Question with a bubble chart

Similar Questions

• Labelling of bubble chart

  I have a bubble chart where each doctor is its own bubble, and I have about 18 bubbles.
  
  Is there a way to make the labels on a bubble chart be the doctor's name, rather than the number of cases doctor eash? With 18 bubbles, it is difficult to tell the legend, what color corresponds to what bubble, as many colors is similar...

  Have a look here:

  http://obiee101.blogspot.com/2008/01/OBIEE-XY-and-data-in-mouse-over-label.html

  concerning

  John
  http://obiee101.blogspot.com

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• problem with label pie chart!

  Hello

  I found this example of chart areas, I tried to use several pie charts, but the place of the label to move in a table. It shows the place moved down when using the vi.

  I've attached an example with 4 pie charts and sometimes it shows the 4 places and sometimes down to one. No way to adjust it?

  I would like to see some examples with the 3d pie chart. Do you know any example?

  Thanks in advance!.

  Fred

  Sorry guys! I got it.

  Change the first time call to the comparison of the loop For = 0, so always start with the value set to draw the square.

  

  Thank you.

• a question with interface Runnable?

  Hi all, I have a question with the Runnable interface.

  public void TestFunction(Rnnable rn){  rn.run();}
  
  //create a Runnable objectRunnable new_runnable = new Runable()
  {
    public voi run()  {     //do some thing...  }};
  
  //Call TestFunctionpublic void main(..){   //do some thing...   TestFuntion(new_runnable); /*Will this call make new_runnable run on separate thread? */   //do some thing...}
  
  
  

  My goal is to create a TestFunction with the setting is another function to perform, and I want to run on the same thread.

  If I use passable is a parameter, it will be Runnable.run () run on separate thread or the same thread by Thread that calls TestFunction()?

  Thank you very much!

  Yes, it runs on the same thread because you call the run method directly if you want it to run on its own thread you need to run Application.invalokeLater (runnable) or UiApplication.invokeLater (runnable) or pass to a thread object Thread (runnable) m:System.NET.HttpListener.start (new).

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Yes, individual licenses, ranging up to allow two simultaneous, activations facilities.

  subscriptions allow mounting on an unlimited number of computers.  connection is limited to a maximum of two computers at a time.

• The bubble chart title

  Hello
  
  I want to divide the title into 2 lines for a bubble chart in obiee 11g. How can I do that.
  
  Thank you

  Hello

  You can use the narrative view to achieve.
  The line break to divide it into 2 lines.
  This narrative point of view allows to act as the title.

  Thank you
  Vineeth

• How to create a bubble chart

  Hello
  
  I have a requirement of the customer as follows.
  
  1. the project_name on Y_ axis
  2. the Project_stages on the X axis
  3. the bubbles is the estimated_cost (measure) of each project and its cost at every stage.
  
  Is this feasible? Or can you suggest something along these lines.
  
  Thanks for your time and your help.

  Hi ssk,'

  can u make reference to these?

  http://obiee101.blogspot.com/2009/05/OBIEE-bubble-chart.html

  http://obiee101.blogspot.com/2008/01/OBIEE-XY-and-data-in-mouse-over-label.html

• Several questions with PPCS4

  Aloha and everyone,

  I have several questions with PP - CS4, they are:

  (1) the Sony HC-7 & 9 are not expressly listed in the Group of Capture Settings tab, "Device Control > Options button > device brand > Sony > DeviceType ' why?

  (2) my Sony HC - 7 camera is online, the Capture Panel is open, the settings tab is selected in the capture settings window click on "Capture Format HDV", the button modify immediately below appears and opens a dialog box, the value default "Format of Capture" bed "HDV", to the immediate right is a button "PARAMETERS of HDV.  This button is active, but when you click on it, there is no response.  This button is supposed to operate alone or do a bug?

  (3) a clip was made in the encoder and classified by subject for later use, including possible placement on a URL of stock footage.  This clip can be reused and essentially rendered again for use in a DVD or for placement on u-tube.

  (4) after washing of the gases through all clips in a "specific timetable", I want to move to a 'sequence' I titled "FRONT BEING RENDERED.  Cut / paste does not work to navigate between the sequences.  Is there a way?

  (5) in the timeline panel, after washing, I renamed the clips and added code comments.  When I export the clips thru 'Encoder' element names are lost in the process.  "Encode" supposed to work this way?

  (6) in the opening "encode". the upper part of the widow of the display indicates "drag - move clips or use the Add button", but when I go back to the timeline to select clips, I'm prevented drag / drop.  What I am doing wrong?

  It's enuf for now.

  mahalos much help...

  Cut & paste does not work to navigate between the sequences.

  It does for me.  What happens when you try?

  When I go back to the timeline to select clips, I'm prevented drag / drop.

  Drag-and - d├⌐poser is for real media files, no clips in first.  To add first, you can either export > media first, (the normal way when the first is opened) or using the command line of SOUL, to add a first sequence.

• FCPx exports to Youtube - questions with loading only in Safari

  This is my first Apple discussion forum post.

  Have a problem where * some * of my FCPx (v 10.2.3) exports video to Youtube works perfectly with all browsers except Safari, the video stops just loading (do not buffer or load beyond some arbitrary point). Unable to determine the source of the problem. Initially he was out of the question. Of late, it has become a recurring. Have tried different options trying to take the question of the end of the video, and in terms of export options wrong, but seems to make no difference. I am unable to find a common cause, aside from the Safari browser. Anyone else having this problem?

  Perhaps if there is enough people experiencing the problem. May be able to report the problem to the right authorities.

  Thank you.

  What OS? Can post you links to videos of problem?

• Two questions with Satellite A300-18

  Well, I have a Toshiba A300-18 and when I use it for a long time, about five hours, for example, the programs seem to "freeze" and I can't work on it or open up new. Another problem is when I try to stop the laptop because the screen turns off but the lights remain and the computer didn't stop and rest as it until what I stopped it manually with the button WORKS. I tried to recover the factory values, but it stills equal.

  (Sorry for my English, I'm Portuguese)

  > when I use it for a long time, about five hours, for example, the programs seem to "freeze" and I can't work on it or open new ones.
  It sounds like the laptop could freezes due to a higher internal temperature.
  The high temperature could affect the functionality of memory and it would lead to this issue.
  Please check if the vents are free of charge and ensure that there is enough free space around the laptop to ensure good air circulation.

  Conversely, the temperature can arise at a critical level if n t cooling modules work as it should in this case the technician must check the laptop!

  The second questions (the screen became black) could be resolved by the BIOS updated.
  So check to see if a BIOS update is available and if it is possible

  Best regards and good luck

• Grafik question with my Satellite 3000 514

  Hello people!

  I have two problems with my S3000-514:

  1.
  Sometimes, when I am arround 10 minutes has the laptop computer, the LED
  on the screen turns off and I can only see the dark symbols and the screen is almost dark. I have to restart the laptop and but the electrecity it works.

  2.
  When I start a paint program or a program that needs a lot of work grafik-basket, the screen freezes. After a minute, the screen has only one size of 640 * 640 and only 8 bit. WINDOWS indicates that it has had a problem with the grafik-cart driver. And: Yes I have tried with the newes GeForce 2 and all drivers for this basket I found on the net.

  Where is the nice guy or gal who can help me?

  Thank you

  [Edited by: admin]

  Hello

  The first question looks like a FL-inverter malfunction. But he s strange that after reboot it works again.
  Maybe it s not the Fl inverter but dysfunction of the graphics card?
  This would clarify the problems of graphics card driver.
  Well, it's not easy to say why t happens. These are just my suggestions.
  Some diagnostic tests are required to get an answer exactly.
  I recommend you contact the service partner.

• Recharge in question with Elitebook 6930p

  Hello forums HP, I had to come back here and you guys/girls ask a question on the Elitebook series and the battery not charging issue. I recently bought this laptop to replace the other two laptop computers HP garbage that we had here. The DV9005 was a total waste of money, and the compaq CQ50 wasn't much better either. This elitebook, however, was a more decent experience to use fortunately.

  Now this is not a brand new laptop, yet once just cannot afford to pay hundreds of thousands of dollars for a computer.  Anyone who does, well good for you.

  On the problem, when I got the laptop it didn't load or a hard drive adapter. I have a spare empty the drive to use and bought a generic adapter. A week later I ended up finding an official adapter brand by HP because I thought it was the problem.

  While using the generic adapter the battery would sometimes for free and sometimes no fees make about 97 to 98% and refuse any charges no load in addition, you use the adapter to generic China crap. I've tried everything I could think and followed the guides on the internet. Back in removing the battery, uninstall the drivers in the device, reboot without the battery Manager, then put the battery. These tactics were all hit and Miss and worked but only for a little while. I pulled the hard drive from the compaq system and used in this one before getting rid of Compaq. He still had the original install Windows on it and after all troubleshooting I thought hey "must have a problem with the old drivers of material to the old system, that the reader was.  So finally, I got an official charger (battery checked also great in the HP Battery Check software).

  So with the new charger, I formatted the hard drive and installed Windows 7 x 64 ultimate again. Then let the installer and Windows Update find all drivers, and with that the problem seemed to have disappeared.  I had to manually install some drivers, such as ATI and the fingerprint reader drivers (I don't use it however). It has now charged to 100%, but sometimes his didn't. By that I mean I have to let the battery discharge below 90% (89% and less) until the system takes care of the battery.  Is this normal? Should not charge the battery back up no matter what percentage the cells are to, or is it some sort of feature that I quite simply not aware of? Another thing is that sometimes the battery may charge very quickly, and sometimes drag on for hours. Also a high-pitched hum can be heard when it is loaded, as you can hear electricity do something. It's the best way I can describe it.

  I must point out that I have updated the bios and until recently was installed some (not all) of HP bloatware, like buttons to quick launch, battery check, the software Center of shit for the info on the quick launch Panel button. I don't have that sounds good, as many processes running for a single piece of hardware. I avoided all other apparently non-essential pilot updated on the HP site. The HP software all created about 7 quick launch buttons and the automatic update processes. I found this unacceptable and removed all of the HP software, the system works very well with it. The only thing that is weird is the battery and plugged her in State of charge do not. It load properly for days until what I removed software, even when she was only a few percentage points lower than the threshold 100% charged. Now it's back to the way it was under the generic charger, so I suspect that the generic charger works fine and something else is the problem.

  Is in charge of the HP software required for a normal and regular battery? If that's the case it's a bit concerning, when I buy a product that the product becomes my property not sellers more and the fact that your 3rd party software may be needed for normal operations is a slap in the face for consumers worldwide. While I appreciated the attempts of HP to automate and dumb down everything for users who do not know what that make them. You should consider that not everyone needs or wants that such automated support and good marketing system of the factory. Maybe in future models you will not install the default HP software.  The mouse pad has for example, a driver and a process for him. I can see for the process and it's okay to have because it's necessary if I want to use the track buttons built based on scroll, among other things. Connect the buttons to quick launch to load batteries (if that is what is happening here) has been/is a horrible idea.

  Please correct me if I'm wrong about all this, I'm waiting for you response to the issue of the battery charge and will provide more information if necessary.

  Hello @Britton1981

  To get your question more exposure I suggest you post in the trade forums since the [PRODUCT] is a commercial product. You can do this here laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP EliteBook 6930p basic Notebook PC model.

  I hope this helps!
  Thanks for posting on the HP Forums.

• Two questions with Equium P200-178

  Hi all

  I've owned my faithful * P200-178 * (PSPB2E-001002AV) for a few years now with no problems until recently. It has windows vista Home premium installed.

  First of all the built-in wireless (PA3613U-1MPC) stopped working after that a "friend" he fell! The switch works ok, but the light no longer works. I reinstalled the driver and it did make a difference. A message appears saying that the wireless adapter was not installed during the installation of the software. I even tried a model from the same wireless adapter and it does not work. What is strange, it is when you use free configuration that he knows that the switch is either on or off, but can't find the adapter. The Device Manager also can not find.

  Second, after that my children has uploaded an image to their homework the notebook had a nervous breakdown! I have all the latest antivirus software and check the system on a regular basis. The image has been printed and has now been removed. I used to put the laptop and turn it off with the power switch and not by windows, stop facilities. This no longer works. After lifting the lid, press the power button / nothing happens. However pressing the icon of music "in a box with 6 Sparks coming from it" (sorry for the pathetic description) the portable lights. Windows Vitsa appears and first seems to be ok. During boot a message saying:

  Checking file system on \\?volume {ef *-long serial number not shown in the case its unique-806 *}
  The type of file system is NTFS.
  volume label is winRE.

  One of the drives should be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue
  Windows will now check the disk.

  CHKDSK checks the files (etc, etc, etc.)

  File segment 24,25,26 and 27 are unreadable, are repaired (I think that the info is too fast to read) and possibly boots. The laptop restarts now, too.

  WHAT CAN I DO IF ANYTHING TO SOLVE THESE PROBLEMS / QUESTIONS?

  Thanks in advance

  Hello

  In my opinion in the first case, there must be some physical damage and I do not think there is something you can do to fix it. I guess that laptop must be disassembled and port/switch WLAN must be controlled by technicians.

  About second question I can not say much, but in my opinion you should back up all your important data and reinstall the OS using recovery media delivered. With clean OS preinstalled, you can test the WLAN functionality again and the functionality of the power button.

  I know that this is a more radical method, but do what you will be able to test the functionality of the laptop with the State factory and without some strange files or entries in OS preinstalled.

  What do you think of all this?