Question of RAM & SSD compatibility on old office

Similar Questions

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• HP Pavilion 15-AK007TX Gaming: M.2 & Upgrade RAM SSD

  Hello

  I'm looking to add M.2 SSD and max out my RAM from 4 GB to 16 GB, looking for guidance on the compatibility-

  M.2 SSD

  https://www.flipkart.com/Samsung-m-2-series-250-GB-laptop-internal-hard-drive-SSD-SATA-MZ-n5e250bw/p...

  http://www.Amazon.in/crucial-MX300-275GB-internal-solid/DP/B01IAGSDJ0/ref=sr_1_14?ie=UTF8 & qid = 147601...

  RAM-

  http://www.Amazon.in/Corsair-vengeance-PC3-15000-CMSX8GX3M2B1866C10-notebook/DP/B00EQ1PG9E/ref=sr_1 _...

  Thanks in advance.

  HP has not even acknowledged or explained the question to the VAS is therefore no help at all. You can try the drive m2; a few people have reported success.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/M-2-SSD-upgrade/TD-p/5430616/highlight/true/page/14

  Your best bet is greater capacity of 2.5-inch SSD. 1TBs aren't terribly expensive now.

• HP Pavilion 752n - new problem old office

  No sound after installing Windows SP3 and IE8. I removed an unknown driver Multimedia Sound because she had a yellow question mark. I then restarted/started the system found new material still no driver. Once again a point yellow question mark.

  Basic report Everest:

  Motherboard:

  Type of processor Intel Pentium 4, 2000 MHz (20 x 100)

  Card mother name HP Pavilion 752n (P8564A-ABA)

  Motherboard Chipset Intel Brookdale G i845GL

  DIMM1: Smart Modular SM5643285D8N6CHM0H 256 MB PC2100 DDR SDRAM (2, 5-3-3-6 @ 133 MHz) (2.0 - 2-2-5 @ 100 MHz)

  DIMM2: Smart Modular SM5643285D8N6CHM0H

  Type of BIOS Phoenix (10/14/03)

  Communication communication Port (COM1) port

  Communication Port (LPT1) ECP Printer Port

  Multimedia: (I think it's the wrong audio adapter) >

  Audio adapter Analog Devices AD1981A @ Intel 82801DB ICH4 - AC 97 Audio Controller [a-1]

  * Note: I used to have a SoundMax but it disappeared. Thoughts? Ideas?

  I give up... Old office no driver frakin...

  THANK YOU ALL... TO AID ATTEMPT!

  It is a card mother sound card or a matter of PCI Bus. It happened in 2006, BUT all the drivers were available on the HP Site.

  More I mess with the sound the more questions that I create for me. at one point a windows at startup .dll file has disappeared... I couldn't get windows to load even - I have been lucky and figured it out using XP Pro Disc. AMAZING!

  I have an Ipod, Iphone and a laptop, 30 hours over 8 days is enough frakin.

• SSD compatibility w/PERC S300 RAID?

  We have an old PE T110 first generation with a PERC S300 RAID controller and 4x250GB drives. However, because the controller is older, there isn't much documentation about SSD compatibility. Does anyone at - he had success the upgrade of any server/workstation using a PERC S300 with an SSD of any kind in a RAID 10 configuration?

  Finally, I don't remember what type of connector is on the existing disks and am a little confused about the difference between SATA and SAS. What normally comes stock with this system and which would need if I moved to SSD? New cables? Anything else I need to know?

  htc2010

  is it not reasonable to assume I could just as easily swap on each drive in the Bay, one at a time, with a SSD?

  You cannot mix SAS and SATA drives in the same array. Also, you cannot mix HDD and SSD. If SSD does not support the S300, then he cannot know the difference between a SATA SSD and a SATA HDD, so it can work, but 1) I wouldn't rely on it and 2) just know that real RAID controllers, it can be done.

  In the end, I don't know if she will achieve your goals. The reason why I asked is because you could just add the SSD as a new VD, then move the files of database, etc. on to improve the speed, but it sounds like a lot of work for little return. I just invest in a backup recovery solution, good. If it can work in a virtual environment?

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• Hi, FCP my, library, was damaged, i, open, drank of the PCF, library and, he, worked, well, then, my, question is, which, do, with, the, old, library,?, is, again, I, working, throughout, with, the, a, used?, or, should, I, open, Abu, one, i used, each, t

  Hi, my, library, has been damaged, so I have, open, a, FCP BU library and this worked well, so my, question, is, what, do, with, the, old, library,?, is, always, workin g throughout, with, a, I have used?, or, well, I have, open, BU, one, i, used, each, times, I, open, my, project?

  Rename your backup library in order to take account of the original, and then delete the original.

  FYI: Identification will facilitate a slightly different name.

  Al

• Can I use an SSD at an old Macbook in a new Macbook Pro?

  So I got a Macbook 2009 end of 13 ""Unibody"' for awhile and I just bought a new end of 2011 Macbook Pro 2.4 Ghz 15 '." I installed a 250 GB SSD in the old 2009 Macbook some time ago and I was wondering if I could just get that out and put it in the new Macbook Pro?

  I could be wrong, but I believe that the new SSDS are welded on the logic board and not replaceable on the recent Mac I'm wrong however.

• IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

  IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

  You need not buy new Chargers.

  You need to plug adapter American Electric type.

  http://www.worldstandards.EU/electricity/plugs-and-Sockets/

  All computers/Apple iOS devices come with voltage: 100-240 v AC.

• I want to change your security questions and do not know the old issues and thank you

  I want to change your security questions and do not know the old issues and thank you

  If you have an emergency email address you can use to reset your questions. This option of rescue should be on https://id.apple.com after connection and asked for security issues. If this is not leading to a solution, call Apple: Apple for support and service - Apple Support Contact

  Be prepared to identify you as the account holder. They will ask you some things, I can't predict what, but usually the serial numbers or credit card.

• I don't remember my password or security questions, and email recovery is an old, that I no longer use. What can I do?

  I don't remember my password or security questions, and email recovery is an old, that I no longer use. What can I do?

  You will need to contact support in the country where you are (and therefore the country on your account) for questions (and the password) reset: Contact Apple for the Apple ID account security support

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then update your email address of relief for possible future use: on your Apple ID - Apple Support email addresses

  Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

• Transfer from old office for Mac to new Mac Air

  Hi, I just got a new Mac Air and have my old office for Mac on a hard drive. I am able to transfer to my new computer and re - install?

  It really depends on how's old office.  Office 2008, no.    Office 2011, you need to upgrade to a free update specific as explains it my tip:

  http://discussions.Apple.com/docs/doc-8811

  There are free alternatives to the office so

  Alternatives to Microsoft Office

  Documents you should be able to open with any version of office.   It's just the version of Office that makes the difference on El Capitan.

• Stream laptop HP 13: can I put RAM, SSD on HP 13 Stream?

  Please help me because it must increase work flow HP, also the RAM storage, please please guide me how to change the SSD, I especially need RAM, SSD, but will be lost my Win - 8.1? Activation keys?

  If all the guys have this laptop and can kindly take a video to show me how to replace the laptopo SSD and Ram.

  Thank you so much guys ~

  Data sheet: http://support.hp.com/us-en/product/HP-Stream-13-c000-Notebook-PC/7372147/model/7583901/document/c04519650/
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c04501162
  
  Always on edge and not extensible.
  
  Concerning
  
  Visruth

• reuse the license of Windows XP from the old office to the new office

  We have 4 old desktop computers with windows xp I want to reuse the license of Windows XP from the old office to the new office

  I bought a HP desktop computer and dell preinstalled with Windows XP. The office has not worked for a few years, he has the processor are P4 and slow work.

  I recently bought a desktop computer and wanted to know can I use the same license key to get Windows XP installed on my new desktop computer.

  Note: I have lost my original installation of windows CD but have the office and Windows XP product code is available to me.

  The old HP desktop and dell came with a license with the sticker on the side.

  Any PC which came with a sticker with a key to activate product on it has a license that is related to this PC (and only this PC) for ever. It is not legal to install on a PC using the key videos from another PC.

  If the PC you want to install XP on still has its sticker, then as much as you have a compatible installation XP CD, XP can be re-installed using the key on the sticker.

  Only commercial versions of XP can be moved from one PC to another. With the commercial versions, the activation key came with the media, not on a label stuck on the PC.

• How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens.

  LAN and WLAN connections

  My old wired desktop xp died, it was the first computer on my home network. My friend just got a new office and gave me an old. I have a laptop which has windows 7 and is connected wireless. It is still plugged in and works fine.  How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens. When I go to internet connections, it shows that it is connected, but I can't seem to connect. Help, please!

  Hi ShannonStrong,

  ·         What exactly happens when you try to connect to the network?

  ·         You receive an error message or error code?

  You can follow the steps in the Microsoft Knowledge Base article mentioned below and check.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  You can also see this article:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Note: The article also applies to Windows XP

  Let us know if this information useful.