Question on DNS entries for the grouping and the call

Similar Questions

• vCenter log files entries for the new virtual machine or distributed groups of ports

  All,

  I can't find the entries for the new virtual machine or distributed groups of ports in the vpxd.log file.

  Any suggestions?

  Thank you

  This kind of info are in the DB vCenter.

  Not in the logfile (used for debugging purposes).

• DNS settings for the intranet server is not not a DNS

  I have an OS X server that services the on the local subnet (behind a NAT).  We have moved to a new office and installed a new firewall / local DNS and all other machines can resolve names of local computer.  But the OS X Server solves only them to the machine gateway/firewall, rather than solve them for local machines.

  If I disable the server App DNS, resolved names.  But I seem to remember that I'm not supposed to do disable the OS X Server DNS, set it instead to forward requests to the gateway.  Unfortunately the Google Machine isn't helping me, because every sentence google I can think on OS X Server and DNS settings show how to use your OS X Server as a DNS server for the computers on your network - which is not what I want to do!

  Which, in my view, should run is listing the gateway as a forwarding server, then tell machine OS X to "Search for only some clients" and "The Server itself" selection in the dialog box "Edit Search Clients.  But it does not work.

  Any help appreciated, thanks.

  Two things you need to do:

  You must configure the host/domain name on the server and/or point the DNS address in the network preferences for 127.0.0.1

  Once you tell the server to perform searches in its own recursive cache/internet to 8.8.8.8 * or your dns public server here *, then it stops to pass requests to the gateway.

  Then set your DHCP server to serve IP addresses in DNS (10.0.0.5) servers to clients.

  Example:

  * Client DHCP address request *.
  10.0.0.10 - IP
  255.255.255.0 - mask
  10.0.0.1 - gateway
  10.0.0.5 - DNS

• Copy the registry entries for the cookies saved from Windows XP to Windows 7 on the new machine.

  Original title: the registry entries for the saved cookies

  Can someone tell me where the registry entries are saved cookies?  I want to copy those to my new PC so I don't have to manually enter the web address.  I created the privacy to block all cookies and manually authorize those I want.

  I'm spending XPSP3 to Windows 7 on the new machine.

  Hello bbran,.

  Can someone tell me where the registry entries are saved cookies? I want to copy those to my new PC so I don't have to manually enter the web address. I created the privacy to block all cookies and manually authorize those I want.

   If you use Internet Explorer, you should be able to select the file and select "import and export" to move this.  Everything you have saved is located in your profile.

  Please let us know status.

• Obsolete devices in the AutoPlay list & several entries for the same devices II (how to remove Iphone in Autoplay device)

  I read the article "obsolete devices in the AutoPlay list & multiple entries for the same features" and did what they said on the registry change, but I can't seem to find what I'm looking for.

  I had an iphone and he sold on ebay, now in my autoplay menu, there is my iphone device listed in DEVICES. I would like to remove it, but there is no option to do this. I looked everywhere in the 'managers' and 'eventhandlers' regedit, but I can't find the name of my iphone or whatever it is about the iphone in particular. So I hope that someone could lead me in the right direction and it would be very appreciated. Is there a specific code or name for the iphone in regedit?

  Hi arande1a,

  I would like to know what article you're talking about, please give the link for the same.

  I suggest you try the following steps:

  Step 1: Disable Autorun

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) turn off the AutoPlay use for all media and devices check box, and then click Save.

  Restart the computer and check.

  Turn on AutoPlay

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) select the game to use automatic for all media and devices check box, and then click Save.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Let us know if you find iPhone mentioned in the following registry key location.

   

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\ device management

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Entry of the appellant for the call manager does not to the first entry, books on the second

  Unity 4.0 (4) SR1, 7.0 (4) flat TSP

  Have a call handler when option 4 as input, the appellant and the user calls into customer and they get the welcome message, but when they hit 4 it does not first time. Replays of greeting and they hit 4 again and it works fine. 4 is set to go Manager directory. 4 is a key blocked under the entry for the appellant. This happens whenever they call and get the salvation of the unit.

  They have 2 extensions 4xxx configured on the system also.

  The unit probably behaves correctly. To confirm that the unit made, turn on the microphone traces PhraseServertoMonitor and watch the appeal on PortStatusMonitor.

• How gemfire locator can be configured to return the full DNS name for the customer?

  We have an index running before 2 cache servers,

  Locator.DomainA == > Server1.DomainA, Server2.DomainA.

  the problem is when the customer (customer. DomainB) try to access gemfire via locator, it up ' get: not connected to GemFire' exception, the reason is that the Client.DomainB uses the full name "Locator.DomainA" to access the gemfire, the Locator maintains only the servers host name, when the client runs the query, it access Server1 or Server2, but in this case, the networking is not connected.

  How gemfire locator can be configured to return the full DNS name for the customer?

  in gemfire.properties, Locator attribute is full domain name already.

  Thank you

  Yao

  There is a parameter for hostname for the customers that you can put in your cache.xml file cache-server element. It is a string that is passed the server for the location, and then on the Locator for the customer. You must set this client-to-host name in each of your cache servers.

• Journal entry for the Runtime Error FDM

  Hi all

  I'm trying to run a Script to load batch Standard, but I still have the same error.

  I realized a FDM Appication, loading bacth script and data file (with that name 1 @JDE@Actual_Inp@August@RR ).

  Adapter, import formats, maps and location seems ok.

  THIS IS THE ERROR LOG:

  * Start the journal entry for the Runtime Error FDM [2013-09-24 12:59:06] *.
  -------------------------------------------------------------
  ERROR:
  Code............................................. 6
  Description... Overflow
  Process... clsBatchLoader.mExecuteParallelBatchProcess
  The component... upsWBatchLoaderDM
  Version.......................................... 1112
  Thread........................................... 4100

  Could someone help me?

  Thanks in advance

  Andrea

  Hi Andrea,

  Are there more entries in the log? In addition, you can load the file via the manual process?

  Kind regards

  Thanos

• Hook the user to create the entry for the item

  Hi all
  I'm working on R12
  I have a requirement to create an entry element as and when a record SIT is created with a particular segment of this record with a special code.
  
  something like segment1 = backward and segment2 = approved
  
  I need to create an entry for the item when a record SIT is created with segment1 as arrears and approved segment2.
  
  I'm looking at the approach of user hook... How is it possible?
  
  Enjoy your entries...
  
  Thank you
  SRS

  Open the form when the user to enter the SIT.

  In the menu help--> diagnostic-->--> personalize a custom code.

  Enter a description for your extension, and then set level - to play safely so that it fires for the entire organization.

  Enter the trigger event, before INSERTION. Condition: SIT.NAME = "your name to sit here."

  Action tab
  Type: Builtin
  Builtin type: run a procedure
  Argument: name of the PLSQL procedure

  Maybe you can add a message before and after all to all, for debugging.

• Hi, how can I find my serial number. Information transferred by time capsule of MAC, unfortunately ex recording was fake email, no entry for the adobe ID

  Hi, how can I find my serial number. Information transferred by time capsule of MAC, unfortunately ex recording was fake email, no entry for the adobe ID

  I sent you the details required in private message.

  Please use link below to download Lightroom 6:

  Download Photoshop Lightroom

  Let me know if it helps.

  ~ UL

• BlackBerry Smartphones unable to highlight the entries in the call log

  Hope this isn't a stupid question.  I am new to the storm and the forums.  I had my storm for about a month.  Just realized that when I'm in phone mode and do up the call log screen, the entries don't "highlight" when I finger scrolling on the entries. So now I can't tell which entry I am on to reconstruct because it won't highlight.  I would appreciate any idea on how to restore the ability to highlight.  Thank you!

  Hi and welcome to the forums!

  You should have the ability to highlight an entry in the call log screen.

  Try a battery pull:

  No data will be lost when you do the following: remove the battery while the device is activated. Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.
  Thank you

  Bifocals

• PowerShell script to change the DNS entries for all hosts

  Ive tried many others which have been posted on the web and none work... Someone at - it a script to change the DNS entries on all hosts?

  OK, changed a few pieces my end, it worked but now it's... Try this (50% confident

   $dnsServers = ("192.168.111.3","192.168.111.4")
  
   Get-VMHost | Get-View | %{
      $ns = Get-View -Id $_.configManager.networkSystem
      $dns = $ns.networkConfig.dnsConfig
  
       $dns.Address = @()
       foreach($server in $dnsServers) {
         $dns.Address += $server
     }
     $ns.UpdateDnsConfig($dns)
   }
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• When I add a bookmark, I get hundreds of multiple entries for the same bookmark in the recently added bookmarks folder and the bookmark tab. Difficulty?

  Adding a results of bookmark in 100's of entries for this bookmark on the Bookmarks tab and in the recently added bookmarks folder. The only way to remove them is to click and delete each separate entry? Any idea what is happening or how to fix it? Thank you.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

• My music player has more than one entry for a song and when I buy a song or download to the reader I'm going to finish with three entrances.

  Original title: getting copied songs and resumes somehow

  Because of the settings or something my music player has more than one entry for a song... so when I buy a song or download from my phone to the player so I'll finish with three entries... on an album of 10 songs I get 30.  3 of each song... even with pictures... is it a setting or is there a way to automatically set the drive remove the redundant songs and photos?

  Hello

  1 Windows operating system you are using?

  2 are you facing issue with Windows media player?

  If you are facing the issue with Windows Media Player, you can try the following steps and check if it helps:

  Method 1:

  You can delete the Windows Media Player database and check if the problem persists.

  Step 1:

  a. exit Windows Media Player.

  b. click Start, click Run, type %userprofile%\Local Settings\Application Data\Microsoft\Media Player in start searchand then click OK.

  c. Select all files in the folder, and then click delete on the file menu.

  Note: you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  Step 2:

  a. exit Windows Media Player.

  b. click Start, click Run, type %LOCALAPPDATA%\Microsoftand then click OK.

  c. Select the folder Media Playerand then click delete on the file menu.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  For more information, see the article:

  Method 2:

  If you are using Windows 7, you can also try to launch Windows Media Player convenience stores on the library and check if it helps.
  Convenience store open in Windows Media Player library

  Method 3: How to prevent duplicateor entered invalid frombeing added to mylibrary during playback of music files?

  When you move digital media files on your computer, the file name and file path information remain unchanged in your library. Then when you select a file to play to its new location, a new entry is created in your library if you select the option automatically added to your library when played. As a result, your library can quickly contain a large number of entries, duplicate or invalid.

  To prevent it be automatically added to your library of music files
  a. in Windows Media Player, on the Tools menu, click on Options.
  b. on the Player tab, clear music to add to the library when played check box.
  Now, when you play music on your computer or the Internet, the file will not be added automatically to your library.

• Try to set up Time Machine, and I get this error; Keychain 100001 error while creating a system Keychain entry for the username "JGarrett" and the URL ' afp://JGarrett@JPG Capsule._afpovertcp._tcp.local./Data time airport.

  Have cleared airport Time Capsule and factory reset after getting this message.  Don't know where to go with it.

  Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.

  1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags norestricted /V*/*/L*/Keyc*/*

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo xattr -c /L*/Keyc*/*

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.