.g100 =win.p1.add('group');
      win.g100.orientation = "row";
      win.g100.alignment='center';
      win.g100.spacing=10;
      win.g100.bu1 = win.g100.add('button',undefined,'Rename');
      win.g100.bu1.preferredSize=[120,30];
      win.g100.bu2 = win.g100.add('button',undefined,'Cancel');
      win.g100.bu2.preferredSize=[120,30];
      win.g100.bu1.onClick=function(){
          if(win.g5.et1.text == ''){
              alert("No layer name has been entered!");
              return;
          }
          win.close(0);
  
          var sublayersOnly = win.g15.cb2.value;
          var visibleLayers = [];
          getVisibleLayers (app.activeDocument, visibleLayers, sublayersOnly);
  
          if(win.g15.cb1.value) visibleLayers.reverse();
  
          for(b=0; b