Question of multitrack simple hearing

Similar Questions

• Multitrack recording hearing CS 6: how to get access to all the channels on his (RME Fireface UFX) map

  When you try to make a multitrack recording, I get access only to choose channels specified as default entry in the settings preferred channels. Of course, I want to assign a specific channel for each track. Do I did wrong? Any suggestion is appreciated - emergency.

  (Windows 7)

  BR KLL

  Easy - you had to use the ASIO driver, and then it works perfectly. For once I can be absolutely sure of that because I have a UFX here... (best audio device I've ever owned, FWIW)

  You select this option in the hardware configuration of the hearing page in preferences.

• Question reguarding first and hearing.

  Hey... I just have a small question about first Pro CS4 and Adobe Audition. I know that Soundbooth replace Audition in CS lately, but is it still possible take the audio from a video clip in Premier Pro and edit in Audition? Thank you.

  Yes, it is, but the recent thread that Bill said you was the first indication that not all installations operate without problem. In my case I installed first in THE and then installed CS4 MC and 4.2 update. This never caused me problems in hearing, next to edit in Soundbooth. I suspect that the previous problem was caused by some incorrect/broken registry settings. I never had to solve it, so I don't have a solution, but your best bet is maybe to do a repair installation, perhaps even to THE and PR.

• simple question requires a simple answer

  
  

  That number simply represents the number of vi you had open when saving your particular VI.  LabVIEW automatically assigns a numbered icon (if there are more screws open without a unique icon) to every VI that you create.

  You can change this icon by going to your façade, just right-click on the icon and clicking on 'change icon '.  I apologize if you already knew...  But I hope that I have answered your question number.

• Question of Smartphones Simple blackBerry when I download an app, it says that I just left 33 MB

  This is my first blackberry so be patient, I know there are about 90 MB internally on my Blackberry Curve 8330 now I installed via Blackberry App World 4 apps and I mean where the 60 or so go megs. Now, I know there is pre-loaded with apps just delete some of them.

  Sorry for the silly question

  Sorry just read the links, and Yes you can

  Thank you

• Simple question on a simple layout.

  What is the simpler and more intuitive way to produce this provision?

  A two-column table is too old school, but a float: left on the image, the text becomes wrap under itself.

  Can I use two divs and display: inline-block, but it seems silly to put an image in a div (and anything else in this div).

  How to do this with the least amount of code possible?

  Yes.

  Nancy O.

• Question of editing simple licensing

  An offer of license 'simple Édition' kiosk does support? If so, is a technology available push option to send updates revised edition with new issues of periodic magazines free of charge? I would like to develop our newsletter in a style magazine iPad format and publish to the newsstand. This will be a free subscription and I want to use regular notifications of type push new editions of the bulletin that become available, but I wasn't sure if this can be done with a single 'Edition' license or if it requires a license "Professional Edition". If this can be done with 'Single Edition' license, is there additional costs (other than Apple's annual developer fees) as fresh download or any other expenses that must be taken into account?

  No luck at all and Yes, you still need a Mac. Too, it is unlikely to ever change.

  Bob

• question of label simple forum

  I have a question about Flash/Dreamweaver integration. Where can I post it?
  Sophie
  

  Sophia,

  > I have a question about Flash/Dreamweaver integration.
  > Where can I post it?

  Personally, I would probably myself, "is this really a question.
  on the integration between Flash and Dreamweaver specifically, or is it a
  question about Flash and HTML? "If Dreamweaver specifically, I would
  probably post on the Dreamweaver forum. If HTML, I would probably show
  here.

  David
  Stiller (at) quip (dot) net
  Dev test: http://www.quip.net/blog/
  "Luck is the residue of good design."

• Question in the simple drop-down list spark

  Hello

  In my interface, I have a drop-down list. When the user changes the value, I'm throwing up a warning window ("are you sure...'") because the change has a ripple effect. Everything works fine except when the user makes a selection in the alert window, the drop-down list remains open. I tried the "closeDropDown" method, but that doesn't seem to work. I thought it's maybe due to the Alert control, but I don't know.

  Any help or a little nudge in the right direction I can find an answer would be appreciated.

  You can try waiting for the close event set up the alert.

• simple thread question

  Hello world

  My question is quite simple.  I have two text boxes. I wrote "123" in the first text box and 'abc' in the second area. When I put the two boxes, the content in the second box automatically flowed to the first area, because there was space in the first box. Now the first box shows "123abc", and the second box is empty.

  How to stop Indesign automatically cela. Is this possible?  I know I can do it by screwing the two boxes first then the input data, but I have already entered all my data and it save me a lot of time if I can just have screw now.   Thank you very much!

  Simon

  Until you put frames, insert a frame break in all Type > submenus insert a special character

  Then content don't flow from 1 in frame 2 frame when you put on, because you insert a frame break stops at what happens.

• 2 simple questions

  Hi all
  
  I don't know that my two questions sound very simple for one person
  
  I use the CHM format for our help system and the title of the window that appears is 'new window Caption' even if I gave it a title in the project settings. I have to do something to change the title of the window to the title of the project? I have had a look but can't find/setting an option for this.
  
  Also, is there a way to make the CHM file open in a full screen when the user opens it? For the moment, the window that opens is quite small and we had several complaints from customers who, it must be in full-screen by default. Again, I tried to find an option/setting but can't seem to find a.
  
  Thanks in advance for any help
  
  darkagn

  In the project manager, double-click the window. You will find everything you need here to make these changes.

• Audition multitrack playback CS6 to-3dB

  I opened a session today where I worked on the last few days and all of a sudden the multitrack is reading the 3dBs entire session is quieter than any of the tracks are. All faders to zero, fader master set to zero and all the tracks are very limited to-0.2, these paths should be just under the 0 dB mark, and they were yesterday.

  When I open the individual files in the waveform EDITOR they read back to normal levels.

  I can't find anything on this issue which could explain. I even opened the file in 2015 CC just to see if he followed, and HE DID!

  Help, please

  I was just now, will do a FAQ about this, because it is quite a common question. The simple answer is that, for some reason, your Pan right setting has changed.

  By default, the setting of right pan will result in multi-track reading 3dB lower levels than any of a wave-shaped opening file. If, in the preferences, change you the setting of law (logarithmic) "Left/Right Cut" pan and restart hearing, this will not happen - you will get the reading at the same level as in waveform. The default option means on the slopes stereo, you get only the max of any track level if you have panned it hard left or right - it has put at the Center saw takes account of the addition of the dB and decreases the level of mix to account for this. You will notice these days, you have a choice as to how it will go down. There are two schools of thought on this, but the compromise that many people use is actually - 4.5dB drop. To some extent, this is what's efficiency depends on the amount of bass in your swing.

  Problem is that if change you this, you will really have a very good option for fixing right pan and it could potentially overload your mix. I think the most sensible thing to do is either not worry (it is a mixture of FP 32-bit lossless, so that you can make the gain without penalty), or just the value of the master fader to + 3dB.

  If by chance, you make a change to it, and he retained when you reopen the session, then it means that the option is stored in the session file. Without checking, I'm not sure if this is indeed the case. The important thing is to get any change in right pan to work, you have to restart the hearing.

  HTH.

• My external hard drive will not go up and I'm not sure what the question is

  My external hard drive will show up in disk utility, but not of viewfinder. I tried to hit "repair disk" and he says it will take 4 hours, but after a while, that he's finally going to say that it is impossible to repair the disk and I need to make a backup.

  Help?

  Almost always, the question is quite simple: the hard drive is faulty or has failed. So I hope that you have a backup of everything that is on, it is absolutely essential.

• Question regarding the purchase of laptop wireless

  Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:

  1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?

  2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?

  3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.

  I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.

  I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.

  In advance thanks.

  Padraig

  1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.

  (2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.

  (3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).

  I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)

  My home network is a cable modem which is connected to netgear powerline devices (2)

  (via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable

  .

• Simple Web service

  Hi people,

  I'm relatively new to labview, and having not been on any training but am a bit a fish out of water once things get a bit more complex.

  Everything I'm doing is to send a value to a SOAP web service, and then view the response of web services in a textbox control. It seems not too complex, but I must be doing something wrong because this isn't working (good thinking eh?).  Ive tried this using the "Import Web Service" under Tools.  The fine imports etc. but when it comes to adding a control and enforcement of the program I get quickly an error message 1172 which seems somewhat generic.

  I ask a lot of labview here?

  Congratulations in advance for any help/tips

  Rik

  Well, go figure...

  I left after the announcement here and along the evil.  Then I came across this site:

  http://StackOverflow.com/questions/1522782/NET-objects-in-LabVIEW

  I then used the service functionality web as before import and voila! A working web service

  Now I have just to figure why those wrote my boss does not work the same way...

  IM free to answer your questions (keep it simple for now please!) tips and tricks are also always appreciated of course.

  If I have all the new developments I will update if necessary